The long wait is finally over and we are revisiting tires vs. 300 bar air compressor series! This time we deliver the long waited semi truck tire! We have built realistic tire shop around the incident site to capture all the terrifying effects that the tire will unleash to it's surrounding area. DON'T TRY THIS AT HOME! YOU WILL DIE IF YOU TRY TO DO THIS!
Merch www.bunkerbranding.com/pages/...
If anybody wants to see bigger tires done and has some laying around we are up for the challenge :D Next time probably with bottled nitrogen to save some time. I don't want to wait 8 hours on the bunker to tires to explode :D
Try a Boeing 747 tire to explode
you need to glue the tires to the rim so you don't have pressure failure and have actual rubber failure
But you should modify the rim to prewent tire from slipping from it. Then it will be big explosion :)
You guys should put these tires into of a van of some sort and pump them up! Or a car. Those Michelin truck tires are made well!
to shorten the wait you could separate the filling in two stages using different compressors for each, first stage with a compressor that does high volume/low pressure, and only then moving to a low volume/high pressure compressor
This episode brings back bad memories of my first year as a mechanic. I was mounting large truck tires and nobody told me any of the safety rules, so after having mounted a few, using bars no machine, I was tired and was sitting on a tire while filling it. I didn't know that the rim was slightly warped, so it detonated at just over 100psi, sending me (250lbs) up about 4 feet and over 8 feet. The tire hit the shop wall about 30 feet away. I walked away from that with sand blasted eye balls and some bruising, I consider myself very fortunate.
Saw a tire wall failure rip the shirt clean off a mans back. 😂
Vat da fack. Holy shit dude, you're lucky to be alive.
I saw a truck tire explode in a cage.. even in a cage it completely bent up the cage bars.. though the cage did stay together and did stay anchroed to the floor... the blast was so strong just the blast wave broke the window from the office / waiting area of the shop.. it was a standard 11R22.5 tire.. a brand new one.. that particular tech was the only one who used the cages for single piece rims... after that occured the rules were everyone use a cage no matter what tire they were filling.. the consensus was that the exploding tire was defective... they were going up to 115 PSI with it.. the pressure was somewhere between 100 and 115.. the yhad just checled it and it showed 100 then they started ot inflater and boom.. sidewall failure
Very fortunate similar experience with me at a trucking company I had turned to get a drink of water and it sent the rim where I was standing 2 seconds earlier
@@Helo735 Had I been sitting absolutely anywhere else on the tire it would have hit me instead of throwing me. The warped part of the rim was directly under my butt, pointed at the floor.
The girly calendars on the shop wall truly create an authentic set production. Nice work.
No respectable garage would be caught without girly calendars.
What company produced the calenders.....I collect them have over 2000 in my shop
Speaking of girls, what happened to the original female host?
I've always found this to be really weird. What? You're supposed to be getting horny around a bunch of other dudes? Pretty weird.
@@bertiewooster3326Creep
That rug really ties the room together
You think the carpet pissers did this?
Really ties the boom together.
He peed on my fkn rug :D
Just don let a nihilist piss on it when he shows up at the wrong house.
Yeah? Well, you know, that's just like uh, your opinion, man.
I inflate 22.5" tires at work, I put it in a safety cage, use air regulated to 125 psi, and I walk away and work on things on the other side of the shop for about 15 minutes. This here is a great demonstration of why I do it this way.
I love how you perfectly captured the look of literally every tire shope ive ever seen
So true!! 🇨🇦 🍁
Excellent job, down to the sexy calendars!
Dirt floor and all!
It's an internatinal standard for tyre shops including half drunk mugs of coffee with dirty handles
In 1971 my father was working in a tire shop on a set of split rim truck tires when on of them blue apart. He had not secured the locking ring properly. It tore 3 fingers off of hie left hand and broke 7 ribs. Two had multiple fractures. He also had severe bruising on the entire front of his body and lost the earlobe on his left ear. Somehow his hearing recovered and his eyes were not damaged. He was told by the insurance people he was one of the lucky 1 in ten that actually survive that kind of accident. Most people are bending over the tire assembly when they blow. He had stood up and was turning to walk away when all hell cut loose. Thanks for demonstrating the incredible raw power released when these things go wrong.
Those split truck rims are no joke, yer da' is a lucky, lucky man
Sposed to put them in a tyre cage before inflation
Widow makers.
*blew apart, blue is a colour.
