KZhead
Автокөліктер мен көлік құралдары

Caterpillar Monster Tire Repairing || Repairing A Huge Old Tire Sidewall || Tire Repair

Apple Tales
2022 ж. 9 Қаз.
6 795 118 Рет қаралды
Жүктеу

This video will show you how to quickly and easily repair a caterpillar tire sidewall. You'll learn how to patch the sidewall and prevent further damage. Watch the video now to get started on your repair.

Пікірлер

  • This man is tough - no eye protection, no work boots and he still flourishes.

    @Michael-fw5ef@Michael-fw5ef5 ай бұрын

    • He's wearing a mask😂

      @marvinfruth1892@marvinfruth18922 ай бұрын

    • Protection of what,we live in a dangerous world,what is Palestinians or Ukrainian doing to protect them selves

      @franktutut2678@franktutut26782 ай бұрын

    • He is not tough; just poor.

      @keithrothman7253@keithrothman7253Ай бұрын

    • Protegido por cristo rey 😎

      @diegorodriguez1554@diegorodriguez15548 күн бұрын

    • ​@@diegorodriguez1554Dr Rey 😂😂😂😂😂😂

      @fabricioireno4272@fabricioireno42726 күн бұрын

  • Wow that blade is incredibly sharp!! anyone who has tried cutting off a simple car tyre from a wherl rim will know just how hard the tyres are to cut, impressive!

    @DM-by2fp@DM-by2fp7 ай бұрын

    • would very easily slice off finger ends, too, I presume...I cringed when he was pulling it toward him with his fingers just millimeters away...

      @dyer2cycle@dyer2cycle6 ай бұрын

    • so would my kitchen knife@@dyer2cycle

      @goodo5691@goodo56915 ай бұрын

    • @@dyer2cycle The video being sped up 2x makes it look more haphazard.

      @StudioDaVeed@StudioDaVeed5 ай бұрын

    • Have you ever tried cutting rubber that thick? It's easy with any sharp blade. As long as it's close enough to sharp.

      @rsz90182@rsz901825 ай бұрын

    • pretty sure that was a chisal bit for an air hammer. just slightly modified / sharpened.

      @moe6806@moe68064 ай бұрын

  • There is a deep satisfaction working with your hands. The skill in this man's hands is masterful. God bless him and his family.

    @sammyc6405@sammyc64059 ай бұрын

    • Bet He's doing for penny's as well

      @Amathusukx@Amathusukx9 ай бұрын

    • ​@@Amathusukxты не спорь, это и без тебя понятно, а работай и созидай как этот человек.

      @alexandrpravda4700@alexandrpravda47008 ай бұрын

    • @@alexandrpravda4700 Что еще обиднее, что людям приходится так жить, не желая жизни в суматохе.

      @Amathusukx@Amathusukx8 ай бұрын

    • Speriamo che non si riproduca!!!

      @alfa757@alfa757Күн бұрын

  • I seriously hope these hard working men are getting royalties for these vids ! I would like to know Thank you

    @julianp4787@julianp47878 ай бұрын

    • They aren't.

      @jupitereye4322@jupitereye43222 ай бұрын

    • I AM HERE TO LET YOU KNOW THAT THEY ARE NOT AND WILL NEVER BE PAID FOR THESE VIDEOS THANK YOU FOR YOUR CONCERN!

      @shanoemichael4439@shanoemichael44392 ай бұрын

    • IF U WANT TRANSLATION THERE ARE BASICALLY SAYING WE ARE GOING TO SELL THESE TO DUMB AMERICANS AND LAUGH WHEN IT POPS WHILE THEY USE IT!

      @shanoemichael4439@shanoemichael44392 ай бұрын

    • They don't even bother to wear eye protection, I doubt getting youtube residuals is at the top of their priorities

      @markgriz@markgriz2 ай бұрын

    • It's a re-posted video.

      @logik969@logik969Ай бұрын

  • Unable to see the finished repair at the very end because of the stupid ads for the next suggested video, Thanks uboob for ruining the video. That is such hard work. Just imagine what this man could get accomplished in a properly tooled shop with good equipment. Impressive, most Impressive.

    @Sarah_Swede@Sarah_Swede4 ай бұрын

    • 9

      @neunildogusmao2206@neunildogusmao2206Ай бұрын

    • I thought the same. What an anti-climax. I find myself watching loads of these vids at the moment. Fascinating stuff

      @allmech_BMW_fault_finding@allmech_BMW_fault_findingАй бұрын

    • 😊😊​@@neunildogusmao2206

      @NikolaBogdan-dm8ph@NikolaBogdan-dm8phАй бұрын

    • Good post, Sarah.

