www.paypal.me/PHARRAWAY THANK YOU LET'S REACH 20,000 SUBSCRIBERS CLICK THAT SUB BUTTON
Пікірлер
I'd be proud to have a set of wheels painted that good on my car.
@bingster-2234 жыл бұрын
Just a little suggestion to everybody, I would take the center cap off then paint them separately. When whoever goes to balance the wheels, they might peel the paint up when taking the center cap off.
@aintmybabyfour3 жыл бұрын
I've watched so many of your videos on painting but have never painted anything until now. I painted the inside of my nephews rims on his mini cooper last night using your guidelines and they turned out so amazing!!! Painting the front of them tomorrow and hoping for the same results. Love the videos and the fact that you're sharing your skills and knowledge for those of us who want to do this, but are a little timid to "pull the trigger." Been subbed for a while, finally putting some of your knowledge to use.
@dmalott09084 жыл бұрын
Woke up this morning and decided I want to properly paint my wheels so I came here to learn. Thanks for your video!
@accuratein044 жыл бұрын
After watching your video I'm excited and can't wait to get started on my rims tomorrow. I'm going to follow your exact steps.
@chasinggreatness423 жыл бұрын
Nice to see someone demonstrating the REAL and most PROFESSIONAL way of painting ur rims. Great video bro! Gonna paint mine that exact same way thanx 👍 subbed....
@TENNESSEETRACKHAWK4 жыл бұрын
Thanks brother
@ark_invest_2024.4 жыл бұрын
The most professional way would be to take the tyres off the rims
@craigglossop45954 жыл бұрын
@@craigglossop4595 and have it in a fully dust proof room. You can do this by a special film you tape around you walls and air purifier
@goatpier75702 жыл бұрын
That Finish is like glass! Nice work 👌
@jamlee3444 жыл бұрын
I love this vid I watch it all the time lol with my full-time job I don't get to paint much so honestly watching these vids keep me inspired
@JuanMejia-lc7he4 жыл бұрын
That is classic admission there…..the things I nerd out on inexplicably
@ManBolo54322 ай бұрын
That was a very professional done. Love the colors brother❤🙌
@youngone6974 жыл бұрын
Looking good 👌🏼 The paintjob came out very nice 👍🏼
@paintbydenn4 жыл бұрын
my man you got down! appreciate you spreading the knowledge & happy new year
@giovannogalindo87855 жыл бұрын
Thank You brother Happy New Year
@ark_invest_2024.5 жыл бұрын
Thanks for taking the time to video this and explaining the process.
@CVM222VOLT4 жыл бұрын
Love the video. Thanks for the constant good uploads!
@TylerLove5 жыл бұрын
Thank You brother Happy New Year
@ark_invest_2024.5 жыл бұрын
Great job, I did the same to my rims looks way better then before n I saved a lot money also. 👍
@tcreed11435 жыл бұрын
Nice yes they do come out better
@ark_invest_2024.5 жыл бұрын
Looks very good, thanks for taking the time to do videos for the "new" people trying to do something like this.
@reytinoco50193 жыл бұрын
No problem 👍
@ark_invest_2024.3 жыл бұрын
Thanks for sharing this with me from one fellow human being to another fellow human being great job on the painting job
@HelenDriggers-lm2cj5 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
I like how you made sure that the tabs on the rim protector were all in the same place near the tire valve
@camsac3 жыл бұрын
Love your work. Here is a tip that may help in the future. I let about 25% of the air out of the tire making the tire drop below the rim. You can push the tire down and its much easier taping the wheel/tire that way. The tape can get way under the rim. Paint the rim and simply re-inflate the tire. Keep up the great videos.
@MrProxl5 жыл бұрын
Yup that is a good tip I did let the air out completely forgot to mention that on the video oop's
@ark_invest_2024.5 жыл бұрын
Thank GOD a video without CRAP music playing in the background. THANK you for posting, great video, WAY better than the others here on YT.
@iwerkalone3 жыл бұрын
anytime brother
@ark_invest_2024.3 жыл бұрын
Your work is outstanding. Wish you were in Puerto Rico. Frank
@frankiebpr5 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Great video and great work. I wish the guy that I will give him my wheels of my Jeep SRT 2019 to paint does exactly the same as you. Keep up the good work!
@Vladesco9114 жыл бұрын
I just did not understand why you used different pressures for the paint and clear... Is there a particular reason for that?
