Vehicle for Special Tasks - Hydraulic Bucket BuilD
Skid Steer Tracks Build - • Making Skid Steer Tracks
Bestarc Plasma Cutter - amzn.to/3x5faNv
Mag Drill - s.vevor.com/bfQToS
So welcome to the next part of building a homemade mini skid steer.
This time we made a multi-purpose bucket that will be very helpful in this construction.
The whole thing weighs about 100 kg. The bucket's pressure is approximately 500 kg.
Hydraulic cylinders have a travel height of 100 mm.
The blades have dimensions of 110mm x 12mm.
The width of the bucket is approximately 100 cm.
• Making Hydraulic Power... - Making Hydraulic Power Unit
• Cutting Steel easier t... - Cutting Steel easier than you think - Use Wiper Motor
• Making revers trike to... - Making Revers Trike to have fun
• Making Hybrid Stump Gr... - Hybrid Stump Grinder
Skid Steer Tracks Build - kzhead.info/sun/krNrj7tlgpOGnI0/bejne.html Some tools we use :) Impact wrench - s.click.aliexpress.com/e/_Dmm4Hzr Bestarc Plasma Cutter - amzn.to/3x5faNv Mag Drill - s.vevor.com/bfQToS www.amazon.com/shop/madeinpoland
Qp
Pcd57
No commentary, no background music Just pure skill and hard work That's all I need.
Can't wait to see the final build on this project. The quality in your builds is outstanding !! Great job :)
Марсоход? Без проблем. Луноход? Ещё проще. Нет таких слов выразить восхищение его мастерством. Всего самого наилучшего мастеру.
Bardzo dobra robota. Czekam z niecierpliwością na kolejne etapy w projekcie 😊
Clearly one of the best steel fabricators on KZhead.... well done Sir
Half Polish half Ukrainian here. Enjoy seeing this work being done. Reminds me of my father. Looking forward to seeing it working.
Our favorite Polish guy just out here being the Master KZhead Fabricator.
Quite the clever project I am always impressed by your designs. I must admit to thinking those cylinder pin attachments look a bit weak to my eye. I am a retired professional engineer. The highly stressed sharp corners and welds are prone to fatigue cracking due to the resulting stress concentrations. I guess you will know soon enough if it is adequate once you get it up and running. Looking forward to next video.
Kanał lepszy niż te frizy i inne czjniki❤
great work! proud of my Polish brothers who are doing remarkable work! I can't wait to see what happens next ✌️✌️
it looks reliable and high quality, I'm impressed 👍
Я не видел ни чего подобного ни где. Только здесь возможны такие технологии. Браво, Браво!!
Trochę brakuje sztywności w tej łyżce. Widać to przy testach siłowników. Może warto dospawac na bokach jakieś wzmocnienia. Powodzenia, świetny projekt
Dokładnie, warto wzmocnić bo będzie później problem.
Wzmocnienia zawsze można wspawac, ale to wyjdzie przy testach praktycznych 😉
@@MadeinPolandChannel No na tym etapie to nawet wskazane, żeby nie dokładać kilogramów jak trzeba co jakiś czas przenosić wszystko w rękach.
@@MadeinPolandChannel Jak najbardziej. Miniaturka wyszła ciekawa. Łyżkę można by w kompie zmienić na kolor by przykuwała oko. Wyświetleń bedzie więcej.
Łyżka fajnie zrobiona z pomysłem wzmocnij boki płaskownikiem 5mm wraz z uchwytami uszy otwierqnia powinny być z blachy co najmniej 10 mm . O za tym reszta świetnie zrobiona
Making 4 in 1 Bucket for Skid Steer Loader...very useful and inspiring...always success..Greetings from your friends Bandar Alay Heavy Equipment 🇲🇨🌼❤✋👍
I know the price of steel isn't getting any cheaper, but for a bucket of that size, your cross sectional thicknesses are very light. Without an actual reference, I'm guessing most of the body is made of 5~7mm. The reinforcements are good design wise, just not heavy enough. The biggest redemption is the Hardox sections; treated with respect, they'll outlive the rest of the machine, and maybe a lot of us.
