KZhead

tire explosion bead setting

PCFLQTLF
2017 ж. 5 Там.
9 931 253 Рет қаралды
Жүктеу

couldn't get my tires to set on the rim so I read n watched a bunch of stuff n this is what I's able to do...

Пікірлер

  • I had some bad experiences with this method so I finally bit the bullet and bought a 5-gallon bead seater blaster, that thing seats a bead like nobody's business.

    @8307c4@8307c43 жыл бұрын

    • Pretty funny isn't it, the proper tools work and are safer. Almost like that's what they were designed to do

      @leightoncollins3704@leightoncollins37043 жыл бұрын

    • @@leightoncollins3704 You and Pascal are this close from getting kicked outta the Danger Rangers.

      @TheMrTslab@TheMrTslab2 жыл бұрын

    • Honestly. That’s all we got and we set any bead we need to do in our shop from semi to even lawnmowers that won’t seat with a quick blast of air from the tire machine.

      @keeganholt281@keeganholt281 Жыл бұрын

    • Yeah except you better fuckin be wearing some earplugs unless you want permanent tinnitus

      @user-gd4gs6bn9o@user-gd4gs6bn9o Жыл бұрын

    • @@user-gd4gs6bn9o I wear one was plug and typically turn that ear that way. Also mainly use a little like 2 gallon rarely break out the 5

      @keeganholt281@keeganholt281 Жыл бұрын

  • I had the same problem at first when I put new tyres on my motorcycle. The combustion was great, but the effect was nought. I finally figured you have to aim the spray through the gap between the rim and the tyre. The spray has to be inside the tyre not on its outside flanks. It worked a treat after that. Hint: if you take the valve out beforehand you don't need to attach the tyre to a compressor. You can actually hear the air being sucked in after a successful combustion.

    @mikethespike7579@mikethespike75792 жыл бұрын

    • Cuul

      @jacobpugpoirier3350@jacobpugpoirier33502 жыл бұрын

    • Explosion must be inside the tyre but burning the tyre is not a solution

      @bstechmedia298@bstechmedia2982 жыл бұрын

    • Sweet! Thanks for the issue. I've been having the same problem with my bike. I'll put this to the test tomorrow!

      @whatsittoya900@whatsittoya9002 жыл бұрын

    • Good idea to take the valve off 👍

      @greglarson4253@greglarson42532 жыл бұрын

    • What spray he using to spray the tire's

      @agenius8488@agenius84884 күн бұрын

  • I love the sound it makes when the tyre blasts into position!

    @pi6706@pi6706 Жыл бұрын

  • I did a set of tires over the weekend. This is how I always seat the beads. I had a partial can of Pyroil starting fluid. I used it on the first 3 tires and it worked 1st time on each. The can was empty for the 4th tire so I used Supertech starting fluid. A can and a half later and many attempts I finally got it. It seemed like it didn't have the super fast flash burn of the pyroil.

    @shaneandlauriebrown6266@shaneandlauriebrown6266 Жыл бұрын

  • I have a friend who has tried to talk me into mounting tires this way more than once. I'm perfectly happy doing it slowly and safely.

    @allenhanford@allenhanford3 жыл бұрын

    • I have been putting tires on rims for 50 years by hand and only tried this once, and then I couldn't get it to work. Majority of the time I use a hand tire pump to get them seated and inflated. In my book this is the ' wuss ' way.

      @michaelszczys8316@michaelszczys83162 жыл бұрын

    • 🐈pssy...🤣🤣🤣

      @62cripple@62cripple2 жыл бұрын

    • Yeah, safely..........that's why I have someone else do it!

      @mackydog99@mackydog99 Жыл бұрын

    • Tractor tires, especially lawn tractors, tires are delivered deformed and often require a tube even though they are designed to be tubeless. This is a great way to get them done vs paying $20-30 tire at a shop. Which is almost the cost of a tire. Not to mention anyone who's tried to replace a tire in the winter knows its neigh on impossible if the tire isn't in perfect round. When you need a tire on NOW, and not a day or two later, this is worth considering as long as you're not the average dummy.

      @boots7859@boots7859 Жыл бұрын

  • Once you failed the first attempt with the second tire, you needed to flush the smoke out of it with a blow gun since the air from the valve stem wasn't even getting into the tire. You have to have some fresh air inside with the ether for it to burn. Smoke won't work.

