Handmade Isuzu Bus Production in Pakistan || Manufacturing of Isuzu Bus
2023 ж. 26 Қаз.
3 783 863 Рет қаралды
Amazing Manufacturing Passenger Bus in Factory || Production of Isuzu Bus Body
#manufacturingbus #howtomakebus
#Makingpassengerbus #howtomakebus
#manufacturingbus
Cant wait for Pakistan made Boeing 737 episode
🤣🤣 Yes I look forward to that one 👍
hahahahahahahahaha
Imagine if it actually works without accidents 😂😂😂😂
at least dooras can stay in place for longer time. :DDDDD@@JSmithIX
Oh they already made jf-17 jet fighter.
Glad to see everyone has safety flipflops on
What does it matter? If one of your workers get hurt there are literally tens of thousands willing to work the next day to take over his job.
They claim that if they are wearing proper boots and a molten drop of metal falls on the boot then by the time they untie the laces and take the shoe off, it already has burnt through through the boot and they get their toe burnt. If they are wearing flipflops then they can simple kick if off and the injury to the toe may only be a burn mark.
Кожа несгораемая.
@@user-mv3ee4gs7w😅
@@Mark-vn7et capitalism at its finest
The welder is a master of his profession. He makes sure that in case of an accident the complete bus up to the last seat just disassembles and all passengers get catapulted safely out of the danger zone.
And THAT is why you can't get a raise at McDonalds, little buddy!
@@realemonful 20 an hour for flipping burgers ain't half bad anymore
Это точно 😂
Lol
Now I know why they don’t bother installing seatbelts.
The entire thing is held together with spot welds and a dream.
"There was once a dream that was a bus" - Maximus Decimus Meridius, probably.
"And a dream" 😂😂😂
The whole world is popped together and a dream ...... My Nerves
In the Mad Max apocalypse I want these guys around :p
Fallout come to my mind
@@helmut3356Patroling the mohave makes you wish for a nuclear winter
With spot welds like that, I'd be surprised if they can even make it onto the next street.
theyvgonna be useless without electricity 😅
@@rkaya1651 diesel electric agregator
the sunglasses 'protection' for the welding crack me up 😂😂
Better than just squinting I guess xD
Just a thought,Pakistan has nuclear weapons 🎉
@@newtube7187 if they made it like that bus, probably not a huge threat
that shit would fly 1 km and fucking explode in their own territory lmao @@newtube7187
Try welding with ANY KIND of sunglasses, even for 2 minutes, then you'll take that uneducated comment back little buddy
Didn’t know ISUZU had such safe working environment in their workshops
😂 im also sure isuzu will have no problems fixing it, just drive it to nearest authorised workshop.
In india isuzu have big plant 3000-4000 thousand people working in one branch for making bus and trucks😂
@@sunnykumar-wz5dr I can't wait to see Indian made toilets for its 1.5 billion poor population...😁😁😁😁
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@@sunnykumar-wz5dr That's scary Gary ....
Last night I was watching a video of a German factory assembling cars with mostly robots. Tonight YT showed me this. The contrast in manufacturing capabilities is night and day.
Correct.... This is downright dangerous
we are riding the same algorythm
In 20 years time, there's a good chance this bus will still be getting patched-up & used. Most of those hi-tech German cars will have had a 'beyond economic repair' moment & been scrapped by then, LOL...
we had this in europe,many small assemly shops and small factoryes for every product,untill goverment came with regulations and now everything is either super expensive to make because you have to invest in tehnology or just outsorce it from china
@@UnipornFrumm But it is also up to spec, and secure. Now we have EU General Safety Regulation and way more secure vehicles.
I worked in a bus factory in UK and I can say that we did not build them like that, but you have to admire their skill set. I would imagine at the end of a shift you would have to count your fingers and toes.
특히 발가락을 꼭 세어봐야할것 입니다.
These guys know about safety more...I have worked in such conditions and I can say it keeps you fully aware of your surroundings, you develop a 6th sense.
@@Digagz390 These world-famous "super high skilled professionals" need their 6th sense to recognize holes in their safety flip-flops in time. Only the blind welders depend on their guide dogs to bark in time.
Hm ! l travel 10 yrs ago from Terminal 1 to Terminal 3 in a London airport and l remember that the driver was sitting on the same side as this one so there is semularities .... 😛
Pabrik aluminium🤑🤑🤑😇😇😂
The most amazing part is that the whole structure is held together by hastily and randomly placed spot welds, using a $50 Chinese stick welder. I'm sure Isuzu would have no issues slapping their logo on that thing.
