Shooting The Worlds LONGEST Silencers!!! But Do They Work???
2022 ж. 31 Қаз.
7 200 072 Рет қаралды
Sickest long sleeve we have ever made! www.bunkerbranding.com/produc...
Watch me vlog. / offtheranch
/ demolitionranch
/ drdemolitionmatt
"Club Diver" by Kevin MacLeod from incompetech.com.
Outro music by MDK, • ♪ MDK - Dream Eater (N...
Not only is it quiet, it's also very hard to miss your target when the end of the barrel is mere inches away from it!
Definitely one of the best comments here
Your comment is at 69 likes. I must not change that. But it's a very funny comment!
But is that the "end of the barrel" tho aka the muzzle or is it a long way from it
He bout to hit them point blank 😂😂
🤣🤣
There is no war in bah sing se.
🤣🤣🤣🤣
Nah they will see the suppressor!
The sound is enough to blow their ear drums out
I've found using some lube on my erector makes them go in easier with a lot less effort and noise.
gotta carry it around with the suppressor(s) on the barrel lol
Remember, with the Erector 69 you need to make sure you have permits for multiple States because the moment you point that thing you will probably cross multiple Borders. If after shooting no bullet exits the barrel, it does not necessarily mean a misfire, do not watch down the barrel remember that it takes the Bullet some time before it reaches the end of the barrel (a bullet only travels at around the speed of sound after all). Sometime a bullet might not come out at all since it probably gets lost on the way!
Erector 69 sounds weird
"A bullet only travels at the speed of sound" isn't the speed of sound on the slower side for bullet travel speed? Please inform me.
I hate when my bullet gets lost while traveling. It must have missed that left at Albuquerque.
@@EdyAlbertoMSGT3 I think you missed the point of the joke....
@@Dkgow yeah, it was supposed to go strait past Albuquerque. if its making a left, you got a bigger problem, which would be baffling to see.
I love the thought that you avoid detection with super silent shots, then instantly give away your position when you unscrew the suppressor. Squeeeeeek.
The giggling also probably wouldn't help.
The subtitles said it was music lol
The irony of a suppressor being almost silent but enemies hearing you attach it from half a mile away.
That Was the most cringe asmr, but damn it sho did hit the target more the more squawks there were.
That noise...
@@FaTDawG604 you mean like nails on a chalkboard?
Well, the good news there is that it probably won't matter if he misses his shots, because they'll probably already be dead from the super-intense grinding of their teeth.
@@Davelon420 I didn't realize noises coming from a KZhead video could have that effect on me, definitely not the video I should have watched to wind down before bed... I do honestly appreciate the fact that he was fully aware of that but did it anyways 🤣.
Matt, a man of culture, delivering on his people's wishes!
His face every time he said 69. 🤣
Been waiting for this one
A man of culture and a man of Science. God bless the demolitia
What in the long noses?
Incorrect, this was my idea before it was his, great men do think alike that being that, you are all peasants
Took an unintentional break from your videos, 1 year later, its still like the first time i saw you. Magical.
This is by far the episode that made me laugh the hardest since I started watching 5 years ago, squeaky screwing and all. Thanks, Matt!
Should have had a decibel meter to compare noise levels as each section was added!
That would've been super interesting, especially since the quality of "loud" or "quiet" definitely doesn't translate to KZhead video in a way that the viewer can quantify.
@@NickC_222 Your vernacular vocabulary voraciously verifies villainesque vaudeville vocation.
@@albumreviews11 nice alliteration
@@pupil5763 ❤️
"Do you hear that? The enemy appear to be using old-fashioned typewriters over in the trees"
If you permanently attach enough of those sections to bring the barrel up to 16" you don't have to worry about the ATF's new pistol brace rule and you can just put a stock on it
Pin and weld it 😅
Well with the way things are going in court right now, you probably won't ever have to worry about their new "rule". They've been getting their a$$es handed to them in court for months now on pretty much every case people bring against them 🤣
There's a reason ATF don’t try to fuck with lawyers
Good idea. So you're STILL filling out ATF forms for the silencer and then waiting a year or two instead of the like 30 days to get a form 1 done for an SBR. You showed em.