@@johngibson3837 That's what you do now. This guy's father was doing it in 1971. Your comment is irrelevant.
Rest in pieces tire guy, you were the best, and I realise the pressure finally got to you.
Tire Guy re-tired (very grim). Cheers!
I got blown up by a rear backhoe tire when i was 19. My 2nd or 3rd near death experience. I didn't know my boss beaded the tire with ether so i was basically adding oxygen to a bomb. I can't explain how i survived. I never heard a bang or felt anything. I was instantly in an oil change pit, somehow completely unharmed. Watching this made all of the hairs on my body stand up and made it even harder to understand the outcome. It removed the roof on the shop and took the drop ceiling down in the office across the street, but somehow i was perfectly fine. I can't explain it. I'm grateful to be able to tell this story. I swear on my life it is a true story. Watching this just adds to my confusion.
Considering the circumstances, I would speculate you were placed in the oil pit by an unseen force moments before the explosion, thus explaining your miraculous survival. I have read other firsthand accounts where people are inexplicably plucked from disaster moments before certain death but cannot explain how it happened. The idea is interdimensional beings intervening on your behalf.😮
Give thanks and know that He is watching over you hoping that you use your second chance to find Him.
You survived because you were able to move. That’s why the building didn’t.
@@vanmonroe4346 Jesus/ Guardian Angels, Mother Mary, who knows?, maybe all?.
It's really crazy. I read some case studies on victims of tyre blowout. Average death rate of 19%. A force equivalent to the detonation of a landmine minus thermal and chemical effects.
What you should do is do this while the tires are on a vehicle and see what it does to the car/truck.
How about inside a car?
I was driving on a motorway (M6, UK) a few years back when the rear tyre of a tipper truck blew. The car the truck was overtaking suffered a broken side window (and maybe some small cosmetic damage) because the boom dislodged all the dried on clay that was lining the wheelarch. The noise, despite having windows closed and being abot 20m back from the truck, was amazingly loud. Obviously a rigid tipper is a fairly solidly built truck with metal wheel arches and a heavy chassis - there was no obvious damage to the truck and the driver kept it straight and was able to stop safely. And that was all just normal operating pressure (I assume). Also followed one of these trucks as it had a mechanical issue and something obviously jammed the drivetrain - thing stopped dead in the middle lane. I can live to tell the tale because I was keeping a safe distance!
Slight annoying damage and nothing else.
Put it inside of car!!
Like NASCAR, tears up bodywork, although composites used now, much less damage.
I'm an F-15 aircraft maintainer, and in our technical school training we are shown a gruesome picture of "Hamburger Man." He used a method of filling a tire called the "hot shot." Without a pressure regulator or gauge assembly, he used the high pressure (up to 4,000 PSI or 272 BAR I think) side of a nitrogen servicing cart to fill am aircraft tire. He miscalculated and the tire did a rapid unscheduled disassembly, which greatly increased the unfortunate bastard's surface area many times over.
As a former 2A672 that maintained those SGNSC's, this checks out. Hamburger Man is real.
@@coryd4160 "danger is no stranger to an AGE ranger!"
@@rhubarbpie2027 LOL I almost forgot about DINSTAAR. Too funny. Good luck to you, my man. May your exploits be never indelibly enshrined by TCTO.
@@coryd4160 thank you! I hope your future ventures are explosion free as well 🤣
@@rhubarbpie2027 *Principal Skinner voice* may I see it?
“If anything goes to shite… it doesn’t matter” truer words have never been spoken.
As a tire technician, I have seen tires explode, especially with split rims, but when the technicians are airing up the tires, they are on their side, laying on the ground. It would be nice to see the explosion with the tire laying down and how high up it actually flies when it explodes, when you walk into a tire shop, take a look at the ceiling for telltale marks, now we have safety cages back then we used chains, but before that we did not have anything. Thank you for putting this on.
I worked at my Dad's gas station in the early 70's, and we didn't have a cage either. Split rims were known to kill people and we never liked doing them. When we did, we'd lower the arms of one of our hoists over the tire and rim to at least prevent it from hitting anyone.
I realize I am replying to myself When we were working on the side of the road on a transport we would wrap chains around the wheels but when you have to keep the split rim from popping out you have to keep going around the tire hitting it with your sledgehammer as you see the metal start to come up you have to hit it back down with the chains wrapped around it it was very hard to do so lots of people chose not to put the chains around it so you could see the ring better as it’s lifting Up
As a non-tire technician, why are you even filling a tire to the point of explosion?
