KZhead
Автокөліктер мен көлік құралдары

How to Spray Paint Wheels Gloss Black

THE_JOURNEY
2021 ж. 19 Мау.
206 078 Рет қаралды
Жүктеу

I go through the entire process of how to spray paint wheels gloss black I bought these wheels on Ebay for a steal for the Polo project and with a little bit of effort I will turn these wheels from a dull silver finish to a stealth glossy finish for much less than it would cost if you got the wheels refurbished by someone else I hope this video is helpful
Items used in video:
1- Masking tape - ebay.us/o8cm6F
1 - Tack Rags - ebay.us/F0RxGn
1- 3M Facemask - ebay.us/4EHZGm
2 - Proxl 2K Clear - ebay.us/Lz1EzI
2 - Etch Primer Grey - ebay.us/4YF8D0
2 - Gloss Black Aerosol Can - ebay.us/JSf4z6
1 - Red Scotch Bright - ebay.us/KeivOr
1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7
1- Panel Wipe - ebay.us/OG3qpL
1 - BOX of Gloves - ebay.us/vcMjnM
1 Meguiars Ultimate Compound - ebay.us/7FrpIU
1 - Panel Wipe - ebay.us/UJfurk
1- Plastic Bin Bags
1- Gazebo - ebay.us/s7JSeB
CAMERA GEAR USED:
1- My camera - ebay.us/G8d7K5​
1- SD card - ebay.us/5jCN89​
1-Vlogging tripod - ebay.us/cmvG4c​
Social Media: / the_journeyyx
MERCH STORE:
journeytomydreamcars.myspread...
Music Credits:
Epidemic Sound
Disclaimer:
Links included in this description are affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel.
Due to factors out of the control of The_Journey, I cannot guarantee unauthorised modifications of this information, or improper use of this information. The_Journey takes no liability for any property or personal damage that may arise from doing a repair on your car after watching any of my videos. Due to factors beyond the control of The_journey the information contained in this video will not create any express or implied warranty or guarantee of any particular result. any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not The_journey

Пікірлер

  • *I FORGOT TO SHOW THE LAST COAT PUT ON THREE COATS OF CLEARCOAT FOR THE BEST RESULTS!!* 👌

    @The_journeyy@The_journeyy Жыл бұрын

    • How many can did you use in total for the Primer, Paint, and Gloss coz i could guess how much it would Cost Myself

      @jerryconcar4800@jerryconcar4800 Жыл бұрын

    • I'm not sure exactly as its been a long time since I did this job if you've a look at the description I've got all the items and quantities used in that 😁

      @The_journeyy@The_journeyy Жыл бұрын

    • Question though Iv got no issues spraying a set of rims but how to get them properly dry so they don't end up soft

      @oliverredman@oliverredman Жыл бұрын

    • You don't spray in very humid areas and you follow the instructions for allowing them to dry per coat as suggested by your cans instructions

      @The_journeyy@The_journeyy Жыл бұрын

  • Watched loads of these videos, this one is by far the best step by step process for a DIY'er doing it at home!

    @BB-gm4xs@BB-gm4xs2 жыл бұрын

    • Hi B B thank you that's what I was going for the first version wasn't as clear so tried to make sure this one was

      @The_journeyy@The_journeyy2 жыл бұрын

  • Beautiful job. Nice to see someone take the time to get the back of the wheels, too.

    @thom8577@thom85772 жыл бұрын

    • It takes a bit longer but the results are amazing, thanks for the nice words Thom hope your well

      @The_journeyy@The_journeyy2 жыл бұрын

  • dude thank you for this video! I want black wheels for my ILX and my dad suggested we spray paint the metallic ones I have now. Had no idea they could turn out this nice! Super excited now. Thanks again.

    @iQuatro@iQuatro Жыл бұрын

    • Thanks for watching the video don't forget to put on three coats of 2k clear for bodyshop results 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • Wow! This looks smooth and clean! Great work and finish my G!

    @meroxbeograd@meroxbeograd2 ай бұрын

    • Thanks bro 👏

      @The_journeyy@The_journeyy2 ай бұрын

  • No nonsense straight to the point tutorial. Great video and appreciated. Thanks

    @markfeuz4699@markfeuz4699 Жыл бұрын

    • Thanks for the kind words Mark :)

      @The_journeyy@The_journeyy Жыл бұрын

  • Looks so good man! I am going to do this for my wheels!

    @im.weasel@im.weasel Жыл бұрын

    • One of the best modifications to the car appearance 👌

      @The_journeyy@The_journeyy Жыл бұрын

  • They look FRESH. Great job 👍

    @nigelbryant5932@nigelbryant59322 жыл бұрын

    • Thanks Nigel its so strange how changing something so small can make such a drastic change to a cars look put them on this weekend and I was pleasantly surprised at the difference 😀

      @The_journeyy@The_journeyy2 жыл бұрын

  • Man I’ve painted plenty of wheels and tried different techniques but after watching this video I definitely did the set I just painted the best. It was my first time sanding the primer and using 2k clear gloss and I can’t believe how good they came out! Thank you for the tips!

    @392hendo@392hendo Жыл бұрын

    • That is such a nice compliment bro I'm glad this video was of some use I remember when I painted my current wheels on my VW its crazy to think how long that's been and how wheels can make or break the look of a car 😀

      @The_journeyy@The_journeyy Жыл бұрын

    • I just did mine. And the paint scratched off. What do u think I did wrong?

      @sutton590@sutton590 Жыл бұрын

    • 1) Normal things that cause this are skipping the prep of sanding the wheel or 2) the most common using cheap 1k clearcoat which isn't as durable as the 2k bodyshops use and the one I used in this video proxl or 3) not putting three coats of clearcoat did you do any of those?

