Caterpillar Head Cracked || Have You Seen a Repair Like This Before | Complete Repairing Procedure
2022 ж. 23 Жел.
2 005 895 Рет қаралды
Caterpillar Head Cracked || Have You Seen a Repair Like This Before || Complete Repairing Procedure
#machineshop #headrepairing #caterpillarHead #cuttingedge #machineshop #pakistanitruck #machinist
For inquiry Butt Engineering works
03008805006
It'll be fine. The guy next door makes the valves using the same equipment so tolerances will match.
Best laugh cheers
tolerances "we don't need stinking tolerances"
That's hilarious! It's all crappy, so a perfect match.
😂😂😂😂😂😂😂😂😂 P.M.S.L.
Dude, thank you for that. Needed the laugh.
Now you can all appreciate how hard your grandfathers father had to work to put food on the table. Great job guys.
I reckon these blokes do a great job considering their facility. If you really want to do something then no matter what the situation is surrounding you there's a fix for everything. I've seem and done head repairs before but this definitely takes the cake. The bloke on the torch is brilliant. Who can say that they have filled a gaping great hole in a casting with an oxy torch. If anything went on like that here in Australia the health and safety joker's would be having pink fit's. Just imagine stubbing a toe just wearing those scuff thingy's. Holy shit, my eye's watered thinking about it. I think your doing a great job fella's,
The issue is that their fixes generally do not last and can be dangerous. I get it and I'm not saying it's wrong of them but just saying it's not that great. Anyone can do this. I once filled an inch thick gap 3 feet across in shorts in the middle of summer... my father made me do it. I guess he was trying to teach me a lesson... not about welding but about the shorts... it worked. "How many guys can say they cooked themselves welding"? [And I'm sure you know that you don't know that until after the fact] These guys definitely get things done. Imagine if they actually had the tools to do a good job. Maybe that is why the US tries to undermine their society constantly.
I've seen videos of guys repairing heads on the track with melted beer and pop cans. Pretty sure it was Drag Week. Then they push 1000+ HP and race with that. lol.
And literally no overhead! Look up , their working outside so literally no overhead , get it!?
Cast iron block this size gets repaired the same way everywhere in the world. You either use powder in the oxy torch or solid material. Impressive job nonetheless with a part that big. One cold spot on the part and it is toast.
😅
Kudos to these guys, they do a whole lot with very little. Reminds of a fella I saw when I was deployed in Baghdad, he was milling aluminum heads with a belt sander set up on urethane skateboard wheels that rode on tracks. Necessity is truly the mother of invention.
Too Cool
Damnnn, brother. That's EXACTLY what I said! I even used the word "kudos"! My right hand to God! Great minds think alike.❤️
We didn’t have an X-ray machine for our heads at a shop I worked at in the early 90’s. An old guy from Texas showed me a way to find hairline cracks. He put desenex foot spray on it, the powder is so fine it finds the crack and settles in after about an hour. Then you either go with new or start welding if it’s feasible. The things you pick up over the years
@@skeezix8156you think machine shops have X-ray machines?
a lot with very little ?! damn this huge machines costs a fortune
Valve seat = +/- 2mm. That's gold!
just eye in the cutter adjustment
The valve guide seem to have same amount of slop. Will sure be great.
Lol!
I love the firepit probably made from all their previous repairs. They'll be back soon. 😂😂😂😂😂🔧🔧🔧
That was the bowl not the seat.
I love the precision measuring instruments these guys use. The electronics repair shop next door has a counter/timer calibrated in hours if you want precision, but if you want standard measurement, they use a calendar.
surely they did a little more so the valves seat correctly. I get hand adjusting the cut depth of the carbide tool until its touching the original valve seat, so long as the guide on the tool is stuffed into the valve stem hole to keep it aligned. Still, funny as hell.
