Incredible Process of Metal Recycling | Factory Steel Production which Scrap Metal
2023 ж. 14 Қаз.
1 889 430 Рет қаралды
Incredible Process of Metal Recycling | Factory Steel Production which Scrap Metal.
Scrap waste recycling | waste metal recycling process | Steel manufacturing process | Recycling Process | Manufacturing Processes | Factory Manufacturing | Processes of Making | scrap to finish |
Metal recycling is process of taking waste metal, processing it and creating new metal material and other products . This recycled metal can be used to make metal products. There are many advantages to recycling metal in factories.including environmental benefits as.
follow us at Facebook:facebook.com/profile.php?...
#metalwork #scrapmetalrecycling #recycling #amazingskills #recycling #wasterecycling #metal #wastemetalrecycling #processofmaking
If working with molten metal in sandals was a sport, these guys would be in the Olympics
I think you would be right....
Good thing there steel toenail sandals 😁
Orang orang yg sangat handal dlm pekerjaan
Safety glasses anyone🤓👀…gloves…apron…?
A few didn't want to wreck their sandals. They were barefoot!!!
There were so many unsafe practices but the brother spray painting with no mask at the end took the biscuit
Nothing like a little punjab primer at the end of a hard day, or at the start of it
@@warwarneverchanges4937😂😂
@@warwarneverchanges4937a primer a day keeps the doctor away
How about the opening of the furnace where a worker could fall in ?
I did that for a year (UK) cause the bosses were tightwads. The UK was just as shit in the 1970's.
I’m sure someone has already written this comment, but….. I am simply blown away by their work attire… FRIGGIN BAREFOOT!?!?!?! Someone should do a documentary on all the workplace injuries and or deaths that take place is such work environments
Zero injuries.
На сто процентов тебя поддерживаю! Охраны труда нет! Техники безопасности нет!
What is the life expectancy of these workers. Are there unions?
Bullshit@@sajibrahim2355
You Jealous 😂😂😂😂😂
Загрузка в печь вместе с мешком - это прекрасно. В целом культура производства впечатляет. Работают с расплавом в резиновых тапочках. Бля.. не, ну может люди там почти бесплатные и нового прям за забором возьмут.. но сразу видно - о ТБ там даже не слышали. 9:28 биение поражает воображение. Т-точность. Покраска - вот прям видно, как "на отъебись" сделано. Не, ну в самом деле, зачем красить кожух с двух сторон, да? Да и под ним - тоже излишне. Да и вал с крыльчаткой прикрывать не надо, херачьте прям по ним... Удивлён наличием подшипников и манжет, после увиденного всерьёз ожидал применение промасленных тряпок для уплотнения..
там просто не все показали))) Биение и точность наше все..точнее их))
Да на качество им скорее всего пофигу, ибо платят копейки, а пахать дохрена приходится. Плюс к тому же о каком качестве идет речь в подобных условиях? У нас на заводах с браком делать умудряются, а тут "на коленке". Но вот ТБ - это то, что меня удивляет каждый раз, когда я смотрю подобные видео. Им вообще, наверное пофигу на себя. наверное они терминаторы, а одежда сверху чисто, чтоб причиндалы прикрыть. Иначе я не могу это объяснить их поведение.
@@user-yy7fi4hv5r полагаю дело в том что нам есть с чем сравнивать а им нет. И потом, это мануфактура образца середины 19 века, и работягам не до жиру а быть бы живу. Платят копейки? Да работяги и этому рады, иначе бы в сланцах чугун не отливали.
Удивлён керамическим сальником, он довольно дорого стоит, даже китайский. И зачем торчит вал со стороны вентилятора? Про гроверы на болтах они похоже не слышали.
@@user-yy7fi4hv5rвозможно у них просто понятие ТБ отсутствует впринципе. Т.е. им никто про это не рассказывал и сандалики- просто норма, везде так.