Yes , I agree. The spot weld is weird, but why drag the Chinese and the Japanese into that mix.
No lo muestran pero si te das cuenta las partes importantes tienen cordon de soldadura
Get a McDonalds job before you even attempt to participate in an adult conversation!
Seems like much of the structure was finish welded and from camera. The shocking part to me is that the chassis appears to get no reconditioning before the bus is built.
Мне тоже кажется что это не надежная конструкция! Во истину это "рабский" труд! Минимум механизации и защиты!
can't wait to see them build a spaceship
I admire these type of builders building based on what's only available and affordable around them.
It's a pakuzu
It's clever to weld directly onto rust. This saves the tedious pre-treatment of the workpiece.
ARC welders or buzz box welders, its fine to weld over rusted or painted surfaces. The flow of the polarity cleans the surface as its being welded. MIG or TIG you cant do this as the welds wont stick if the surface is clean. Unless you use shield non-gas mig wire and reverse the polarity then yes you can weld on dirty surfaces.
I would say he is using rutile coated electrodes, which can be used easily on rust. It is also very easy to ignite rutile coated electrodes, as you see in the video. But... nothing about this welding is ideal for a build of such a transport.
@@Hammern28 I doubt it, most likely 6010 rods. They can get away with it, because they weld on buzz box welders. Its plenty strong
That has the structural integrity of cotton candy.
Most buses do. The frames might be sturdy but the passenger compartments rarely have any crash or object intrusion protection.
Much like your brain.
Wait til you see how RVs in the US and most of the world are made lol. Straight up plywood sheets and 2x4s lol.
@@claywebb8199shut up you 🤡. Dude was making an observation and didn’t mean to hurt you 🤣🤣🤣
@@DeeperImageAutomotive That claim varies from highly misleading to completely false, depending on the type & country. Campervans/RVs are regularly based on small trucks, with the back replaced with a formed shell. The back is unlikely to be very unsafe in a crash, but most or all passengers are usually in the cab. Not to mention the vastly better structural integrity of the chassis vs something tacked together in an alley. The smaller sized ones are little more than consumer to commercial(larger) vans, to smaller(or occasionally full size) commercial buses with the interior modified.
You dont need safety equipment when you have mashallah ☝️
Если что случится и маршала не поможет👎
Almost for everything. Good observation! I was living with a muslim guy, he told me to say that word or else?!? I was befuddled at the audacity
Quality control and job site safety are top notch. 🥇
The quality control and the safety engineers just lazy peoples originally no want or not possible made productive job. Quality control ? why every west product quality less and less every year ? control accidentally not go out good quality products.
Building a bus on a 30+ years old frame, under the clear sky, with no work safety (foot, hand, eye protection) whatsoever, using only rusty parts and no quality control... Impressive. I surely wouldn't like my loved ones to travel on one of these, but impressive craftmanship, I must say. :)
No Worries! With those front and rear leaf springs I bet she'll ride like a Cadillac........
WHAT ARE YOU ON ABOUT THEY ARE CLEARLY ALL WEARING SAFETY SANDALS !
@@fredflintstoner596 Oh, sorry. I was not aware those are safety flip-flops. What about the welders` sunglasses and the skin-skinned gloves?. :)
@@fredflintstoner596 Some of them are wearing safety feet.
Who give a fuk with your loveone for this bus even with Tesla cybertruck you try parking in middle of railroad and let train kiss it I bet she'd be butter inside, nothing are 100% safety
Блин закинь этих мастеров на пару дней,на мусорную свалку в России, они оттуда на своём автобусе уедут...
в России они замерзнут и сопьются а автобус не построят
где ты видел свалки в России с металлом? У нас в г Находка автобусы и то хуже некоторые ездят причём с корейской свалки.
Ещё и дизайн блюдят
улетят на самолете
@@PeKopgcMeHв центральной России даже своим ходом на металлолом приезжают
Искренне уважение этому народу. С молотком и сваркой построит автобус. НЕ СОБРАТЬ!!! ПОСТРОИТЬ!!!!
I'm screaming "weld both sides!" to no avail. Glad I'm watching this *after* having been on one
Теперь я знаю как расшифровывается ПАЗ! Пакистанский Автобусный Завод! Шутка! )))
Ты отлично расшифровал ты крутой
ГАЗ:Гуджаратский автобусный завод.
