How to PROPERLY Paint Your Brake Calipers
Part 2 ▶︎ • How to Install Stainle...
Products in Video 🔨
Dremel 4000 Rotary Tool Kit ▶︎ amzn.to/2drXfXr
Brass Wire Wheel ▶︎ amzn.to/2dpvBr3
Rustoleum High Heat Primer ▶︎ amzn.to/2dpxfsL
VHT Caliper Paint ▶︎ amzn.to/2dpw6kW
In this video, I show you how I paint my 4 piston brake calipers that are going on my Accord. This process isn’t difficult, it is just a bit time consuming as you’re painting, and waiting, painting and waiting.
I used a dremel, a wire wheel, and 180 grit sandpaper to get the caliper clean. I then used a high heat primer, followed up by my base coat. I let that dry, and then put on some brembo stickers that I picked up from eBay, and sealed it up with a high heat clear coat.
If you have any questions regarding the video, you know where to throw them!! Thanks for watching :)
______________________________________________________________
Please give it a like 👍 and follow 👣
milanmastracci KZhead Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
How to Build a Big Brake Kit on the Cheap ▶︎ • How to Build a 4 Pisto...
How to Remove Rail Dust ▶︎ • How to Remove Rail Dus...
______________________________________________________________
Video Chapters
Introduction: (0:00)
Overview: (0:32)
Disassembly: (1:08)
Prep & Cleaning: (2:57)
Painting Process Explained: (4:15)
Primer: (5:19)
Base Coat: (7:23)
Decal Application: (9:01)
Clear Coat: (12:15)
Final Thoughts: (13:00)
Extra tip for anyone doing this, use a gray scotchbrite pad after the primer to smoothen out the high build areas so the basecoat looks higher gloss and less orange peel
800 grit sandpaper
@@Anthony-cc8bx do you wet sand it or dry sand it after the primer? Probably a dumb question but it’s my first time🤣
@@AssassinKZhead remember paint shops? They'll sand the primer and the clear coat
@@Anthony-cc8bx True, thanks for responding!
@AssassinKZhead Probably wayyy too late to be responding to this, but wet sand it!
Brembo or not, "fake" or not, this is still a solid guide (and a good job) to painting brakes.
Ehh, really laid it on a bit thick. Ideally you wouldn't hold the can that close.
except that the paint won't last.
Why not just put Honda or Acura on them?
No this is not a solid guide. If you want it to last you will disassemble the entire caliper and properly tape off everything. He got paint on the boots and didn't tape up the banjo bolt hole so paint is inside the caliper. I wouldn't let this ricer change my oil.
@@johnsumner2987 lmao so true
I love painting little stuff like this. It just makes things look better
It's a good idea to mask off the mating surfaces (where the caliper meets the mount) and properly mask off the rubber piston boots. Removing those Torx bolts first would have been a good idea too.
the broadcaster is showing you how to prep and paint, and he's sharing the specific paint brands, great finished product ... thanks for taking the time!
Not sure why there’s so many dislikes. This is the first video I’ve seen of someone doing it right all the way and taking them off the car completely to get full coverage. Looks great man!
Because it's quicker and easier to just brush paint with the calliper still on there. Also lasts longer than spray and is less costly while looking just as good
Good explanation, personally would have not sprayed the bolts/screws red though, leaving them with their existing metal finish would have been nicer.
He literally said that you can change the color of the bolts if you want to.
@@junior17medval That's literally not what he meant lol
Yep, mask the head and part of the thread and screw them part way in, also great place to use wire to hang them for painting properly.
@@junior17medval yea we know bud. Not the point
@@zodspeed original comment suggested that the unpainted screws/bolts would have been nicer. At 3:50 in the video he says to mask the parts you don’t want to paint. There are countless of videos of people who paint over them and people who cover them. That was the point of my original comment. I just think it was an extra step that the guy didn’t want to do and felt it looked better painted, so cry me river. Also I ain’t your bud, pal.
Your commentary and overall presentation blows all other DIYers out of the water. The quality of your work is far more impressive than a lot of the videos with millions of views!!
Dude don't listen to the haters, they look awesome and still have the function!!!