Add a gusset to the bottom, moving edge of the jaw, make like a triangle shaped box out of the entire jaw. That will keep the bottom jaw from bending forces when you are trying to pick things up and back dragging with the jaw open. I have seen many buckets fail into a U shape that did not have that reinforcement. I would use a 25mm x 50mm tube laid flat on the bottom about 1/3 of the way from the back of the jaw, then lay plate down over that to the cutting edges on both sides.
I've been a subscriber for many years-and it's great seeing you challenge yourself more/more as your skills increase and you become more creative. Looking forward to the next installment. Well done as always and a 👍 God bless.
Великолепно получилось
Side plates should be thicker, other than that great design💪💪💪
Man, you are a genius, congratulations on the work, it was incredible.
Very nice job. What a handy bucket. I may have missed it, but it looks like you only have hardox on one of the jaw edges. Scraping with the front inside edge is very handy and will need hardox and it's good for long term wear from grabbing rocks and concrete.
⭐⭐⭐⭐⭐ from Portugal ,for you(Made in Poland).
Good, you're going Skidd Steer Quicktatch on the bucket attachment. That's gonna save you headaches when you're switching implements.
Helluva pinch point. OSHA would have a field day with this one! Haha. Great video. Cheers.
Idealnie! Coś na noc ❤
Chylę czoła i czekam na efekt końcowy👏✊️✊️
Super się to ogląda,jakby to było takie łatwe❤
Elegancka robota. Nie do końca wiem po co w czołgu ładowarka (po poprzednim filmiku było wiadome, że budujesz czołg, ta ładowarka to tylko do algorytmów jutuba, wszyscy to wiemy), czekam na następne etapy projektu.
Nie ma o czym mówić - fach w ręku 👍🏻 Robota robi się sama 💪 Super sprawa
Proponuję dołożyć boczne lemiesze i wzmocnienie wzdłużne w dolnym poszyciu żeby łyżka nie klinowała się w urobku 😃
Good job mister beautiful project well done
Another great build, I'm so impressed !
Thanks!
Realmente tremendo tu ingenio . Mis felicitaciones 👏
Отличная работа 👍
You pretty Good 👍
Excellent, as always, thanks for sharing. Cheers.
I want you to invent a hydraulic excavator❤
Za jakiś czas pewnie powstanie home made excavator 👌👍👍.
looks like a beast love it can't wait to see the rest of it
Good stuff as ever. However, given that the bucket is not super heavyweight but clearly has some beefy rams it's normally good practice to use a flow divider to split the hydraulic oil evenly to each ram. Over time one ram will be easier to operate than another and then you end up with a torque effect on the pins and support structures.
You are a magician.
Fantastic work, dude! Really well done!!! 😃 Stay safe there with your family! 🖖😊
Like what you do. You might try turning the tracks around Pointing back the traction is spread. I hope you understand what I am trying to say.
What a build bro!!!
Thanks buddy! 😉
UAOOOO 🤩! DARUZ sei sempre un GENIO. Adoro i tuoi video
No będzie super maszyna, masę pracy masz. Pozdrowionka
Również pozdrawiamy 😉
Super robota. Przydałaby Ci się wycinarka plazmowa CNC :)
Ale jesteś gość. Pozdrawiam z Podlasia
Pozdrawiamy z Podkarpacia 😁
@@MadeinPolandChannel Fajnie wiedzieć że mamy tak świetny kanał z podkarpacia Pozdrawiam ze Stalowej Woli
Really enjoy this channel and its builds. No irritating music and good old fabrication and engineering. With your bucket serrated side edges will you be reinforcing them, heat treating or hard facing them? They will wear quickly when lifting logs or clearing rubbish
MM77 Approved 👍🏼👍🏼
Awesome job man! greetings from finland!