Теплица на колесах.
Да это чудо же кривое все, как зараза! Там все, абсолютно все на глазок сделано...
@@user-so9yh1wz8z главное прочное и безопасное (потому что высокопольное)
Сварщик профи, одной пачкой электродов, играючи, такую машину собрал.
Капец, тупо с рамы, на коленке построить автобус, не факт что и рама не самодельная. Трудолюбию и мастерству этих людей не перестаю удивляться, они такие чудеса творят.
@@user-dz7nu3gi3g да, молодцы индусы. Только жалко их. Работают без масок и перчаток. УФ излучение от сварки очень опасное. Я однажды в жару тоже решил со сваркой поработать. Работал в шортах и без футболки. Через час все не закрытые участки тела обгорели. Ходил весь красный)
И заготовщикам аплодисменты
да и еще за 40 минут !
@@user-mr9kv2lg3c Есть видос где один из таких спецов сваривает огарки в электроды обычной длины и продолжает ими варить. Безотходное производство практически...
At this point you dont need to call it an Isuzu anymore. Its YOUR brand now 😁❤
Iz you new bus
@@donw2175 Izu-nu. ♥️🚌
Incredible watching the Minions at work.
Зашёл посмотреть по быстрому , в итоге просмотрел весь ролик на одном дыхании ! Удивили меня эти парни в сланцах !!! Ни перчаток , ни масок сварочных !!!!
Инвалидность лет в 50 гарантирована. Хотя о чем я, кто им ее даст, там никаких соцгарантий так и нет..
@@dont.try.to_searchтам ещё надо сильно постараться дожить до этих лет.... впрочем о чем это я? Тут бы в России достичь хотя ты 70% мужиков,которые до этого момента доживают.
а теперь глянь обзор на уаз буханку))))))))) сравни
@@user-kh5dv4wt2z УАЗ собирают в сланцах с рулеткой на коленке? К чему твой высер?
@@dont.try.to_search высер у тебя как раз))), УАЗ собирают не в сланцах и не с рулеткой, но выглядят швы на нем сварные и вся остальная сборка , как раз так.....Коль не понял посыл мой, так промолчи-умней смотреться будешь
Quality of the materials aint great but the Craftsmanship is top notch.
У них простая техника,которая делается вот так,на коленке.Но работоспособности этих людей поражаюсь.
Они стараются встали с колен и теперь догоняют Португалию 😂
Considering the way it's just thrown together it turned out pretty damn good looking.
Good looking death.
@@ruxrox Yea I think they're thinking go out in style.
@@ruxrox These buses probably max out at 60km/h, it's not like they'll crash at high speed.
@@awdrifter3394 how about around 120 km/h , I've seen them in action , and yes whenever they see a rival bus company with the same cheapy glorified bus , they start racing each other
@@user-gy9oq2cv4iI've been in them .. and no they don't have the roads to drive that fast in this traffic or badly maintained roads
The person making the KZhead video is the smartest person with more pocket money…and clean clothes…😊
Something wrong with that?
With so many garages shutting & difficulty in employing staff in UK, these people would be a godsend. A new look for the Green Line!
💗💗💗💗💗
You gotta be shtting with that sarcasm lmao
@@NeonAstralOfficial What sarcasm???????????????
Надо отправить к этим мастерам, рабочих с завода уаз на стажировку. Глядишь и качество сборки "буханок" улучшиться.
Суровые парни! Варить элктродом стоя во вьетнамеах!)))
Да, жесть, без краги и без сварочной маски, а красят без респиратора и без защитных очков. Про каски и ботинки вообще молчу. )
The real magic is making a complete bus in flip flops 👍
The magic is in flip-flops, that's why they're wearing 'em
Loved to see the construction process of the Bus, but please give a Covid cheap mask to the painter!
Would do as good against paint as it did against that thing you mentioned but didn’t get deleted or shadow-banned for like I do.
@@yopappy6599 Not talking about the vapours, getting the mask tho highly insufficient is just better than nothing...the way it is big particles are going in to not just micro.
A mask is probably the least of their concern tbh
хотя бы так! С такой техникой безопасности эти люди долго не проживут! Я уважаю их тяжелый ручной труд!
Makes a little difference that won’t stop the VOCs
Amazingly smart and creative team work. Salute from Sumatra Indonesia.