@@TheBeeFactory I mean... you're right, but you didn't have to say it man D: Plus, you then get to say you have an integrally suppressed whatever... then your baffles wear out and you have to commit a potential felony to fix it by removing and then replacing the expensive part of the toob.
I kept hoping Matt would prop-up the suppressors, level them (perhaps with a tripod or something), and see how accurate and quiet they could be manipulated to shoot.
The awkward silences and smiles are the cherry on top. Good shit.
Impressive that you can miss with the barrel physically touching the target.
CSGO style
Love the vid
Classic Matt, never zeroes his muzzle device before a video.
in pvp, i miss and my barrels are pushing into the enemy's skins
@@keikenxfe2proalt434 XCOM style
If you rested the supressor on a flat surface (like a long table) it should eliminate the curve in the suppressor.
Yea but it would probably still have accuracy issues.. Having the barrel (or suppressor attached to the barrel) rest of anything throws off the point of impact. That's why all rifles now days have free float barrels.
That's what she said 😅
yes I thought of that to, a compensator for the droop, a straightener.
@@JohnDoe-qz1ql an erection support sleeve, if you will😏
@@A.F.1 How about no, god why is my text like this
Those segments do a pretty good job at suppressing the pops. Thanks for sharing, Matt. The only negative thing to that system is that ear-splitting/fingernails-raking-across-a-chalkboard screechy sound that happens when the segments screw together. A bit of pre-lubing of the segment's threads should be fine at silencing that noise during the suppressor's screwing-together process.
I love how Matt is always smiling, always makes me smile!
5ft of suppressor finally gets you the quiet levels that the movies try to make you believe they give you!
subsonic, that is.
@@acctsys yeah any decent suppressor running subsonic rounds is going to be ridiculously quiet, still hard to match the movie quietness tho unless you’re shooting a silenced 22/22lr with subsonic rounds
Z
Not even close! Movie suppressor sounds are retarted quiet. Im surprised this 5 footer is actually as loud as a normal sized suppressor😅
I’m baffled by how quiet it was!
The good thing about this suppressor is that you can't miss. It's so long that it's practically in the enemy's face. Quiet _and_ accurate!
A Hitman’s dream!
"whats this hollow rebar doing here??"
Why use a laser when you can have a 10 ft suppressor?
bro is Whistlin Diesel but with guns
I love the eye contact with the squeaking. You had me laughing, so freaking hard.
I personally would of liked to have seen a Db meter to see the diminishing returns on using a smaller one vs a longer one. Great VId Matt!
Scam bot response aside,...jeeze I hate those things, I think that's an excellent idea. Matt should definitely revisit this,....for science you know........and maybe a few more dick jokes.
Coming to Demo Ranch expecting scientific data AHAHAHAHAHAHAHAHA
And a crono to see if the speed of the bullet is affected.
the Db meter might not make it super clear though, since the logarithmic math behind Db measurements means you'd need to do a whoooole lotta math to really see the data clearly.
@@soulis1000 Yup, I'd like to see that also
You should have gotten a decibel reader to see if the additional suppressors actually made it even quieter
you can hear it get quieter for sure, but it would’ve been dope to see by how much
My guess is that any of the suppressors that were getting hot/warm were still having an effect (and slowing/dissipating the gases) but anything past that didn't. Also, I think it would have been interesting to have done a supersonic vs subsonic comparison at each of the different lengths (though given he wasn't even sure if it would work, I can get why he didn't).
That’s exactly what I was thinking
@@hkfifty871 At a certain point, the muzzle blast would be completely suppressed, and all you'd hear is the action
Even with a BUNCH of suppressors, there’s probably some upper bound on how much decibel reduction you can obtain, and I doubt it would be enough to totally suppress the muzzle blast. Though I’d certainly love to see someone try.
I don’t know what’s better, coming around the tree and and only seeing a suppressor that keeps coming, or you blowing the smoke off the end. All stupid and glorious, it brought a tear to my eye
Came back to watch this again. 2:35 is just... spectacular.
I love how Matt always says “Place your bets in the comments below!” like he expects us to do it, but no one ever does. Matt, this is for you. I bet that the suppressor doesn’t break.
Yknow what? I'll bet against you I bet it does break
I can confirm that one of you is right
Hmm. I'll bet it doesn't break either. Maybe if it droops it might but I bet it won't break.
