Clicking noise coming from the front end of your car or truck? How to diagnose CV axle problems.
Shop for New Auto Parts at 1AAuto.com 1aau.to/c/84/bp/axles-and-axle...
Can you hear a clicking noise coming from the front end of your car or truck? In this video, Andy shows you how CV axles might begin to click, clank, or clack when they have problems! CV axles and driveshafts have an intricate set of moving parts that allow them to deliver power efficiently. But sometimes, the protective boot that covers the joint and contains the grease can get poked or ripped. When that happens, the joint can go dry, or get filled with dirt and sand, which can ruin the joint and make lots of nose!
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
For More Info visit us at 1aau.to/h/c5b/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
May you guys please do a tutorial on how to install fog lights on a 2008 nissan sentra that does not have any
Repent to Jesus Christ “The next day John saw Jesus coming toward him and said, “Look, the Lamb of God, who takes away the sin of the world!” John 1:29 NIV hh
Do you ship to Canada?
Probably the happiest mechanic on KZhead. Just loves his job. My truck is just in the shop for new CV Axles & Hubs. I had a clicking turning hard left which escalated to a bad clucking. The CV Axles were missing the rubber boots for two winters now. Thanks for the informative video 👍
I like the way you calmly explaining all the stuff about cv joints. Great video.
Great diagnosis scenarios, I used 1Aauto videos and parts to fix my 2000 Honda Odyssey and now going to fix up my 2009 Honda Civic CV, Struts and shocks once the weather gets better here.
This is the best online auto repair instruction I've seen. Very clear and easy to understand and see all the components. Nice job, thanks!
As always a well done, informative vid. It's a good time for a wheel alignment, after installing an axle.
If you want to hate life itself, try doing a passenger side Sienna CV.
Hahaha, true
OMG you are not lying! I had to cut the thing in half with a special blade, then I had to remove the cv race housing and take a sledge to romove the center bearing.
@@hatsunemikufan4 ha! i just had to do the exact same thing in a Highlander AND use a heavy duty impact hammer.... spent 3 days with car on blocks trying to get that axle out each night after work... until I finally cut it in half
Why is it so hard? 😂😂
I'm truly impressed that you called that a simple job, haha...
Always love your guys shows, I haven't done one of these yet, but I'm sure I'll be able to now, when I need to, for now I've a big, powerful battery powered impact wrench! Thanks Fella
What is the brand of your impact wrench? Bro?
Great vid. I have installed cv shafts, never took one apart. Since I am in there, I change the axle seals (I wish there was just one axle seal design and one tool). Mainly because I don't want to go back in again. You make it look so easy. Anytime I go under a car, something is seized, strut bolts, shock bushings, the cv joint itself in the way of the break caliper bolts or hub bolts etc. 5hrs to change hub, CV axle, strut to coil over. Murphy always shows up @#$# shock bushings. Don't get me started on shock bushings. Saw you video on that too.
I just had our local garage replace both front axles in my 2016 Dodge Ram 1500 within the last two months. Unfortunately, last Saturday I had a complete axle failure while on the highway 20 klicks from home. I was able to limp home and get the truck into the garage on Monday. We found out that the tripod joint had failed, and the failure had nothing to do with incorrect installation as I originally thought. A brand new axle failing.. interesting. Your video is very informative and helpful, thank you.
It’s my first time here…great video. Even I understood completely the job that was done….Not too bad for a girl that know nothing about cars.Thank you for this video.you are a great teacher
I had a 85 ford Taurus with 150,000 miles on it and the cv axel was popping and clicking really bad but i couldn't afford to even buy a used axel so i tried something to see if it would keep it going a bit longer, i got a can of insulation foam and i filled the cv boot completely full of the foam and i let it dry over night, i ended up putting 150,000 more miles on that cv axel so it was original with now over 300,000 miles on it and it was still going with no noise, that insulation foam works really good by filling in all the loose areas and keeping the dirt out, give it a try and you will be amazed
I have the clicking noises right now, and this video just came on my suggestions! Coincidence?
If you get the clicking noise, don't put this repair off. Driving in this condition for a prolonged period can cause transmission damage, or it can leave you stranded, and damage other parts. My front differential snapped and I had to find a replacement for that. It could also cause a bad accident if it goes completely while driving at high speed. Also, spend a few bucks more for original equipment. I got Motorcraft replacements for about an additional $50 total. Do noth sides at the same time. Parts and labor for the half shafts and used front differential was about $1000. It probably would have been $2500 at the dealership.
Great job. Very informative. Thank you.
Enjoyed your video, I have clicking sound when I turn either right or left, I will be taking it to the shop because I live in a apartment complex, really no where to do the job but now I know....good feeling to know.