      @The_journeyy@The_journeyy Жыл бұрын

    • @THE_JOURNEY I did sand. I used 2k clear coat. I think I may have only did 2 coats. 😪🤦🏾‍♀️ How are ur rims holding up? I may have to get mine done professionally.

      @sutton590@sutton590 Жыл бұрын

    • Sand well, 3 coats of primer, sand lightly with 800 grit to flatten the primer, 3 coats of paint and then 3 coats of 2k clear. My wheels are holding up well not sure how long it's been since I installed them 😊 the first time painting can be a bit hit and miss I had similar issues when I painted my first panel and used 1k clearcoat but now if I paint a panel even with cans you'll find it hard to guess whether it was a can or spray gun job it's all a practice thing and once you've done it once as long as you follow the steps and you use good products for example like proxl 2k you'll get amazing results the amount of people that have reached out or sent me pictures of their wheels it's fascinating

      @The_journeyy@The_journeyy Жыл бұрын

  • straight to the point. many thanks for the vid.

    @pavel514mtlQC@pavel514mtlQC Жыл бұрын

    • Hi PvIT I'm glad you like the video thank you for the kind words 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • Nice video! Great attention to detail. I appreciate your tips. I’m starting this project Sunday on my Lotus . Warm Regards Chris in Miami

    @chriskaczmarek7204@chriskaczmarek7204 Жыл бұрын

    • I appreciate you watching Chris don't forget to throw on three coats of 2k clearcoat to get bodyshop results 👏👏

      @The_journeyy@The_journeyy Жыл бұрын

  • Looking sweet bro you for this video, very detailed and proper just what I was after, legend 🙌

    @nevinhattle1914@nevinhattle19148 ай бұрын

    • I am glad the video was of use thank you for watching 🙌

      @The_journeyy@The_journeyy8 ай бұрын

  • Nice job simple and great finish.

    @BP-xe7dw@BP-xe7dw3 ай бұрын

    • Thanks 👍

      @The_journeyy@The_journeyy3 ай бұрын

  • Excellent job looks awesome

    @yystyyst1567@yystyyst1567 Жыл бұрын

    • Thank you mate I appreciate the feedback :D

      @The_journeyy@The_journeyy Жыл бұрын

  • Looks so good ! I’m looking at picking up some old alloys that need a little refurb hope they come out to a similar standard 🔥

    @astonishdeezy@astonishdeezy Жыл бұрын

    • Thank you bro it's definitely worth it I've seen so many people who have done theirs as well that have sent me pictures showing their results mad 🔥

      @The_journeyy@The_journeyy Жыл бұрын

  • Very great job! Made with love!

    @user-wk3vi6bs9p@user-wk3vi6bs9p5 ай бұрын

    • Thank you for the kind words 👏

      @The_journeyy@The_journeyy5 ай бұрын

  • That’s a fine looking job!

    @fkkmag8692@fkkmag86922 жыл бұрын

    • Thank you mate it's definitely given my car a nice look to it 👍

      @The_journeyy@The_journeyy2 жыл бұрын

  • Yo Dude, RESPECT patience and care and superb result for simple planning preparation and diligence. Thank you. About to do 16" VW Crafter Van conversion and need the look before the new tyres are worn out so this is s great Stealth Bomber look for a fraction of the price........thank you for your presentation and hard work. Brian & Anna. x

    @brianblackburn2516@brianblackburn25168 ай бұрын

    • Hello Brian thank you for the kind feedback I know the Van is going to look amazing for the best results don't forget to throw on three coats of 2K clear ❤️

      @The_journeyy@The_journeyy8 ай бұрын

  • Nice job dude, looks great!!!

    @sergeantc6122@sergeantc6122 Жыл бұрын

    • Thank you for the kind words 🙏

      @The_journeyy@The_journeyy Жыл бұрын

  • That looks tight man great job

    @angelitolozano8742@angelitolozano87422 жыл бұрын

    • Hey Jose thank you for the kind words 😊

      @The_journeyy@The_journeyy2 жыл бұрын

  • Lovely job there mate🙌🏼

    @johnpaulskeffington7579@johnpaulskeffington7579 Жыл бұрын

    • Thank you mate 🙏

      @The_journeyy@The_journeyy Жыл бұрын

  • Well done very well explained

    @Certiwhipps@Certiwhipps2 жыл бұрын

    • I'm glad you think so thank you Zain 😊

      @The_journeyy@The_journeyy2 жыл бұрын

  • Preparation is the Key !!! Great Job Bro

    @kokos8165@kokos81652 жыл бұрын

    • Definitely is bro 💯 just finished painting some bumpers video dropping tomorrow 😊 hope your well

      @The_journeyy@The_journeyy2 жыл бұрын

  • There is no more to say than grate video bro! U did well done job and this paint should stick this wheels years!

    @GPLGrzegorz@GPLGrzegorz10 ай бұрын

    • I appreciate the kind words and it sure does and makes the car look better 😄

      @The_journeyy@The_journeyy10 ай бұрын

  • Great job fella 👏👏👏🤩🤩

    @arfurdaley6399@arfurdaley6399 Жыл бұрын

    • Thank you for the kind words 👏

      @The_journeyy@The_journeyy Жыл бұрын

  • nice job they look mint

    @wayneturner7678@wayneturner7678 Жыл бұрын

    • Hello Wayne thank you for the kind feedback 🙏

      @The_journeyy@The_journeyy Жыл бұрын

  • Fantastic job

    @santinho212@santinho212 Жыл бұрын

    • Thank you mate 😊

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy its just not about how pristine them wheels looked like after the fantastic job but you also guided us through the right steps bit by bit and sticks in our mind I'm gonna do mines too hopefully near as good as yours. Thank you again