Hi , congratulations, great job is coming really well 👏🔝👍
amazing work man! perhaps reinforce the sides with another layer? looked like it was bending a bit :)
Well done,keep improving💪😎👍
Free Indonesia 🇾🇪 mantap 👍👍👍 .....
Czy te przekładnie użyte do przeniesienia napędu dźwignią temat🤔 bo projekt idzie w masę? Robota profesjonalna👍
Mmmm SketchUp 2016 :)
Good Job as always
Big job.
This is nice!
🔥🔥🔥🔥🔥 good job 👍
Great work sir you are awesome ❤️ 😊😊❤
Those drive motors will not last long. Otherwise excellent channel Thank you 👍
Nice plasma i bought an Arc Captain that seems to be on reverse polarity.
WoW What a Video Hermosa Linda ❤❤❤
Wow❤❤❤❤❤❤
Amazing
very interesting
Moim skromnym zdaniem scianki w których zamocowany jest siłownik krokodyla są zdecydowanie za cienkie ale może przez zmniejszony gabaryt całości będą wystarczające jednakże najlepiej to jeździć obserwować
❤Nice
Good morning and congratulations on the project . Could I please know from which website you buy the Oleodynamic material? Thank you and good work.
Top 🎉
Very nice! Why did you not build the frame first?
Genial
와우~^^
Damn bro, you have been busy since the last video. This is turning out really nice. Do the sides of the bucket need to be strengthen? Thank you for taking time to build, film, edit and post this video.
Blachy troche cienkie do tego zastosowania. Pomysl ciekawy.
Very light weight for a skid steer
norseman bits? cant imagine what else went through that and survived.
Having hydraulic lines on top of the bucket is the biggest fail, that’s exactly where rocks end up when they roll over!
The sidewalls are weak, dude.
Nie wiem czy 3mm to odpowiednia grubość stali na łyżkę... chyba że to będzie model ładowarki. Pracuję na podobnych maszynach i stal o grubości 3mm jest stosowana jako osłony elementów. Obawiam się że ta łyżka będzie pierwszym elementem który połamiesz podczas pracy
Co możesz powiedzieć o tym kluczu udarowym z którego używasz polecił byś ? Pozdrawiam
Mam go dość krótko, ale co mogę powiedzieć, to mocy mu nie brakuje. Jest dość ciężki i masywny. W tych pieniądzach ciężko byłoby kupić coś innego.
@@MadeinPolandChannel dzięki Pozdrawiam
Need 3 8th in steel.
What was this white thing that was poured on to drill a hole
Impressive! What are the specs of your hydraulic system and engine?
Kawasaki V petrol engine 21 hp. The hydraulic system is partially designed, but I will probably have to test different hydraulic pumps.
@@MadeinPolandChannel Ok. I've thought about making a mini skidsteer and similar things for some time and your design(at least so far) has some of the ideas that I've had. Is this going to be a walk behind or ride on unit?
As soon as I saw the mag drill I thought “That’s not happening and if it does that’s not Hardox 500”
❤❤
What is the odds of seeing a Route 66 historic street sign in a Made In Poland video? Do you guys also have a historic highway numbered 66 there as well!
Hej co to za program na samym poczatku filmiku fajnie wyglada. Pozdr.
SketchUp :)
Nie za słabe będą te silniki?
3:07 , а глаза запасные есть? В аптеке продают? Очки защитные просто необходимы!!!
👍
У знакомых заболел хомяк - лежит не встаёт, голову поднимает и роняет, не ест ничего. Оказалось, весь день прятал за щекой здоровенную гайку - вещь-то хорошая. Но, падла, тяжеловата для хомяка. ))
Жёсткости нет... Сделано хорошо, спору нет. Но с 2йки ковш... Маловато
А не знакомы ли вы с автором канала " workshop from scratch"?. Вы делаете одно и то же , вслед за друг другом. И , по моему, он тоже из Польши 😅.
👍👍🚜
👍💪✌