Money is tight so precision is loose
Foo you couldn't do 0.01%🤏 of what they do, even if you had all the tech in the world 🚬😎
@@barrioscorona215 What's a foo????? Is that some kind of mommas basement talk?
@@chuckmiller5763 You wouldn't understand, it's a secret.
That valve cutter had more runout then Usain bolt
Maybe upgrade from a Homelite drill press to a Bridgeport end mill?
I don’t care what anyone says about these guys. They use the tools they have. They don’t live in a disposable economy. If only we in the west understood the true blessing of skills these gentlemen possess. It may not be to exact tolerances or specs. I bet that head stays on the road 10 years before they need another head repair. Simply amazing what ingenuity and fortitude these humans possess. If these guys were given opportunity tools and resources I bet they would be world leaders in innovation! Take note people this is what men look like, no excuses no safety gear no excuses just results!!!
No toes either...
NOPE! The valves leak as do the valve seals. Compression is also higher due to cutting the deck so much. I'm sure the fuel in that country is not that great. It'll work for a few months till the heat treatment kills the gaskets. You forget the metal that's used to repair is different...
People would not do this if it didn't work I was working with heavy equipment in Ukraine Befor the war... the bucket pin came out of one side on a 50 ton excavator Bent the bucket ram like a twig Anyway no spare ram and lots of work to do So we took it to a place veery much like that they cut the rod where it was still straight and heated it up till it was white hot with a blow torch then rod welded a new bit on the end turned it all smooth on the biggest laith I have ever seen put a thred on the end got the eye back on staked the thred and went back to work that excavator worked for another 2 years in solid rock until the boom split I left at that point but I know they took the boom to those guys for a repeat performance
Where are the steel toe sandals? 🤣
@@joshs.5623Getting it done is NOT getting it done right. A little savings and the could improve their facilities. Buuuuuuttttttttt, they don't. They CHOOSE to half ass it. Then these channels promote it as "surviving!!"
The amount of wobble in that locating rod was crazy. Its meant to slide in the valve guide and hold that cutter so as to not let it walk while cutting the valve seat. The whole crack being repaired required it to create a solid area that use to be hollow to allow for coolant or oil passages. The rocker studs that were turned red hot are not just noodles. But I was entertained and that is all that matters.
It was only roughed out. There were no seat inserts just roughed out seats.
the serdi wobbles then centres and the air bed locks up a good slap with a size 12 flip flop will secure the inserts
@@ThePaulv12 If it was just roughed out why did the guy ream those valve guides?
@BadLanz86 Just to make sure the holes were straight and clear of debris would be my guess.
@@ThePaulv12 ….So they’re not gonna replace the valve guides
Automotive industry is based on extremely precise engineering. Believe me I'm no engineer but the way these guys are "mending" the cylinder heads is mind blowing.I live here in Pakistan and these guys repair the engines which run all the buses which we ride and our safety depends on the skills and the shabby equipment of these machinist and welders.I wonder if they have had any education in automotive engineering because these skills are passed on from one generation to next without any textbook knowledge
I'm fascinated by this as well. Their creativity is so high. Reminds me of the time when car mechanics in the US would simply make their own engines
Either fix and have a bus or don't fix and have no bus. Even in North America people used to repair things like this. Now we have forgotten and just throw it away.
Love it...necessity is the mother of invention...it may look madness to most but when you need to repair an expensive item you cannot afford or wait weeks/months you'll be surprised at what you can achieve...I've worked on heavy earthmoving equipment in a few countries of the world where there is no chance of getting replacement parts you just have to make and mend...👍👍
it's the most eco-friendly grill I've ever seen in my life, Greta is happy... :)
😂😂😂
How dare you!
@@ProctorSilex XD
Except to Andrew Tate ha ha
You're kidding, there's half a rainforest there.
I am a poor farmer I have a 1982 f150 4x4 4.9l 300 straight six. Had a crack in the head. I ground it down welded it back up hand lapped the vavles and went to machine shop had it flattened and pressure checked. My buddy charged me 60.00 to do it for me at the machine shop. I have been driving with that head since 1994! Runs strong never had any issues since!