      @santinho212@santinho212 Жыл бұрын

  • Thanx Bro finally a vid that is easy to follow..Great work

    @berni9977@berni9977 Жыл бұрын

    • Thank you for the kind words 🙏

      @The_journeyy@The_journeyy Жыл бұрын

  • looks awesome 🤘 just got some used alloys with a really bad rookie paint job🤣☠ for dirt cheap😃 cant wait to sand em and do it right💪

    @jakkbatt4711@jakkbatt47112 жыл бұрын

    • Thank you Jakk Batt, crazy to think how such a small thing can make the car look so cool, nothing better than getting some wheels really cheap and doing a little refurb have a good time 😀

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy what did you use the scotch brite to do? I don’t see it used in the video

      @mediawillprogramandtricku684@mediawillprogramandtricku6842 жыл бұрын

    • Just to further scuff the wheels in those tight spots my 400 grit sandpaper might not have been able to reach sorry about the slow reply 😊

      @The_journeyy@The_journeyy2 жыл бұрын

    • ob😊t

      @MdImran-lg3tn@MdImran-lg3tn2 жыл бұрын

  • Beautiful job cheers

    @darryljohnston1284@darryljohnston1284 Жыл бұрын

    • Hey Darryl thanks for the kind feedback 😀

      @The_journeyy@The_journeyy Жыл бұрын

  • excellent job on the rims, found your video as i was looking for the best way to do it, a bonus thing is you have the list of whats needed right there too, now is that list for all 4 wheels ?

    @crewcorp@crewcorp2 жыл бұрын

    • Hi there Aceslong thanks for the feedback and yeah that's my list to do all four wheels yours might be the same or slightly different depending on your alloy size I'm running on the original VW 185/R60/15 hope that helps 😄

      @The_journeyy@The_journeyy2 жыл бұрын

  • I may never do that, but it’s a great idea!

    @rodrogers6895@rodrogers68954 ай бұрын

    • 👍

      @The_journeyy@The_journeyy4 ай бұрын

  • Good 👍 I'm going to do mine .

    @bigfist255@bigfist2552 жыл бұрын

    • Hi Bigfist255 I'm glad you're have fun its well worth it👏

      @The_journeyy@The_journeyy2 жыл бұрын

  • Great work! A great video as well! Do you recommend any specific brands of gloss black or clear that you have found to work better than others?

    @ReimaginedWraps@ReimaginedWraps2 жыл бұрын

    • Thank you, not any specific gloss blacks the one I used is one mixed by local autobody shop the clear I'd recommend proxl 2k clear the results are like professional booths hope that helps 😁

      @The_journeyy@The_journeyy2 жыл бұрын

  • Looking fine!

    @Bull1the1Great@Bull1the1Great5 ай бұрын

    • Thanks! 😀

      @The_journeyy@The_journeyy5 ай бұрын

  • Excellent!

    @PoughTownBoy@PoughTownBoy5 ай бұрын

    • Thank you 👏

      @The_journeyy@The_journeyy5 ай бұрын

  • Great job , u done awesome 👌👏👍

    @tendekaimutemeri5231@tendekaimutemeri52312 жыл бұрын

    • Thank you bro just trying you know 💯

      @The_journeyy@The_journeyy2 жыл бұрын

  • Looks great! God bless!

    @taylormoore4991@taylormoore499110 ай бұрын

    • Thank you mate appreciate the kind words 👏

      @The_journeyy@The_journeyy10 ай бұрын

  • I never sanded the primed stage. It makes sense thanks. I always wondered why the gloss black looked matt 🤔 😄 🤣

    @Crimsonhaha@Crimsonhaha2 жыл бұрын

    • I remember getting exactly the same thing when I done my first panel numerous times, ended up reaching out to a bodyshop just to find out why I couldn't get my gloss 😲🤣

      @The_journeyy@The_journeyy2 жыл бұрын

  • Very nice video!

    @maxm3445@maxm3445 Жыл бұрын

    • Thanks Max thank you for the lovely feedback 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • Nice work just ordered all the products planning to do it on my amg wheels let’s see how is that gonna go 😂

    @eneashkambi2891@eneashkambi28912 жыл бұрын

    • Hi Enea that's great you'll see how easy it is look forward to hearing back from you I really enjoy when people tell me/show me how great their new wheels look 😀

      @The_journeyy@The_journeyy2 жыл бұрын

  • Fantastic job just wondering do you paint the inside of the rim

    @bigyjeep@bigyjeep8 ай бұрын

    • Thank you and yes on this job I painted the inside as well 😊

      @The_journeyy@The_journeyy8 ай бұрын

  • Wheels looking sweeet

    @SonofChurchill@SonofChurchill Жыл бұрын

    • That sounds amazing :D

      @The_journeyy@The_journeyy Жыл бұрын

  • Great video mate, I’m planning to spray my silver alloys black. Do I need to rub all the silver paint off back to the metal first? Thanks!

    @ironman77725@ironman777252 жыл бұрын

    • Thank you mate appreciate the feedback and you don't need to rub all the paint off you just have to rub it down until the surface is no longer shiny and looks Matte

      @The_journeyy@The_journeyy2 жыл бұрын

  • This was amazing and i rarely comment or like

    @jayplunks@jayplunks Жыл бұрын

    • I appreciate the feedback bro thank you 👏

      @The_journeyy@The_journeyy Жыл бұрын

  • This is an excellent video, thank you so much! I completed the above on my BMW F20 and they look amazing. Only thing is, when I put my lug nuts back on, the wheel brace touches the inside and scrapes very easily and can see the old paint underneath. Is this common?