Thanks Matt, for listening to Matt.
I think most ppl know that creators ask for comments to boost the video in the algorithms. Kind of like when they put those stupid text things on screen for half a second , ppl then rewind a bunch of times and pause = higher video retention = boosted stats for the algo = higher views.
12:35 Imagine you're behind enemy lines, its all quiet, the enemy is waiting for you to make noise, and you had to put on your suppressors that sound like that lol
If you're going for an armed raid behind enemy lines without any sort of gun oil to slather on your squeaky suppressor or your gun, you were probably asking for trouble anyways :P
Its going to take 30 mins to get the gun into postition and youre going to be seen anyway. Imagine breaching and you traverse a corner. The baffle is going to get around 30 mins before you. Its like a yo momma joke.
@@timothychapman2840 ok but imagine the hilarity from the enemy POV. you see a suppressor start to pass by and prepare to fire, and it just keeps going for 5 ft before you eventually see the actual firearm and user xD
Oh my God your so right bra
Enemy: “Dafuq are they doing” *and witnessing a suppressor, rising
15:08 "don't look away from me" had me dieing
This was the most hilarious of your videos I've seen!! 🤣🤣🤣
That beginning setup just so you can use "glockamole" was a thing of pure beauty
I was not expecting that, I was watching and then afterwards, I had to take a double-take because I missed the "Glockamole", when I realised, I could not believe the epic event I was witnessing
@@AtomBomb420 same
I think Matt was 'baked' when he made that joke.
@@joecopeland4380 if matt was or not wither way still funny
The fact that everyone on the set was laughing is priceless 😂
He couldn't stop screwing his erection.
I mean there were 2 people on set but I get what you're saying
It always is; they all have a great sense of humor! 🤪 👍 😝
@@RozKounelakion if he could read he'd be very upset with your comment
I might have worn out my volume buttons turning it up and down every time he screwed on the 9mm 🤣
The ending, the last few seconds..you got me lmao
The ending is absolutely hilarious 😂😂😂
It's so efficient, it actually absorbs ambient sounds.
the strongest shape ever
Active Noise Cancelling
@@benjamericana1088 LOL
If you load up the first couple of cartridges in each magazine with the little blue pills (Viagra) replacing the normal bullets it will fix your drooping problem. Just be aware that continuing to shoot it for periods longer than 4 hours may pose a serious risk and you should consult a Gunsmith.
Solid joke lol
@@alexandersadventuresoutdoo6393 thanks.
Thank you James Buckley. Very Cool
Funnier than it needed to be
Blue tips?
the boyyoing you did was on points i laughed so hard keep up the great work on these 🔥videos
12:46 the funniest thing matt has done in a long time😂😂😂
I saw this suggestion in a previous video and I thought “man I hope he tries that”. Matt never disappoints
Same I wished too
This is the Demolition Ranch I miss, the crazy experiments and shotgun craziness.
Agreed. Need more creative craziness like this!
agree. it seems to all be "look at this EXPENSIVE new thing I got, ft ANOTHER GUEST!" these days. I miss this type of content
ok....long time watcher, moderate commenter.... but this is AWESOME!!!!!! i really want this product, especially the 9mm lol. Matt.....dude.....your inability to keep this Pg-13 makes it even more freaking hilarious!!! keep up the good work. I hope youtube is compensating you generously for all this content. I love you
I think it would have been interesting if you had a decibel meter as you fired through each new section to see if each baffle reduced the sound and by how much.
I think the reason you only got the baffle strike while holding it is cause when it was tied down, the barrel wasn't swaying. However, when you held it, natural slight bodily movements happened causing the suppressor to sway while the bullet was shooting causing the baffle to get struck. This would actually be a pretty cool idea to completely silence a .50 bmg if you had supports to keep the suppressor from swaying.
Can you get subsonic.05 cal bmg bullets?
@@glenecollins There's little to no options for subsonic 12.7x99 really other than "50 Thumper" rounds that I've seen, they're supposed to shoot at 1050 FPS. Good luck finding any though lol
@@ScriptedLinks the fact you know the metric nomenclature of .50 bmg earned you a night with my small tiddy atfgf
"yo hand me the 50 cal" "but we are on a stealth missio-" "*i said hand me the 50 cal*"
Nice name
Q has a sense of humor. They definitely sent the right number of suppressor segments for suppression and to prevent deviation from the suppressor slumping.