Very good & detailed demonstration. Thanks for sharing
Very informative. Do you have or have you considered doing a video on a popping front end of an F150 ('13) once 4 wheel drive is engaged? Thanks for making repairs look easy.
Great video. It must be nice to work on a vehicle when everything isn't all rusted.
Best video about CV joint /axis on youtube! 👍
I saw a video on the same subject and the CVJ in question had a tiny split in the boot with minimal grease depletion - there was still plenty inside the boot. A test drive showed no knocking. The problem had been noticed really early. However the garage still changed the drive shaft. They didnt answer my comment which questioned their decision to change the drive shaft. Wonder why?
Excellent demonstration. Thumbs up
Such an informative video, thank you! I seem to be getting intermittent clicking noise at higher speeds too as well as a humming noise when turning at very slow speeds especially when i have my foot on the brake to slow down at the same time as turning. Any ideas?
if you lift your car by the A arm you can simulate it holding its weight on the wheels and spin them freely while listening for clicking.
Thanks for making this video.
Hi, I have hamming/vibrating noise coming from passenger side, when I'm sitting in driver seat. It's like something is spinning in uneven way. Zero up to 100 km/h nothing. It starts at 100 km/h, peaks at 110 km/h and disappears at 130 km/h. That sound is definitely connected only to car speed and not to engine rpms. Its louder when pressing gas pedal/accelerating, but it does not disappear completely when not accelerating. Its not engine, because that sound is same when in neutral or any other gear. Its not unbalances tire or wheel. I tried many different wheels. Ball joints are perfectly firm. Sound does not change when braking. There is no play in wheel in any direction. I've already changed both sides bearings and inner transmission side axl homokinetic joint since I found this joint could cause this sound. No rubber boots were damaged. All looking good as new. I used high quality replacement and nothing helped. Axl itself looks perfectly fine. I also tried clicking test when turning full left, full right and accelerating. Nothing, there is no clicking sound. No I dont know, this sound started just like that 4 month ago and does not get better or worse. Still the same. I didnt hit pot hole or anything. I'm driving quality highways. My car is vw golf 6 with only 110 000 km in very good shape. Now I plan to change outer wheel side homokinetic joint, but I dont believe it will fix it. I will be glad for all ideas and suggestions.
Nice...thanks for explaining it so well
Greetings from Lagos Nigeria ❤
On that style with the c clips, if you can get a chain wrapped behind it and tug straight it usually pops wright out. Only do one side at a time.
Can u also mention the causes and also if they are covered under warranty! Thanks for your work !
Great info vid. My question is do u need a wheel alignment after u work in any part of ur suspension?
thanks for the ultra pro demo video!
Awesome video!! Thanks a million.
Good job. I have a kia. Spectra doing the same. Thing. Only when turn. Should i change. Both bearing an axle..
Thanks alot for the video.
Wow very informative video! Thank you!
Perfect video! Thank you sir!
Thank you for that I had a mechanic today tell me it's not my cv but the boot was ripped when I baught the truck and now 2 months later it's starting to make a little noise at acelertion and 4 wheel front drive side time wearing inside of tire thingy it's my cv.?
*LIKE !!!* Presente en clases desde Navoyork Sonora México
You can repair a split boot by filling it with grease using a plunger or a used hair dye bottle, then cleaning the outer surface of the boot around the split with a good solvent, and then applying a decent quality marine sealant like Aqua Seal or Sixaflex. That's the cheap fix.
Good Video, very informative.
Great job
Great job my brother😊
good technical explanation of outer Axel CV joint issues # mostly out axel CV joint collapse & create problems #👍🇵🇰
can it also be a cv axle problem if the clicking happens during deceleration?
Nice & in detail, pls keep it up..
Would you guys have a camshaft position sensor pigtail/connector for 2015 charger sxt ?
I don’t feel confident replacing this part myself, what’s the cost and labor for replacing a cv axle?? I have a 2005 Tacoma with Rear wheel drive
How do you find vehicles that need work done to do videos? are they employees? under impression the garage is in same building as the warehouse and corp offices. another informative video
Any ideas for trucks that are 2wd, but still hearing clicking at the front end when backing up and turning? I did all ball joints, and tie rod inners and outers, brakes, and swaybar links. I'm really scratching my head with this one.
Interesting video thank you
Thank you!!
What truck is that you made it looking easy
I like your video on this cv Joint But I have an oil leakage from my car after changing the zeal on driver side on Rx300 what can I do
Please do this vid again with a floor jack and jack stands so that your target audience can see how it is done without thousands of dollars of tools and commercial car lifts.
Will the truck shutter slightly while turning on take offs only? Doesn't do it when straight. Feels almost like torque converter slipping.
Cv axle control the brake and emergency brake, when cv axle bad , you'll notice when braking hard , then makes that clucking or cracking noice , it most likely it's the cv axle
Here is a fun question for A1 Auto's next Q and A video. What is your most sold part? IE wheel bearings, tie rod ends, etc.
