How Many Blokes To Strip A Range Rover? | Range Rover Series Part 3 | Edd China
How many blokes does it take to strip a Range Rover? 😂 Welcome to part 3 of the 1986 Range Rover Chassis series so far!
Did you miss part 2 of the Range Rover series? Watch it here: • Will We Get John's Ran...
0:00 - Season 1 Episode 26 "Fix it up, or Blow it up? 1986 Range Rover": Worst MoT test fail ever?! We know John's Range Rover is in a terrible state and now that it's Official, we'll have to decide whether to do it up or blow it up!
23:09 - Season 1 Episode 34 "Project Rat Rover/How many guys does it take to change a sparkplug?": How many blokes does it take to strip a Range Rover? Finally, the real work begins. We are ripping the body of John's rotten old Range Rover, it shouldn't take long, it's mostly rusted away already. The guys rally around to help with the task, but are they helping or hindering?
39:12 - Season 1 Episode 35 "Range Rover separation anxiety": No one gets to go to the pub until the body is off the chassis! Ripping the body of our rotten, rusty Rat Rover shouldn't take long, it's mostly rusted away already. But there are always those little bits hanging on until the end. The guys are back to lend a hand, well, half the point of having a workshop is to get the boys around to hang out and chat, so what if things take a little longer?
56:01 - Season 1 Episode 36 "How much filth can you hide in a Range Rover Chassis?" Hazmat suits on to tackle the filth! The Rat Rover's body is finally off, so Paul and I can now strip down the chassis to its component parts. But not before we give it another thorough clean. This time we're getting to blast off all crud that managed to hide between the rusty body and its rusty chassis.
01:21:48 - Season 1 Episode 42 "Laser cleaning a rusty Range Rover chassis": We've got our hands on a 1000w pulsed laser and we're going to use it to clean all of the rust off John's Range Rover chassis.
Hi, I’m Edd, and welcome to my channel! Here you will find clips and full episodes of my show Workshop Diaries, produced with the help of my crew of production pixies. Make sure to subscribe to be notified of new uploads.
A huge thanks to those of you who have already become ‘Patreons’, it is brilliant to have you on board. For those interested in joining our happy throng, you can support the show directly, by going to: / workshopdiaries
Thank you to my brand partners who are supporting the channel. To find out more about them, please go to our website: www.workshopdiaries.com
🛠 RWC: www.rwc.com/
🛠 Milwaukee Tools: uk.milwaukeetool.eu/
🗣 To Ask Edd questions, email - AskEdd@greasejunkie.com
If your company would like to get involved as a commercial partner, please contact ian@illuminate.tv. If your company has a cool or interesting product or process that you think the audience would like to find out more about, please do also get in touch!
Follow me on Social Media:
Instagram: / theeddchina
Twitter: / theeddchina
Facebook: / eddchina
#EddChina #WorkshopDiaries #WheelerDealers #FullEpisode #FullEpisodes #Mechanic #Engineering #Engineer #1986RangeRover #RangeRover #RangeRoverChassis #RangeRoverSeries
Did you miss part 2 of the Range Rover series? Watch it here: kzhead.info/sun/iMukodOdamV-Z40/bejne.html
enlisting dads army when they are winkled out the wood work watch out
How many Blokes to put out repeats would be a better title!
The Shark has decidedly been jumped, the Fat Lady has sung and Elvis has left the building! It was jolly fun!!
😂😂😂You should rolled the chassis with the mechanics onboard, to the MOT centre....and seen the reaction. Hmmmmm, just need a little bodywork, I think
I've been watching Edd since his wheeler dealer days. Although I'm not a mechanic, he's inspired me to get my hands dirty and confidently do most of my servicing and repairs on my cars. Brilliant man and great creator. Keep up the great work and super content.
Ed has previous of going AWOL tbf
Edd had a channel called Edd China’s Garage Revival, he disappeared from that too!
We need to make a T-shirt with a milk carton with Missing Edd China, hasn't been seen on KZhead since. 😂 Hope he's doing well. I've even searched U.K. news and haven't seen anything, yes if something happened to him it woukd make the news.