Amazing!
your ford gas engine has no where near the compreesion ratio that a diesel has and the pressures in this cobmustion chamber are way beyond that found in your truck
its also not a 15:1 compression diesel with a turbo blowing in 14psi of boost and under heavy load factor on a heavy machine..........
@@wazza33racer have a old 3208 cat motor has a crack in the block. I ground a v and drilled a very small hole to stop the crack. Welded the block up. Hasn't leaked since. I haul heay equipment and logs with it daily. It's slow and low geared with all that wieght and I love in mountain terrain. So being floored in low gear to keep it moving 30-50,000lbs plus equipment trailer yeah it holds well! I'm the type of guy who relined my old clutch I've done brake shoes that way and yes my vehicles are older but very well maintained. Although Studebaker has been long out of business this old exmilitary truck I put the cat motor in to be able to use it love the full time 6 wheel drive. Goes anywhere. About the size of a dunce n half.
@@magneticpulseengine3605 if the weld is complete and all the way and re machined to factory spec. While not traditional in a throw away and buy a new one society you live in. Lol it does work effectively
The amount of times he used that compass to check the tolerances, it was almost like he was praying for metal to grow back to make it a perfect circle again. lol
Allah is powerful, he works in mysterious ways
Obviously these guys know what they’re doing. Imagine how good their work would be if they had a decent shop to work in with modern tools.
Yup, they would be completely lost!!
PSA this is tig welding of the 50’s , and just think in 5 or 10 years the United States of America will be doing this very practice if things keep going the way they are..
And we’re worried about dropping a valve, these poor guys are worried about a pound of weld dropping down on the piston., note the amount of spare heads they have to build fire pits…
That valve seat cutter is so bent I can’t believe these guys could not do better with a hammer…
Just your normal compression release valve seats being installed… 😂 😂
These guys are good for a 100,000 mile warranty, no problems.
“Yes, we offer lifetime warranty” but it will be very difficult to find us after this life 😂😂
when it stops again, it's dead, and warranty no longer applies.
Warranty ceases if the engine is started....
Warranty to the doorstep, but there is no doorstep, only dirt and sandals.
They offer the "outta sight guarantee" As soon as you're out of sight, guarantee is over...
На самом деле хоть все и примитивно, но технология ремонта соблюдена, кто учился в профильном вузе тот поймет
I've only seen such talented welders and mechanics in one place. It's called The shop. An old Harley shop in Ventura. My 1952 panhead had a crack in the cam case everyone else told me made it garbage. They repaired it with the same kind of skills and that old panhead still runs fine. Thank you huggy
Wow, so it was Huggy Bear from Starsky & Hutch who repaired your engine? He must've sold his bar and bought a repair shop later on.
@@HighlanderNorth1 oddly, yes and no
@@HighlanderNorth1 Staircase and Clutch...lol
a crack in the cam is not nearly what those guys were repairing on the sidewalk. lol Huggybear!
Very talented mechanics ! With minimum tools tey made a great work, RESPECT !
Can say they come from a great lineage. ;P That area of the world had crucible steel 1000 years before europe -
😂
I watched a mechanic weld an engine cylinder with a torch and coat hanger. He preheated it on a bbq pit. Put the engine in his wrecker and used it for years. That was in the mid 80’s. I ran into his son and he said it ran like a champ until 99-00.
Coat hanger is probably better metal than most heads 😂
5 minutes into the video I keep pausing it trying to wrap my head around HOW are they going to pull this off 😂 these videos are just amazing, the skill those guys have. I just love this channel. In Europe a repair shop would never touch this. They would tell the customer it cant be repaired. You have to throw it away and buy a new part.
same iN USA
The new part you'd be buying would probably be this "remanufactured" head.