      @douglashairston7808@douglashairston780829 күн бұрын

    • 100% agree. I feel like giving this video thumbs down.

      @GSSurry@GSSurry17 күн бұрын

  • I am in awe of your work, the heat, grime, pain… I can feel in my nostrils, God bless you.

    @MrStevecrasher@MrStevecrasher8 ай бұрын

    • I hear nostrils of Olympic runner too

      @RM-ci7be@RM-ci7be4 ай бұрын

    • You need a face mask

      @sheguworldgraphics@sheguworldgraphics3 ай бұрын

    • Ve al médico, no es normal sentir eso en la nariz al ver un vídeo

      @renebravo7582@renebravo758219 күн бұрын

  • Дааа, жилистый мастер! Такие огромные покрышки один катает и приподнимает!👍👍👍

    @misterx2985@misterx298510 ай бұрын

    • В СССР бабы рельсы меняли😂😂 Наверное в душе хотели гироскутер и смузи. Но ссука приходилось. Этот мастер в день пару баксов получает.

      @mr.meeseeks8230@mr.meeseeks823010 ай бұрын

    • @@mr.meeseeks8230 в год

      @user-fw9qx4xk9w@user-fw9qx4xk9w4 ай бұрын

    • @@mr.meeseeks8230 ."Пару баксов"- это если мастерская не его - но судя по его раскованному и весёлому поведению - мастерская его - так что далеко не пару баксов. (там одной новой резины что он наклеил на "пару баксов".

      @user-tf9ln6cs2p@user-tf9ln6cs2p2 ай бұрын

    • Потому и жилистый, что в одного и катает и поднимает покрышки

      @user-xu2xk1vv4p@user-xu2xk1vv4p16 күн бұрын

    • ❤

      @telemaster102@telemaster10214 күн бұрын

  • Такую покрышку только выбрасывать. Такой ремонт возможен, если на этом колесе куда то надо неспеша доехать. Работать под нагрузкой на ней смертельно опасно. Никогда так не делайте!

    @user-ib2vo6rt7j@user-ib2vo6rt7j7 ай бұрын

    • Talvez seja para máquinas agrícolas.

      @renanrodrigo4101@renanrodrigo4101Ай бұрын

    • они так 20 лет делают ,а ты спец видимо во всем ?

      @user-rp5yy4se1z@user-rp5yy4se1z29 күн бұрын

    • @@user-rp5yy4se1zТам были волока прочности из кевлара, произведенно под выским давлением. А они на такую огромную дырень, просто резины наплевали. Давлеение в такой поркышке 800 PSI, не меньше.

      @andrey6009@andrey600927 күн бұрын

    • @@andrey6009 ага 8000.

      @user-rp5yy4se1z@user-rp5yy4se1z27 күн бұрын

  • So much respect for this man and the work he does ❤

    @raymondmumford6255@raymondmumford62554 ай бұрын

    • It's the exact same method used to patch sidewalls in the US just on a large scale

      @JohnnyOla511@JohnnyOla5114 ай бұрын

    • I'm going to give my respect for the person stupid enough to drive with it.

      @beendoneagain@beendoneagain3 ай бұрын

    • I had to take a nap after watching him work so hard. 🇺🇸🍺

      @rayRay-pw6gz@rayRay-pw6gz3 ай бұрын

    • Totally agree. I also suspect he doesn't get paid nearly enough for his skill level.

      @dougmilne8425@dougmilne8425Ай бұрын

  • Incredible! They did what I thought was impossible.

    @stevefoley4073@stevefoley40734 ай бұрын

  • I hate the part replacers in USA, and they call themselves mechanics. I had a nail barely on the side, they wouldn't patch it and offer me to sell a new tire almost $50 dollars more than I paid on amazon. That infuriates me even further so, I take it to an Asian, he does it and don't even charge me. Funny thing is, I don't even remember which tire it was now and its been well over 2 years.

    @user-jk8yv9yh4t@user-jk8yv9yh4tАй бұрын

  • Excelente trabajo trabajo de reconstrucción del neumático saludos desde Ecuador bendiciones.

    @juanpazmino6604@juanpazmino660410 ай бұрын

  • What’s really amazing is the workers still manage to keep all ten toes.

    @jimf.625@jimf.6252 күн бұрын

  • Would love to see what the tyre manufacturer makes of this repair. Obviously they don't recommend it but would be really interested in their views anyway.

    @Spedley_2142@Spedley_21429 ай бұрын

    • Horror most likely

      @mellowfellow4755@mellowfellow47559 ай бұрын

    • It has been approved by the Dept. of Transportation 100%. OSHA approves of the work environment. Dept. of Public safety approves of his OPEN TOE sandals. And the EPA gives two thumbs up for inhaling hazardous materials. It's all good.