Its probably difficult to get good sponsorship deals for such a patchy channel and that is all that is wrong with anything or anyone.
'How many repeats does it take to lose the good will of your viewership?' .. I'm at my limit..this is just spam at this point. You should fire whoever put this forward as a good idea. I'd sooner have no new content than this.
Fascinating to watch I've replaced a chassis on a land-rover 90 before took 9 weekends in a barn and several cups of tea 😅😂
Edd. I think that you have finally found the BEST format, this is brilliant!!!! Keep em coming please!! Simonm
I love Carly❤
Love the Range Rover Series 😀 Keep up with this Projekt..
Now that's distinctly above my pay grade.
This is no way to run a KZhead channel. Continually re loading older posts without some kind of explanation as to why, is going to cost subscribers. If Edd is unwell or unable to film, then one of the crew should be able to explain what is going on
I think your one of the best engineers out there but the repeats have now pushed me away and caused me to stop supporting the channel I understand you have things going on in your private life but not even a update from you or the team to just say your stepping away for a.bit etc
Great mechanic great review love your work hope you're doing well we all miss you ❤️
So nice to see Paul!
Great that Paul has a 1 series I have a 123d coupe e82. I haven't seen a restoration of one of these great looking cars on a program and as paul is the hero from wheeler dealer days wouldn't it be good to recondition and upgrade his 1 series 😁 thoroughly enjoy watching you dive deep into a car and explain what's wrong and how to troubleshoot looking forward to more videos great work!
When are you going to get around to fixing John's 4WD? Michael from Australia 😊
Fascinating and absorbing!!
I remember the list of fail from the first time round, and I'm amazed they actually let you take it back to the workshop instead of just sending it to the crusher with all the faults... :P
Love the channel Ed and have loved watching you since Wheeler Dealer days but can we have some new stuff please or an update if you are busy doing other stuff. Cheers.
Something's going on... no new content..🤔
Almost as long as the list for my transit! I double dare Edd to do a transit next, lwb hi top!
Brilliant hurry up with the next part
So this is quickly turning into "How to build a Range Rover from scratch" 😂 keep it up Edd 👍
Ok ok but when a new episodes where you pass all test of MOT?
6:51 Got the text pop-up. Essentially John had "broken" it back when 1986 Range Rovers were valuable by modifying the switches on the dashboard to disable the starter circuit to stop anyone stealing it.
For front axle rebuild complete kits available. I would also advise upgrading the brake disks to britpart drilled and grooved same money as standards from motor factors, ebc fast road pads. I did my discovery about 5 yrs ago so I know your pain.
When will we see a update on the range rover because at the moment you are just showing repeats.
Just checked in having unsubscribed over a month ago due to lack of new content. Hey presto, still no new content since last year
How many video repeats to strip the same Range Rover ? You may have problems Edd but your fans deserve some respect.
"Never got around to it?" along with every other job on the RR. He might appreciate Edd's level of required work more if he actually got involved in more actual action and less sarcastic arrogance 😮 yes you do need to give Edd a hand 🤔
Any new one video Edd
Hi Will the Carly work on a OB1 (2002 Mitsubishi Challenger +Aust+) # Carly
Seriously hope all is well with Edd and crew. All I ask is can we have an update video on what’s happening behind the scenes? I’ve been trying my best to be patient, but this is at least the fifth re-upload without a single word, other than “new content is coming soon”. You could get away with re-runs for a TV show, but running a KZhead channel is a different animal. Several re-uploads without a transparent and honest explanation will only erode the patience and goodwill of the viewers/subscribers.
What on earth is that text that pops up at 6:53 I can't seem to catch what it says
👏🏻👏🏻👏🏻Saludos y bendiciones desde Argentina!!
I don't follow, is this before the laser cleaning or after or is it a DIFFERENT range rover??
Remember that cool revival show he was doing on KZhead then that show just stopped? Then remember that other show he was going to do where he was going to work on a jaguar I think? Now he’s missing from this channel. KZhead works by regularly uploading content. Not re runs…
The garage revival show didn't get commissioned. I don't know why he left the e type KZhead programme.