Reply to Ed Nobody knows when a tire is going to explode, it could be from a defect in the tire or with with what we have for safety reasons, But with the split rim, there is a little ring of metal that goes around the inside that tries to hold a bigger ring of metal in place as the tire is being inflated, and you have to keep hammering that little piece to keep it in place as it is airing up, sometimes it don’t work and explodes But I have seen one guy who could not get the rusted metal Apart so he just put the air hose on it and walked away and never told anyone else that was working in the shop. He thought it was funny when the tire exploded, there are.Ass;/&-/s like that everywhere in the world.
@@glennranger4091 Ah ha.... Did not know there was such a thing as a split rim wheel. Googled that, and now I've learned something. That's what it's all about. Thanks!
I had to watch this! About 55 years ago I was mounting a 15 inch garden tractor tire on a rim so I could use it on a home made dune buggy. I was kneeling down on a concrete driveway and holding the air chuck on the valve stem. Really don't know how much pressure went in, but the bead cable/wire broke in the bottom bead of the tire. The rim and wheel went straight up in the air through an aluminum car port and probably about 20 feet higher. I was stunned and when I came to my senses I was watching the tire and wheel come back down and bounce off the hood of my '62 Chevy p/u. Then I realized I was standing where I had been kneeling and I was holding my right arm with my left hand. Both bones in my forearm were shattered and had to have surgery with pins implanted. This is entertaining to watch, but not to live through. Everyone should be really careful with tires and air pressure. I'm very thankful I was not decapitated or killed!
A man that went to my congregation had his arm blown off by this very same thing! I never talked to him because I was just a teenager, but that was what I had heard what happened to him... 😩
Wow thank god you survived. That’s some crazy shyt!!!😮
Thank you for sharing your experience. A day shift worker, about five years back died because of a tyre explosion. It is rather a comfort that he likely felt nothing. I saw the damage it did to the Few use the tyre cage. It has to be signed out to get it out of the equipment room, as all the heavy duty equipment had to be. Often, my signature is the only one for the entire day. What are the odds that I am the only one that changes tyres in a work day? It is unlikely. I saw the hideous damage done to the sleeper cab from the explosion, a few nights later.
i had the same thing happen to me less than a year ago. was holding the air chuck on it and i think the tire had a defect or something and it blew right up into my arm and bounced off the roof of our shop, it was so loud i couldn't see or hear anything for about 20 minutes. i'd hate to think what could've happened if i was standing just a few inches closer :(
Yeah there's no way you could be thankful if you were dead.
The obvious next step is a quarry truck tyre. Those really aren't cheap though!
Maybe get a scrap one that's worn too thin to be fixed?
A farm tractor tire would be a nice in-between step, and those are very cheap.
Scrap ones can hold air still definitely! buying a new tire would not be worth it at all.
@@fxui Of course. But even the scrap ones are expensive, and you'll need a rim as well.
Tractor tires could be a good intermediate.
My comrade friends, I do this with basketball ago many years, yes. Done in a station for refueling of car. Strapped to the basketball was the hose for air. On lever was belt for air to go. Me and good friend stand back and watch ball explode. Very loud. Rubber pieces fly far. Basketball no good for the playing of basketball no more.
Really? How surprising!!! 🤣
"Where the hell the rim went?" I just love the way you speak. You seem to have grasped the English slang very well. I can understand you easily. This was me at 12yrs, but on a smaller scale. Thanks so much!
This was quite impressive. If you do this again, I may suggest having a pressure gauge in sight so we can see how much pressure the tire is at and know when it is getting close to critical pressure.
You might want to look into getting your hands on some rupture discs for the next test. They can tell you definitively whether or not the shock waves themselves are lethal to a human where they're placed.
Aside from the obvious lethality of losing a head 🙂
@@mikelastname that would require extensive surgery.
@jameswest8280 Dr. Frankenstein can fix that up right quick.
@@mikelastname Yep, shock waves are the least of your worries when your head is 200m away.
@@jameswest8280just a little duct tape, he'll be fine.
Changed my first truck tire at 12 years old, and I have done thousands of tires. Never had one come apart, giving GOD all the thanks for that. Old suicide wheels were probably the most dangerous from a mechanical standpoint. Split rings, 2 and 3 piece. Off-road heavy equipment split rings. I remember a Dart Clark loader at Cottonwood Arizona that had an ejector bucket, 50 ton bucket fulls. I don't remember the tire size, maybe 365/65R35. I know it took half an hour to let the air out the tire.