    @Askabar@Askabar Жыл бұрын

    • Hello Jason I'm glad it looks good and wow on the F20 that is a beautiful car and yeah it can be best way to not have that is to make sure you put 3x coats of clear on and use a good 2k clearcoat I realised after I released the video it only shows me doing 2x coats of clear but it's actually 3x coats for best results so I pinned a comment saying about that in the description hope that helps 😁

      @The_journeyy@The_journeyy Жыл бұрын

  • hey dude thanks for sharing the great video nice job how many cans of clear coat primer and color paint you used for a set of tire

    @YJ-fx6ry@YJ-fx6ry2 жыл бұрын

    • Hi there YJ thank you for the kind words I used: 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 If your curious about any of the other quantities all the quantities are in the description of the video hope that helps 😁

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy for 4 tires that is great thank you very much

      @YJ-fx6ry@YJ-fx6ry2 жыл бұрын

    • It definitely is great and no worries thanks for reaching out 👏

      @The_journeyy@The_journeyy2 жыл бұрын

  • Hi great job on the wheels. Im going to be doing my wheels soon on my corsa e, in black. Would be ok to put on 4 coats of black when spraying the wheels? Then once they are dry four coats of clear lacker so it will last longer.

    @barrymatthews2606@barrymatthews260610 ай бұрын

    • Thanks for the feedback if your putting on your colour and it looks like you've not got great coverage then yeah you can put on another coat of black. if you use good products you shouldn't need to put on four coats of clearcoat. For bodyshop results use 2k clearcoat three coats of that and your wheels will be shining and durable 😄

      @The_journeyy@The_journeyy10 ай бұрын

  • Plan on doing this shortly but two wheels at a time since I don’t have that many jsckstabds

    @volt_nightroleplayminecraf6998@volt_nightroleplayminecraf69989 ай бұрын

    • I think for most people it's like that as well I've only got two jacks too it's going to come out looking great 👏

      @The_journeyy@The_journeyy9 ай бұрын

  • Great video man! Just got done with mine! Are they good to put back on the car the day after or how long is the curing process/how long should you keep them away from the elements? -B

    @brockslider8562@brockslider85629 ай бұрын

    • That's amazing to hear it really does depend on a lot of different factors one of them being where you did the job and the temperature in that area I personally left mine until the following day because I painted them in 17 degree weather and I don't have a paint booth to bake them in for 30 minutes if the temperature was good in your area and its a nice hot day they could be ready to go back on in about 2-4 hours but for me personally I always leave them until the following day 😀

      @The_journeyy@The_journeyy9 ай бұрын

    • @@The_journeyy wow thanks for your quick response. It was nearing 95 degrees when I finished mine up yesterday, so I think I will be good by the end of today. 🙏

      @brockslider8562@brockslider85629 ай бұрын

    • Wow that's incredibly hot weather and also great for drying I agree with your assessment 👍

      @The_journeyy@The_journeyy9 ай бұрын

  • Nice Excellent job! I would like to do the same thing on my truck wheels but I have a question 🙋🏻‍♂️ is the paint and shine permanent when the process it’s done or does it fade away ? 🤔

    @hectorjr5128@hectorjr51282 жыл бұрын

    • Hello Hector if done correctly the results are like the bodyshop mine still gloss like the first day they were finished hope that helps 😄

      @The_journeyy@The_journeyy2 жыл бұрын

    • Thanks that’s very helpful 👍🏻

      @hectorjr5128@hectorjr51282 жыл бұрын

    • @@hectorjr5128 do a clear coat when you’re done and maintain it by not taking your car we’re they use scrubs.

      @goatpier7570@goatpier75702 жыл бұрын

  • Just come across this video and am looking to paint mine how many cans did you use for all 4 wheels and what paint did you use brand wise ?

    @bindrops8927@bindrops89279 ай бұрын

    • The brand is called Mr Aerosol if you look at the description got all the quantities and items used hope that helps 😄

      @The_journeyy@The_journeyy9 ай бұрын

    • @@The_journeyy cheers ill have a look

      @bindrops8927@bindrops89279 ай бұрын

  • Hey man they’re beautiful. I plan on doing this in the spring time when I change my brakes out. How long did the process take in total?

    @onwardlemongaming@onwardlemongaming2 жыл бұрын

    • Hello Cyrus thank you, it depends on your environment where your spraying. I did mine when it was like 19 degrees outside in my Gazebo. Started around 10 and finished around 6 the spraying of the coats is quick its the drying times that add up. If I had a nice warm garage and a heat gun I could have halfed the time hope that helps 😊

      @The_journeyy@The_journeyy2 жыл бұрын

  • Made me confident to refurbish my alloy factory wheels, ive been wanting to, i just wonder, how long do you think the paint will last?

    @Reecepieces5@Reecepieces56 ай бұрын

    • It will last as long as the typical bodyshops last if the work is done without skipping steps 😁

      @The_journeyy@The_journeyy5 ай бұрын

  • Excellent job. Could you list all the paint and sand paper required please. Ive never done anything like this what should i look out for and any tips?

    @glynn36@glynn369 ай бұрын

    • Tips I would advice is don't forget to apply three coats of clearcoat Hi here is the list of items used: Items used in video: 1- Masking tape - ebay.us/o8cm6F 1 - Tack Rags - ebay.us/F0RxGn 1- 3M Facemask - ebay.us/4EHZGm 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 1 - Red Scotch Bright - ebay.us/KeivOr 1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7 1- Panel Wipe - ebay.us/OG3qpL 1 - BOX of Gloves - ebay.us/vcMjnM 1 Meguiars Ultimate Compound - ebay.us/7FrpIU 1 - Panel Wipe - ebay.us/UJfurk 1- Plastic Bin Bags

      @The_journeyy@The_journeyy9 ай бұрын

    • @@The_journeyy Brilliant thankyou 👍🏻

      @glynn36@glynn369 ай бұрын

    • Thanks for watching 😁

      @The_journeyy@The_journeyy9 ай бұрын

  • How’re things man, I sprayed mine, similar finish to yours. Can I simply sand prime and respray flaked spots ? Or would I be better scrapping it all and removing it. It’s only on 1/2 slots where the alloy meets the tyre

    @lukepwc1724@lukepwc17242 жыл бұрын

    • Hey Luke, that is one way you could do it yeah or another method is you could give it a light sand with 2000 grit touch it up with some touch paint using a brush and then clear. I've curb mine so will be making a video next showing how I touch them up using that method 😁

      @The_journeyy@The_journeyy2 жыл бұрын

  • And how long will this paint job last with its glossy finish?