      @Privileged-White-CrackHead@Privileged-White-CrackHead8 ай бұрын

    • these vehicles are not used on roads.the new tyres are extremely expensive@@mellowfellow4755

      @najeebkhan1265@najeebkhan12658 ай бұрын

    • they would be appalled yes...

      @fedecano7362@fedecano73628 ай бұрын

  • Корд покрышки, при боковых порезах, не восстановить. Работа, проделанная им, не стоит и ломанного гроша.

    @user-kc8xy3sl9x@user-kc8xy3sl9x9 ай бұрын

    • Учитывая цену их работы в две копейки и бутылку воды,думаю это как-то выгодно заказчику. Тем более это все же не порез. Видимо сколько она ещё подходит после таких работ вполне оправдано ценой.

      @Youtube-crime@Youtube-crime3 ай бұрын

    • @@KZhead-crime Изучите, пожалуйста, что такое корд покрышки, и вам всё станет ясно.

      @user-kc8xy3sl9x@user-kc8xy3sl9x3 ай бұрын

    • @@user-kc8xy3sl9x в просьбе отказано. Изучите пожалуйста,что такое экономика.

      @Youtube-crime@Youtube-crime3 ай бұрын

    • Корд? Какой-такой корд? В покрышке еще и железяки какие-то есть? Не, они про это явно не слышали😂😂😂

      @crystalgt8196@crystalgt81962 ай бұрын

    • @@user-kc8xy3sl9x зачем мне это? Вы по русски читать умеете? Если ремонт покрышки будет стоить 100 рублей,а проработать колесо ещё сможет на 500 рублей,то есть ли смысл в таком ремонте,или нет?

      @Youtube-crime@Youtube-crime2 ай бұрын

  • I see you with a lot of admiration and respect because your work is not one, everyone does it with love and well done, for me you are great instead of throwing away you rebuild ❤❤

    @karlaloaisiga7796@karlaloaisiga77964 ай бұрын

  • Very hard work but you can get it done you the man for the job very much great work I give you five stars ⭐⭐⭐⭐⭐

    @speedybuggy1677@speedybuggy1677Күн бұрын

  • Excelente trabajo una maravilla obra saludos desde Chile

    @claudioenriquesototapia9303@claudioenriquesototapia93038 ай бұрын

  • Друг , береги здоровье, спину !

    @user-vi7nj4qg2n@user-vi7nj4qg2n8 ай бұрын

  • With a good portion of the strength of the side wall removed it would be interesting see how long that patch will last.

    @jeffyoung478@jeffyoung4789 ай бұрын

    • Na, na, he has rubbed it with the magic wheel, all will be good, or maybe just slightly okay.

      @janskeet1382@janskeet13828 ай бұрын

    • IKEA Furniture long

      @TooBlessedToStress88@TooBlessedToStress888 ай бұрын

    • Longer than your new ev , that's for certain !

      @ImaOkie@ImaOkie8 ай бұрын

  • Hard work for sure. I hope with what ever is made on these video's these men get some eye protection when grinding. Hot I know but to enjoy the fruits of all this labor it would be nice to have two eyes. Thank you for showing how this is done.

    @michaelbezoski3096@michaelbezoski30962 ай бұрын

  • I like the fact that they follow all safety procedures to the letter. Well done!

    @rangermiller9969@rangermiller996913 күн бұрын

  • Great job! well done! I would never patch a sidewall damage, especially if used on open roads!

    @user-jw5ng5gg8y@user-jw5ng5gg8y5 ай бұрын

    • Remember this is Pakistan ,and it is different world my man ?!!!!

      @palangnar3588@palangnar35884 ай бұрын

    • Also no DOT or OHSA or any other regulators.@@palangnar3588

      @quackula9190@quackula91903 ай бұрын

    • Dose this tyre look like road user tyre?, its low speed tracks farm work or eart move track use this type tyre.

      @ersoy47@ersoy4726 күн бұрын

  • Genius craftsmanship mate blessed .

    @joslynanderson4681@joslynanderson46819 ай бұрын

  • Amazing job. This guy knows what to do. OK, no safety protection, but I think that is not common in that part of the world. Regards from Denmark

    @FlyToChina0071@FlyToChina0071Күн бұрын

  • As someone with 20 years of experience managing a Bandag retread plant, I approve of this video.