    @lewis2553@lewis25532 жыл бұрын

    • I never do it this way but often times I have wondered about the gases left in the tire

      @michaelszczys8316@michaelszczys83162 жыл бұрын

    • @@michaelszczys8316 once the bead has seated and finished being inflated with air you can let it out if you want, then pump it it back up.

      @jeremybreeden4228@jeremybreeden42282 жыл бұрын

    • @@jeremybreeden4228 I certainly hope they do. They fill tires with nitrogen these days to cut back on oxidization but the fumes from the explosion would probably ADD to it.

      @michaelszczys8316@michaelszczys83162 жыл бұрын

    • 0

      @racoriewilliams5951@racoriewilliams59512 жыл бұрын

  • If you put a ratchet strap around the tire and tighten it, the bead will come close to the rim. Always remove the valve core and do not hook up a hose to the rim. Sometimes you can use an air nozzle to force the tire onto the bead if it has contact with the rim. You were spraying way too much ether in the tire. A one second burst is enough, any more than that an the results might not be what you expected.

    @hillbilly4christ638@hillbilly4christ6382 жыл бұрын

    • You missed the part where he succeeded.

      @kurtiscal3msetccdwell618@kurtiscal3msetccdwell6185 ай бұрын

  • I DON'T KNOW IF IT HAS BEEN MENTION'D ANYWHERE IN THESE COMMENT ON THIS VIDEO BUT I WILL SAY IT . WHAT HE IS DOING CAN BE VERYYY DANGEROUS IF YOU DON'T KNOW WHAT YOU ARE DOING DONT DO IT ..... AND SHOULD NOT BE DONE THE WAY YOU SEE HERE... . BUT IF YOU INSIST ON DOING IT MAKE SURE YOU USE A BUCKET ON THE UNDERSIDE OF THE RIM..... NEVERRR PUT THE WHEEL ON A FLAT SUFFACE..... IT CAN OR WILL POP UP AND HIT YOU IN THE FACE OR HEAD RESULTING IN MAJOR INJURY OR EVEN DEATH . ALWAYS MAKE SURE AND USE A BUCKET UNDERNEATH . SET THE WHEEL'S RIM ON TOP OF THE BUCKET SO THE WHEEL IS NOT TOUCHING THE GROUND . ALSO MAKE SURE SOMEONE IS THERE WITH YOU . MY ADVICE WITHOUT A PROPER... SAFETY CAGE AND TIRE CHAIN REISTRAINT I WOULD NOT DO IT . I JUST WANT TO KEEP YOU ALL SAFE . I DID THIS TYPE OF WORK ON BIG TRUCK TIRES FOR YEARS AND SEEN SOME THINGS YOU WOULD NOT BELIEVE BE CAREFUL .

    @marc7875@marc78754 жыл бұрын

    • 😇😇😨😇😇😇😇😇😇😇

      @anaclaudiaalvesdesouzasant7451@anaclaudiaalvesdesouzasant74513 жыл бұрын

    • Watch my video to see it done safely.

      @wolfmantroy6601@wolfmantroy66013 жыл бұрын

    • Very well spoken. Tires can.....take your head clean off. I've done tractor trailer tires for years,split rim(windo maker) ain't no joke to play around with death

      @thomasconway499@thomasconway4993 жыл бұрын

    • Appreciate your insight, gonna replace my tire stem with a buddy and we’ve both done much harder tasks however I’d say this might be worth bringing into discount tire really quick if you don’t wanna risk it

      @CorruptInfinityOfficial@CorruptInfinityOfficial3 жыл бұрын

    • @@thomasconway499 Yup, we have those split rims on certain models of aircraft some with tubes and some tubeless. I always kept the stories I heard about split rims in my mind when I would have to take them apart, that said I never had a issue. I really wonder how dangerous could it really be, let’s say someone f**ked up and started to take apart one fully pressurized, wouldn’t the rim pop the seal before all the bolts were all the way out? It would certainly make you deaf and need clean underwear but I don’t imagine someone would get all the hardware out before the air/nitrogen escaped, no? If they did somehow some way.... ouch! Lots of red paste to clean!

      @mfslyphantom8811@mfslyphantom88113 жыл бұрын

  • I think that it's very important to get the fluid inside the tire like with the straw that comes with bolt loosening cans ect.

    @twagner6155@twagner61553 жыл бұрын

    • No not really u can kick the tire and it'll do the same thing

      @aomelodioushawk902@aomelodioushawk9022 жыл бұрын

    • @@aomelodioushawk902 ok

      @twagner6155@twagner61552 жыл бұрын

    • Yes it is iportant to get the fluid inside the tire. If it is outside and blows, it's the universe which expands.