I remember about 50 years ago reading about a mechanic who was killed by an exploding tyre he had left on a compressor. The shape of his body was printed in the grime on the garage ceiling.
I've experienced 2 tire explosions in my career as an automotive technician, a 16 inch split rim and a 24.5 inch HD tire. Definitely sobering experiences. I appreciated the safety equipment.
Split rims scare the crap out of me.
(40.64cm and 62.23cm)
@@pappi8338 Rim sizes are measured in inches (R14, R15, etc) while the tyre/tire width (fatness) is measured in mm.
I had an E-rated truck tire blow out the sidewall about fifteen seconds after I pulled my hand away from airing it up to 120 PSI. Sounded like a mortar round. If my hand had still been there it would have been blown off.
You should try a split rim wheel. They fail more catastrophically. Also, I think if you put a drying tube on the high pressure compressor input, you shouldn't get that cloud that obscures everything. The drop in temperature when the air expands causes the water vapor to condense.
Only split rims I see are on decommissioned box trailers used for storage.
@@mrwilson7617 They're on military vehicles, farm vehicles and industrial vehicles (i.e. not regular road vehicles) all the time. If you look up pictures of HMMWV wheels, they're pretty much all split rims unless the million bolts around the inside of the wheel are for show. (not "humvee" though. the civilian garbage is garbage). But I know what you mean. When I was changing tires a long time ago as a job, I didn't even know they existed until someone brought in a 1950s box truck with left threaded studs on half the wheels. I didn't know left threaded studs existed either.
@@htomerif HMMWV wheels arent a "split rim" in the same sense as the old RH5 where they basically snap-ring together. the HMMWV wheels are a 3 piece double beadlock with a inner, an outer, and a "clamping hoop" for lack of better term. the double beadlock sandwiches both the inner and outer beads positively by having the "clamping hoop" between the two beads when the outer wheel parts are bolted together. with the o-ring between the wheel halves clamping surfaces they dont run tubes and hold air pretty good and can be run offroad down to zero psi without risking losing a bead.
@@bert5003 Yeah, I know. There's two kinds. The kind you're talking about, the locking ring or clamping hoop or whatever its called is only held in place by 8 or 12 bolts or something. The vast, vast, vast majority of HMMWV wheels are the two piece, 24 bolt split rim and the only deviation you're going to see are the ones with the pry bar hole attached. Are they being replaced? Probably. TBH, I have no idea how the ones with the locking ring work or how they fail. At the motorpool I worked in everything had to be put in the inflation cage after assembly.
@@htomerif idk, i got a set of the 24 bolt ones re-centered with custom cut pvc clamping hoops to run on my jeep and theyre pretty solid. i only wish they were a 17" wheel. the big thing though is that the bolt together wheels arent a "split rim" rather a multi-piece wheel. they arent dangerous unless you explicitly start unbolting the halves under pressure. some proper split rim pressure testing for all the danger would be super cool though
My family owned a construction company since the 1970's. In the early 80's an 18yr old kid was changing a split rim and didn't put the safety chains over it. It exploded and decapitated him. My grandfather, who owned the company and was a great man, never forgave himself for the accident even though it wasn't his fault. I'm a mechanic and refuse to do anything with a split rim because of all the horror stories I was told about them growing up.
My father said the same thing to me when I was a kid, don't mess wih split rims, they will kill you. I've always wondered why (because I've seen the Pakistan/India guys go flying up in the air), if the ring is seated properly? I guess the saftey cage is about the best people can do, but both I and you have probably seen these fully inflate only to blow apart while being rolled over to or mounted on the truck. It must be that the ring isn't fully seated, or it's over inflated? I'm not sure but I don't like them either...
@dc6233 Yeah neither do I man. I just have it planted in my brain to leave em alone. That accident happened in 1982 and to this day a piece is stuck in the ceiling of the one garage. Crazy the amount of force that comes from them.
@@jasonjaeger4042what happened to the head?
@@JohnnyDanger36963 it's mounted on the wall at our camp
Jk man, I assume the buried it??? Maybe cremated it? Lmao, idk if ur a psycho or just fuckin hilarious but that comment made me laugh pretty hard
Always wanted to try this experiment since I started being a mechanic over forty years ago. Thank you. Loved it.
You had me at, "this professional arrangement." Never before have I seen such an excellent demonstration of why a beard net is important. I pity the calendars.