    @ldiablo9921@ldiablo992115 күн бұрын

  • Amazing to watch this man at work. He's very skilled and knows exactly what he's doing. Made a perfect repair and the tyre is usable again and has plenty of life left in it. 👍👍👍

    @pauldixon3089@pauldixon308910 ай бұрын

    • Repetitive tasks don't take a lot of skill.

      @cheekygnome@cheekygnome8 ай бұрын

    • Suppose you are Jack of all trades but master of none.@@cheekygnome

      @davidbowden8362@davidbowden83628 ай бұрын

    • ​@@cheekygnomeshow us how easy it is to shear sheep then

      @paulandersen8396@paulandersen83967 ай бұрын

    • @@paulandersen8396 how would I do that? I've never sheared a sheep. That word "repetitive" means something.

      @cheekygnome@cheekygnome7 ай бұрын

    • Bollocks would you buy a tyre from them .

      @davidclayton9383@davidclayton93835 ай бұрын

  • I have done similar repairs myself long time ago when I was working in a tire shop. I could use commercial patches inside and didn't have to make a patch from a piece of a tire like that guy. And we used an electric heater designed for that.

    @oh2mp@oh2mp8 ай бұрын

    • 😂 You can learn here

      @harounsamadi2527@harounsamadi25277 ай бұрын

    • It is like aircraft serviced in Iran )))

      @alexeyn5380@alexeyn53807 ай бұрын

    • @@alexeyn5380 that's Pakistan bro

      @saadtariq4316@saadtariq43166 ай бұрын

  • The skills and expertise required is very high and cannot be acquired overnight.

    @jayaramsn3666@jayaramsn366618 күн бұрын

  • Opinion,,,,,these workers are fantastic. They make do and work hard.

    @allamar9083@allamar9083Ай бұрын

  • А корд как восстановить!? Это шина тяжёлого погрузчика и она после такого ремонта разлетится через пару месяцев!

    @alexnadeev7661@alexnadeev766110 ай бұрын

  • Job well done brother. God Bless you.

    @harshabiliangady3211@harshabiliangady32119 ай бұрын

  • These tires are made from recycled flip flops. And after these tires were scrapped, they are making flip flops from them.

    @horstmuller7512@horstmuller751210 ай бұрын

  • Заплатка без корда. Она вздуется и разорвётся при первой же накачке

    @studentmai@studentmai10 ай бұрын

    • Cel din interior este cu șnur!

      @nicudragomir3657@nicudragomir365710 ай бұрын

    • Não vai estourar não...o trabalho foi muito bem feito... Esse borracheiro sabe como executar o trabalho

      @zesergius9000@zesergius900010 ай бұрын

    • @@zesergius9000 Мы вам верим. Молодцы.

      @user-df2hd9lf7x@user-df2hd9lf7x10 ай бұрын

    • я думаю если, этот человек имея своего рода станцию по ремонту подобных покрышек и он уже определенно не первый раз делает такой ремонт, то перед тем как взять заказ на ремонт, он очевидно знает в каких условиях будет использоваться эта покрышка и будет иметь его работа успех в эксплуатации или нет. В противном случае у них действует свой закон, при котором можно лешиться яйцев ответив за базар. Логично?

      @viktorfahrenbruch2939@viktorfahrenbruch293926 күн бұрын

    • Какой закон???кому его тухлые яйца нужны???судя по условиям работы.там кроме грязных брюк ничего нет.купаются иакие люли 2ва раза в жизни когда рождаются и когда умирают.

      @tractor548@tractor54823 күн бұрын

  • This man is a master tire technician His tire repair are perfect And his skill is amazing God bless you all Daniel

    @DanielSpivey-dx3qc@DanielSpivey-dx3qc10 ай бұрын

  • Parabéns prá vc que trabalha duro Deus abençoe a sua vida continue dando saúde

    @josecoelhodeoliveiracoelho5851@josecoelhodeoliveiracoelho585110 ай бұрын

    • Не будь те идиотом, невозможно мног работать, и быть здоровым. Это индус, у них в индии индийский фашизм, адская работа за мизерную зарплату, "ремонтируя" эту покрышку он потерял значительную часть своего здоровья

      @Nekto-is-Proshlogo@Nekto-is-Proshlogo8 ай бұрын

  • I´m impressed, more in view if you have had tried to cut the material of such a tire. Forget our exaggerated requirements in Europe,. The world moves better on when this works fit. My respect for creativity and practical realisation under the given conditions.