      @noksplukk@noksplukk2 жыл бұрын

    • @@noksplukk I agree

      @twagner6155@twagner61552 жыл бұрын

  • You should have left the valve core out, and the air hose off. The 2nd tire needed to have both beads close to the rim edge to seat with the fire. After bead pops on, and fumes are out of tire, install valve core and inflate.

    @geofjones9@geofjones92 жыл бұрын

  • This method really is done for damaged rims, otherwise stand the tire up while putting air then bouncing it up and down a few times to set the bead

    @transformer889@transformer8893 жыл бұрын

    • Not really , those are new tyres on new rims . He is stretching a narrow tyre onto a wider rim so normal bead seating is difficult .

      @jvalentine8376@jvalentine83763 жыл бұрын

    • Yeah I had a spare tire do this to me. I ended up having to spray starter fluid in it and light it on fire with a cigarette lighter. Jesus did I spray too much. It exploded and my ears were ringing. But at least I was able to get back home safely in the morning.

      @TheNuclearBolton@TheNuclearBolton2 жыл бұрын

    • You can still do them without explosives. You might need air compressor for those but you get one side pushed on as good as you can with your foot stepping on it then stand it up carefully , apply air and gently push the rim to get other side of tire to contact rim without it coming off the side you got bead stuck on. It may take a few tries. Helps if you have another person to apply air.

      @michaelszczys8316@michaelszczys83162 жыл бұрын

    • A ratchet strap around the tire works too....

      @carolrobinson7779@carolrobinson77792 жыл бұрын

    • @@TheNuclearBolton Yeah but: "WHAT? CAN'T HEAR YOU!!!MY FRUCKEN EARS RINGIN' SO BAD!!!"

      @muchgreatness7497@muchgreatness74975 ай бұрын

  • 2:17 ! Hahaha the noise coming from him so priceless 🤣

    @astronaut_69@astronaut_69 Жыл бұрын

  • Get it done properly as someone mentioned in comment below he sadly lost his mate

    @darkshaman7087@darkshaman70873 жыл бұрын

  • you have to get the Starter Fluid inside the tire and set tire so gap is smaller.... And make sure the fire is out before respraying starter fluid... burnt my eyebrows off a few times as a kid doing Dads big truck tires ;)

    @kelvenguard@kelvenguard3 жыл бұрын

    • Just burnt my brows n lashes off a couple days doin this 😂

      @chevychooch@chevychooch2 жыл бұрын

    • @@chevychooch Right On :) welcome to the club..... next step is Losing your eye brows to gas on a camp fire... Lighting Propane or natural gas burners... Playing with Black Powder.... All's fun just Drop N Roll

      @kelvenguard@kelvenguard2 жыл бұрын

    • You can get them screwed, glued or tatooed back on. You could also pencil them back in. Do it right though, otherwise people will comment on your demeanor.

      @muchgreatness7497@muchgreatness74975 ай бұрын

    • @@muchgreatness7497 lol............. Just use a Sharpie like the Calvin and Hobbs comic

      @kelvenguard@kelvenguard5 ай бұрын

  • This is by far the safest method for mounting a tire on a rim! One tip, try to be as close to the tire as possible at all times for best results.

    @onlyonecannoli3952@onlyonecannoli39522 жыл бұрын

    • I don’t know about safest but it’s one way to do it but a bead blaster will do the same but with no fire needed.

      @johnwest6977@johnwest69772 жыл бұрын

    • 😂😂

      @rahulparihar886@rahulparihar8862 жыл бұрын

    • You forgot to remind people to keep their fingers in between the bead and the rim to ensure it has seated fully. Gotta be safe ya know...

      @dc6233@dc6233 Жыл бұрын

    • Lol you guys are crazy

      @xlilnetx@xlilnetx Жыл бұрын

  • Big Smoke: "All you had to do was get us on that damn train Carl"!

    @imhoteptheunsullied3000@imhoteptheunsullied30002 жыл бұрын

  • Good way to pre-cook dem roadworthy tyres!

    @methree3821@methree38212 жыл бұрын

  • Thanks for the failed attempt tries too. I learned how to better do it from your mistakes. And mine. Getting the fluid IN the tire is key IMO.

    @teel6060@teel6060 Жыл бұрын

  • Support the wheel with a block so the tire drops down on the inner bead. That will direct the explosion upward. Until the o2 is depleted. Lying a wheel on a flat surface is unsafe.