Juan Rodríguez says the guy with a riced out honda civic on his profile picture, and a stanced car as his banner...
Adam Gronemeier hahaah
AJ G let people do whatever they wanna do with their cars
AJ G says the guy with no work
@@ajg8600 hahah
Love your passion for taking your time in doing it yourself plus doing it the best way possible well done man 💯
Great video! I'm glad someone mention how important it is to use high heat primer as brake gets very hot. Plus the paint will stick to the calipers much longer.
I like how these turned out! But I’ve been powder coating for 4 years now, and seeing how durable it can be I’d say once when I can upgrade to Brembo’s I’ll powder coat them 🔥
Great video only suggestion to others doing the same would be to also cover the 4 bolts visible on each side, just in case you need to rebuild calipers sometime in the future.
You had me at “properly”. Then a sensible vid. Well done sir. Subbed
Really well explained, and you covered the areas I've had trouble with perfectly. You're good at this.
That finish is AWESOME. Hell, just from you sanding it, it looked awesome. But next time. PLEASE tape off the mating surfaces for the brackets and bolts and somehow the slide pin holes. If you have a layer of paint between the caliper and its bracket, the bolts can loosen because the paint will compress and/or squeez to the outside. Same goes for wheels too. Don't make a mistake like I did.
I agree..more tape ..I cringed every time he sprayed. I pictured future clogs and stuck bolts with 100 layers of paint.other than that..I think they looked good.
Fantastic Job. By the look of the raw cleaned calipers, It appears to me you had them sand blasted also. Like I said, "Fantastic job" Love the sticker detailing. Thanks!
Very clear , well spoken and ultimately informative thank you
Nice job on the paint work. Masking was a little dodgy on the pistons but hopefully that doesn't effect the rubber seal over time. I'm about to replace the calipers on my 79 chevy pickup project vehicle. Going to be using basic free floating OEM replacements but will be painting them prior.
follow none of this and you should be good
When you do your calipers on the 79 chevy...don't forget the "brembo" stickers
Man.... I can respect your channel!! awesome tutorial for a great job painting calipers.
Great vid fella. I’m just about to paint my calipers so this was just the right time to watch. I was unsure what to clean the calipers with before painting but now I know. Thanks.
Quick tip: You should of just hang it with a coat hanger and paint both sides in one shot.
I thought that same thing
Good luck finding a wire hanger. :)
@@tommyarmour68 You can use chicken wire instead, heck even soldering wire would work
@@tommyarmour68 Try getting your clothes dry cleaned
Tommy Armour I got like 100 at home, anyone who does their own car work should
I thought you did a great job, they look awesome in red, sticker is a nice touch too.
This is really good. Thanks for putting in the time and effort to share it with us.
Nice job, Well done! It's a pleasure to see something done right.
You're quickly becoming one of my favorite youtube channels
Great work bud, anyone hating on what you did/taught just might have some kind of misery in their life and just looking for random people to deflect it on. Keep up the good work I might apply this to my car one day and be confident enough to know I'm doing it the right way. Remember haters don't break you, they make you stronger.
hey "denis"...doing it wrong is doing it wrong. this kid did it WRONG! just because people know how to do RIGHT doesn't make them haters. And you defending this shit job makes you an asshole.
Joe The only shit here is you 😏🖕
I really don’t I just like people faking stuff. It’s like putting a V8 badge on your V6. Why pretend
@@BMWROYALwhat did he fake? those calipers are made by brembo
Great video man! I'm ready to paint my calipers now sure learned a lot appreciate it.
Nice work man! I like how thorough you are both in execution and communication. I'd pull out the bolts and paint them white
Nice video man, professionally done. Thank you for giving us permission to put our stickers on anyway we want. :-)
They look great! I would leave them how they are. I am not a fan of more than 2 colors, but if you paint the screws white it will look cheesy. At the very end though is what you like. Great vid!
Very impressive. The best “How To” paint your calipers on KZhead. 👍
Awesome job, looks really straightforward and high quality look. Just wished I had a garage and tools to try work on my Mini Cooper s 05 plate. Thanks for sharing.
Haters gonna hate... Great guide, very clear, with excellent results. Love the videos man, keep it up!