Do we need to replace that cv joint if popping sound occured or it can be done by greasing only?
This video mostly showed the components of the joint more than how to properly remove and reinstall it
+Troy B Thanks for the tip! We'll pass this info along to our production team.
Do you have to replace all cv joints or just the one that’s having issues ?
Hey can the cv axle make noise also when my truck is going slowly or coming to a stop?
Mines not on turns. But it goes with acceleration I KNOW I need to replace my front differential on my dodge ram though, as 4x4 during winter time is a "use only to get unstuck" situation.
Just replaced mine today! Thanks for the video! The inner joint was a tough one to get out with only having the car on jack stands. But that was the only hiccup! Very easy and informative video
Can you be needing Axel but the boot is not Ripped or does not have a hole?
Remember to have the car realigned when removing any suspension parts. Thanks for the video.
very informative video
+Nouman Mehmood Thanks for the feedback!
I just replaced my driver’s side cv axle due to a clicking noise mainly on low speed right turns. I still hear the noise… what could the issue be? Bad axle? Wheel bearing? I also need new sway bar end links bc they are blown, could that be it too?
If the boot is intact and there's no grease coming out but you have a small clicking noise but it only started after we did the front ball joints upper and lower and the rocker arm on a '99 Corolla what do you think that could be besides the CV axle I'm dumbfounded
i have an 05 freestar,it makes that clicking noise only when i back and turn the wheel would this be the cv axle?
The clicking is from the combination of it being a Chevy, being in a demolition derby based on the body, and the fact that corners were cut by wasting money rebuilding the half shaft. Rebuilding the half shaft leaves metal and dirt in the joints that prematurely wears the bearing down and fails all over again. Replace the half shaft with a new one. More efficient and lasts longer
+Velvet Bear Thanks for the feedback!
What if you have a rwd and don’t have front axles and you hear the same noises and symptoms as a broken cv axle what would it be?
i had a loose lug nut cluck before---good pointer
I have a 2016 Chevrolet Traverse LT all-wheel drive it makes a clunking noise when you take off and it quits making that noise once you get going. It shutters when your going up hills and taking off at a low speed. I got my transmission oil changed thinking it would help but still no help. Any suggestions
I just replaced passenger side cv axle, it is making a noise. Transmission goes through the gears just fine, no binding or hard shift, very smooth. Any ideas?
Nice video! Great for me since I am newly learning about car maintenance. Two questions: 1. What fluid systems does the grease leak from? 2. What should be done to make sure that the new axle is properly lubricated and that the fluid systems are maintained?
Replaced CV axles on a AWD jeep grand Cherokee. Still have clicking and popping sounds from front end. Any ideas?
thanks
If I turn and having a popping like noise, would that be a CV axel problem as well?
Is it possible it just needs grease ?. I don't have a torn boot or grease around it
My bmw E46 have same noise back left side. Is it posable it have same problem ?
Good video. I also enjoyed the "curve mod" on your fender. :-D
What a good timing, I was doing my oil change and I noticed one of the boots on my axle is ripped and there is grease every where, I have no click it noises tho.
Does the clicking go away and come back? I'm getting the same sound but it's not every time I drive.
good one
how long does it take to repair, and how much should someone expect to pay?
could u clean the bearings and cage, regrease and put back? instead of replacing ?
What if the CV Axle clicks when you jostle it with your hand while parked? No leaking from joints. No slash in boot. When driving it sounds like metal on metal, crunching, and minor vibration
What happens if it’s burns out again whether it’s a new one? And what if it still makes the clicking noises my car is doing it and I recently changed it but didn’t last long for the noise the come back again and I’m frustrated and don’t know what to do
HOLY CRAP YOU JUST REMINDED ME I DIDN’T TORQUE DOWN MY BOLTS ON MY CAR AT ALL AND I’VE BEEN DRIVING LIKE AN ASS SINCE I REFRESHED MY CONTROL ARMS
Can a bad cv axle start moving in and out causing torque steer ?
I’ve had to do one of those on my car now the cars pulling hard to the right. And don’t know why. Not alignment. And not any bushings. And it’s oem spec part.
My 2001 Honda Accord right side was making all that noise. Of course I ignored it until the entire spindle came loose on a right turn. Needless to say, I'm uber sensitive to any and all sounds not normal now. Live and learn yeah? Beside, I do all my own work now and parts are ridiculously cheap for my car.
My 20 year old shitbox has the same sounds whenever I'm accelerating while turning. Is it better to replace only one axle or both sides??
Awesome
Was that damage because of the accident in same side ? And is it dangerous to drive cars with this problem?
Good video
God Job
I like Scotty but there r mechanics that r just better than him and this vid proves it.