Where labor costs are high it makes sense to not try to repair something this damaged. Where labor costs are low and parts are hard to find it makes sense to try and salvage it.
The shit you can do when you don't have to meet emissions standards.
Yeah. Cuz they won't waste their time... this head will won't survive 5 miles.
Yes, used to do this work 40 years ago in a Kansas City weld shop. We used natural gas, fire bricks, asbestos and later, kao wool insulation. That is straight cast iron rod with probably ferro flux. I'm sure there are still shops around the country here in the US that do this type of work.
Amazing work
Sounds pretty rad
Especially rare or vintage cylinder heads
Yeah, That's "old school" just like the Stuff I learned many years ago, here in Australia.
@@scottcarr3264 That's right. It is hot dirty work, but when you do it right, it is the most solid and leak proof way to repair that area of the cylinder head. If you are repairing an area adjacent to a water jacket, I would then use low fuming bronze; much better flowing and all around an easier process.
I wish I had hard workers like that at my shop . At my shop people are more concerned about their cell phones than the work they are there to perform. Sad generation we live in .
I worked with this former English Air Force Technician who had incredible welding skill knowledge and seen him repair anything placed in front of him, stuff like this, amazing workmanship.
I remember repairing a cracked Land-rover cylinder head using self tapping screws. Drill a hole just past the crack, screw in a self tapper and cut flush. Drill the next hole half into the first (along the crack) and fit another screw. Rinse and repeat until past the crack. Face the head and refit. It lasted for at least 10 years before we lost track of it. Later on I came across a commercial repair kit which used a similar method, I think it was called Metalock Metal Stitching
They fixed a cracked boiler at our local steam train (metal stitching) , I think 1990s. kzhead.info/sun/pqyed6inhIJrdqc/bejne.html
@@scudosmyth784 Sadly I'm an old fart and my experience of this process came from the early to mid 1970s.
@@fanman4230 yep stitch pins that’s the proper way to repair a valve seat
That’s called cold stitching
Agreed 👏
Good news! We fixed the cracks. Also bad news. We destroyed the entire head in the process.
15:24 yeah you can see it
Oh really? At the end this head look`s not that bad. But I want to see You in action with a blow torch doing the same job as them guys.
@@pawelwis7215 Why does someone have to do the same bad work for you to accept that the head is scrap? Sit down. It's scrap.
@@RollingRoadEFI Maybe You did not noticed but them guys are at least 50 years behind us so they do what they can do. For our standards it`s a scrap but for them it will work fine.
@@pawelwis7215 Fifty years? That only gets you back to 1972. Take away the electric tools, and you've got blacksmithing in the early 1800's.
It amazes me how much some people are capable of doing with so little. Those bent bits killed me, this is too good. These people need a site where donations can be sent so they can atleast get some new bits.
I'm not even sure it was just the bits, it looked like the whole spindle was out.. funny as hell though... lol
We did this in Hollywood, Florida in the 1970's. I was the helper for the welder. I ground out the cracks, pulled all the valve seats and set it up in a firebrick oven with asbestos covering the top. We used a big propane torch to heat up the head and when it was ready Lucky would go in with an oxy/acetylene torch, a cast iron rod and flux and weld it up. After cool down it would take me several hours just sandblasting the scale off in preparation for machining. I don't know if anybody still does that in the states though.
That machine drill had some serious wobble but i love how they improvise 🤣
They double checked it with those calipers, just comparing from valve to valve the same degree of oval Ness
They even got John Belushi to to the grinding work.