The trouble with the first tire made him loose his head LOL The tires are really dangerous ha ha
PSI doesn't sound like much until you start counting all of those inches. A standard house door has about 3,000 sq/in. A nuke has an overpressure wave that does most of the damage and it crushes heavy concrete buildings at 7PSI over atmospheric. That's 21,000 lbs on your front door. Great content guys!!
Can you convert those to normal units?
Those "are" normal units though, at least for americans. Although, 21,000 pounds is roughly around 9525kg, give or take. @@pappi8338
@@pappi8338 convert these nuts into your mouth pappi
@@pappi8338convert it yourself lol.
@@pappi83383000 square bananas = 1.94 square metres, 7psi = 48kPa, 21000lbs = 9.53 tonnes
I can tell you from personal experience, that as simple as blowing up a MTB tire is EXTREMELY loud. Blew up in my face and my ears were ringing for a solid minute after. Almost shattered the windows of the building as well
That first explosion shows that it's not just the force of the blast but where the debris goes. You can see how the tire snags under his arm and around his head, taking them both with it as it continues on.
When I was in my 20's I worked for a repair shop that also did big truck tire's and military vehicle tire's. I was asked if I was willing to help if needed, I said yes. So we had to take a safety class on changing the tires on a 6 and 8 wheeled military vehicle. During that class they showed a video of when the bead of the tire fully seated to the rim, with the tire laying flat on the ground and a Honda Civic sitting on top of it. The Honda jumped about 12 feet into the air!! We had a full steal cage we put the tires into while we aired them up. After 30 or so of those tires, it was trash!! There was an incident with something exploding, but fortunately I was doing my normal job at the time. It sounded like a bomb went off!! Shook the entire building, knocking off dirt and dust from the ceiling. Crazy stuff!!
I worked in a tire shop for a few months years ago. We had a safety cage for inflating split rim tires in, made of very heavy gage tubing. It was notably buckled out from a previous tire explosion. I used it religiously.
I can confirm this is how it happens irl. I had two semi rims pop off back in my last life, the tire stays and launches the rim across the shop. Both times it happened immediately after checking pressure at 85-90 psi, put chuck back on and turned away, boom. Both also were aluminum rims, the outside lip folded over on both.
I sell and repair high pressure breathing air compressors, including Bauer like the one you are using. I have been asked about air chuck attachments for the reels on the systems. While low pressure regulators are available this is a clear demonstration of why I will not install them on systems without those and proper relief safety valves. In an inclosed space this would be even more devastating. Great job!
7:45 truck tire casually walks out after causing total mayhem in the tire shop.
Like the hero walking away from the exploding building.
@@mattagnew206 Let's name it Robert.
I used to be a tire installer one of the more senior techs and safety was always my top priority. Explaining split rims to the youngsters, proper bead seating techniques, not putting your fingers near the seat of the rim, never reaching over the top of inflating tires etc... it's not a dangerous profession if you are properly trained and don't try to do anything that you are not confident in the process/procedure of
Didn't expect the car tyre to be that energetic! Thanks for giving me anxiety every time I inflate a tyre now.
This is a very serious issue for those that inflate tires for a living. Years ago I was at my local pub and two gents were looking very sullen. They just watched their pal get cut in half by a tire that exploded during inflation. No, they did not use the proper guarding.
Yup I know a guy who died from a truck tire like this.
I went a few times to the tire shop for a number of new tires. Never once did they use a cage.
Generally large truck tire assemblers are required to use cages in the states. @@carpediemarts705
I personally know a guy who was a mechanic - he had BOTH of his feet severed at the ankle when a truck tire went. He sells wheelchairs now, no joke. Air pressure is the only thing that scares me as much as centrifugal force and that demon electricity.
Its far too easy to get lax about safety because you easily get used to working around very dangerous stuff. I worked in a lumber yard in a millwork shop through HS and college, and at first I was very wary of the machines. After a while they're nothing, you're not intimidated by steel belts with sharp teeth grabbing boards from your hands, not so scared of the giant cross cut saw, etc. At that point you have to fight yourself to always be aware of proper safety, which can be mentally taxing when you're doing work that has become second nature to you.
Very well done and a great demonstration of tire danger under high pressure.