    @charlemagne1162@charlemagne11624 жыл бұрын

  • I always did it with the air chuck on while lighting, seemed to spread it around better. This was always on tractor trailer tires too

    @johnkopek7979@johnkopek79792 жыл бұрын

  • It looked like the gap was too big, so the gas was escaping too easily.

    @eddierodden@eddierodden3 жыл бұрын

    • Yes looks like those are really wide rims for the tire width

      @williamdavidson9009@williamdavidson90093 жыл бұрын

    • Not really! It took him 4 tries to figure that he needs to spray inside(!) the tire. ...tbh, I don't think he figured it out, he just got lucky without understandingthe concept. Or why would he try it so many times the exact same way but expecting a different result.

      @alphadawg81@alphadawg81 Жыл бұрын

    • He just wasn't putting it in the correct place

      @dc6233@dc6233 Жыл бұрын

    • I was holding to my seat waiting for the explosion 😂🤣

      @dakmycat3688@dakmycat3688 Жыл бұрын

  • Awesome! Not only does this work it is also fun as hell! :)

    @joedon1706@joedon17063 жыл бұрын

    • Deja lo divertido es peligroso no sabes como explotara yo me dedico a reparar llantas y e visto muchas veces a colegas fallar y tener accidentes solo tener precaución saludos

      @hectorcorteslopez4455@hectorcorteslopez44552 жыл бұрын

  • In that case use a strap around the tire.

    @christiaanajcronje@christiaanajcronje3 жыл бұрын

  • What kind of spay could be used here? Could you used the Long-neck butane lighter here?

    @forexsanjose6090@forexsanjose60902 жыл бұрын

  • For Gods sake man..... pull the tire up on the rim !

    @wolfmantroy6601@wolfmantroy66013 жыл бұрын

    • Fr dude stupid sob 😭

      @jethroscooter7214@jethroscooter7214 Жыл бұрын

    • That usually works fine if necessary but nobody bothered to explain to this fool that you spray the ether INSIDE THE TIRE not on the side wall

      @larryhullinger4141@larryhullinger4141 Жыл бұрын

  • I have done probably well over 1000. When the tire is so far away from that outer bead it cannot contain the fire. Set some blocks underneath to split the difference in gap. Then anytime it does not go you must air out inside of the tire of all the burnt gasses. Watch your video you spray way too much onto the sidewall of the tire also. I only spray about halfway around completely within the rim . I like your way of lighting.

    @howardkeil1526@howardkeil15264 ай бұрын

  • ive been having trouble with almost seated tires. ive lost two can straws in the tire. i think i spray too much and there’s not enough air to let it explode. i push on the tire to get my straw in and do a few sprays around it. it ignites, but won’t explode. works like a charm when it does though. maybe ill stand on it or something. i was using mass air flow sensor spray and brake cleaner.

    @johnmarkhatfield@johnmarkhatfield Жыл бұрын

    • I wouldn’t stand on it, if it’s exploded while u r on top of it it will have enough force to hurt u and lift I off the ground, people have been killed when the whole wheel pops off the ground and hit them in the face and nose. Iv never tried this method but Iv seen people say when they have trouble like u do kick the side wall I slightly or hit it with a small hammer to force into it through the gaps to feed it the air I talking about. But if u do use the hammer watch out it will smack it back at u if the bead sets fast sending it to u

      @xlilnetx@xlilnetx Жыл бұрын

  • Second tire burned up oxygen is why wouldn't seat after first try. If first try unsuccessful, press tire with your foot all the way around and release, then try again.

    @doncallicott1696@doncallicott16964 жыл бұрын

    • Eeeh... wrong!! The guy is obviously sharper than you are lol. Did you not see him hook up the compressor hose? Are you deaf and missed the compressor running too? He was pumping air straight into the tire without the valve core at least half the video lol. You thought you were clever and figured out the issue only to find out you're really the school dunce 😂😂 I bet you feel real clever now huh lol? Dont get butthurt though k. It was just a rush to judgement on your part... happens to the best of us.

      @andrewlightbody4221@andrewlightbody42213 жыл бұрын

    • @@andrewlightbody4221 that’s really sad you wrote that man

      @jackw7620@jackw76203 жыл бұрын

    • @@jackw7620 and here is an example of the school bull

      @Thedar561@Thedar5613 жыл бұрын

  • Use to do that all the time. Be ready and if it just burns kick the tire the surge of air will make it explode. The tire bead is below the stem not circulating the air to combust. Worked for me, we cannot do that anymore against company policy!