    @yasirKhan-nt2pq@yasirKhan-nt2pq9 ай бұрын

    • Same as the bodyshops

      @The_journeyy@The_journeyy9 ай бұрын

  • Yeah!!!

    @jodisdream7357@jodisdream73578 ай бұрын

    • 👏👏

      @The_journeyy@The_journeyy8 ай бұрын

  • Wicked video bro👌🏼 I've got a can of E-tech alloy wheel lacquer and the instructions on it recommend to sand down the paint with 1200 wet sand or the lacquer might not stick well. Do you think that step is necessary? Thanks bro

    @r444t6@r444t62 жыл бұрын

    • Thanks bro 😊 yeah I would say its a must give it good adhesion it will make the job look tidy and not starting peeling hope that helps

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy No worries 👌🏼If I was to use a 2k lacquer I'm guessing I wouldn't have to do that step? I don't believe this e-tech lacquer is 2k even tho it's made specifically for alloys.

      @r444t6@r444t62 жыл бұрын

    • If you was using 2k you would have to do the same thing, 2k is much more durable than 1k but I'm guessing since what your using is for wheels it should be very durable 👌👌

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy Ah wicked 🙂 Nice one bro, appreciate the quick responses 👊🏼

      @r444t6@r444t62 жыл бұрын

    • No worries bro if you ever have any other questions just drop me a message 👊👏

      @The_journeyy@The_journeyy2 жыл бұрын

  • Quick question bro. You put 3 coat of aresol black spray in your video but mention 2 in the the description. Do u buy 3 or 2 . And is there a specific order you spray them in or do u just pick one can and start with that as the first coat

    @ebz_official5790@ebz_official5790 Жыл бұрын

    • I used two cans of each bottle so 2 cans of the black paint, 2 cans of primer and so on When you paint the tyre you'll need to do 3 coats of primer first then 3 coats of black paint and then 3 coats of clear The order is primer, paint, and then clear coat hope that helps 😀

      @The_journeyy@The_journeyy Жыл бұрын

  • Great job how many black paint and primer bottles need for four wheels?

    @SultanAli-di4fp@SultanAli-di4fp2 жыл бұрын

    • I'm not sure dude have a look at the description I've got the list there and quantities hope that helps 😁

      @The_journeyy@The_journeyy2 жыл бұрын

  • Great job mate. What size wheels are these. I have some 20" and need to work out how many cans of each to purchase.

    @robertwymark6811@robertwymark68112 жыл бұрын

    • Thank you Robert 😊 I see you've got some proper tyres there. I've got 15inch wheels on mine

      @The_journeyy@The_journeyy2 жыл бұрын

    • How many cans did you use.

      @robertwymark6811@robertwymark68112 жыл бұрын

    • 2x Primer, 2x base, 2x clearcoat if you're curious about any other quantities there's information about everything used in the description hope that helps

      @The_journeyy@The_journeyy2 жыл бұрын

  • Great job 👏, just tell me name of the gloss black paint you used please

    @fredrk5223@fredrk5223 Жыл бұрын

    • Hi there its called Mr Aerosol I've put the link for it below hope that helps 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6

      @The_journeyy@The_journeyy Жыл бұрын

  • Great 👍🏻 May we know the materials and spray you are using?

    @MOHANAD84h@MOHANAD84h Жыл бұрын

    • Hi there its called Mr Aerosol I've put the link for it below hope that helps 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 If you've any other questions about items used I've put a list in description 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • Nice Job.....As for the comment regarding sanding before Clear coat, its a myth and is a wasted step. The best way to prevent Lacquer peel is to Clear coat within 30 minutes of of your last coat of colour, especially if your paint has laid well. The tacky paint will help the adhesion process and prevent peel.

    @davidlundrigan1435@davidlundrigan14352 жыл бұрын

    • Hi David thanks for the feedback, Agreed on the sanding before clear coat. I usually wait one hour before throwing on the clear do you think that's too long?

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy Yes, you need to clear coat whist the colour is still tacky to touch. Personally I SET A 20 minute timer after laying the colour and then I clear coat.

      @davidlundrigan1435@davidlundrigan14352 жыл бұрын

    • I will keep that in mind thanks for the advice

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@davidlundrigan1435 how many times did you clear coat? do i set a 30 minute timer between two clear coats ?

      @mandoosuiii8072@mandoosuiii8072 Жыл бұрын

    • ​@@davidlundrigan1435how many clear coats did u do? Like a cleae coat after every black color coat?

      @SuperSlimshady1@SuperSlimshady15 ай бұрын

  • 54k you know, my G!!!

    @richardmauto@richardmauto Жыл бұрын

    • Its crazy because I didn't expect any of these videos to get more than two views I'm grateful for the responses over 45k views a month I can't wait to see what we will be doing in the next 10 years 👏

      @The_journeyy@The_journeyy Жыл бұрын

  • How many bottles required for standard 17 inches rims ? What are the things required for that. Can you please list it down with quantity thanks.