Drill table had counter wobble so it's ok
A little loss in compression never kill anyone 😂
@@dave_in_florida 25:58 glad the fat guy took over else it wouldn't have been so precise...😂
I love these charcoal fires in Asian repair movies. Gives lots of atmosphere. And talking about precision: you can always try better in your next life, or in the next life of the chap who relied on your repair.
necessity is the mother of all invention. amazing what these guys can do with so little...
i did a bently head like this years ago , had frost damage used a section out a cast bathtub ,if you coat the gasket face with a mix of chalk powder and oil , graphite and oil or the white developer spray for dye pen kits it does not scale preheat is around 900c dull red and must be covered up and cooled as slow as possible i followed instruction from an old 1920s gas welding manual and the job was a total sucess and saved £6k i used a no 25 nozzle and sif square rods 6mm and sifcast flux still available from sif it can be arc welded too at dull red with 7018 and has no stress when cooled slow i welded some very fragile exhaust manifolds like this a lot better than the snake oil rods its the weld shrinking fast due to the preheat being insuffient that causes cracking
You can't even spell Bentley
@@RollingRoadEFI no but i can weld unlike you septic tanks
@@eweunkettles8207 LOL nice random assumption. Emotional maturity of a 13 year old schoolgirl.
sook my boaby
Interesting to know although I doubt I'll be doing anything like it anytime (but, never say never)
Gosh you guys are adventurous and clever. Thanks for posting, very interesting.
Amazing work. Thanks for sharing 🙏
18:05 Two men can lift the head. 21:29 Two men can carry the head and lift it onto a mill. 26:09 Two men lift it off the mill to move it to the fly cutting mill. 26:50 Two men cannot lift the head. I think the dude in the sandals with the hoist is the brightest bulb in the bunch. He'll still have a strong back when he's 40 even if he doesn't have any toes left.
Pffffttt… doze were steel-strapped flip-flops. OSHA ignored…
GOLD.....
blahhaaaaaa thats good buddy im rolling here blahaaaaaaa ya got it
simple, the surface grinder is a pricision machine and you dont drop anything on to the bed ever. but you also should consider with each sucsessful operation the parts value goes up.
25:40 Remember kids, if you cut first and measure second you can always round the number off to being within tolerances you never check.
Oh never mind, quality control came in a second later to check inside diameters, comparing one hogged out cylinder with a cylinder that was recently given a layer of forge scale from the 55 gallon barrel of homemade charcoal they used.
They do the best with what they have. Amazing work !!!! Hope the motor runs more than few hours. Still, very impressive..👍👍👍
It will be fine , The next guy doing the valve work will bring it to spec's...This was just block repair.
Heat treatment is paramount to a cast iron repair. Very good workmanship. 👍
The big shot gets a table and chair ! Very poor conditions these workers must endure... Much respect!!
I am surprised they didn’t put it on a lathe
😂
Лучше б они его на токарном сделали.
Always great to see that they always put safety first.
I was glad to see two guys wearing a mask to keep Covid away
This was the first time I saw closed shoes
Amazing - Well done - Great repair !
Damn good work for what they have. Incredible determination.
These guys are highly skilled. They make up for a lack of precision equipment with years of experience and thorough knowledge of their craft.
That is a-maz-ing. It isn't something from nothing, but it is a terrific result from a fantastic effort in very challenging circumstances.
I m from poland in my country nobody can t repair head from cat c12, in pakistan it s possible good work i love repairs from pakistan
Awesome skills from start to finish, sure be nice to see the final assembly
And see the engine start up. Curious what the overall price for repair be.
I would like to see the rest of the repair. The valve guides and valve seats, because the valve guides looked way oversize and out of round. Maybe it goes to a machine shop next. Cheers.
Me to. I think they reemed out the old guides to take the shank of the cutter then will replace the guides later when the seats are done. Bit that confuses me is the wobble in the cutter. Why?
@@bigteddy66 It's to take up the wear in the miller bearings, so the loose head centralises under the cutter... Next question..
@@hiscifi2986 oh well... There's no need to be so rude... Next..
I hope so.
Submarines are welded in a similar way . Outer hull is heated until the welding introduces no stress. Then a patch can be welded in without introducing stress arias and make the whole thing equally strong
It's about the Heat Affected Zone (HAZ) I've thankfully never needed to use all the knowledge I got from trade school as I'm no welder but the tutor was a welding engineer so we all got an in-depth course of the theory involved 🥸
I saw the same kind of work done in Korea when I worked there in the 70s. It is amazing what these folks can do!