@Vladesco9114 жыл бұрын
@@Vladesco911 Yes the clear flows out better and smoother with higher pressure
@ark_invest_2024.4 жыл бұрын
Hi BOSS, that turned out very nice, good work man. And the way you mask the wheel is very Good way/tips..see you on next video BOSS
@carlossweden49745 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Great job! Maybe look into a used tire machine to dismount the tire to cut back on the time it took to mask the tire from the paint target as the masking you showed looked brutal!
@kevinshea47764 жыл бұрын
Nice work bro, that's an awesome job you did, Wade Out.
@antoniowade3318 Жыл бұрын
Nice job .Waiting for your upcoming videos .
@HAMEED...5 жыл бұрын
Thanks It's coming up
@ark_invest_2024.5 жыл бұрын
They look incredible..
@douglasgreen437Ай бұрын
Awesome work! JUST A WONDERFULLY, AFFORDABLE WAY TO GET BAD ASS RIMS FROM YOUR BORING STOCKS
@jamie.7775 жыл бұрын
Like a boss!!! Looks good!
@thelizardking85253 жыл бұрын
Very nice man! 👍 What kind of paint did you use? Oil based?
@mh22885 жыл бұрын
Dam clean as hell
@Marcanthony_3104 жыл бұрын
Nice job, going to do that to my rims.
@kimfrank76585 жыл бұрын
nice brother
@ark_invest_2024.5 жыл бұрын
Very nice job bro just wondering which brand and ratio of the mixture are you using?
@cecilsarfraz84774 жыл бұрын
Hey pharraway , i know its an old video but do you adjust your gun settings? Your fan and fluid when spraying rims?
@theGAUSIN4 жыл бұрын
Patients and time good job bro 👍🏻
@jamesm97664 жыл бұрын
Thanks brother
@ark_invest_2024.4 жыл бұрын
I'm new to this, what kind of paint and gloss did you use. Can you be specific in name and brand. What kind of paint gun are you using? Can you put that info in the description of all the materials used?
@Mxyzptlk-kk2pg5 жыл бұрын
Didn't watch the primer stage , what king of adhesive primer did you use?
@benrobledo99799 ай бұрын
I bought a set of winter rims that are a bit gnarly looking and was considering some DIY painting to make them better. (I don't need show quality by any means....) Some questions from this video: - Any thoughts on using an electric turbine HVLP gun? Seems like this project is small enough that it should work? If not, what would you recommend for a non-professional on a budget? - For wheel prep, assume you are not going down to bare metal, just getting through factor clear / scuffing up paint a bit so that next adheres properly? - Are you using primer? - Any guidance on the brand / type of paint to use? Also, any thinning / modification? - For clearcoat, any specific recommendations due to exposure to elements / harsher cleaning chemicals rims get exposed to? - How much time are you typically leaving between coast of paint / clear / etc? - If someone has minor knicks / gouges in a rim any thoughts on how to fill that in? I believe there are some products for this purpose, though curious if any are better than others? Thanks!
@beyerch4 жыл бұрын
Hi, brother, you can get a husky paint gun from home depot they work good and about the paint here is a site that is on budget and will do good shop.thecoatingstore.com/Metallic-Paint_c48.htm just get yourself a quart they sale them in qt. kits with clear and all the reducers you need
@ark_invest_2024.4 жыл бұрын
What's your paint setup. I'm interested in learning a little more about painting that way? What spray gun is that? Is it easier painting that way then spray cans? Worth it to purchase that setup?
@proudcanuck4 жыл бұрын
Great job!!!!
@dnrm13 жыл бұрын
Amazing job man just had a near collision with a moron and scrapped my rim bad so this will give me a idea what ima need to get to fix it myself if possible lmk if this is the same method they use to paint cars aswell thanks for the video man
@jonathangomez31864 жыл бұрын
yes brother I got videos showing how
@ark_invest_2024.4 жыл бұрын
Hello pharraway I am looking back how you sprayed these wheels as I am starting tomorrow my ? Is dose the inside of the wheels. how money coats base and clear did you use and also is it a matter of choice if you wish to spray inside of wheels?
@husky12324 жыл бұрын
What would be some more affordable choices for a good paint gun that could pull this job off ?
@yahirgarcia50344 жыл бұрын
Awesome video!! What needle number did you use to spray the wheels?
@FishOn875 жыл бұрын
Excellent!!!