    @alimalik4730@alimalik4730 Жыл бұрын

    • These rims I painted in this video are 15 inch rims all the items I used are in the description that might give you an idea of how much you might need for yours hope that helps

      @The_journeyy@The_journeyy Жыл бұрын

  • I really need to do this, my car is far too basic for my liking 😂

    @JordanAnimations3D@JordanAnimations3D2 жыл бұрын

    • For as long as I can remember my cars have always been standard as well I saw other nice looking modified cars and thought too much effort for me 🤣 its such a nice feeling making your car look nicer and it doesn't need to break the bank I've found

      @The_journeyy@The_journeyy2 жыл бұрын

  • i could not find the gloss black paint ebay .. help !!! the one used ,, help please ,,, love the gloss black ,,,very shine...

    @carlosbmartinez6457@carlosbmartinez64575 ай бұрын

    • Hi Carlos sorry to hear you couldn't find it here it is ebay.us/JSf4z6

      @The_journeyy@The_journeyy5 ай бұрын

  • Would I be able to do one wheel at a time with my car jacked? I don’t have a way to get all 4 wheels off at the same time

    @FMEjerks@FMEjerks10 ай бұрын

    • No reason why you can't it will just take a little longer 😄

      @The_journeyy@The_journeyy10 ай бұрын

  • I've always wondered can you spray color one day and the gloss the next day or even days later, and if so does it need a key to stick?? Or can you just make sure the wheel is clean and apply the clear coat?? Thanks.

    @craigbarker_calisthenics8022@craigbarker_calisthenics80229 ай бұрын

    • Yeah you can leave the clearcoat for another day or whenever your ready but it will need keying with 800 grit before throwing on the clear

      @The_journeyy@The_journeyy9 ай бұрын

    • Thank you for your reply, much appreciated, and if painting the same day, an hr after the last color coat has been applied the colour doesn't need a key with 800 grit?? Thanks again.

      @craigbarker_calisthenics8022@craigbarker_calisthenics80229 ай бұрын

    • On the same day if its an hour later or a little bit earlier you can go straight ahead and start your clearcoat without needing to key it with 800 grit

      @The_journeyy@The_journeyy9 ай бұрын

  • Great video! how many cans of black glossy spray paint did you use?

    @seeannor23@seeannor23 Жыл бұрын

    • Alright mate I used 2X - Gloss Black Aerosol Cans

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy Thanks mate!

      @seeannor23@seeannor23 Жыл бұрын

    • No worries mate Anytime 👍

      @The_journeyy@The_journeyy Жыл бұрын

  • Such question. I don´t want to paint wheels. I want to paint a plastic figure black. If I just spray Mr Aerosol Gloss Black directly whithout any applying any white or grey primers, will I get the same black mirror effect?

    @morriszachrisson8359@morriszachrisson835928 күн бұрын

    • You need to get paints suitable for plastic and yes the result can be reproduced if the job is done correctly

      @The_journeyy@The_journeyy28 күн бұрын

  • Did you wet the 800grit sandpaper when sanding the primer or dry?

    @BartoProductions@BartoProductionsАй бұрын

    • I did slightly but it's not a must

      @The_journeyy@The_journeyyАй бұрын

    • Ok thanks! 🙏🏼

      @BartoProductions@BartoProductionsАй бұрын

  • I have dark gray rims on my car I want to make them black should I still do the gray primer ?

    @cbfwcodak6564@cbfwcodak6564 Жыл бұрын

    • A light grey primer would still be good mine were silver I used a grey primer which wasn't that much lighter than my silver hope that helps

      @The_journeyy@The_journeyy Жыл бұрын

  • Can I ask do you have a list of the products that you bought to complete This? For example how many can you bought of each gloss primer and clear?

    @leepearson4833@leepearson483311 ай бұрын

    • Also loved the video 100% motivated me to give it a go on mine

      @leepearson4833@leepearson483311 ай бұрын

    • Hi Lee thanks for the feedback and yeah I do have a list of everything Items used in video: 1- Masking tape - ebay.us/o8cm6F 1 - Tack Rags - ebay.us/F0RxGn 1- 3M Facemask - ebay.us/4EHZGm 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 1 - Red Scotch Bright - ebay.us/KeivOr 1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7 1- Panel Wipe - ebay.us/OG3qpL 1 - BOX of Gloves - ebay.us/vcMjnM 1 Meguiars Ultimate Compound - ebay.us/7FrpIU 1 - Panel Wipe - ebay.us/UJfurk 1- Plastic Bin Bags

      @The_journeyy@The_journeyy11 ай бұрын

  • Wow !!!

    @gdawwg1125@gdawwg1125 Жыл бұрын

    • Thanks for the feedback :D

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy now I’m going to have to re-do my wheels

      @gdawwg1125@gdawwg1125 Жыл бұрын

    • Appreciate the feedback make sure to put three coats 2k clearcoat for bodyshop results and longevity 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • Quick question does it matter how long you leave it after the last primer? Because you said leave it over night before using the 800

    @darlington6314@darlington6314 Жыл бұрын

    • Yes it matters how long you leave it if you don't let the primer dry properly and you said it the results will not be very good. You don't have to leave it over night like me that's just a preference of mine depending on your location and the temperature in your painting environment if the primer is dry after 1 hour or whatever timescale you can sand it as a bare minimum I'd leave my primer to dry for a few hours if it was a hot day and then sand with the 800 if its a colder day more hours

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy I wish I can show you my results. Thanks to you. My tires look magnificent

      @darlington6314@darlington6314 Жыл бұрын

    • I've got email feel free to send over some pictures reginald71993@gmail.com glad your results come out as good as mine ☺️

      @The_journeyy@The_journeyy Жыл бұрын

  • Hey man after im done puttin on the last clear coat, how long should I wait before putting on my car

    @mandoosuiii8072@mandoosuiii8072 Жыл бұрын

    • You could put it on a few hours after it's dried but personally I like to leave it overnight and then put it on the car

      @The_journeyy@The_journeyy Жыл бұрын

  • when you finally removed the plastic and masking tape did you use a blade or a knife to score. or did you just peel it off?