This was so cool. Great to see you guys are still making great video's and having fun
I work with an older farmer in the neighborhood. I stopped by one day to see a 60 year old man laughing like a kid. Once I figured out he had an old tractor tire connected to the air compressor on the driveway in front of the shop, with the regulator turned up as far as it would go. The first compressor maxed out at 120 psi, the second compressor maxed out close to 200 psi. It set outside the garage with 200 psi on it for over an hour. When it came apart it shook the barn and probably went 30’ in the air. The tractor tire was an 18.4 x 38 Tractor tire. It was old and dry rotted and all he wanted was the rim for a burn pit ring. Once of the sketchiest things I have ever been around. He wants to try another one in the center of a field with air and propane mix on a fire. Great Video, Thanks from Michigan.
Farmers r great. They work w their hands and fix shit. Sometimes making their own way
That's a good idea with the propane air mixture. I suppose it would be twice as loud
@@duramaxdadfarmers are privileged not great they get given a lot of free shit in life. They are the only people in the uk who have enough land to drive around all day on quads and dirt bikes you can’t do that on uk road they are also the only people who have enough land to hunt with and therefore are the only ones outside of gun clubs who get to keep guns in the uk plus they constantly whinge about how poor they are and sure they might not have much expendable cash but they usually have millions in assists mostly inherited
@@duramaxdadoh did I mention that there job is really just working with animals 24/7 which in all honesty is a lot of peoples dream job the only other shit they be doing is sowing the land and watering crops which again is done with a tractor and is a piece of piss to do they aren’t out there plowing the field by hand or using cows this isn’t the Middle Ages oh and they have access to buy combustible or volatile materials not available to the public which is just another one of there privileges
@@grime2.085 R u a farmer? Go follow one around for a day. U like to eat right? Thank a farmer today instead of pointing out their privilege to work.
Instead of a 22.5, use an industrial tire that goes on a rim that bolts together. The 22.5 has a relatively light wheel, with a bead angle that allows it to slip over easily with a bit of deformation. We want the tire to blow, not the tire to slip over the wheel.
This.
a 10.00-20 or 12.00-20 or 24 all the XX.5 inch rims have the 15 degree tapered bead seats
The only stupid part here is that he explained the extensive time it took to blow up the tyres. You didn’t even think about how long that would take. The camera batteries simply don’t last that long. Even bottled gas may not explode those types of tyres.
@@motoboggin2619 it's been awhile, but all the 20" I've ever changed were splits.
@@teeanahera8949 well, he'll have to figure out a remote trigger, or use a large bore valve. If they don't blow at 4.5k I'd be surprised. Worst case, they have to open the drain valve on the compressor.
Man that is scary shit. I had no idea the damage a tire exploding off a rim could do. Thanks for the enlightening info.
Great vid mate. That was fun. It is great to see both of you in the vid. Regards, Jas.
A guy in the next town from here was killed while filling a huge tractor tyre. The force threw him about 15 metres in the air and about 30 metres away. Every organ in his body ruptured with the force. What it did to him was not pretty, necessitating that he had a closed box funeral. That tyre shop now has a reinforced safety cage to accommodate huge tractor tyres as well as updated ones for truck tyres. Respect from South Africa 🇿🇦
Crazy man. Liquified his insides. How are things in SA?
@@yankees29 good-ish.. it all depends on how one sees things. A pessimist will see a half tumbler of water as half empty. An optimist sees it half full. A realist will put two shots of whisky and some ice and say "Cheers!" I'm a realist..
@@rognvaldrasbjrn3972 ok that’s the spirit
Hell yes! I have been asking for 4500psi compresser content for a while too!
I just have a little Yong Heng model with less capacity, but 4500 psi is 4500psi!
@@joshuagibson2520 Next time I will use nitrogen bottles. It was terrible to wait this one :D
@@Beyondthepress good idea, much faster.
Thanks for this.
That was fun to watch------Thanks!
07:43 everyone sing along ... 'you picked a fine time to leave me loose-wheel'
I remember about 60 years ago seeing a picture of the aftermath of a tractor tyre doing this somewhere in Italy. The ceiling had the imprint of a farmer, who had forgotten what he was doing, and went back to disconnect the airline.
Jeez, I can only imagine the force an exploding tractor tire would exert. Truck tires are scary enough, but tractor tires are designed to handle absolutely absurd amounts of axle torque so they are built very heavy and thick
That is not the way I want to leave my mark.
@@thecrazyfarmboy Actually I'd much rather be near an exploding tractor tyre. They blow at much lower pressure, mine blew at 40-45 PSI while trying to get the bead to seal properly. Truck tyres handle much higher pressure and are much worse when they blow.