Why are you bothering with this. Far too much wrong to be a viable repair. You are just chucking good money after bad. Just buy a better project to start with. The chassis repair alone wouldn't allow it back on the road in NZ
1:01 But it was already in the centre at the end of the video as you'd driven it in. I assume they moved it out again once got the shot required :)
Get on it edd 😮😊😂
Hello from Canada. Why do I think I've previously seen this?
Si tradujeras al Español sería la leche 🥇🙌
Hasn't been through an MOT since 2008
Laser time
Hope all is well for you mate
Great mechanic true legend never forgot but are you coming back soon take care stay safe ❤
He is much more than a mechanic a doctor of engines etc etc etc
Saludos de Mexico Edd
I know theyre repeats. But i like seeing it all together. Rather than bits here n there. Enjoyed watching it again
Repair it with love. do it up
Good work. Subtitles in Portuguese please. Very thanks.
The best engineer!
Lmaso, you and John are going to torture all of us with the re- build of the Land Rover….. enough said let the mayhem begin 😂🤣
Loving life ❤
I have not seen this before, so it’s cool he uploaded it
Guys you really need a Edd Chop Shop with clips and playlist. It's so much more convenient to catch up or focus on whatever viewers wanna see, like nerdy fixing stuff or viewers mail, etc. Minimum edit work for long time viewer value.
Has anyone noticed that the subs count has been going down?
Hi Edd 👋
Re-uploading our way to a million subscribers are we?
Wah.
Bought a Carly some time ago to find my MG is not on there list so it was a pointless buy until they update it, just realised how poor the lighting in your workshop is
How many blokes does it take to do reruns???
Isn't this an old video?
❤Love is not rational. It separates humans from everything else. Time to get busy with the restoration.
I've been waiting to watch this restoration, good to see you back online.
"what an impressive arse nal of tools"
👍👍🔥🔥
Edd did started to do volunteer work of Ukraine aid. I hope he did not ran over A I.E.D .
Enough: unsubscribed.
Indeed
me too
Too many re-uploads without explanation. I love you Edd, but I'm stopping my Patreon support and unsubscribing. I'll check in in 6 to 12 months to see if anything has changed, and re-evaluate.
Carly
How many blokes does it take to change a light bulb sorry couldn’t resist I am just a smart ass American
Obviously more than it takes to edit together a collection of repeats
Some subscribes need to be patient and more supportive instead of putting themselves in the first place. Chill out guys and let the man be.
guys i offered you the loan of my honda xr250r its a perfect bike for edd to learn on,paul please teach him of the two wheeled delights,it might have to go soon due to ill health,
Another reload. i love watching Edd, but there is only so many times you can watch reloads, you start to lose interest in the channel...sorry
Goodbye!!! See you if ever the repeats stop… now unsubscribed
this has been changed a completly restoration & will take too much time and also will need a lot of money.Not worth for tis car in my opinion.Good luck for you to do this
just sell it to mike he loves a bargain when someone else is doin the work .......
This week go and buy new hubcaps next week Jack up the hubcaps and drive a new car under the hubcaps
👍👍
I hate re-uploads.
Llegarías a más gente y ya chino la leche
rip...this channel
Get it fixed, get it Mot,d then take it to London and get it nicked !,
Hello E/C Doctor's Orders Laser Rusty 14/04/2023
who is this eejit in the range rover with Ed, excuse excuse, give him the keys and tell him to shove it.
What a separation! SpaceX could learn a thing or two here;)
Can anyone help please, I have a mercedes cls estate 2016 , I'm getting a noise something like drrrrrrrrrrr coming at the rear for a few seconds when I start then it goes away .I've got it checked by many garages including mercedes but no one knows what it is ,if anyone knows what is causing then please let me know. Thanks
🤷
I’m commenting
🤗👍👌
edd,日本語バージョンが欲しいです。貴方の才能に敬意を表します。
What is up with all the repeats???! Unsub
Really need a Carly in my garage
Brasil hello
Give me a shout if you ever put new content up
What's with all the recycled repeats, Ed? Let's have some current stuff, pleeeeeeeeeeeeeeese??????..