Hi, very good tutorial
Beautiful! You did an awesome job. I am glad I watched your video before I start the paint job. Spray clear coat after the sticker is applied.
Thats the best video i have seen for this process so far. thanks for your time and effort 👍
you done a mistake! I work in Brembo company in Italy, and when the brake cakipers are painted, the holes where the bolt go on, are covered with properly stickers ti prevent that the paint doesnt go inside the holes.
Hi, just say thank's for this amazing tutorial easy and clear. Just wanted to ask if Vinyls are able to withstand the temperature of the brakes? Un saludo from Spain :D
A better option is to get stencils made and actually paint the lettering on with high temp paint. It'll last much longer. Vinyl can't withstand heat very well, as it will crack and peel. There is some specialty vinyl that can stand higher temps, but paint is still a better option for longevity.
Top job! Excellent result and thanks for posting.
Very well done! I'm not a mechanical person BUT if I was this is what I would follow, great video and will be looking for more of your auto tips!
You make great videos man, hopefully soon your channel blows up you deserve it.
Thanks Rusty :)
+milanmastracci DUUUUDE!!! This is AMAZING!!! :D
+milanmastracci Paint that bolts black!!! It would be amazing and it's contrast to white brembo sticker!!! :)
Are you threatening to blow up his channel? I'm reporting you to the FBI for terroristic threats.
+John Smith you're funny... :)
I want to put yellow Bugatti decals on mine, I can't wait to paint my Kia Rio drum brakes green.
The Abortion ew
That's only just less poser than putting brembo stickers on shit brakes that arent actually brembo.
Uuuhhhh ._.
Yeah that would be.........interesting
@@tesmith47 2020 baby
That looks frickin AWESOME! Good job mate
It was time for me to replaced my rotors and pads over the weekend. So I decided to test out your tutorial that I've watched. I will be the first to admit that my calipers look AMAZING! Took some time to clean them to my standards but never the less, they shine and I'm very pleased w. the results. Thank you for the post!
The stupidity in the comment section of this video is astounding. Brembo sells their brakes to car manufactures who put their own logo on the brakes. Just because it doesn’t say “Brembo” doesn’t mean they’re not actually made by Brembo. When you see CTSV brakes on a 240 those are actually made by Brembo not by caddy or the brakes on a Ferrari are not made by Ferrari but usually Brembo, same with lambo, VW, Porsche, Honda, Ford etc.
philo lee thank you 99% of people here cant bother to make a little research before typing dumb ass comments.
I aint a honda pro, but apparently those are made by advics not brembo. So yeah, still a ricer thing to put those brembo stickers.
@@imnota My Acura TL Type S is fitted with brembos in the front stock but they don't say brembo they say Acura. The ones in the video are essentially the exact same brakes but from the Acura RL.
@@KnowItNation Maybe, but those are advics, he actually made another video were he explain they're not brembo and repaints them with the advics logo...
Exactly what I’ve been saying some people can’t differentiate a Brembo Caliper from a stock single piston caliper
People giving this kid so much shit, granted he added a brembo sticker to a honda caliper; but half you pieces of shit drive some broken kia or don't have a license. Secondly; just had a company teach my crew and I some new ways to paint better/ help it last longer. To make that paint seal better, after you clean it off with brake cleaner, USE water. You don't want anything in between the cast metal/primer. Second, focus hard on priming every area. Any areas you miss dirt, grease, brake dust will get into and eventually ruin the paint & separate it from the cast (flaked paint.) Honestly not that bad of a job, but if you want the caliper to look a lot smoother, use a higher grit sandpaper.
Don't forget degreasant ^^
Well to be honest, I'm pretty sure those are the Brembo calipers off of an Acura, so the stickers make sense.
But some of us don't drive drive broke down Kia's and we've had a drivers license for decades it's just I'd rather be neck deep a good steak or some pussy instead of painting my brake calipers.. That's all
Tim Yeakel then why the fuck are you even watching this video?
Tim Yeakel You really are a fucking idiot. Thinking you're all hardcore on the internet for a bunch of people you have never and will never meet.