I remember that, it looked like a shadow.
I used to be a semi mechanic and was told a similar story. Guy was leaning over a split rim and it blew. His body was imprinted in the ceiling.
This was amazing to watch. Wow.
Again, a good experiment with explosions. Thanks.
Former tire tech here, I loved the job but this is something I do not miss. Even for a smaller truck tire, it bows out the cages we used. If they were run flat with no signs of inner casing wear after repair, they typically go boom between 70-85psi.
I don't miss slamming a run flat on the ground, getting the tire bar with lube and jamming it into the bead to break it. Thankfully I survived and never had an accident but what the fuck was I doing man lmfao
@intruative hey man we all had to start somewhere, it was a fun job, took out alot of anger swinging that duck bill.
I used to change and fill tires on split rims in the Airforce for c130s and a10s. We had to put them in a cage before inflating them for obvious reasons. You should try this experiment with a split rim wheel and only use a couple bolts so it will fail. It will be much more devastating than a traditional wheel and tire.
They need to pick up some used military surplus airplane tires. I can’t imagine what those are designed to resist!
Wow those are my two favorite military aircraft. Ty for your service to our country. You literally made the wheels spin!😂
Great Vid. As a Mechanic and occasionally having to change tyres on HGV wheels, I was always very nervous when inflating them. Even in the cage.
BACK IN THE 90'S.... I had a MEGACHAD customer bring me a huge slick that he had mounted by hand but couldn't seat the bead and inflate it. Fortunately, I safely mounted the rim so when the bead broke, I only got a black eye, bruised tailbone, and reminder of why I payed attention in the Safety Class. We became buddies and he turned into a great customer when later, I let him watch me mount a tire properly.
Good times 😅
And this is why you do pressure tests with water and not air 💥
I think we have to also test some steel containers :D
@@Beyondthepresssee if you can explode a BBQ gas cylinder.
@@Beyondthepress Easiest way to do that would probably be to ad water and heat it till it blows! 😎
I have an ad blocker. Does it need to be turned off to watch that? @@klasandersson7522
@@klasandersson7522 Ohh yeah, a nice BLEVE would be a sight to see! (Boiling Liquid Expanding Vapor Explosion)
A friend of mine worked at a truck shop many years ago. One day a tire for an 18 wheeler exploded (locking ring wasn´t properly seated) it blew out several windows in the shop and also damaged the roof. Luckily they were at lunch break in another building when it happened.
A guy was killed where we had our truck tires serviced in the 70's from filling an uncaged two piece rim. I was drawn to this video from that old memory...
This was awesome you guys!!
I worked at Sears Auto 20 years ago and whenever we got a tire that had an egg in the sidewall we would put it aside to blow up later at night. It was dangerous as hell but we laughed so fucking hard every time and the sound of the weakened sidewall rupturing was so LOUD. I still remember the first time a coworker intentionally did it during the day and chunky tub (asset protection manager) waddled over from the main store to see what the loud boom was.
I can't imagine a better vacation than doing stuff like this. Thank you so much for the video!!!
Great episode! Be safe 🤘
This guy is great. He takes the stuff that the kids do on you tube, way up to an adult level. Serious business for sure. Great video and you have a new subscriber! Thank you. J Poll.
Those truck tires are no joke, even at normal pressures. There's video of a mobster slashing a box truck's tire, and it blew him into the air and shredded his clothes.
I was maybe 6m away on a footpath when one blew out on a multi wheel trailer going past, and that was loud enough.
The worker was so dedicated he even tried to stop the tire from rolling away after the explosion. Impressing!
Hard to get good help like that. Especially conscientious employee! 😂
Aaron Kaufman would do nothing less...
Really cool! I always wanted to do this to air compressor tanks.
Bro, you are absolutely the number one!!❤
lauri this was one of your best ideas ever
The scary thing about this video is that around the world there are set ups like this but with real mechanics who end up being a statistic. Great fun video but also educational and could save a life by raising awaeness of the danger of over pressured tyres.
Amazing video, I’ve often wondered what this would look like and now thanks to you guys I know
You’ve come a long way since I watched you shopping for food years ago. You have made my day with this one! Bravo!😂❤
There was an incident at a mine here years ago. One of those massive dump trucks was parked next to a hut, used as a break room. I can't remember the exact specifics but along the lines of the locking ring failed and it was flung at the hut with such force that it more or less demolished it. Fortunately no one was in it at the time. Site rules were updated to state that vehicles must be parked away from the huts and positioned such that if anything went wrong bits would go flying in other directions.