    @gertneukirch1120@gertneukirch11204 ай бұрын

  • La verdad son unos SRS ARTESANOS COMO TRABAJAN MIS MÁS SINCEROS RESPETO BENDICIONES PARA TODOS UDS Y SUS FAMILIAS ASÍ SEA SALUDOS ABRAZOS PARA TODOS UDS

    @claudiosoto2447@claudiosoto24475 ай бұрын

  • Yeah the problem isn't that the guy didn't try to make it good repair the problem is that once the sidewall is compromised the strength is gone. Would be interesting to find out how long this tire lasted before the sidewall family blew out again

    @puncherdavis9727@puncherdavis97278 ай бұрын

    • I dont know how long it lasts but, this is obviously not his first repair.

      @magnusjonasson1987@magnusjonasson19878 ай бұрын

    • ​@magnusjonasson1987 For sure that's not his first repair. He is fixing the same tire ever other day!

      @rethinkyourself1@rethinkyourself17 ай бұрын

    • For an earth mover? I can see this repair lasting a long time.

      @ShadowsOnTheScreen@ShadowsOnTheScreen7 ай бұрын

    • Well it probably has a big, thick tube in it when mounted, I doubt it would blow out...if something happened to gouge it again in that exact spot, I suspect it would be weaker than the surrounding area and damage again more easily, but the odds of that are probably small...

      @dyer2cycle@dyer2cycle6 ай бұрын

    • I give it two days on a loader

      @richardradawetz8788@richardradawetz87884 ай бұрын

  • ไทยแลนด์ ยกย่องการซ่อม เยี่ยมมาก

    @keatisakdaroj9415@keatisakdaroj9415 Жыл бұрын

  • De Argentina un genio maestro un gran abrazo

    @josedanielmunoz8273@josedanielmunoz8273 Жыл бұрын

    • Love watching these videos. Just wondering, would it be possible to have a clamp on steel plate, front and back, into which you could inject molten rubber? You could place steel or kevlar matting to overlap the existing sidewall structure, then inject above and below through the steel clamped structure (thinking like a large sandwich press). Surely this would be stronger than multiple small pieces of thin rubber? And potentially a lot cheaper for nations of lesser income..?? Obviously I know very little about vulcanising, so this is meant as a question, and not a distraction from the works performed here.

      @smac4621@smac46219 ай бұрын

  • Süper oldu çok büyük bir sıkıntımız çözüldü gerçekten çok teşekkür ederim

    @mehmetozer4417@mehmetozer44178 ай бұрын

  • Amazing Retrade Excellent Service God bless you Brother. Great Effort.

    @velayuthamkanitha9103@velayuthamkanitha91036 ай бұрын

  • Jawa’s hard at work in the background. 😁👍🏼

    @trickysubject8563@trickysubject85633 ай бұрын

  • icadlar ihtiyaçtan doğar, çalışkan insanlar saygılar ! (türkish language )bravo nice work !

    @airfight10@airfight1010 ай бұрын

  • ما شاء الله تبارك الله عمل ممتاز جدا الأخوة باكستانيون أو أفغان وهم مبدعون في جميع المجالات تحية من اليمن

    @zizonajjar471@zizonajjar4719 ай бұрын

  • This is an earthmoving tyre, never subject to high speed. So while not ideal there is still a lot of life left in a very expensive tyre. This is often done in the western world as well. Done on truck tyres as well. Generally used on trailers however.

    @ldnwholesale8552@ldnwholesale85528 ай бұрын

    • Informative post. I did wonder how reliable patched tires are for heavy equipment. But you helped me understand that it depends a lot on how the tire is used. Thanks.

      @douglashairston7808@douglashairston780829 күн бұрын

  • Me encanta como trabajan estos hombres muy comprometidos con el trabajo aparte muy profesional

    @adanvaquero4445@adanvaquero44459 ай бұрын

  • Happy to see the man wearing mask while grinding. I would give him my safety glasses if he was near as the tire grinding throws metal and nylon fibers everywhere. Blessings, hard work. Much respect from me.

    @allamar9083@allamar90832 ай бұрын

  • الله يرزقك لانك فعلا مجاهد في عملك

    @AliAltaee-xk8fc@AliAltaee-xk8fc9 ай бұрын

  • Профанация...! Даже без перчаток))) я бы рядом с таким колесом не стоял и даже не ехал

    @user-ow1fo8ks4c@user-ow1fo8ks4c9 ай бұрын

  • would love to have some of that for things like atv tires, i am in the US and bought a tube of rubber stuff from over seas that you just squeeze out and spread, it cures fast and works good, looks like rubber and stays flexible, used it on some atv tire cracks, i still have some but was so happy with it i purchased another tube of it just to have on hand.