I imagine they sent 7 suppressors' worth, minus the end cap. So each was really 70 pieces. Matt was just leaving that out for the sake of humor.
@@AgnumMD Given the names of all the Q products, I'm willing to give benefit of the doubt to them actually sending 69.
@@holdintheaces7468 Fair enough. I've never looked at their stuff.
The BOYOYOYOYYY at 6:51 got me fr
Bro was definitely in the mood recording this
I cannot believe that you went through all that and didn't shoot a single 22 sub. Can you imagine how quiet that would have been?
Exactly what I was thinking!
The 22 was having issues with the regular rounds.
My thoughts
@@r3dp9 bro it’s a bolt action, it would cycle.
The issue with that is that it would 100% get stuck in the barrel/suppressor. Typically the max barrel length you should use .22 subs in is around 24 inches.
I want to see the bloopers, from this 1. Especially the part where Matt is trying to describe what their doing and keeping it clean. Also, hearing the giggles and laughing, from off camera, makes it funnier.
imagine filming for matt and not being able to laugh. i could not. mans a riot lol
@@Sour_SkunK I wouldn't be able to hang out with him drinking a beer without laughing. Best genuine sense of humor on KZhead.
this is the only channel where iv been a fan for over 10 years
Bro that quietness of the 9MM is mad wildddd 😂😂😂 dope
One could say it's "baffling" how the extremely long suppressors didn't just explode.
That was what some may call a good one my good man lol
One would only imagine an erection 69 links long would always explode 😉
Why would they explode?
Came to the comment section for this, not disappointed 😆
I mean. Why would they…
Matt went from wholesome KZheadr when he first started and now over the past couple of years has shown the real side of his humor. 😂
Ya…. He has
"will an erection, stop a 50 Cal?"
It's those darn Unsubscribe boys! They're a badddd influence on Matt! 😉
He's always had this sense of humour. Just doesn't get a massive erection on screen that often.
He's still wholesome tho
Wow, you sure have a long one! I hope it's fully functional. They all droop when they're too long. If yours is bigger I wanna see it. I don't think the extra baffles made it much quieter. I wish you had checked the velocity at the same time. Nice to see you. Good video. Pax.
lol the look at the camera as the 9mm suppressor is just squeaking away. I can just see a skit where Matt gets into place for a silent kill (assassination) with his suppressor, making sure to move silently, only to then have the suppressor give him away as he assembles 🤣
I've been watching this channel since before Microwave Mondays (If you know you know), and this has to be one of the funniest episodes I've ever watched. To see you go from "I don't want to get demonetized" to "Eff it" is fabulous.
I know what happens on microwave Mondays 😈 “there’s poupon everything” 😂
Don't forget the trick shots with the shotgun and the random stuff he used to load
#BringBackMicrowaveMondays
and the home made shotgun shells
50 cal Friday
I love that at 19:30 it managed to catch a very cinematographic failure to eject
I didnt even see! Thats funny as fuck.
MKE quality.
The small compilation video of the suppressor was so funny😂😂
Great vid. Thanks for trying this.. 😂 the cringe of me and the hubby when you were adding them on esp. The 9mm.😂😂 *boing*
Props to the camera man for maintaining composure for so long. I don't know how he did it
Im sure you can raise the camera above cover...
We've grown old and gray together Matt and you still always manage to get an authentic, jolly, belly laugh out of me every video. Thanks for that. Truly.
As a fellow subscriber for many years, I am very happy to hear that you get a good laugh and enjoy the videos like myself! Cheers!
Oh there's hundreds of thousands of us, I guarantee.
Upsets me He doesn’t use a table
every video 😆
Yeah me too. There are only a few KZheadrs I've stuck with since the start.
I love how it litterally wobbles and jiggles when firing
Good on keeping it classy my guy. Love it.