I gotta say that’s a fine job you guys did there with skills like this I’m confident you could repair anything… Well done 👏
Astounding, now assemble the engine , show us the amazing repair in action.
Would like to see the next video when it runs??
These guys are top tier- you can tell by the way they have actual shoes.
the more I see of these Indian guys and some of these restoration videos the more respect I have for the way they do things.
these people amaze me with the repairs they make and the pieces they make from scratch,very clever folks indeed
Amazing what they can do with the tools available. I would love to see the compression numbers as there is no way they are not losing compression through those values..... Great video, thank you!
The Valve seats haven't been fitted yet, and they will be cut perpendicular to the valve so they seal, all they cut was the rough port shape out of all the excess weld which is non-critical on such an agricultural engine as the gas flow is already shite.
Serious skills These guys will be in high demand after the apocalypse.
Congratulations you are the real engineers you alie the experience with the fundamentals of metallurgy the previous eat up reveals you know what you are doing
These guys are very clever and the work they do is outstanding. Repairs they are doing today are clever and believe it or not such types of repairs were accomplished in most garages and workshops around the world as a matter of having to because of the massive cost if done professionally and of course in the West professional repair shops capable of doing "Guaranteed" work were few and far between prior to the 50's and 60's, and of course if your repair failed you either got sued or run through the courts until it broke the bank. Here these guys are not threatened by Insurance companies or threatened by Court action and I would guess that these repairs are not long- term and there are rather regular re-does which I guess they happily do.
This was the function of a place in Adelaide, South Australia that I worked at about 60 years ago. We would repair heads and blocks from any thing from Vesper Scooters to Train engines. It was a proper workshop, with all the right equipment.
Yeah...a "proper workshop" requires lots n' lots of $$. These guys probably do it at 1/10th the cost. 😄
No it was done in a similar function as is being shown, and probably for a similar cost, the preheat function we used was a bit more developed. The end job was as good as a new product.
Amazing work, wow, what a fabulous skill these guys have got, who would have thought that such a wonderful repair could be carried out and probably save the Cat owners a whole mint of money, or even having to scrap the engine. So very well done guys, !
Why so many negative comments? People need to reapect the skill, geniius and dedication in far less than ideal conditions. As for the compression being up to standard, and final details of polishing, obviously that stage has been omitted, but it would have been great to see it running.😊
I fact yes I've seen a similar job on an aluminium head of a Sunbeam Stiletto in the eighties in the Netherlands, the head turned out fine, good job ! 👍😀
I wouldn't have thought of simply leaving the iron in the charcoal until it burns out; the ash would be a good insulator to ensure the iron cools slowly. 'Very cool watching people make repairs like this under adverse conditions (tired tooling, etc). I suspect that Gru would approve...
I'd love to be the guy being paid to just wait until the charcoal burns out. 😁
He was up all night and is paid less
This is also how we repair Jet engine blades in the Bayou.......Works great!
🤣
i repaired turbine blades in a purge chamber in scotland for a yank company id rather work with the indians ! the yanks were all Cowboys !
@@eweunkettles8207 Interesting that those "cowboys" are who built the entire aircraft industry, Boeing, McDonald Douglas, Lockheed Martin, which used to be the only people to talk to if you needed a proven technology, reliable and tested.
ça c'est de la mécanique ! bravo et grand respect
These guys are some kind of talent - Great skills.
I'm no machinist, but the runout on that machine looked a bit alarming. Amazing what these guys do, though, with the tools they have.
It’s amazing here in the US that head would have been scrapped and replaced with a new or used one. Would I trust that head in a very high compression, high pressure large diesel no probably not. They did a great job and with minimal machine tools they did everything right, they did a blacksmithing process to replace the metal that was cut out with the cracks they got it red hot and fused new metal. If they didn’t heat the head to high temperatures the new metal wouldn’t fuse properly be weak and fail.