    @rottmanthan@rottmanthan9 ай бұрын

  • 모두 수작업으로 하는 모습이 인상적입니다. 휘일로더의 중량이 엄천난데... 옆면을 때워서 쓰는군요. 이 없으면 잇몸이라고... 상황이 닥치면 다 해결할 수 있는 방법이 떠오르나 봅니다. 대단하세요^^

    @mschoi2383@mschoi23837 ай бұрын

  • Je me lasse pas de regarder d admirer ces mecs si habile merci un régal !!!!!

    @gordanvidak8622@gordanvidak86224 ай бұрын

  • It’s common in the US and other developed countries to retread and repair tires for large earthmoving equipment - giant dumptrucks used for mining, etc. as long as the bead is not damaged, you can retread a tire many times.

    @jmcguckin@jmcguckin8 ай бұрын

    • The west is waste mentality 😊

      @harounsamadi2527@harounsamadi25277 ай бұрын

    • this is not retreading

      @duac4508@duac45087 ай бұрын

    • they are patching the tire, they arent rethreading

      @MTLJack@MTLJack5 ай бұрын

  • У нас пробывали ремонтировать, особенно кировскую резину (К-700), пластыри импортные закупали , но слабо она ходила, а потом дифицит сошел, копи деньги и покупай сколько хочешь новую и перестали. А на комбайны клеили, та подольше ходила.

    @user-sd9de3el6z@user-sd9de3el6z10 ай бұрын

    • О бедность бедность....в самарканде до 94 года жили....какие сопли лечили сопли с колёсами... .зашивали порезы боковые ето на жигули...а на автобусе ездили до проволоки......

      @arkadimich7329@arkadimich732910 ай бұрын

  • My younger brother worked in India for 5 or 6 years in the 1990s and he said it was amazing what an Indian worker could do repairing things, casting new metal parts, etc.

    @jeffingram9916@jeffingram99167 ай бұрын

    • These are Pakistani

      @sulaak@sulaak7 ай бұрын

    • @@sulaak His experience was working in India but the ability to repair just about anything extends to most of the countries in that region. I've seen other videos of metal casting of huge gears and the machining and polishing to the finished product and the skills are impressive.

      @jeffingram9916@jeffingram99167 ай бұрын

  • KERJA YANG BAGUS , SANGAT PROFESSIONAL , MANTAP ........

    @hen-hensuhendard5996@hen-hensuhendard599610 ай бұрын

  • Hello 👍👍 cảm ơn bạn đã chia sẻ công việc 👌

    @KimNgocOfflClAL@KimNgocOfflClAL10 ай бұрын

  • I can recall many years ago as an apprentice, getting a pink ticket from the large engineering company I worked at . This for operating a buff without its guard. This resulted in a fine, taken from my wages the following Friday. ❤

    @williamwarnold6737@williamwarnold673710 ай бұрын

    • Unions are great aren’t they

      @georgepaiva7496@georgepaiva749610 ай бұрын

    • Wow

      @mohammadafzal3040@mohammadafzal304010 ай бұрын

    • @@georgepaiva7496 My friend, six finger Sam didn't like Unions either, but now he thinks they do some good with enforcing worker safety.

      @Absaalookemensch@Absaalookemensch8 ай бұрын

  • 成る程、重機の低速用で更にチューブタイヤだからこその修理法ですね！ 素晴らしい☆

    @user-zq5yb5vl6s@user-zq5yb5vl6s7 ай бұрын

  • Excellent work! 😃👍

    @ScoutCrafter@ScoutCrafter9 ай бұрын

  • Such talented and hard working people. Masters at what they do

    @not.likely@not.likely10 ай бұрын

  • Parabéns ao trabalho desse excelente cirurgião borracheiro! Deus o abençõe!

    @ismaelaguiar716@ismaelaguiar7169 ай бұрын

  • Though am not an expert in this type of giant tyre repair, I guess that the bonding process with the taping tool plus the final weight press,heat etc,sure makes for reasonable job?

    @KimMorgan-hc3rk@KimMorgan-hc3rk9 ай бұрын

  • Saudações de Brasília 🇧🇷 caramba aqui no Brasil pneu assim e jogado fora.. ai no seu país tem concerto parabéns show 😊

    @cleniomartins8505@cleniomartins85057 ай бұрын

  • Тяжелая, но нужная работа. Респект мастеру.

    @alexandrsherbakov9878@alexandrsherbakov987810 ай бұрын

    • в чем она нужная? это шины уже не пригодный к эксплуатации по стандартам безопасности, эти люди - потенциальные убийцы, тк из-за их поделий могут погибнуть другие люди.

      @belooshee@belooshee10 ай бұрын

    • Фуфло это!