@nearheaven53115 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Nice and clean brother 👍
@frankreyna92814 жыл бұрын
Very nice job. Looks great.
@x-man50565 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
great video i did them before didnt use undercoat bugger do it again this week
@aussieone39883 жыл бұрын
Can you paint chrome rims? Just thinking of doing my cragar rims on my 91 camaro. They are in pretty rough shape with rust and pitting
@TheErms123453 жыл бұрын
Thanks alot for the help man! New to paint and this video helped alot before spraying a wheel set👍🏼
@LuisHernandez-de2nk3 жыл бұрын
Glad it helped
@ark_invest_2024.3 жыл бұрын
Well done!
@NAls-zm4fm4 жыл бұрын
What type of black colour did you use bro? There are few different types of black in my local store
@RawPunjabipodcast4 жыл бұрын
It would help to know How long did you stop in between coats until moving on to the next? Thanks
@illuminatedwulfcarrillo24834 жыл бұрын
Perfect!!!
@Leo-ti2cq5 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
That was a gud video bro
@udontknow52824 жыл бұрын
They look fresh af!!!
@arnoldchapa78234 жыл бұрын
Thanks brother
@ark_invest_2024.4 жыл бұрын
I've been looking for a wheel painting video that used a paint gun and not rattle can. What gun tips did you use and paint system? Did you clear the back side of the wheel the day before? Looks great!!!
@tomsti4 жыл бұрын
about the gun tip, it was a 1.3 tip and the paint system it was Urekem paint and yes I did paint the inside a day before
@ark_invest_2024.4 жыл бұрын
Looks good! Just hit he subscribe button. The only thing I would’ve done differently is brake the bead in the front side. But the job looks good.
@khouan75 жыл бұрын
The prep was more impressive than the finished product.
@fordawin78113 жыл бұрын
Looking good bro tryna do them for me 😭😂
@anthonyinfantas68054 жыл бұрын
Job Well Done!! I sub :)
@majackslelo8275 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Good video 📹 👍
@lchuckg50003 жыл бұрын
Hay guys I'm getting into refurbishing alloy and looking for knowledge would you call it but I've got a question when it come to spraying with a hvlp gun what do you do with the inside of the alloy that sits against the disc do u leave it or do it and what doe you do with the front with the weights on the inside with the tyre on the rim or doe you doe the face of the alloy kind regards Cameron
@CameronFry-tl9dr21 күн бұрын
Me encantan tus trabajos siempre te sigo bro
@javiertorres49213 жыл бұрын
Gracias amigo
@ark_invest_2024.3 жыл бұрын
Looks good man !
@Casloveskim4 жыл бұрын
Thank you
@ark_invest_2024.4 жыл бұрын
Amazing gloss.
@Duncv82 жыл бұрын
Good good job!
@mauricechappell83074 жыл бұрын
Nice job..i from malaysia
@hamirudinhalipah79432 жыл бұрын
Awesome.
@davenevarez47385 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Love the paint job, I would pay you to do mine
@slowmojoe695 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Very nice...just painted my rims also
@SprayWayCustoms5 жыл бұрын
Thank you brother
@ark_invest_2024.5 жыл бұрын
You have been using that Walcom 360 lately what's your feedback on it pros and cons. Nice job. Thanks !
@tjbii2nd5 жыл бұрын
yes it's one of the best guns that I have ever used I have nothing bad to say about it I have never had any issues with it
@ark_invest_2024.5 жыл бұрын
Bro u make that look so easy, painting rims isn't as easy as it looks coz of all the tight curves and the wheel nut holes, so easy to get a run if ur not careful
@BigG616sts3 жыл бұрын
Thanks 👍
@ark_invest_2024.3 жыл бұрын
HI there how nanny PINTS of paint, and also clear do you need for a set of wheels ? What about primer ? thanks for your help
@jasonmetro61724 жыл бұрын
How long did you wait in between coats of paint? I’m getting ready to paint the pro comp rims the same color as the body (Desert Gobi) as my 2017 Jeep JK 2 door. Currently the rims are black and have 37x12.50x17 Firestone destination MT2’s on them.
@waynejohnson33882 жыл бұрын
It's 15min between coats also for clear
@ark_invest_2024.2 жыл бұрын
Impeccable
@gedionsamuel22562 жыл бұрын
Awesome work* Do you have an opinion on weather of not to take the run off, painting it, then outting the tire on? Considering doing that for myself
@franklinviele23992 жыл бұрын
It depends on the customer
@ark_invest_2024.2 жыл бұрын
Great paint job on your wheels and mirrors, what is your compressor size and type of spray gun?