Love the Acme welding sunglasses 😎
И противоударные шлëпанцы.
Good thing you're not trusted with more than a McDonalds spatula! Are you sure you should even handle THAT?
Safety first! Welding with bare feet in open toe shoes. Got a like it.
Ржавчина заложена производителем, следующий кузов через 5 лет?
Absolutely incredible to watch these guys manufacture buses with the minimum of high end machines the way they all work together is amazing it was a delight to see such enterprise well done everyone
Durant quelques mois de ma vie j'étais carrossier de bus, dans les années 1990... c'était beaucoup moins rudimentaire que ça😂
They use whatever tools they have and can afford to build such machines with amazing skills and diligence. Such a joy to watch.
Welldone Indeed.. but what I can't stand is these Western haters, always critiquing like Karen's.. Welldone you men 👊🏿🇯🇲
Nonsense, that's not a bus - it just looks like a bus. I don't really want to drive it.
@@mikepower596 Well there's a reason they don't build em like that in 'the west'. Mainly because we don't like to have that many deaths in collisions, or similar events that always seems to happen to these kinds of busses in those kinds of countries...
Похоже, что у этих ребят, такие слова как: культура производства и техника безопасности, даже в словаре отсутствуют.
ТБэшник што-ли?😂
@@indefatigable9 Нет. Просто я несколько лет проработал на заводе. Сначала слесарем, потом шофёром. А когда ушел с завода, стал водить троллейбус. Так что работа в заводских цехах и за рулём, мне знакома не понаслышке.
У нас , вроде-бы , и тб и культура производства на уровне... а "буханку" канючим уже 50 лет и ни как до ума не доведём, ну и где эта грань целесообразности????? А они, тихой сапой, в ручную восстановливают....
@@user-dz2ut5ff2z Скажи спасибо компрадорской буржуазии, у которой власть. Их не интересует развитие производства в РФ и внутренний рынок. Именно поэтому мы видим перманентное падение деревянной валюты и двукратную инфляцию. Чем ниже рубль, тем больше в карман положат в нефтедолларов. Ну и отдельное спасибо рабочим, которые даже повышения зарплат не требуют. Терпилы ссаные и ленивые.
потому что у них нет ни проверок ни пожарников,ни сэс,ничего,они работают ради результата в своем самозанятом кооперативе и только,им жить надо на что то,а не бумажки перекладывать
Bravery award has to be given to the drivers and passengers😂
I think these guys are impressive! Grafting at its finest! It’s easy for people on here to mock them for their “standards”. Especially when you won life’s lottery and were born into a wealthy country. For people who grew up with nothing and get paid nothing, this is nothing short of incredible. They deserve praise:)
Obviously
Tough, hard-working men, amazing craftsmanship and artistry. The paint job and finished interior looks amazing. I've no doubt these lads could fabricate a pretty convincing Lambo or a Ferrari from scrap alone. I pray by some miracle they will not go blind with all that unprotected welding.
I dont hear feminists screaming about no females working there.
5:06/7 Saftey Glasses/ Flash protectors........😎😃
I've never seen any like that. I've not welded since I was a teenager though ;-)@@user-wh2ut7pt5s
@@user-wh2ut7pt5s This is the latest model, it also includes X-Ray vision
Company supplied Sunglasses. :-) @@user-wh2ut7pt5s
It seems that in Pakistan there is no vehicle suitability test from the government, in Indonesia the suitability test is fully enforced, the dusk lights turning off during the test alone do not pass the suitability test, so the suitability test standards must be strictly maintained because later the bus will carry many passengers.
Какой тест в нищей стране? Какая безопасность на отработанном шасси,где в любой момент может лопнуть рама или мост,я сам живу почти в такой стране
These is Pakistan😂😂😂
You just have to look at their building methods to realise they have no standards in Pakistan.
These are nit registered mostly are in urban areas or Karachi Kachi Colonies. Nothing related to Govt
Pakistan and India both have very low accident rate
Каркас обшить поликарбонатом и самоходная теплица готова:)
You are all so lucky you get to work in pajamas and sandals. Everyone in Australia worrying about PPE but it’s uncomfortable
this clearly shows the standard of Pakistani buses on the roads.......i would never sit in one!..........imagine Pakistan manufacturing buses like this in 2024!