Amazing work! Thanks for sharing! It looks really nice!
nice job dude, Im in the process of a rebuild now and this solves my problem of not having an oven, probably wont paint over the pinch bolts and dust seals though. many thanks
I've watched like all of your videos and was wondering how you know everything you know. Did you go to a automotive technical school or did your dad teach you everything about cars? It really seems like you know every part of the car and how each of them works
Jake Steinberg With the internet, anyone can learn almost anything. He probably watched others tutorials to teach himself.
looks great
Thanks man!!
Miguel Horta fake crap
I agree with Miguel! You did an awesome job and take pride in your work. The end product speaks for itself. And who really knows exactly how long the paint job and stickers will last (depending on the abuse of the driver). It's not like you're trying to sell them as 'knock offs'. It's the fact that everyone's not born with the option to spend top dollar when they don't have that in their budget. Again, great job!
Love the accord and you got the perfect rims for the car....Great video and instructions...best DIY video on KZhead on how to paint your own calipers
There are many videos online but yours is one of the best. Amazing!
Can confirm, those are stock brembos. Brembo 4 pots come stock on Sti's, porsche, BMW and a whole slew of other companies.
if you removed the allen bolts fromt he caliper and replaced them with chrome or stainless bolts it would have looked a hell of a lot sharper.
Great idea, remove high tensile steel and replace with hard stainless more likely to snap on brake components
Or atleast pick the heads out with an artist brush and black hammerite smooth.
you are fucking dumb user12345
harry balsaq Wanna explain why? if you can?
you can replace the factory bolts with an equivalent grade stainless bolt with no problem at all. id be willing to bet my life that even an ungraded bolt would hold up fine
Beautiful tutorial, Brilliant job!!
Great video man, well detailed! Look forward to doing the same with my car too :)
Personally I would've put vinyl sticker on when it was bare metal, then after painted red and it has dried I would peel the vinyl sticker off so you have brembo in bare shiny metal. I just wouldn't trust the sticker to withstand the heat.
If they are quality high temp decals for calipers, they'll be fine.
I would do the same, or you could peel it off now so the brembo logo would be in a slightly different shade of red
Yeah but now you have exposed metal that will rust.
He sprayed clear over the calipers with stickers on place. They aren't going anywhere
@@DoomFinger511 they are aluminium
Paint that 4 torx bolts black will look sweet
No. The first time you touch them with an alien key, the paint will chip. So they'll be chipped from day one. Buy anodized or use stainless.
@@patkawasaki it only does that when u have cheap bits
Great video. Thanks for getting right into it and not delaying by talking smack, for 90% of the video. Will definitely be doing mine this way, and hopefully get an extra 20 horse power 😂
Great video, very instructive and complete! Good looking accord too
Now over five years later, did the paint ever start flaking off? How tough and long lasting was the finish? It'd be helpful to see what they look like now.
Considering how the calipers on the accord looked I’m wondering the same thing
To properly lay primer & paint especially from a can, you first spray all the difficult to get at places This helps prevent paint can drips, run(s) and or a thick layer line(s), on the easy to see painted surface. Any of the aforementioned flaws, make even the best of looking paint jobs start to fall apart the closer you get to it.......
Wow, great job, solid system, thanks for sharing
Great job. Thank you for the video!!!
where did these stickers come from and will they stand up to the high temp of braking?
Wouldn’t the sticker burn with the heat of the braking system?
They're high temp stickers...well hopefully his are.
This and ChrisFix's videos are the best tutorials on DIY auto content around. Although for my preference, I would have painted them separately and painted the bolts black....but that's my aesthetic.
Great job man, thank you for sharing.
the kid did a fine job brembo stock Acura don't matter 4 piston is 4 piston damn everyone a KZhead expert but u searched it employs ur not an expert
Only he didn't, because he got paint in the fucking boots and banjo bolts. The only way to do this "properly" is to disassemble the fucking caliper, which he clearly didn't.
@@whorutothink but why disassemble for, they literally never need to be anyway 🤷
tl;dw: use primer before paint, clear coat if you want high gloss
Great job, dude!
Hey, you did a fantastic job on those calibers. As far as painting the bolts go I'd leave them red just because that's how they look on a regular Brembo caliper. PS don't forget to take a small brush and paint the bolts that hold the brackets in for the break pads.
