You gotta pull the tire over to somewhat "seal" the bead, and allow the rapaid expansion of gas on din
@acemassey36182 жыл бұрын
When you run a fuse of ether out to the tread,it gives you time to light,then grab a sledge hammer and smack. Works every time.
@johnwade57472 жыл бұрын
نََزدرََربظ رزدبذزَنخ
@user-hi2vo9rk7u2 жыл бұрын
and at the last second, the bead came back off the rim
@Petrochemtester3 жыл бұрын
مرحبا ما اسم هذه مواد مشتعله
@jamaldreij2582 жыл бұрын
Nicely done 👍
@screwsnutsandbolts2 жыл бұрын
Good
@wildlife4klife2 жыл бұрын
Opa
@joaquimdarocha2 жыл бұрын
Had the same problem. Never got it beaded. Didnt work for me. Maybe cheap Discount Auto Parts Starting Fluid? Could never get a boom. The fluid seems to burn too slowly, like charcoal lighter fluid.
@randydicotti39756 жыл бұрын
Randy DiCotti it burns too slowly due to lack of oxygen in the tire. Add some air after the starting fluid and it'll expand very quickly.
@travism45286 жыл бұрын
Lots of other videos show guys giving a good wack with a 2-3 # sledge hammer, immediately after lighting. Then it pops on bead. Reason is the hit force induces more air to flow in making fire spread quick as it "explodes" in controlled fashion. Then add air at valve. Some guys have air going already at same time.
@psalm2forliberty57711 ай бұрын
Wow,,, keren kwan
@MARIBERSELAWAT2342 жыл бұрын
nice
@An_892 жыл бұрын
i use oxy acet works great
@charlietanner62116 жыл бұрын
Po
@rajimohamade15932 жыл бұрын
You’ve got to have air going into the tire when you light it or the either will just slowly burn
You gotta pull the tire over to somewhat "seal" the bead, and allow the rapaid expansion of gas on din
When you run a fuse of ether out to the tread,it gives you time to light,then grab a sledge hammer and smack. Works every time.
نََزدرََربظ رزدبذزَنخ
and at the last second, the bead came back off the rim
مرحبا ما اسم هذه مواد مشتعله
Nicely done 👍
Good
Opa
Had the same problem. Never got it beaded. Didnt work for me. Maybe cheap Discount Auto Parts Starting Fluid? Could never get a boom. The fluid seems to burn too slowly, like charcoal lighter fluid.
Randy DiCotti it burns too slowly due to lack of oxygen in the tire. Add some air after the starting fluid and it'll expand very quickly.
Lots of other videos show guys giving a good wack with a 2-3 # sledge hammer, immediately after lighting. Then it pops on bead. Reason is the hit force induces more air to flow in making fire spread quick as it "explodes" in controlled fashion. Then add air at valve. Some guys have air going already at same time.
Wow,,, keren kwan
nice
i use oxy acet works great
Po
You’ve got to have air going into the tire when you light it or the either will just slowly burn