Just crazy that such a workingplace still exists in the Year 2023. I do not want to know how many people are injured each week in this "factory", and when they die due to destroyed lungs or cancer.
probably none are injured because they watch what they are doing, don't have a nanny (osha) watching their every move, and they are not stupid like European and American workers.
@@JimNichols Sure you can "watch" if suddenly some molten iron droplets are ejected from teh furnace and land on your bare feet are on other parts of your body. But you can do nothing as this happens faster as you can escape. Its a great feeling when 1000°C hot metal find its way through your flesh till it reaches the bone. And if you are really that stupid: You cannot see deadly gases, you are just dead when you inhale them. Or you have long term effects due to them.
@@JimNichols I guess you have no clue on how many people have gotten brain cancer from these paints they are using without proper protection .....
@@JimNichols See kids, comments like this are a symptom of breathing spray paint and furnace fumes all day. "Modern safety standards actually cause injuries" absolutely wild.
Понравилась запрессовка подшипников😮
Хорошо хоть не по наружной обойме стучал.
а как прекрасно выглядит тест помпы грязнючей,ржавой водой.Как раз,пока до заказчика доедет,уже со ржавчиной внутри будет...моё почтение
It's really impressive how in quite a rudimentary workshop these guys still manage to push out a great looking final product. It undoubtedly takes quite some skill, especially the winding of the motor looked super impressive. It clearly works, it would be pretty cool to see this happen in real life, thank you for posting the video, keep doing what you're doing :-)
My father bought the same motor 40 years ago for our well. My brother have the same motor till today functional.
the accuracy of that lathe is measured in cm, look at that piece wobbling in there while being drilled out.
Cm? !!! Inches Hahahahaha
This would have been bored out to size afterwards, which the narrator didn’t mention because he clearly had no clue what was actually going on.
i noticed that also .it was like the chuck wasnt tightened 0r fk smooth wore out .lol
С такими рукавами на токарном станке можно и без рук остаться😮
Волков боятся в лес не ходить 🤔
Работодатель там даже не обеспечил работников индивидуальными средствами защиты(маска, каска, спецодежда, сапоги, перчатки итд). А про нарушения ТБ во многих моментах вообще молчу. Как они вообще до пенсий доживают, удивительно
Да у них и обмотки статора на глазок намотаны... Примерно
У вас комментаторы ценизм, это в вас советское прошлое говорит. А не будь у нас СССР 70 лет было бы то же самое. И сейчас мы по уровню к ним идём.
@@PRODlK473у них производство в каждом сарае. Нам до них развиваться и развиваться.
Спецуха у них самая подходящая для таких условий, особенно спецобувь, сандалики для этой работы прям отлично подходят!!!
Зачем им спецуха? Удобно и не жарко.
У них денег нет на спецодежду. А работодателю плевать на здоровье рабочего. Травмируется - следующий. Кристальный чистый капитализм.
Health and safety would have a field day with this
The teapot manipulation was superb.
You'd need a 64-bit number to count all the workplace safety violations in this place!
Not really. Those are for wimps.
Удивительно, ни одного человека на костылях с гипсом на руке обожженного и без глаза.
Таких видимо увольняют и берут на работу новых, не коцанных )
We have to admire the care they take with employee safety. Who needs hard hats, boots or thermal clothing to work with molten metal?
Americans are to blame for this. They got fat lazy slow and infatuated with being overly clean
You left out eye protection, ventilation, and no loose clothing.
Safety regulations are in developed countries, in 3rd world countries, people use brains to stay safe 😁
Why would the need hard hats other than to make you feel less scared?
@@adilsm2338 If people used brains they wouldn't be a 3rd world country in the first place.
Если этих работников перевести в настоящий завод, то преставьте какое КПД будет у этого завода. Они просто молодцы
A nice mix of metal of different origin, mainly cast iron, composition to produce the same !
id like to see the youtubers donate a couple pairs of boots/gloves and respirators to the plants they visit
Great idea, next time I will do it
I would agree if they weren't using a smart phone.......
It's not about money it's the awareness which is required
Жизнь в этой стране уже приключение! Как они доживают до детородного возраста вообще вопрос без ответа.