These are the local buses. These buses are only used for short routes There are high end buses in Pakistan as well
And this country has nuclear weapons. 🙃
@@gaborbakos7058yup, that's crazy. Are their nuclear weapons also handled this way?
@@crimsonlightbinder The Nukes are made from old Buses.
these are real hard workers ...salute to you guys keep it up your good work
А сколько баллов он наберёт в краш-тесте?
Deep deep DEEP respect. Almost NO power tools and mostly done by eye. Remarkable. I suspect they've had a fair bit of practice. Apart from the gaudier examples, not a bad looking product at the end.
+1 Reason never to go to Pakistan, the list is getting long.
Eyes won't last long for the welders at this rate ...
They are welding only one quarter of the profile! Such craftmanship! It is going to break on the first hole in the road
I admire that they can build something like this at all with such limited resources, but I really, really wouldn't want to put the crash resistance of this body design to the test. My hunch is that the chassis would stay intact whilst allowing the framing to "concertina" into itself or possibly shear off altogether from its weak welding.
You forgot the domino effect of the seats as they break free from the boilerplate and the catapulting of the passengers through the air. I wouldn't catch that bus if you paid me, in diamonds. rofl
Glad to see they're leveling the frame and making safety crumple zones.😄
Crash test must be very funny in Pakistan 😂
unforunately all pessengers always dies in accidents due to bus drivers racing habit 160 plus speed
🤝😊,извольте не беспокоиться 😂😂😂, там его нет и не существует 😂😂😂
Well, the bus body / interior might be "new", but the base chassis has certainly seen better days. A very striking contrast to bus / coachbuilding in the EU / West, where a "New" bus / coach means ALL new, not just the bodyshell / interior.
Lets just say...what roll over protection...everything is barely spot welded together. Body welded directly to chassis.
@@cwmbcpppòoooòòppppòpy6 30:57
Well the bus is the cabin, the chassis and the engine could be a truck. You never know, where there are no doctors, you receive your healing from the umulimo or the shaman
@@cwmbc.I don't think they care much about the integrity of the welds let alone rollover. You know, power, labour and welding rods are expensive overheads. Why spend on u bolts if you can spot weld. And the bus will get all the necessary paperwork because the inspector if any is worse. They simply could glue assemble the bus.
M from pakistan these buses or more better then company buses beacause they it on bad roads where company buses can't work and after 5 to 7 years i think they again rebuilt it
Laugh all you want, but in an apocalypse, you would want these guys
Great Work !! Incredible Result !!
more proof people are better than automation
у сварщика, по всей видимости, есть запасные глаз 5 комплектов.
у них есть пять запасных миньонов в качестве сварщиков
Им деваться некуда. Как у нас в РФ привыкли буржуи пи*деть - не нравится, вали, за забором еще сотня безработных стоит
Er trägt eine Sonnenbrille
Cool craftmans work, love the safety footwear... wonder that they have toes left
😂😂😂😂
😀😀😀😀😀😀😀😀😀😀😀😀
Ваще - то это рабочие сланцы, защищающий ног от производственного травматизма!😊 Что касается рукавицы они невидимки, их не видно, но они есть.
There is hot air temperature in Pakistan upto 40c. So nothing happens to our hands and feet. We just feel sour eyes in the nights if weld without glasses
Wonder if they have one of those “days without a work related accident” signs out front? Or maybe a “lost four toes today” sign.
Обалдеть, автобус ручной сборки!!!! Красота....
Thought the seats would be bolted to the floor, but nope, it was the magical 3 point weld again! Do they weld the driver in as well? 🤣
Made in Pakistan is always amazing and fun to watch. It truly display skill and competent of each engineer who perform this " magnificent Art"
Вот оно настоящее импортозамещение!! Догоним и перегоним Пакистан
У вас так танки делают,что ты про наше импортозамещение беспокоишся?!
@@user-ws7ni3vk2t танки импортозамещать не получится они для каждой страны секретная разработка
All respect to Pakistan people. so impressive and genius
NASA should hire them to make a spaceship to Mars
حريفين المهنه ماشاءالله
Using the LJAR (looks just about right) manufacturing method. I have to admit they build a nice looking rig.
Fred flintstone would be so proud of this creation 😊
Passengers safety left the chat 😂
This buses last over 30 years working is amaxing and they handcrafted in a backyard
I love that the parts already rusted :D but you work what you have! RESPECT.
pre-rusted from the factory :D
It's surface rust. Means nothing.