      @ramer31@ramer3110 ай бұрын

    • @@belooshee ерунду и бред пишешь. В СССР действовали десятки шиноремонтных заводов которые ремонтировалии шины для карьерной и другой спец технике где стоимость шин составляет значительную часть стоимости самой машины

      @user-gb6kz6qd3u@user-gb6kz6qd3u9 ай бұрын

    • @@user-gb6kz6qd3u então é por isso que a URSS acabou?

      @sergioperegrino5948@sergioperegrino59489 ай бұрын

    • Even if the reparation is solid, the rest of the tire looks like shit, it will explode for another side, this tire is totally finished and dead. Too much work for nothing, not worthy!!

      @mapefpada7681@mapefpada76819 ай бұрын

  • Povo que eu admiro de mais São extremamente trabalhadores

    @antonioribamar334@antonioribamar33410 ай бұрын

  • Great job. The repair will last for several years. Hope, someone pay good money for the tire.

    @LiquidScreen@LiquidScreen3 ай бұрын

  • 나는당신을 믿어요 ㅋㅋ 이런수리공은 볼수가없다👏👏👍

    @user-qe4zw9kx9l@user-qe4zw9kx9l10 ай бұрын

  • fantastico lavoro di riparazione, siete maestri nel riparare tutto senza mai buttare niente.

    @AsssFidanken@AsssFidanken10 ай бұрын

  • When the side wall of the tire is broken, you must not repair it. The tire may burst by strength lack.

    @yosihey9717@yosihey97178 ай бұрын

    • they dont go fast or go on hwy

      @peter-pg5yc@peter-pg5yc8 ай бұрын

    • probably not much air pressure, either...@@peter-pg5yc

      @dyer2cycle@dyer2cycle6 ай бұрын

    • It will be fine

      @craighouchins3116@craighouchins31164 ай бұрын

  • This man has serious skills! I would guess this tire is super expensive so it makes since to repair it the way he did. I wonder if he can retread tires as well?

    @smokeylovesfire1589@smokeylovesfire15899 ай бұрын

    • Side tires are not repaired

      @hornet99923@hornet999239 ай бұрын

    • Caterpillar monster tires is expensive and it's possible to rethread tractor tires as well.

      @Shsishsgsk@Shsishsgsk8 ай бұрын

    • not skilled .. that is monkey monkey do .. and totally out of control or standards

      @tellyonthewall8751@tellyonthewall87517 ай бұрын

    • Makes “sense”

      @IchliebeHunde58@IchliebeHunde586 ай бұрын

    • Great catch! Thx for showing me!@@IchliebeHunde58

      @smokeylovesfire1589@smokeylovesfire15896 ай бұрын

  • 하.... 2거보니 눈물2 다 난다. 멋진 솜씨에 경의를 표합니다.

    @shineprophet9161@shineprophet91619 ай бұрын

  • Os cara é fera mesmo.....

    @gilliard121@gilliard1217 ай бұрын

  • Тракторная техника имеет 1-1.7 атм давление чтобы в землю не тромбовать. А на фурах 8-10 атм эта тема не работает епнет и головы не будет. На легковых тоже самое скорость другая вращения и давление побольше около 2-2.5 атм.

    @rbhxtd4413@rbhxtd441310 ай бұрын

    • Не думаю что они это первый раз делают

      @aslan_grozny3667@aslan_grozny366710 ай бұрын

    • @@aslan_grozny3667 это тракторные колеса не на автомобиль если ты не понял

      @rbhxtd4413@rbhxtd441310 ай бұрын

  • I didn't know that repair existed.. congratulations for the practice,,

    @carlosmagnomota3928@carlosmagnomota392810 ай бұрын

  • muybuen trabajo y Gran artesano. deberias haber dedicado unos segundos mas para ver tu trabajo terminado. Saludos desde Aegentina.

    @ricardini7338@ricardini73388 күн бұрын

  • самое интересное в таких видео - это читать комментарии всевозможных лицемеров, которые в жизни не купили б подобные вещи, но всячески при этом их хвалят. У шины тяжеловесной техники на боковой стороне отсутствует металлический корд, но не беда, изоленту пару раз наложить и ремонт окончен. Можете с таким же успехом газовый баллон у себя дома изолентой или скотчем перемотать.

    @Istar_1990@Istar_19909 ай бұрын

    • Изнутри положили финальную заплату с кордом

      @dmitrynikolaev355@dmitrynikolaev3559 ай бұрын

    • При всём уважение, но резина толщиной порядка 2-3мм с основой(кордом), меня как-то смущает,папье-маше это здорово, но на грузовой технике это жутковато🥴@@dmitrynikolaev355

      @user-pb3uf7of4e@user-pb3uf7of4eАй бұрын

    • @@dmitrynikolaev355 корд это каркас, он должен быть цельным, а иначе это не каркас, где логика

      @sverhcom@sverhcomАй бұрын

    • Тоже первым делом подумал на он код восстанавливать будет.

