If your gun is no longer grouping once you add a suppressor, don't worry! POI shift and other changes are normal, and we'll cover some troubleshooting and how to fix them. Also note that not all of the changes are bad! We'll go over some of the good changes, too.
Visit www.silencercentral.com for more info.
Ayyyy, I know Parker! Good dude, hooked me up with a Banish 30 and 45. They're in ATF jail right now, but he set me up with a solid payment plan that worked for me to get both cans.
My Banish 45 is phenomenal! A new thread pitch piston was all it took to make it work fabulous for my rimfire, the Tikka I’m using is now quieter than clapping hands. Just stunning how well it works!
Good information!
My lwrc repr was all over the place with a 30 cal titanium silencer. Took it off and it’s grouping 1moa a or better. I should check bore alignment sometime.
Can someone tell me more about the stock on the rifle to the right?
Here is a selling point that you did not point out. I Believe the Banish is cleanable. A suppressor that is not cleanable gains weight a lot faster than most people will tell you. As it gains weight that effects the harmonics as you pointed out. Plus the added weight will start effecting the point of impact. Even at the shorter pistol distances 1200yds and closer you will be chasing it a lot sooner than you think. Even at the longer pistol distances 2200yds and farther with a non cleanable suppressor you may be back at the bench tuning sooner than you will like. My next suppressor will be most likely a Banish 45. My buddy got one and to say the least I am envious. NDR
Correct! Most of the Banish lineup is user-serviceable.
If your the rifle was shooting MOA and that changed after you add a suppressor it not's the gun. Maybe not the same impact on target but group should be real close.
Will my silencer add to the barrel length. For example I have a 12 inch barrel when I put it on will add to the barrel length so I can put in a fore grip
No, that’s not how barrel measurements work. You can put an angled foregrip in majority of states on a pistol but vertical requires an SBR stamp, a suppressors length doesn’t change that criteria.
My group was 3 in at 100 yards without suppressor. With suppressor more than 12, 6.5 creed, I have to go back to school
Been waiting 11 months and still no approval paperwork submitted back from ATF. I was told it would be 6 -9 months wait time.
Contact your local senate representative to get in contact with the ATF about your form 4.
@@elijahisrael86 how long did it take to get to you though?
@@elijahisrael86 i am 5 months in on my wait for a banish 30 so i hope i have your luck instead the 11 month wait guy above
Be patient took me 473 days start to finish
@@wally3641 I actually got approved in six months. ATF failed to send the approval to S. CENTRAL.