У них этот возраст начинается в 11 лет, и совпадает с началом трудовой деятельности. Высокая смертность среди мужского населения компенсируется многоженством и многодетностью. Человек такая скотина, которая приспособится к любым условиям.
А металлом откуда ...не от нас ли
От вас конечно. Из Одессы грузят@@user-zs9nt6ns9y
C Американских стран, Великая страна как АСАШАЙ не может свои отходы переработать.@@user-zs9nt6ns9y
Ближайшее будущее запаребрика без технологий , без инвестиций , без ума и человечности !!
Мда.. Там вибрации на станке просто жесть, о какой центровке может идти речь😂
Допуск в +- миллиметр видимо для их целей достаточно. Кондовость конструкции компенсируется дешевизной. Это же не лазерный проигрыватель где микроны.
Не смутило что нет не граверов не шайб. Он сам раскрутится от вибрации и самоликвидируется😂
@@andrey3958"самоусунется", зацепив того, кто будет рядом.
Love the safety precautions, carrying molten metal waring sandals, I know it’s 125 degrees in the shade there but geez.
OHS at it’s finest.
8:50 Gotta LOVE the teapot tech. Awesome!
Impresionante,de verdad, que en condiciones tan precarias de trabajo éstos seres humanos sean capaces de construir estás maravillas,tan útiles en la vida diaria,mis respetos para éstos hombres y para quien se le ocurrió filmarles este video, Dios los bendiga y ojalá premie su talento.
Them steel toe sandals offer the best protection
I wonder how many feet get crushed and metal gets shoved into the feet some of these places they dont even wear sandals
Safety first and hand made quality !
They work so hard. God Keep them safe .
The only one keeping them safe is themselves.
Barefoot in slippers and 1000°C. The bravest people in the world!
Don't confuse ignorance or foolishness with courage....
Nope. Just ordinary guys trying to eke out a living.
Mis respetos por estos trabajadores. Su tarea es tan importante como sub valuada. Es admirable ver su desempeño en condiciones de trabajo que no son las ideales y máxime, en lo que refiere a seguridad. Imagino también que lo hacen por salarios exiguos... En fin. Saludos.
These are real workers, real heros.
Did you notice that some of the machinery was made in Keithly England. Manufacturing in the UK would have been like this is 1800’s. We in the UK don’t make anything anymore.
Probably most are from the time GB was the leader of most countries and GB left it there.
That's when England made things of quality, that lasted.
Чайник это конечная рецептура =)
Всё выполнено на корточках. Как будто-то люди никогда не видели мебель.
Ня это тоже добивает! Можно же столы и стеллажи сделать, не издеваться над людьми
Wow! All these world-famous super high skilled professionals in one place in action. It must have been an international event, where they showed their talents in front of an astonished pulikum.
I am really happy to see you here.thank you so much
كل التحية والتقدير لإخواننا المسلمين الباكستانيه والافغانية 🎉 أحسن الله اليكم وبارك الله فيكم
No Afghan these guys from Pakistan
I’m amazed that every person still has all their toes
Может не у всех есть пальцы.
Car personne ne fait un travail à la chaîne, c’est des artistes. Les gens se blesse plus à la chaîne car c’est automatisé presque
This is Just Amazing. 😀😀😀😀😀
Техника Безопасности? не! Не слышал! На первом месте план!
Good to see health and safety is alive and well.
The fact that's a man-sized hole is absolutely terrifying
Haha, the furnace pit was terrifying. No rail or anything. But at least there werent any children working here (the segments watched)
@@komnishura Some days before, there were children, but they inexplicably disappeared. Not even their parents know where they have gone.
@@horstmuller7512ցտվգ գ ցֆըբ
Very talented men do everything manually. Rare sight nowadays. Cheers from Srilanka .
Nice, clean and safe factory.