    @patdexter9188@patdexter91883 жыл бұрын

    • No more fun allowed! 😅

      @muchgreatness7497@muchgreatness74975 ай бұрын

  • Stand the tire up and push down on it while blasting with air. It works on my motorcycle tires with a small husky compressor.

    @glennknauer2696@glennknauer2696 Жыл бұрын

  • Thanks for sharing this video. It works great without the air and I removed valve and sprayed inside tire and put torch tip inside tire to ignite it. Kaboom !

    @randyrobison335@randyrobison3352 жыл бұрын

  • Put the air on first before igniting it. Then after the tire has sufficient air in it let some back out then fill to appropriate level. I've had truck tires explode and do some serious damage by not doing that procedure.

    @awarriorscall1@awarriorscall14 жыл бұрын

  • Great technique, thanks for sharing!

    @Journeyman-Fixit@Journeyman-Fixit4 жыл бұрын

    • Journeymanc

      @vanhans503@vanhans5034 жыл бұрын

  • amazing,thankz for idea 👍👍👍

    @CakMadHudiLamongan@CakMadHudiLamongan3 жыл бұрын

  • Leave the air hose connected and flowing. Spray the fluid INSIDE the tire near the valve.

    @rbhe357@rbhe357 Жыл бұрын

  • Many times you can just put a heavy duty car ratchet strap around the tire and after a couple of clicks it will bow the bead out to make enough contact with the rim that you can just use air (no starting fluid) to initially get it to take. Just make sure that as soon as the air stops leaking between the rim and tire that you stop and then loosen the strap. This way it doesn't break and get ya. Then you can continue to fill and if you wd-40 the bead on the tire and rim then usually by the time you hit 40 psi or so it will pop on in my experience. I have used the starter fluid trick before but its definitely a bit dangerous. Especially if you have to hit it with a sledge to pop and the explosion transfers some energy back into the sledge.

    @spyder000069@spyder0000693 жыл бұрын

    • well thank you Sir, very much, I found your constructive input to be most positive.

      @PCFLQTLF@PCFLQTLF3 жыл бұрын

  • You are MAD... lot easier and safer ways that i can think of, and whats been said bellow :)

    @matthewcadle7200@matthewcadle72002 жыл бұрын

  • De haber levantado un poco el hombro del neumático desde el suelo , hubieso ayudado a acercar más la pestaña del neumático a la llanta!!..y así se evitaría recalentar innecesariamente 4 veces el caucho....mi opinión desde la ventana de la humildad y el respeto! Saludos desde Lican Ray novena región de Chile

    @comparitofeulake920@comparitofeulake9203 жыл бұрын

    • hola tenes idea que es el aerosol con el que rocea el interior de la llanta? hoy quisieron en la gomeria poner unas 205 65 15 dentro de una llanta 15x10 y no pudieron...tenes idea si se puede?

      @omabar7857@omabar78572 жыл бұрын

  • Yeah I been doing that trick for years on my endump trailer only when it’s emergency and it blew up in my face because I usually light it with a lighter kind of being in a hurry and careless you can say and lost 50% of my facial hair. It can be dangerous..!

    @diegogomez8600@diegogomez86002 жыл бұрын

    • You can FIX flats , BUT you CAN'T fix stupid !

      @sandybarbee8401@sandybarbee8401 Жыл бұрын

    • When your on the job site you don’t have time to call someone to do it for you..! You have to do what you have to do to keep that money rolling in biatch..!

      @diegogomez8600@diegogomez8600 Жыл бұрын

  • Very good ...tutorial 👍👍👍

    @azkhatambalbanchanel2763@azkhatambalbanchanel27632 жыл бұрын

  • Gas or brake cleaner works better. Also if you actually get it inside the tire to conceal your explosion

    @jacobdoucet3335@jacobdoucet33353 жыл бұрын

  • What about putting the either inside the damn tire instead of spraying it all over the side wall

    @claymcmullen4458@claymcmullen44584 жыл бұрын

    • Ikr

      @waylen4098@waylen40983 жыл бұрын

    • Rookie mistake trying to be KZhead cool, literally melted the tire

      @carolrobinson7779@carolrobinson77792 жыл бұрын

  • Is it safety to drive it with this method too strached the tire

    @toddyzilla6066@toddyzilla60663 жыл бұрын

  • Get a ratchet strap to squeeze the tire, it will save your eye brows and maybe your life.

    @barryjanis@barryjanis3 жыл бұрын

    • that's what i do. thought I invented it. Used it today for four wheeler tires

      @timothylongmore7325@timothylongmore73253 жыл бұрын

    • @@timothylongmore7325 Timothy its an old tyre fitters trick.