If they would use all these efforts to make new engines they would be far better off. Those are industrious and diligent people
I am a machinist and I agree, the run out was hard to watch. But. After watching it I realised the head itself was not clamped to the work table when he was cutting the valve seats. That then negates the worry of the wobbly tool piece, because the head was moving around all over the place. The tool guide was doing as it should, guiding the tool piece, and the head was moving around with the wobble of the machine. Hard to watch from a perfectionist point of view but I believe it was all working as it should
@@steve-ph9ygзачем обжигать на костре головку двигателя?
Think those were coolant jackets that were oxy-welded closed in those cracks….
Is it my eye but they filled in the cooling jacket on the repair ? also the pilot bit was a bit out of round ....what are the tolerances ?+ or - a inch lol!!
Cool video! I was hoping to see it running!
It never ceases to amaze me the ingenuity from some countries.
Особенно понравился мангал из головок!!!
Could you imagine if they had access to newer equipment and steel toe shoes.
Hahaha agreed 👍
They'd probably kick it back into shape!
Shoes wouldn't last long. They'd be used to repair something else.
Amazing skills. Just imagine how much more they can do if they had work benches and even shoes.
Not going to lie, never seen a repair like that before. I imagine we'll see it back next week for more of the same.
Strangely enough I have seen head repairs done similar to this with different heat sources not coal and it can be done successfully I used to know a guy that could weld up cracked aluminum cylinder heads back when they were first coming out with those and having so many problems. it was a long slow heating process then do the repair and then wrap it up in insulated blankets and let it cool for about two days are used to think that many blankets would be overkill but you would end up with a cylinder head wrapped in about 2 foot of insulation to make it cool slowly The guy had a very high rate of success doing that
no
You know this shop is safety conscience because they wear closed toe sneakers vs sandals … but seriously amazing that any of this works and the ingenuity to rework stuff when that is what they have to work with…probably no supply chain interruptions ….
Except the guy at the fly cutting mill, but he's the smart one with the hoist not destroying his back.
Целая индустрия кустарного восстановления двигателей! Молодцы мужчины!
After the apocalypse , everyone will be looking for guys like THIS to help rebuild .
Damn! I waited until the end but they didn't show the fitment of the oval shaped valves :)
Зачем шлифовать головку которую только выкидывать, после всех предыдущих манипуляций, остаётся?
рубашку охлаждения заварили. 🤣😂😂
Can’t watch anymore. 🤦♂️
Да ты что! Еще ездить будут... они же до ремонта как то передвигались 😂😂😂 а тут два дня точно воду выбрасывать не будет..👌😂
Когда седла клапанам начали разворачивать я офигел от точности! 😁
@@VladimirPereslavtsev ещё год войны и ты так будешь, голосуй за путина
Молодцы мужики, перед вами снимаю шляпу, такую работу проделать не каждый сможет. Браво!!!
Good on these guy's , now the valves will get bedded in with a twirly rubber sucker cup. they do things the old way and it works, watching these guys has made me realise I worry too much working on my old four cylinder VW van. from now on I'm going to get my drill press out and my files and sandpaper and concentrate on doing, and less on worrying about a few millimetre.
this is unbelievable......😇 they are doing a great job
Just a note to the Bob Villas out there that think Muggyweld, Stainless or NiRod with no proper prepheat is the way to weld Cast Iron. - What you just saw is the ONLY way to WELD cast iron. If you look you will find it produced an undetectable repair. - Actually re-cast the iron in the broken places. Any other way is just to camouflage the damage. - Oxy Fuel with real cast iron rod is the only way.,,,,and other then a programmable oven charcoal is the only way to pre and post heat the part. - Just cover it in burning charcoal when you are done and let the fire go out over night (or more) and leave it there until it's cool enough to pick up in your bare hands. On the other hand,,,,in the US to make that repair the welding alone would cost more then a complete new loaded head, if you could still find someone with the skill to do it,,,,But just because we would scrap it over here doesn't mean they didn't properly repair it over there.