Admiro esse trabalho 😊
I done such in school , very nice winding, metal recycling , this is more sustainable then buying new , planet earth has limited resources. ❤❤❤❤
вы в школе переплавляи метал и делали корпуса асинхронных двигателей? а потом ещё и обмотку сами мотали? вы молодец
Incrível 😊
Эти чудные индуские технологии. Закручивать болты в отверстия без резьбы это что то. Биение якоря там на глаз определяют, крутиться и пойдет.
кому надо- тот нарежет, им не надо.😀
Молодцы 😊
Such a great Pleasure watching some one Make by Hand the Very same Castings I produced by Machine. Getting the fin's on the Electric Motor was always a chore. I also Solute and Respect the People pouring Molten Iron in Sandals. Thank You for you video.
It’s great pleasure for me you liked it,you made my day.thank you so much
Impressive. Most Impressive
Muy excelente lo que hacen muchas felicidades y bendiciones 👌 saludos desde Colombia ♥️😊
Son increíbles como trabajan… 👏👏👏👏👏
My Epic Admiration for all of you brothers…Blessing of Skills ….
Скорее всего на том свете они попадут в рай , в аду они при жизни были .
I want to see the part where they spill the molten metal on the floor and all over their fireproof insulated open toe slides. Must be a great video!!!
Great suggestion!
you probably see this on a g.o.r.e. site :P
I am not an OSHA fan…..howwwwwwever,they do serve a purpose.
Hard skilled workers with one foot in the grave.
Perfect style of video making
Much respect.
Send these guys back in time to Thomas Edison and Westinghouse, they would blow their minds.
not sure about the flip flops for feet safety and no eye protection, great work but very risky
I'm just impressed they built what looks like a whole-ass blast furnace complete with skip cars and tuyeres.
This is the craziest thing I’ve seen in weeks. Holy hell. I wonder if there are hardly ever any injuries because they have learned to be extra careful or there are a lot of injuries due to lack of safety equipment and procedures. I can only hope these hard working men are paid more than 10 Rupees a day.
Leaving aside the safety concerns, it's amazing what they can do with how little they have. We couldn't do it. We in the West have grown soft and entitled.
yeah, it's 'soft and entitled' to have hard shoes and eye protection
Wut?
Excellent 👍👍👍
The design of the safety shoes is well noting!
Nicely done🎉
When the world turns into Mad Max, I’m going to India. They are amazing.
Os CARAS são ESFORÇADO beleza GOSTEI valeu ok.
Respect workers!
Very hard workers❤
Very good nice 👍
❤Nice 😊😮
الحمد لله على كثير من نعمه التي من بها علينا❤❤😢😢😢😢 اللهم وسع رزقهم❤ و اعطهم القوة❤ و الصبر ❤و ارزق كل فقير يا الله😢😢
Адская работа.
Excellent skills 👍
Alll Hand made.. salute Time 13:57 ... worth watching there struggle.
السلام علیکم ماشاءاللّٰه ماشاءاللّٰه ماشاءاللّٰه ❤❤❤❤❤
BHP pierwsza klasa...Ciekawe ilu juz tam wpadło do tej dziury...🎉🎉🎉
One shop should not do all that. Lots of quality standards are lowered. The motor may last a million years or short out 10 minutes into a work load. To bring value up there needs to be checks on the material and the machining. Adds maybe a few hours and possible tossing out a few out of spec parts, but the result is better product
Your opinion is excellent I agree with it Thanks a lot for watching the video
I couldn't believe the wobble on the lathe, while and after he drilled the center hole!! That's terrible machining work!
Молодцы! На коленках, с босыми ногами и голыми руками всё технологично и профессионально! Я честно удивлен 👍
профессионально? Ты явно офисный планктон и в производстве не рылом.
Полная хуета, а не производство
Really cool stuff. I watched this Japanese plant video, with everything high tech manufactured. This is like the complete opposite lol. But hey whatever works. I respect you.
That was F***ing AWESOME!!!!!!!!!!!!!!!
QUE DEUS OS ABENÇOE SEMPRE AMÉM
BuSay what you want about safety standards. But These guys are doing what needs to be done. They prolly enjoy doing the work to.