FFS It’s just a sticker guys come on
@2:57 he starts the cleaning process @9:01 he explains how to do a proper lasting decal
Fantastic. To donit properly this is how its done. Not on car quick paint job missing everything. Great work
Insane job on the paint man looks great
the calibers look really nice....how long did it take altogether? now your car has 25 more hp ;)
yo I installed that cold air intake on my civic lx but damn should have kept that front wheel drive those twin turbos are pushing too much Horsepower last week I beat an Enzo :D
+Brian Martinez 👎👎👎👎👎👎
Enzo with no gas ?
IMHO, I think it would look a best if you took the bolts out and brought them back to bare metal.
they turned out excellent
July, 2023 and this is still the most raw & satisfying thing to watch! Lol
I want brembos so bad but they're so expensive..
brembos just a brand, you just need to get bigger brakes OEM or aftermarket. I have seen newer cars that have standard 4 piston brakes with bigger rotors. there is nothing magical about brakes
+jgmacho the gold ones look nice. I have seen g37 with the 4 piston brakes but my g35 didnt come with them
+Carlos Orozco Craigslist and eBay or junkyards if you willing to pull from a wrecked car. I like gold calipers too but a more dark gold not that yellow gold shit
Brembos dont matter. All you want if you want a brake upgrade are more pistons for stopping power. I personally bought a oem option for my del sol and went with Nsx brake calipers in the front and thats a big brake upgrade and way cheaper than brembo and just as good or maybe better.
Although needless to say brembo brakes are nice
The sticker does not make the brakes
I know, but its an extra touch you can do to them.
+milanmastracci: Greeks performers used to put on these masks on their faces. The mask accentuated the facial characters of the actors. They were pretending to be someone that they were not. That is the where the word 'hypocrite' originated. I am not insulting you. I am educating you. Be true. Don't go in life pretending that you are someone or you have something that you don't have. Be the real deal. When a wall is out of plumb or not square, Its all called 'not being true'. Don't be one of those kids that spend money on an after market muffler to make their cars loud but has no power. Be the real Mc Coy kid. You 're welcome.
+Isaiah Singletary you look dumb when you pretend to be someone that you're not.
+Isaiah Singletary yes of course Only a novice wouldn't
That is the problem with a lot folks nowadays. They're OK with knock off. More concerned about image than reality.
Looks amazing! Great job!
Great video! Finally a good step by step process!
good tutorial but brembo sticker on non brembo brakes is rice af
You instantly became a ricer the second you whipped out those brembo stickers.
Geeze. They are Brembo brakes.
Stephen Harris no there not their ADVICS brakes get ur facts right before u comment
+DCNOS18 What is a ricer?
Donald E I have several cars with brembo brakes from the factory. Those brakes look pretty much identical. I can not tell if they are for certain brembo but if they are not then the asians sure ripped brembo off!
James D because it’s a KZhead comment, I know they are wrong but I don’t care because it’s not important
Great tutorial. I hadn't thought of doing a sticker. Something to consider.
Damn, you did a very good job. I will try this next. Thanks for the motivation ;)
Soo.. You stuck brembo stickers on non-brembo brake calipers... What is the point of that?
One word....... RICE
The plebs in this comment section.. man... its REAL BREMBOS... from Acura RL... 4 POT.. watch the last video posted.
I'm pretty sure Brembos plasters their names on the calipers. Even from the factory. If your calipers are brembos. You're gonna know by looking at the calipers. These were stock or "premium" calipers.. but they didn't have any brembo marks on them.
that's not always the case with Brembo, in this case the name was faded on the caliper
No it wasn't faded it wasn't there to begin with. Brembo brakes don't fade after only a few years. Just because they're 4 piston doesn't make them Brembo.
Ain't no one got time to do all that shit. this is 2016 everyone is busy af
You want it done properly or half assed? Spend the time to do it right and you won't have to do it again.
be my guest and pay over 1k for brembo brakes then lol
milan, most people on here are probably spraying their old rust bucket civics brakes. DJ, why be a poser and show off your fake brembos? their just brakes jesus.