It reminded me of something out of a blacksmithing manual.
В центре головки (3 или 4 цилиндр) забыли просверлить и нарезать резьбу под свечу, а так норм. Если что то на 5-ти цилиндрах работать будет
It only needs the candle to start in cold conditions. This is a compression ignition engine. It does not require a candle.
Да судя по изначальному состоянию они на двух цилиндрах пылесосили... видать барбухайка совсем перестала двигатся.. вот и ремонт пришлось делать
Это специально сделали, чтобы новые трещины не образовались)
Там тепло, оно и без свечей заведётся. Тем более часть осталось
Форсунку.
Videos like this is a great comfort to me. Because then I know, that even if civilization collapse, most of us dies and cannibal militias take over for a while, then, still, humanity will rise again, somehow, somewhere.
Congratulations, you just made a giant paperweight.
I like the method the young people learn. this is a public job and any person can learn how to make real life.
Think that pillar drill could use some recalibration but great to watch, these guys obviously know their stuff 👍👏.
The wobble on the valve guide lol
Yes, this is a salvage process to try to save an expensive head that is no longer in production such as these D343 heads. I was a Cat factory Service Rep in the San Diego area years ago and fought with a local repair welding shop there who was spray welding heads and blocks and claimed to have a "like new" product when done! We never allowed the dealer to use those repaired heads on a warrantable failure as we had to stand on their quality. Oftentimes the welded product did appear to be as good as a new product but paint can hide a lot of variations!! Buyer beware!!
There are many reasons why I wouldn't allow any "repaired parts" come into my shop. It's not a matter of if, but when they fail, they will cause a lot more damage than the hole unit is worth brand new. However, it is understandable when you actually think about what you're seeing. All of these videos that show assentully scrap parts being "repaired" are done in locations where everybody is very poor. These parts belong to a very old piece of equipment and are no longer in production. The few used parts are still in existence are expensive because they are no longer in production, and the owners know they can get a high price because of that. They can not afford that and definitely can't afford to buy another machine.
They still make new d343 heads
Awesome video Great work !
30/12 22 They have a Plough Grinder - ideally need to aquire a Jig Borer or Jig Grinder, or Universal Milling M/C. Blocked cooling passages ensures continued repair work. Were those smaller blocks used to surround the furnace ready to offer an exchange system ? What other services do they offer ?
For sure that added material is not hollow anymore as it was before for cooling reasons... Very high precision tools and labor...
It's like the beginning of the industrial revolution over there. Cool to see what industrious people can do with so little, (the surface grinding machines are no joke though. Every die shop in the USA has them), but also sad because I know they can be just as advanced as anybody else on the planet if the world was governed like the original USA, where the real industrial revolution started.
It looks great. My only two questions are 1) it looks like they filled the water jacket passages. That might make this crack again quickly, and 2) I didn’t see them drill the new bolt hole they filled!
These guys don't care. These machines run with no radiators anyway
Those guys are great! Their head jobs are the best!
How to distinguish an amateur from a professional? A professional knows what he screwed up. Maybe a period workshop. He may not have a laser measurement, but he knows how to use the available tools correctly and do a great job! It's a pity that the video has no commentary. It's monotonous to watch, but it's a great job in an old-timey style. I admire!
Checking the tolerances with a compass! 🤣
They were Inside Callipers I learnt my trade with Hand tools. I could feel out of round to 1 1/2 thou with callipers.
That guy has probably been doing that kind of work for so long he can just eyeball it. Skills.
don't forget there must have been a measuring tape in there somewhere
32:22 looks good except I'm just a little wary of the 3rd from the bottom ports
I guess there gonna go through the whole process again.