@@josephcrowley7635 u mean u can spray with acid and make it old?
@@josephcrowley7635 It means plenty, rusted steel won't weld properly unless it's ground off, not to mention that manufacturers attempt to minimize the possibility of rust & certainly don't *start* with rusty steel. It also tends to be an indicator that they're using low quality steel, ie: whatever's cheapest.
Only the outer layer rusted, but not the whole thing. At least that is what I think. New rail tracks look like this too: older ones look shiny as the outer layers are worn. As long as it is surface rust the structural integrity is fine.
Наши ГИБДД-шники бы любили бы эти автобусы) Сколько штрафов за все подряд можно было бы собрать 😂
Сотня абреков в автобусе, которым надо в город на базар, и тут их тормозит какой-то ряженый клоун с причиной докопаться до ТБ. Да его там же и похоронят, только по жезлу в качестве памятника можно будет найти.
Do you even have traffic police. lol
Там дураков не. Полиция нормальная.
@@user-ov3hu5ll7l ну так и живи там, кто же мешает.
@@user-ov3hu5ll7lтак же берут взятки только масштабы другие
I trust that bus more than any other bus
Now that I what I call real body builders highly skilled huge respect
انا كعامل في شركة volvo بالمصنع الذي يوجد بالمغرب لذينا كل وسائل الامان والمعدات الحديثة لكن انحني لهدا الشعب الباكيستاني الذي يصنع اي شيء بيده نتفق على ان العمل امن او لا اكن التحية انهم يصنعون اشياء ثقيلة بايديهم
❤❤❤❤❤عمل جميل والله حياكم الله دايما موفقين أن شاءالله في ملاحظة صغيره بالنسبه للمقاعد مفروض يكون مسمار أفضل من اللحام قابل للفك والربط والسقف برضو وشكرا جزيلا ❤❤❤❤❤❤❤❤
Ходят легенды, что по этим технологиям брахманов еще 4000 лет назад был изготовлен первый автобус Исудзу. После чего был там же угнан, попал в ДТП со слоном и распилен на метал.
the Guy who sprayed the bus is an artist, to get that finish in those outdoor conditions is nothing short of amazing.
Very impressive how these guys work although many safety issues here ie protective clothing for example, but they working well as a team and getting work done in this limited workplace hats off to them 😃
I admire the talent that these guys have with what they have to work with. Working in dirt, in sandals or barefoot, no eye protection, no paint booth, imagine what they could do with the right equipment. Must be heaven to be able to create things with no government interference with rules and regulations.
There is no government interference because sharia rules. Hence zero care for the workers.
Это не рай это мануфактура, в основном это семейный бизнес ,тоесть функции государства берет на себя семья тоесть если какой-то работник ослепнет семья будет его содержать за свой счёт! Было бы крупное предприятие то без государственных законов по защите рабочих люди бы стали как расходный материал! ослеп выкинули взяли нового , хозяину завода не нужны расходы по уходу за больными или расходы на средства зашиты рабочих им бы вот таких которые будут работать в своей одежде,в своих сандалях !
I agree with the admiration part, impressive work and talent. But it sure is a different approach to work safety. There's probably 10+ guys every morning at the shop searching for a day's work, so it makes no difference for the owner if the painter spends his working hours high on thinner fumes, and being exposed to chemicals via skin contact and inhaling paint spray. When, in the not so distant future, he cannot work anymore, the next guy in line has his job. By then the ex-painter and his family would probably appreciate government interference in the form of some resemblance of a social security network.
@@hemmo3732A sensible comment. It's amazing that in 2023 people think basic safety, environmental, employment and other laws are "governmental interference" . . .
well go there and work for them im sure you will live to the ripe old age of 50 and you will make bank at probably $200 per month. heck you may even still have both hands with 5 fingers between them! dont forget you start at 7am and dont stop till 9pm 7 days a week no breaks no bathrooms so dont eat or drink too much.
Amazing improvisation. It takes intelligence to achieve with very basic tools and no wastage....not just a spoon fed factory worker. 13:29
Very impressive. I am amazed by the skills being applied by the fabricators. Kudos
Главное, чтобы Хабиб хан остался довольным!😅
Да, довольство Хабиба это то, ради чего все живут ☝☝☝
Так бы у нас работали в автопроме
@@Sergej837дак они вам "ваши" Богданы выпускают, тарас😄 Поделие кстати не лучше.