Matt has finally achieved movie and video game suppressor noise level in IRL with the subsonic 9mm
Dude that was some covert ops suppression I want one lmao
Scenario: You’re the lone survivor of your platoon. You’ve managed to find hiding behind enemy lines with enemy soldiers no more than 30 feet in any direction, and you know your only chance to make it home is with stealth and absolute silence. Your shots will definitely alert the surrounding 30 enemy soldiers. But you remember your Q silencer. It’s meant to be - silence is your plan to slowly eliminate them all 1 by 1. You’re ready. Your family runs through your head. Be silent, be still. Aim true. You begin attaching your silencer… 14:51
😂😂😂
Soldier 1: Why do i hear noises Soldier 2: I dunno, let’s just focus *more noises* Soldier 3: Hey do you hear that? Soldier 4: Yeah whats that Soldier 2: Not sure *an eternity of noises later* Guy: Finally i attached my suppressor The entire frontline’s mind absolutely having no idea what’s happening: *w o t* (I have no knowledge about military whatsoever so i might be wrong on some things) Edit: they probably sent a guy to investigate or smth
Thats just the call of the infamous DemolitionBird they wont suspect a thing
Guy 1: You hear that?! Sounds like someone screwing on multiple 2 by 2 tubes Guy 2: Huh, might’ve just been the pipe men Guy 1: Guess so, even our suppressors wouldn’t make that much noise Guy 2: . . . Guy 1: Hey? You goo-
Its like a duck call for a very special kind of duck.
Gotta double up on ear-pro when screwing them together 😂
Every single time you put on more baffles I could feel my bones shivering 😖
Imagine being on guard duty at your base and you hear a loud screeching sound, looking to your right and seeing special forces putting suppressors on their guns while looking at you
Lmao, shooting them not because they're your enemy. But because you want the screeching to stop
why not just spray them down with wd40 or some
@@nunyabusiness8538 Wen the suppy gets hot the lubricant will carbonize and lock together.
Suppressors on suppressors*
@@LupusMechanicus Never lube your erection. Understood.
Matt -a grown ass man who is genuinely smart and highly educated- not being able to keep from laughing and making peepee jokes is the funniest thing I've seen all day! Love it!
be honest all the dudes in the audience were also laughing there ass off
He had me at boyyoyyoing!😂
Peepee jokes are timeless classic
The day peepee and fart jokes stop being funny is, I hope, my last.
You always forget that Matt is a literal licensed veterinarian
Love the " GlockaMoelli " Hahaha
U need to 3d print supports for the suppressor or something to stop the droop
This is the kind of content that brought me to the channel originally. More of this madness, please!
Fr
The amount of supressor length is absolutely BAFFLING 😂
thats what she said
Very punny
'Heh heh heh'
See what you did there : )
Thelordofguccii follow me here
perfect CQB. need to make sure your elbow is not sticking out, so your silhouette is as compact as possible, while operating with a compact SMG, properly suppressed for a stealth operation.
This reminds me of something I heard as a kid…” science rules” thanks for the vid. You make a better Matt than a window thanks for sure!
Love the glockamolie. I have watched Matt’s videos for a couple of years now. His ability to keep the teenager alive in all of us is an amazing talent. The combination of science and shinanigans is priceless! He deserves his success!!
As a proud Texasseean... Fantastic!
Glockamole* but I agree, that was a good one lol
I literally said during this video, while smiling, with absolute approval, "He is such a BOY!" lol Truly young at heart, VERY funny, but safe and responsible (at least to a reasonable degree lol).
copy comment
nvm my bad
I’d be curious to see what happens to bullet velocity if measured with a chronograph as the suppressor gets longer and longer
this is what i'm wondering.
We're on the same wavelength, the more you suppress the less velocity you gain.
Also see how quiet you can get it. Using a hanger or barrel support so it doesn’t droop as much.
@@thehuntertyranni7497 yeah having that many baffles is gonna slow round down, and little .22 isn't gonna be going faster anymore, I suspect the .22 was dropping below supersonic and is why it got quieter
When matt touched the baffles and some of them where "cold", thats the point of diminishing returns. All the energy you lose from sound and velocity is converted to heat in a supressor. If very little heat is being exchanged, probably very little sound and velocity the bullet is losing. But yes, it would be very interesting to see all that data 🤣
Holy shit i got got by that intro pun. Well done Matt.
Bro, The Glockamoly joke had me pissen... Matt, you are something else my dude.
The look on my dog's face while Matt was putting the squeaky sections on was priceless!