      @user-cq3yn9de8k@user-cq3yn9de8kАй бұрын

    • Слушай умник эти ребята НЕПОБЕДИМУЮ СОВЕТСКУЮ АРМИЮ РАКОМ СТАВИЛИ а ПОСЛЕ и АМЕРИКАНСКУЮ без никакого оружия ДУМАЕШ ОНИ ТУПЕЕ ТЕБЯ ЧТОЛИ?

      @user-xf8le1im2k@user-xf8le1im2kКүн бұрын

  • Ele não está usando os EPI equipamentos de proteção individual, correndo risco de acidente, no mais fez um grande trabalho

    @CACADORES-DE-EMOCAO-FSA-BA@CACADORES-DE-EMOCAO-FSA-BA10 ай бұрын

    • He starts wearing a mask while he's grinding on the inside @ 1:30

      @c.j.cleveland7475@c.j.cleveland74759 ай бұрын

    • @@c.j.cleveland7475 it's just a rag mask it doesn't protect

      @crazyduck8755@crazyduck87558 ай бұрын

  • Paquistão, a melhor mão-de-obra do mundo!

    @paulohenriquedasilvaribeir1239@paulohenriquedasilvaribeir12394 ай бұрын

  • Excellent work, your hand looks like you are a very skilled person.

    @Iamlookingforwoody.....786@Iamlookingforwoody.....7868 ай бұрын

  • Интересно на сколько такая латка хватит😊

    @err0rmax239@err0rmax2394 ай бұрын

    • Такой латки может хватить лет на 100 - 200, но только при одном условии: нельзя накачивать 😂

      @provokator-x@provokator-x23 күн бұрын

  • good job,bro...very good job...we do do the same job . but easier...you have this skills,what we need..

    @svenfietz7919@svenfietz79199 ай бұрын

  • Bravo 👍. Impressionnant

    @ludovicguibert9864@ludovicguibert98648 ай бұрын

  • That tire is something I trust less than a politician

    @dubioushumor9243@dubioushumor92439 ай бұрын

    • Not me!

      @cooldog60@cooldog602 ай бұрын

  • The thumbnail picture is a con. That is a brand new tyre shown and is NOT even the same tread pattern as the one so called being repaired.

    @daveticehurst4191@daveticehurst4191Ай бұрын

  • I always thought you men were lazy. Because most of the time see you as owners operators at Gas station. My bad have a new found respect for you. God Bless💯🙏

    @molderskully1569@molderskully15697 ай бұрын

  • Wherever you see a guy with an eye fucked up, don't trouble your mind thinking abut what possibly could happen to him , I think this video gives you a definitive clue.

    @Old-Skull.@Old-Skull.9 ай бұрын

  • Perfeito!

    @betobeto9705@betobeto970510 ай бұрын

  • Čestitam vam na uspešnoj popravci teko velike gume!!

    @radaisakov4408@radaisakov440810 ай бұрын

  • Bade mehnat karte ho yaar aap sach mein kamaye koi khaye koi

    @shivarora7573@shivarora75739 ай бұрын

  • Good!!! Nice day

    @user-nq4wo7ti8i@user-nq4wo7ti8i10 ай бұрын

  • With a certain load, it's bound to blow out again. I just hope the driver and any cyclist on road doesn't get killed. Sometimes, "just because you can, doesn't mean you should" comes to mind.

    @jigglytofu@jigglytofu10 ай бұрын

    • Not a lot of cyclists in mines

      @jakesmith6337@jakesmith633710 ай бұрын

    • They do not live in the disposable/just buy a new one North American world.

      @johnstitt2615@johnstitt26157 ай бұрын

  • Bravo! Thanks!

    @hassanshayegannik155@hassanshayegannik1559 ай бұрын

  • Parabéns pelo maravilhoso trabalho

    @joseonofredealmeida2634@joseonofredealmeida26343 ай бұрын

  • if google stop adding those windows at the end of the video it'll be fantastic or at least gives us the option to remove it .

    @riqfez5468@riqfez546810 ай бұрын

  • I always wondered how this kind of a fix could be done. Now I know. Thank you !

    @donaldwycoff4154@donaldwycoff41548 ай бұрын

  • Looks good but....how safe is it really!.travelling at speed with heavy loads

    @alanwilkinson9487@alanwilkinson94879 ай бұрын

  • Техника на грани фантастики

    @russkiipatriot6773@russkiipatriot677310 ай бұрын
KZhead