    @alycapo3391@alycapo33912 жыл бұрын

    • I'm not getting the question mate you a knife to score what? Once the job was done I just peeled the masking tape off and the plastic of and that was job done hope that helps 😊

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy sorry I was assuming the paint was so thick it left like a layer. It happens with acrylic based pants. You can to score the masked area otherwise you risk peeling off the painted area but that's applied with a brush. Just wanted to make sure I didn't have to do that with the spray can. Also how long did you leave between the primer coats Top coats Lacquer coats Sorry for all the questions 🤦‍♂️ it all goes down tomorrow for me and I keep thinking I might miss a step

      @alycapo3391@alycapo33912 жыл бұрын

    • First time I've heard of that issue I didn't have any issues like that I just prepped my area properly masked up and got to work. Left it a day after the primer went on but I could have waited just a few hours if I liked I left it an hour after the final paint coats and then one hour between the clearcoats I've had many people get in contact on instagram showing me their awesome results judging by the sounds of things you know a thing or two about painting so it should be a walk in the park for you 😄

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy one last question, I'm having problems getting 800grit wet sand paper, I've got 1200 and 600. Which would you use?

      @alycapo3391@alycapo33912 жыл бұрын

    • No worries mate you can ask as many questions as you like, have you tried Ebay or Amazon? Or like a local shop paint shop near you? If your referring to sanding the primer after its cued I'd say the 1200 if your really not able to get 800 grit probably better than using nothing if you use nothing you just won't have as good a gloss

      @The_journeyy@The_journeyy2 жыл бұрын

  • Do u wet the sandpaper when ur sanding after primer just about to start doing a set of wheels myself

    @Milno-fq7bg@Milno-fq7bg Жыл бұрын

    • Hi Milno1996 yes I did wet the sandpaper when I was sanding the primer. That sounds amazing if you get a chance after your finished send me some pictures of your amazing results 😁

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy I will do that my man thank for the help

      @Milno-fq7bg@Milno-fq7bg Жыл бұрын

  • how many days do you have to wait to go to the carwash?

    @0zzy_0@0zzy_0 Жыл бұрын

    • When you paint a car or your wheels you don't take the car to the car wash for two to three months the pressure ruins paint if its not fully cured and set which takes a while you just wash it normally by hand with soapy water and a typical sponge sort of thing 😁

      @The_journeyy@The_journeyy Жыл бұрын

  • how much can u have used to spray 4 wheels is it 1 can of primer for each wheel and 1 can of paint each wheel

    @jaskiratsingh7115@jaskiratsingh7115 Жыл бұрын

    • Hi Jaskirat the whole job took: Hi there its called Mr Aerosol I've put the link for it below hope that helps 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 If you've anything questions about items used I've put a list in description 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • How many tubs of paint and primer did you use?

    @philm1981@philm198110 ай бұрын

    • Hi here is the list of items used: Items used in video: 1- Masking tape - ebay.us/o8cm6F 1 - Tack Rags - ebay.us/F0RxGn 1- 3M Facemask - ebay.us/4EHZGm 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 1 - Red Scotch Bright - ebay.us/KeivOr 1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7 1- Panel Wipe - ebay.us/OG3qpL 1 - BOX of Gloves - ebay.us/vcMjnM 1 Meguiars Ultimate Compound - ebay.us/7FrpIU 1 - Panel Wipe - ebay.us/UJfurk 1- Plastic Bin Bags

      @The_journeyy@The_journeyy10 ай бұрын

  • Hey there, can I ask how many cans of each do you need for all four wheels? Thanks

    @2learneasy@2learneasy2 жыл бұрын

    • Sorry just found it all in description 😁

      @2learneasy@2learneasy2 жыл бұрын

    • Hi there glad you found it was just about to answer the question but I've just seen this 😊

      @The_journeyy@The_journeyy2 жыл бұрын

    • No worries hope that helps 😊

      @The_journeyy@The_journeyy2 жыл бұрын

  • Great work man, how is the paint holding up

    @mcgarvy7@mcgarvy7 Жыл бұрын

    • The same as when first done if the job is done properly and good materials are used you'll get the same results as a bodyshop 😊

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy k, I was looking at powder coating my wheels but I’ll just paint them , powder coating is way more expensive

      @mcgarvy7@mcgarvy7 Жыл бұрын

    • I've heard it can be very pricey 😵

      @The_journeyy@The_journeyy Жыл бұрын

  • So what all spray paint cans do you need? Which type

    @Itzdaydaybtw@Itzdaydaybtw2 жыл бұрын

    • Hi Kevin have a look at the description you'll see all the products I used

      @The_journeyy@The_journeyy2 жыл бұрын

  • What's the point in the last process using the cutting compound? Finished my wheels and darent use the compound in case it removes the laqueer!

    @BB-gm4xs@BB-gm4xs2 жыл бұрын

    • The point is it just makes it shine more but that's just me wanting silly gloss the wheels didn't even need that after I finished they were beautiful! I waisted 48 hours before just buffing them with the pad and 2k is very durable it won't come off but tbf its not really needed

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy thank you they came out great. Top man!

      @BB-gm4xs@BB-gm4xs2 жыл бұрын

    • There's nothing I love hearing more than when people tell me they got the same results I did thank you for reaching out 🔥

      @The_journeyy@The_journeyy2 жыл бұрын

  • do you have to leave the primer to dry over night or is that optional

    @theheadhunter3225@theheadhunter3225 Жыл бұрын

    • No worries bro I left it overnight because that's just a preference of mine means I don't have to spend so many hours spraying in one day you can leave it a couple of hours until it's dry and then wet sand 👌

      @The_journeyy@The_journeyy Жыл бұрын

    • So how many coats would you say I should do if I was not to leave it over night?