      @roberttill3787@roberttill37872 жыл бұрын

  • Can of starting fluid and a BBQ Grill lighter... Do not ever ever do this on a truck tire with a snap ring the snap ring will leave that dump truck rim at about 100 miles per hour... My friend died that way, the snap ring hit him in the head and lodged itself into the 14ft ceiling

    @bullmoosecalhoun@bullmoosecalhoun4 жыл бұрын

    • R.I.P

      @Houtarou_Hyouka_Unforgiven@Houtarou_Hyouka_Unforgiven4 жыл бұрын

    • Thank you for th tip ad sorry for your lost

      @LemonJuiceGV@LemonJuiceGV4 жыл бұрын

    • Split rim tires are known for that!

      @icelineman@icelineman4 жыл бұрын

    • Rip :(

      @realkilju@realkilju3 жыл бұрын

    • @@icelineman yea; splits are whole different ball game; most places require a cage now.

      @Aerogrow@Aerogrow3 жыл бұрын

  • What was the accelerant that you were using? Is it Starter fluid? or something else?

    @EarlGray_kd7sjt@EarlGray_kd7sjt2 жыл бұрын

    • Bradex easy start..

      @bigmuller1@bigmuller1 Жыл бұрын

  • Nice idea and pious work

    @nabildalaali8826@nabildalaali88264 жыл бұрын

  • Title should be "Tire expansion bead seating". Should have sprayed INSIDE the tire. Flames means you did it wrong.

    @david_1956@david_19563 жыл бұрын

  • What thread on air fitting are you using?

    @ryanbassett2091@ryanbassett20913 жыл бұрын

  • what sprais use?

    @socrawheels8953@socrawheels89534 жыл бұрын

    • Started fluid

      @mcq31mc@mcq31mc2 жыл бұрын

    • STARTER FLUID

      @mcq31mc@mcq31mc2 жыл бұрын

  • Very nice!! thank you very much my friend!!!

    @IoannisDiakopoulos@IoannisDiakopoulos4 жыл бұрын

  • You must get the propellant into the tire ....This shows how much was sprayed onto the outside of the tire ...

    @roncaptain9527@roncaptain95274 ай бұрын

  • Well I was expecting a tyre to blow up. Lmao 😅

    @annly666@annly6662 жыл бұрын

  • May I ask why applied this method of fire ....reduces slippages.... REDUCES flaps...????

    @observation2384@observation23842 жыл бұрын

    • narrower tire onto a wider rim, many refer to this as tire stretching

      @PCFLQTLF@PCFLQTLF2 жыл бұрын

  • Is this good for you tire?

    @ashtonreed4907@ashtonreed49073 жыл бұрын

    • Yes

      @paklekj4429@paklekj44292 жыл бұрын

    • Why Certainly! Melting the rubber is perfectly fine! 😂

      @carolrobinson7779@carolrobinson77792 жыл бұрын

  • Didn't spray INSIDE the tire cavity. Use the red straw that comes with the can to spray inside.

    @vanstechcorral@vanstechcorral2 жыл бұрын

  • Now you can dump the second tyres in some scrapyard.

    @splatharackal1337@splatharackal13374 жыл бұрын

    • not as hot as you think, still using it...

      @PCFLQTLF@PCFLQTLF4 жыл бұрын

    • Russian Lifestyle 😁

      @steak4youlp782@steak4youlp7824 жыл бұрын

  • Maybe if he didn't waste half the can spraying on the sidewall and more inside also what's with those little spurts

    @s.o.f.fpatriotsforlife414@s.o.f.fpatriotsforlife4144 жыл бұрын

    • Premature sidewall failure...

      @carolrobinson7779@carolrobinson77792 жыл бұрын

  • If you’ll kick it or hit the tread with a hammer if it don’t blow on the bead with the light the extra force while it’s burning will usually be enough to pop it up in bead

    @brynredmon7869@brynredmon78694 жыл бұрын

  • What are you use for the fire?

    @hope1427@hope14273 жыл бұрын

    • Brake cleaner.

      @a.m.7060@a.m.70603 жыл бұрын

  • You need the fuel inside not the sidewall !

    @mcbain3949@mcbain39494 жыл бұрын

  • No tire was harmed in the making of this video

    @desertfox4921@desertfox49213 жыл бұрын

  • your definition of explosion is different than mine

    @caddi70@caddi70 Жыл бұрын

  • Is it really that hard to just let the air pop em on there correctly?