Crazy an we be needing these parts like crazy
Молодцы труженики я вами восхищен!
Да,тяжелая у ребят работа.
Mast banaya hai bhai ne
Wow! I'm wordless
Unser Arbeitsschutz hätte seine helle Freude an dem laden 😂😂😂😂
Hans du alder Halunke! Hast du mit Wolfgang Tamam Moruk Sikim endlich deine Zauftour jemacht?
Barefooted in pajamas, hey ya'll let's go melt metal and make some shit.... Hold my beer!
Wow bro great Job😊
Запуск конечно эффектный, но учитывая низкую точность изготовления-на какое расстояние он сможет протолкнуть воду по трубе? например если его использовать для перекачки воды к примеру по магистрали длиной в километр, осилит он? Вряд ли.
1
Почему низкая точность? Примерно так и происходит литьё чугуна на производстве. И точно так же обрабатывается режущим инструментом. А "протолкнуть" это параметры на таблички насоса выбиты так же как и мощность двигателя. Судя по размерам колеса и улитки характеристики примерно 150-200 м3/ч, напор не больше 30 метров. Двигатель не больше 30кв/ч, только смушает что это насос серии К по стандартам РФ не имеет промежуточной ступицы, передний подшипник больше 2 лет не проходит при постоянной работе
@@user-gz3zg3pw6o Подшипники скорее всего переживут двигатель, особенно с учетом изоляторов из обложки журнала, ручной намотки и поливки лаком из чайника, без погружения в лак (про вакуумирование уже молчу). Хотя наврятли подшипники долго протянут без балансировки вала и крыльчатки. Эти насосы скорее всего для полива полей используют.
@@XLegion_ разбирал как то эл двигатели целую гору советские и чешские на медь, совершенно исправные, проработали около 40 лет на насосах, 75 kw, так вот в них вобще лака не было ни грамма, цвета горелого не было, запаха характерного тоже. Изоляторы правда были и бумажные и стекловолокно на разных движках. А на мелких kw 10-30 почти всегда лак но тоже не во всех
@@XLegion_ага, особенно после запрессовки зубилом
The thought of some OSHA executive clicking this video and watching it makes me smile lol
No safety boots,no gloves n no worksuit this life no balance 😢
Mashallah Pakistan 🇵🇰 zinda bad
Salute you guys
Панове Ви Точно Круті
Сумасшедшее производство.Не могу поверить, не ужели это происходит на планете земля
"Это тебе не Земля и не Африка, родной. Это планета Плюк, галактика Кин дза дза в спирали. " (С)
good job man
when i win the lottery each man here will get sone cash and brand new high quality protective gear including boots and safety glasses. respect to these people
the the person who wears that gear is slowed down so much he gets defooded and someone who is prepared to work at the pace of the foundry/factory gets the job and the food. Remember, until the 1960s or so this was the standard way of working in factories, and had been for hundreds of years. And even today, its only really western nations that have the extreme health and safety. The main reason is in western modern society the high value we put on 'life'. Throughout most of history, in all countries, a person was considered quite cheap, certainly not worth encumbering with protective gear that slows down the work process. People are cheap and replacable, factory production is not. Its only since the 1920s or so in a small numbers of first world countries this concept of 'valuing' life has become a thing and it has got bigger ever since, to the point where zero workplace injuries is now the expected norm - in the 1960s, a factory with under 2% annual employee DEATH rate, or a workshop/construction side with under 5% death rate, was considered acceptably safe even in the West.
@@Debbiebabe69PPE gear like boots, safety glasses, hearing protection etc doesn't slow down production. What slows down production is when a skilled worker gets seriously injured, requiring time to find and train their replacement.
@@mikesantos011 The things you mentioned are generally uncomfortable, and being uncomfortable is the number 1 way of slowing down production of a human.
@Debbiebabe69 nobody is going to get fired for wearing steel toed boots and safety glasses, those don't slow you down.
@@Debbiebabe69🤡