      @theheadhunter3225@theheadhunter3225 Жыл бұрын

    • Still 3 coats for primer, base and clear coat 👌

      @The_journeyy@The_journeyy Жыл бұрын

  • Do u do wheel works for other cars.

    @ebz_official5790@ebz_official5790 Жыл бұрын

    • I've done other brands the process is exactly the same I don't do private work for customers though my life is rather busy and I genuinely don't have the time to fit that in 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • How many cans of spraypaint did you need to use? X

    @leemcgillivray@leemcgillivray Жыл бұрын

    • It's been a while since I did this job can't remember exactly I've got quantities for everything used in the video in the description hope that helps 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • When you are preparing the wheels do you use wet 400 grit first or dry 40 grit. Hanks Rob

    @robertwymark6811@robertwymark68112 жыл бұрын

    • Hi Rob I used wet 400 grit 😊 before that I used 320 grit to get the deep dirt of mine

      @The_journeyy@The_journeyy2 жыл бұрын

    • Brilliant thanks for your reply

      @robertwymark6811@robertwymark68112 жыл бұрын

    • Last question did you Lacquer the inside

      @robertwymark6811@robertwymark68112 жыл бұрын

    • Hi Robert no worries and yes with these wheels I put lacquer front and back 😀

      @The_journeyy@The_journeyy2 жыл бұрын

    • Thanks a lot for your time.

      @robertwymark6811@robertwymark68112 жыл бұрын

  • Do they get dirt on them at all or how long do you think they are good for ?

    @OrderFromPain@OrderFromPain2 жыл бұрын

    • Yeah they get dirty just like normal wheels from break dust and other things. With the 2K clear the one which is used on the cars body panels paint a very long time I refurbished my cousins tyres on his AMG about two years ago and they still look the same as the day I painted them.

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy also how many cans of the black paint did you end up using ?

      @OrderFromPain@OrderFromPain2 жыл бұрын

    • On this job I used to cans since I did the front and back of the wheels

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy so 2 cans for all 4 wheels?

      @OrderFromPain@OrderFromPain2 жыл бұрын

    • Yeah two cans of Gloss black, Etch primer, and 2 cans of the clear if you want to use the same products I got links in the description or you could always try your local autobody near you 😁

      @The_journeyy@The_journeyy2 жыл бұрын

  • Awesome! Could you please come do mine. Very nice job - professional look.

    @leisiaduskin596@leisiaduskin596 Жыл бұрын

    • Hi Leisia thank you for the kind words I would if I only had time 😊

      @The_journeyy@The_journeyy Жыл бұрын

  • How long does primer have to dry

    @freddiehastings7844@freddiehastings7844 Жыл бұрын

    • It depends on your environment and how hot or cold it is where your spraying. I spray mine outside with the the temperature around 17 to 20 degrees left it like 15-30 minutes to dry. If I was in a hot garage I could have left it for 5-10 minutes

      @The_journeyy@The_journeyy Жыл бұрын

  • So after doing the 3rd coat you wait over night before you wet sand?

    @francovargas3262@francovargas3262 Жыл бұрын

    • Hi Franco before I sand what the primer?

      @The_journeyy@The_journeyy Жыл бұрын

    • @@The_journeyy yes the primer sorry for not being clear

      @francovargas3262@francovargas3262 Жыл бұрын

    • No worries bro I left it overnight because that's just a preference of mine means I don't have to spend so many hours spraying in one day you can leave it a couple of hours until it's dry and then wet sand 😊

      @The_journeyy@The_journeyy Жыл бұрын

    • Thanks so much I appreciate the tip sir 👍

      @francovargas3262@francovargas3262 Жыл бұрын

  • Now paint the garden wall behind you 😁

    @dominicmolloy561@dominicmolloy56111 ай бұрын

    • On it now 😂

      @The_journeyy@The_journeyy11 ай бұрын

  • How many cans of primer and paint spray you had to use for all these wheels?

    @princealam9967@princealam99672 жыл бұрын

    • 2 cans of each, etch primer, base , and clear if your wondering about any other products used I've put it in the description hope that helps

      @The_journeyy@The_journeyy2 жыл бұрын

    • @@The_journeyy so 2 cans of primer and 2 cans of paint total?

      @Certiwhipps@Certiwhipps2 жыл бұрын

    • Hi Zain, that's correct 😄

      @The_journeyy@The_journeyy2 жыл бұрын

  • Can I still do this without taking my alloy wheels off the vehicle?

    @majesticblasian651@majesticblasian651 Жыл бұрын

    • kzhead.info/sun/d8qPdZt5qoSbaJs/bejne.html Yes you can do it without taking the wheels off

      @The_journeyy@The_journeyy Жыл бұрын

  • How many cans of each did you use?

    @shubyz@shubyz10 ай бұрын

    • Hi here is the list of items used: Items used in video: 1- Masking tape - ebay.us/o8cm6F 1 - Tack Rags - ebay.us/F0RxGn 1- 3M Facemask - ebay.us/4EHZGm 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 1 - Red Scotch Bright - ebay.us/KeivOr 1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7 1- Panel Wipe - ebay.us/OG3qpL 1 - BOX of Gloves - ebay.us/vcMjnM 1 Meguiars Ultimate Compound - ebay.us/7FrpIU 1 - Panel Wipe - ebay.us/UJfurk 1- Plastic Bin Bags

      @The_journeyy@The_journeyy10 ай бұрын
KZhead