    @snodgresswilim4817@snodgresswilim48173 жыл бұрын

    • No u cant do that there is beads in it

      @marcotjiu6340@marcotjiu63403 жыл бұрын

    • look at the gap from tire to rim... if you can close that gap somehow then using air is no problem.. this method using combustion to seat the bead is way more common than you would think..

      @codyramos3200@codyramos32003 жыл бұрын

  • That was so cool 😂😂😂

    @sidehop@sidehop Жыл бұрын

  • PERFECT WOW!

    @xopx9467@xopx94672 жыл бұрын

  • That many times?

    @GarrisonsMadHouse@GarrisonsMadHouse11 ай бұрын

  • can this be done With a alcohol

    @MEMBR1LLO@MEMBR1LLO Жыл бұрын

  • I do this all day long at work with truck & tractor tires

    @franmitch3589@franmitch35893 жыл бұрын

    • what is this spray ?

      @eizot68@eizot683 жыл бұрын

    • @@eizot68 starting fluid. Just dont spray too much. Start with the smallest amounts. It is VERY DANGEROUS.

      @tylerkempfer750@tylerkempfer7503 жыл бұрын

    • @@tylerkempfer750 thank you bro !

      @eizot68@eizot683 жыл бұрын

  • 😂😂😂😂😂ala segunda llanta le valió madres hasta q quiso

    @CarlosGarcia-cj3tw@CarlosGarcia-cj3tw4 жыл бұрын

    • Pensé q se iba a quemar y nunca se iba a inflar 😂😂😂😂😂😂

      @alfredovillegas5991@alfredovillegas59913 жыл бұрын

  • Способ действенный. Но для того чтобы он работал бензин нужно залить в балкон, а не на балкон.

    @user-vw5mv1ou1t@user-vw5mv1ou1t2 жыл бұрын

  • The biggest problem I have is not putting enough gas or starting fluid in the first time or two.

    @davidshumski4629@davidshumski4629 Жыл бұрын

  • Las llantas estan mojadas y debe ser un clama frio por eso la llanta implosiona en cuanto explota y se apaga el fuego

    @juanmanuelacosta4659@juanmanuelacosta46598 ай бұрын

  • So he kept spraying the stuff on the outside. You need a space to spray the fluid in.

    @scottbain1383@scottbain13834 ай бұрын

  • I never pay to mount and balance my tire. I legit do this 1 to 2 times ever month or 2. Burn up alot of off road tires and atv tires.

    @Akhazmat907@Akhazmat9073 жыл бұрын

    • Do you have to balance your tires if your mainly going off roading with them?

      @vince2997@vince29972 жыл бұрын

  • Старый " Дальнобойный" способ посадки резины на диск , когда "безкамерки " Появились а шиномонтаж для грузовых еще нет))

    @Vitbib@Vitbib4 жыл бұрын

    • Pesca

      @mariadelosreyessalazardele374@mariadelosreyessalazardele3744 жыл бұрын

  • I use 1/4 cup gasoline on my hd fatboy tires its enough to seat the bead doesn't cause a vacuume because not enough fuel to keep burning the oxygen in the tire This is the easiest way without buying equipment I first seen it done on a monster truck tire they had to use a lot of fuel

    @TheMetalmachine467@TheMetalmachine467 Жыл бұрын

  • That tire’s gonna be charcoal by the time you get it seated.

    @tomtom1484@tomtom14844 жыл бұрын

  • A safer solution (because I just did it) is put on the new tire. Get a bicycle tube that will fit inside the rim. Fill bike tube with air. It seals the space. Slowly add air to vehicle tire, and remove air from bike tire Worked flawlessly on all four for me

    @bostontrip1@bostontrip16 ай бұрын

  • Obviously his 1st attempt at this

    @kennyd2134@kennyd2134 Жыл бұрын

  • Is this guy kinda not doing it right because it didn't look "normal" to me? Or is this spot on??

    @swpo1@swpo1 Жыл бұрын

  • On the 2nd tire, he had the air compressor in reverse and was sucking the air out for a second!

    @pentiuman@pentiuman3 жыл бұрын

    • the fire inside was using up the air. you just made me think of the term "backdraft" lol

      @PCFLQTLF@PCFLQTLF3 жыл бұрын

    • @@PCFLQTLF - Yeah. What he's doing seems dangerous. I just ordered a tire bead sealer product called "Xtra Seal", to try on difficult tires, like my lawnmowers. www.walmart.com/ip/31-Incorporated-14-101-32-oz-Flammable-Bead-Sealer/34042389?comm-msg-vehicle=EMAIL&comm-msg-id=0980b570-955f-40a9-b4cf-344a78e00a5a

      @pentiuman@pentiuman3 жыл бұрын

    • Lol. good one.