They were fortunate, safety regulations are all too often written in blood.
Walking to work one morning a lot of fire and police activity, where the rugby club ; a timber brick and glass structure; used to be was an open space, the building was scattered all over the field. A safety valve on the boiler for the showers had failed , a few hours earlier the club was occupied by a few hundred people at a disco, very lucky indeed.
If you have to call any structure a "hut", you already know you're in danger 🤣
Excellent Video. I once exploded a bicycle tire while inflating it at a gas station. Damaged my eardrum! I can imagine what these explosions sounded like. Great job!
Well buddy, you dodged a bullet there. That stupid stunt has killed quite a few. Spokes become flechettes and can go straight through you. Or anybody stood close. Why would anybody do such a thing?
I did the same thing when I was a young-ling... I failed to understand that the pressure gauge did not read the internal pressure while inflating.
Me too. Young enough to not know tire inflators put out WAY more pressure than a 10 speed pump. Long walk home too.
What a treat ! Greetings and love from Boston, Massachusetts.
that guy's excited reaction in 3:50 is the best lol
Holy hell you have out done yourself again excellent work I can't wait for the next tire video 😀
This actually serves an important purpose. People often take for granted how dangerous a tire can be if over-inflated. Even a small car tire will tear your face off if you were as close as the mannequin in this video was. Semi tires are like bombs if they explode.
Tyres don't have to be over inflated. If driven at low pressure, the heat can weaken the sidewall and fail when reinflating, especially larger vehicle tyres running over 100psi.
This was epic and AMAZING!!
Now this is a most excellent thing to watch sir.
3:35 This is the ONE time EVER where the normal speed is BETTER than the high speed!!!
I had a good friend of mine lose his father to this when we were young. He got distracted by something in his shop and forgot he was filling a tire and it let go next to him. One of the few reasons i don't like air compressors in silent rooms where you cant hear them running.
Nice touch changing the calendar month with the second tire.
Hey Beyond the Press. Love you guys, you rock! Imagine how much more devastating in an enclosed space/ room‼️‼️‼️💯
Been watching for years. Love the channel. Thank you for what you do. 👍🤙💯🤌💪👊
I did not expect the rim to just go flying like that. But with the second tire the air blast actually blew out the wall before the rim could hit it.
Are you sure you want to quit without saving? 📎
That’s crazy guys. Here in Australia the Truck tyers are pumped up in a steel reinforced cage for obvious safety reasons. The explosive force in a over pressurised tyre is incredible.
This is probably my favorite channel on KZhead. I have yet to be disappointed. Anyway, I’ve seen a 19.5 tow truck tire take out an entire 20’x 20’ garage door. I’m just glad I was on the other side of the building when it happened. Y’all should try the biggest tractor tire you can find or even an old split rim, those things are nasty when the ring comes off. Stay safe and keep em coming, I await my notifications.
3:43 even the compressor was laughing. 😆
OMG, thats so amazing I love this channel
That pipe stand you made couple years ago has stood up well to many explosions. Prrriiti Guud. 👍
It has seen a lot :D
Oh... my.... gosh.. you have another channel??!? Wow just found this... this is super awesome!!!❤❤❤
The first tire was more hectic but the low speed on the bigger tire was so cool to see just flop like jello, man u guys gotta love your job, looks more like fun to me! Got me hooked, awesome job! ~ZJAK
If you try this again, you should get some burst discs and place them at several distances to see how far away someone would have to be to survive.
In out local tyre depot is a steel barred cage, asked the tyre fitter what they use it for, he said tyres have exploded off the rinm especially big truck tyres, and killed staff previously in depots, a huge amount of pressure all trapped in a rubber wheel and rim, treat tyres with respect, some have many pounds pressure in them
There was actually coffee in the Starbucks cups on the table. That kind of attention to detail is exactly why I love this channel.
Simultaneous dual bead break! When servicing aircraft wheels, you must stand to the front or back (treads), not facing the side (axle nut), facing the side when a wheel fails is instant death or dismemberment.
How to laugh at a flying head, then to feel really, really, bad about laughing about a flying head. And then shock sets in as you realize what it is that just happened.
Please... A moment of silence for the calendars....
That is freekin awesome dude 😎 good job
This was a great collaboration... Sean from Bikes and Beards was pretty brave for holding those tires like that.