Yeah my cats all woke up and started looking at me like I was crazy for not stopping that sound!!! Probably sounds terrible for them. I put the volume lower so I could listen without bothering them lol. His face when they squeaked too😂😂
My cats & dogs were so confused
I’d love to see a full auto run through one of these huge suppressors! Quality content as usual, keep it up man!
Full auto would shred the silencer because of all the baffle strikes
Was exactly thinking the same XD
Maybe a full auto run might keep the pressure up and there for "Stiffer" and straighter for it's entire length. Peyronie's is now not a problem.
If you have seen a man do the helicopter
dont listen to him hes a scammer, also im in VR well writing those comment🤣
Thanks for the excellent video, I really needed a laugh today.
You should do a follow up video with the worlds longest oil filter and compare!!
I can appreciate this silencer company's self-awareness.
The 9mm suppressor squeaks are like the sound your school chair makes when your teacher says to be quiet.
🤔
I saw the comment and genuinely wanted to see you do this so bad I’m so glad you did it
10:06 reminds me of shooting as a kid. We were reckless growing up dumped a clip into a gravel pile infront of us. Heard the sounds of the bullets wizzing by, a few to be exact. I’ve learned gun safety as I got back into guns. Man how dumb I was as a 12 year old. I don’t blame myself I blame who took us out. Have fun be safe and keep shooting! I’m just getting back in and I’m freaking hooked. Now I gotta catch up on what I missed here hahaha
Would've been interesting to have a noise meter close to the suppressor to see how much quiter it got with more thingies attached
Yeah, decibel meter would have been a nice touch.
Lo tiene, se olvido de usarlo nomas.
That and muzzle velocity.
@@seanhoude ese también, es verdad!!
Matt, delivering good, wholesome family content like always. Really just a man for the people.
Matt Carricker for supreme overlord 2022
"Don't look away from me." Oh, I laughed 😂😂😂😂😂😂😂
"I burned the GLOCK-anoli" That was quite a lot of work for just a throw away "dad" joke! And I appreciate your hard work!
Can we just appreciate the creativity that goes into all of those intros.
Dark wing duck it's a scam
@@PC_outdoors I always read the comments to spot this kinda stuff, thanks for pointing that out!
He burnt the glockamoli
Tbh i dont care for them. Some of them take up a third or more of the vids. Meh
@@looselipssinkships6543 my issue is the amount of just horrible product Matt has and supports since they gave him money for it. I’m all for supporting smaller companies and businesses. But some do not deserve any recognition
Would have been interesting to have a dB meter to see how much more quiet it got.
Honestly
I was coming here to say this...like tf did u even do this for if you didn't have a dB reader on hand?
Was there a benefit adding segments? To me the second one was noticeable after that I didn't hear any difference from the microphone.
Yes but nah, this is a clown channel no fancy tests in here.
@demolition ranch
8:23 The fact that you haven't had a baffle strike yet.... Are you feeling... Baffled? Oh. Ouch.
Action + Comedy + Silliness = Great Video
By far, some of the best content on KZhead. Thanks, Matt!
Any time dude, I do it for the fans
6:49 🤣haha whole video is worth it
6:51
instructor of United States Military Academy “anyone know how to snipe an enemy from 1000 yards ” DemolitionRanch “i know i know ， just install a long Silencers，i mean ，999yards ”
He had a lot of fun with the puns on this one 😂😂
The shot at 19:05 may be the single funniest angle I have ever seen on KZhead. Props to you and your camera man for the best ab workout of 2022
imagine if it just kept going
Would be interesting to see that in war
@19:48 tho... GETTIN IT!
😅agreed, one of the funniest things I’ve ever seen
I was totally expecting you to use a decibel meter and record how much quieter it got each extra segment lol
Or a chronograph to see how much slower the bullets are after leaving that many suppressors.
@@xdragon2k suppressor shouldn’t slow down the velocity at all
You were totally expecting to be at a different channel then, right? :)
Suppressors should actually increase the amount of speed cause it is kinda a barrel extension
@@xdragon2k cod logic
Most people think that the hitman games and movies are inaccurate with the suppressors, but in reality you can make a pistol more quiet than a bow and arrow with the right ammo and suppressor
your sense of humor makes me laugh and just put a like and hope to neet you one day 😂❤