Hi how are you
Hi how are you
Well considering what they have to work with the bus turns out really nice. The painter is a really artist and has a load of skill.
Молоток+сварочник=автобус. Сварной ваще человек из стали!!
Impressionante a habilidade desses operários, construíram um Rolls Royce Paquistanês. Todo feito á mão! Parabéns! Abraço do Brasil!
Impressive...ffs... Its a death trap all day long😂
Что за сварочный аппарат такой удивительный, что по ржавчине ещё и тройкой и не разу не прилипло и всегда идеальный провар?
если аппарат действительно хороший то ему побоку. Довелось по работе варить малюсеньких размеров инвертором Патон, находил такой потом в интернете, так он стоит в 5 раз дороже всяких бытовых что продаются в магазинах. Варить нужно было шину в толстом слое краски. Говорит мне "да цепляй массу так, и чистить не нужно под шов. Я скажу так приятно варить мне еще не приходилось, поджиг моментальный, не смотря на краску и дуга горит стабильно, мягко...
@@zzzTEMAzzz а что за моделька была, не подскажите?
@@user-ln7qe8vz5j Не помню, года 3 назад было.
ALLAH BLESS PAKISTAN!
بيض الله وجيهكم
Seems like all parts are recycled from everywhere.😅 Amazing
These men are amazing at what they do, if they worked in a real assembly plant with proper tools, they would give the manufacturer 150% of effort in putting these vehicles together, great job guys, you impressed the hell out of me!!
Это зомби.
Да ещё чтоб платили достойно за такую работу
funny thing its cheaper than full assembly. Locally on spot..part of it is recyclation of imported parts...that counts too
А еще у них по 10 пальцев на руках и на ногах. Удивительно! Но это наше будущее.@@user-ku2ey6hl6v
Give me a break. They would do everything and anything to find ways to cut corners and not be caught. You overeestimate these poor souls. Everything is about speed her. Not quality or precision.
State-of-the-Art manufacturing as per usual, eh Khan? Finest British engineering...thoughtful, ingenious, reliable, big-mouth-mongered and absolutely trustworthy.
In this neighborhood these men are gods.
Early '90s thru 2000 city called Bursa in Turkey 1000's of lorry/track chassis used and converted into double decker busses. Those days owning a double decker was like a prestige for local travel companies. The companies which could efford to purchase Neoplan brand double deckers were having amazing profits while the rest received less interest from the regular travellers. The cost of having geniune double decker was and has always been immensely expensive, to compensate the difference travel firm s led to build their own double deckerss by mostly using Volvo brand lorry chassis'. However the quality of the conversion was as good as a building brand new buses unlike what we see in this video. Finally I must say that the Pakistani work-force amazing, if they were given fair opportunities they would have likely built amazing vehicles. Thank you for the video.
Na Europa as grandes marcas fabricam carroçarias monobloco., vidros vulcanizados, ar condicionado. Enfim quem não tem cão caça com gato.
Who cares Remember that Al Bundy makes 4 touch downs in one game
Good work
Они бы уже давным давно собрали лиман, и улетели с этой планеты
Wahnsinn, das ist noch richtige Handarbeit! Sehr interessant das zu sehen! 👍🏻 Wer sowas kann, der findet überall Arbeit! Super! 👌🏻
Ja genau auf dem Industriestandart der westlichen Welt ca. 1920. Vom Arbeitsschutz wollen wir gar nicht erst anfangen. Aber trotzdem gute Handarbeit.
@@claudialudwig3039 Dia Handarbeit ist top, aber TÜV sagt trotzdem nein haha
Mehr als top musste mal mit fahren das Ding läuft wenigstens
bravo harika bir otobüs oldu.
за 38 минут и 13 секунд собрали автобус. ну норм.
Думаю что пирамиды египта это их рук дело, очень серьезные мастера!
Вот это я понимаю качество!!!!))
Hoping the tack weld and bondo gods will help keep everything together....
LOL right!? People mentioning great craftsmanship..... Meanwhile the entire structure is slapped together with crappy tack welds. On one hand I can appreciate they have to work with what they've got but let's not pretend this is some great craftsmanship even with what they have it's still slapped together and made like crap. They must have ran out of crazy glue.
@@Johnnywhamo Seems they do not care about human life, for something that transports a lot of people built with such quality.
@@null643 .....agreed. Based on many other manufacturing clips I've seen from there...apparently life is cheap.