      @joedon1706@joedon17063 жыл бұрын

    • I hope you were joking, that is just the oxygen being sucked out after the explosion.

      @dc6233@dc6233 Жыл бұрын

  • Looks dangerous

    @screwsnutsandbolts@screwsnutsandbolts4 жыл бұрын

  • I didn't see a tire explode

    @Bryan-wq9vq@Bryan-wq9vq4 жыл бұрын

    • Anonymous فثبت

      @adnaniraq1307@adnaniraq13074 жыл бұрын

    • Fooling people eh

      @jaydonsalick8019@jaydonsalick80194 жыл бұрын

    • it did 0:08

      @yl3364@yl33644 жыл бұрын

    • At least it’s no surprise with KZhead it’s all fake thumbnails and false titles

      @billisbobagis1687@billisbobagis16873 жыл бұрын

  • You have to spray it inside the tire...not on the sidewall!

    @jamesgarrett6848@jamesgarrett6848 Жыл бұрын

  • New meaning of "burning rubber".

    @johnsdsl@johnsdsl Жыл бұрын

  • how easy it is to use an 8" pipe to fill the hole

    @setona1@setona1 Жыл бұрын

  • Using fire 🔥 will void any tire warranty, you have to use an air tank

    @mrgoodguy7194@mrgoodguy71942 жыл бұрын

  • Instead of this extremely dangerous method.....and you are using about 10 times the amount of starting fluid at that, try putting a ratchet strap around the diameter of the tire and crank it down. That will bring the bead right up to the rim, so you need no explosion at all, just air pressure. If you can't get the bead close enough and need the explosion, use a tiny bit of starter fluid, in the gap.

    @skeet25s@skeet25s6 ай бұрын

  • kinda lit

    @testinyin@testinyin2 жыл бұрын

  • Yeah, uh, don't spray the ether ON the tire bead, especially several times. You burn a puddle of ether on a bead several times like this and - bead failure and boom.

    @davidk7544@davidk75442 жыл бұрын

  • Much better tire bead bazooka

    @BrianBernasor@BrianBernasor Жыл бұрын

  • This was OK when tires had 3-4 sidewall plies now it's 2 in most. Too much ether can damage them and cause failure. I've used ether in the past but not on today's rubber bands they call tires.

    @carolrobinson7779@carolrobinson77792 жыл бұрын

  • If you can get the tire on the rim by yourself.. just put it in the car and take it to a damn local tire shop. They will probably do that shit for free the safe way and it takes them 2 seconds.

    @DyLemmaOG@DyLemmaOG8 ай бұрын

  • Tires that actually fit the rims would have been much better. Those tires are obviously made for a rim half that width

    @1bmwrider@1bmwrider2 жыл бұрын

  • I tried this and my tire completely exploded. It was an explosion. I'm pretty sure it's possible for the fire to get sucked back into the air compressor...

    @nathantremblay5662@nathantremblay5662 Жыл бұрын

  • They do make a cheetah tool for this, but I assume this is for entertainment purposes.

    @28hotrods@28hotrods2 жыл бұрын

  • Spray in there deeper got to be close fuel inside not outside

    @repeatagain1789@repeatagain17892 жыл бұрын

  • Wasted half the can spraying the the sidewall of the tire instead of inside where it counts.

    @s.o.f.fpatriotsforlife414@s.o.f.fpatriotsforlife4144 жыл бұрын

    • was getting the feel while being cautious

      @PCFLQTLF@PCFLQTLF4 жыл бұрын

    • @@PCFLQTLF shame on you ...wasted my time

      @user-kn1tk6eb3x@user-kn1tk6eb3x4 жыл бұрын

    • eksh

      @zoheirzarzban6913@zoheirzarzban69134 жыл бұрын

    • O kare

      @florencpoti4664@florencpoti46644 жыл бұрын

  • Has anyone address the fact that the tires still need balance

    @printblaster6555@printblaster65552 жыл бұрын

    • I haven't heard a single word in the comments yet. Your comment is #1 because it is what logical people know and think. Some meaning alot sadly didn't get it or never got it at all. I do commend all those souls out there still making an attempt to get it! Cheers.

      @swpo1@swpo1 Жыл бұрын
KZhead