Yeah, not like back in the old days when we spent all our time foraging and hunting for food. Now I have to spend all my time commenting on youtube videos.
Great job and always full of info on all your videos
Really professional looking video. Thanks for the many excellent tips.
painting 1 piston stock calipers red = rice adding a fake brembo sticker = super rice
Latin Lover Did You Not Listen? Theyre 4 Piston Brake Calipers...
Jack Williams / TympanicCoast72 doesnt make it less rice lol
Latin Lover uh, these ARE brembo calipers dude. Sticker or not.
Slayer-33 i never mentioned the calipers in the video
What's rice? lol
False Brembos. Ricer.
Acura uses actual Brembo brand calipers for the sport trims of some of its cars. So even though it came from an Acura they are still legitimate Brembos.
Yes but those calipers came from an Acura m8.
those are ADVICS calipers LOL not brembos
He said Acura RL and I had an Acura RL and I was almost positive they were Brembos I mean they look like it too
Mike DeClue brembos are a lot different, because first brembo brakes will say brembo and it’s not a sticker, and they designed better.... these are ADVICS brakes
What a great video. Attention to detail. Well edited too. Mine are being painted exactly the same tomorrow. A company is doing it for me. Your calipers look awesome. Liked and subbed. 👍
Well done! Ima do this too but just with a honda decal. Great video and instructions!
You capitalised "properly" in the title but this is not properly. PROPERLY is splitting the calipers in half first to remove the bolts...
Man shut your lonely ass up
Agreed. For most bolts/hardware, it’s better to either polish them up & apply an anti-corrosion sealant or just buy new stainless steel hardware; b/c if the bare bolts do fit snug into the correct socket, as thin as those few layers of paint might be, you likely won’t be able to get the correct socket back on w/o scraping the paint right off. Even if the socket does happen to fit w/o scraping the paint off, the moment you apply a bunch of torque to get the bolts off or back on, all that force on the corners/edges of the bolt are gonna make the paint crack, chip, & start falling off anyway. So, it’s really just a waste of time. Granted, in his case, those calipers use Torx bit bolts. So, I’ll give it to him that the paint on the top/outsides may not be affected by the Torx bit socket… BUT, he didn’t do anything to keep the paint from getting on the inside of the bolt. Which will either get scraped/chipped off right away or run the risk of stripping the inside corners if he can’t get the Torx socket seated properly. There are 2 easy ways he could’ve protected the Torx bits from getting any paint on the inside: 1. Stuff the inside w/ something soft like cotton, that can easily squeeze into all the corners. or 2. Fill the inside of the Torx bit w/ something like grease, wax, clay, Vaseline, etc., & then just clean it out afterwards once the paint is dry. #2 is my preferred method, but IMO, as a finished product, stainless hardware just looks better overall. ***Pro Tip*** If you are painting something that has fine details/edges (for example: raised or recessed lettering) & you want the lettering etc. to be in a diff. color, do the following: 1. Mask, Prep, & Prime as normal. 2. Use whichever color you’ve chosen for the detailed area or lettering first & apply a few coats as normal. 3. Once dry to the touch (or after 24 hours), go back & use either your finger or cotton swab to coat the lettering etc. w/ car wax. Lightly apply just enough, that when it dries, the color underneath doesn’t show through. 4. Now, spray a few coats of your 2nd color of paint evenly over the entire area. 5. Once it’s completely dry, use a soft towel & simply wipe off all the car wax. Any of the 2nd color of paint will effortlessly wipe clean off any part where you applied the car wax. 6. Once clean, you can go back & apply a clear coat if desired. This is much much easier than trying to mask off complex edges or lettering, where the any amount of bleeding underneath would make the whole thing look like garbage.
get 20+Hp by adding a fake brembo sticker, well done
Is that 20 per sticker? Then that's 80 hp
Says the guy with fake shoe comparison videos on his channel...😂😂😂
It was either a "brembo" sticker or an "Adidas " sticker.....I'd have chosen the "brembo" sticker as well. Good choice son
The stock 4 pot brakes on Acuras are literally made by Brembo
This is my first time watching your vid.. Awesome Vid.. very detailed.. Keep it up..
Great video with lots of good advice & tips. I don't know what all the razzing is about.