@roberthamilton23343 жыл бұрын
the compressor is a 60gal
@ark_invest_2024.3 жыл бұрын
You should cut up all the pieces of tape ahead of time so it not sitting their ripping them individually everytime over n over
@omartalavera69744 жыл бұрын
Morning bro from nyc. Did you also sand those mirrors with 320 grit
@brooklynsnowman84275 жыл бұрын
yes and then wet sand with 600 before painting
@ark_invest_2024.5 жыл бұрын
Long shot but what gun would you recomendable for beginners? Fixing my wheels at the moment and would like to paint with a gun rather than cans.
@julioramirez2399Ай бұрын
The NO NAME Z Gun from spraygunner
@ark_invest_2024.Ай бұрын
YOU ARE A REAL PROFESSIONAL!!!!!!!!!! did you mix the black color with clear coat ? the best video you are a master
@jorgevasquez-lz4be3 жыл бұрын
No added the Black color first and then applied the clear
@ark_invest_2024.3 жыл бұрын
THANKKKKK YOUU I am subscribed in your channel and i will keep looking your amazing videos
@jorgevasquez-lz4be3 жыл бұрын
@@jorgevasquez-lz4be Thank you and God Bless
@ark_invest_2024.3 жыл бұрын
Great job!!! Where do you get your paint , Where is a good place to get your paint match? Oreilly 's autoparts is a good place? what do your recommend? Thanks so much!!
@redlalo7775 жыл бұрын
I buy my paint at shop.thecoatingstore.com/main.sc and when I need a color match I go to my local paint supplier
@ark_invest_2024.5 жыл бұрын
@@ark_invest_2024. was it regular gloss black paint or wheel paint or what? That is the same place I ordered my Blue Ray Metallic paint kit from. Their prices and products are darn good.
@ls4.8frank4 жыл бұрын
That nice mister!!
@ronymejia77343 жыл бұрын
Dam 😍😍 them wheels
@edvinlopez94202 жыл бұрын
I really like your tape and cover method
@AutOdometer3 жыл бұрын
Thank you
@ark_invest_2024.3 жыл бұрын
Nice job on the wheels! What type of paint did you use for this?
@mikegoyette84692 жыл бұрын
Automotive paint
@ark_invest_2024.2 жыл бұрын
Hi ! Don't you put primer on ?
@aldowinnaar63794 жыл бұрын
how much paint and clear you used for those rims?
@nirvana96103 жыл бұрын
Hey Mr P.. I purchased one of the Gti Pro Like fake Devilbiss after your review, can I clean it with regular paint thinner or should I use something else. Thx for your videos...
@bluegrasscrazy73075 жыл бұрын
regular paint thinner will work fine
@ark_invest_2024.5 жыл бұрын
Do you use paint and primer? Or just paint
@medoeloll4 жыл бұрын
@PHARRAWAY how much base coat did You use to cover all 4 wheels?
@jakubjozwiakowski7735 Жыл бұрын
1qt of paint
@ark_invest_2024. Жыл бұрын
Hey brother what paint and clear did you use in this video? Exactly how I need to do my Silverado SS wheels. Thanks
@ls4.8frank4 жыл бұрын
It's from urekem
@ark_invest_2024.4 жыл бұрын
aye, holmes, first off a great job on those rims!!!!!! what kind of paint did you use? and where can I get it.... I'm trying to paint mines as well!
@meglo6124 жыл бұрын
Question bro. I’m good with no primer/ sealer? I painted rims (alloy)before and I used primer just because I didn’t want to mess up anything. Does this change based on if it’s chrome or alloy? Thanks bro!
@GradexAxGuy3 жыл бұрын
Yes it does if it's chrome or alloy you will need adhesion promoter and primer and or sealer
@ark_invest_2024.3 жыл бұрын
Beautiful
@sumerig44233 жыл бұрын
Thank you! Cheers!
@ark_invest_2024.3 жыл бұрын
Nice tutorial
@IPLAET75 жыл бұрын
Thank You brother
@ark_invest_2024.5 жыл бұрын
Do you happen to be from Pharr, TX lol?
@vicentesalinas82594 жыл бұрын
What is the best paint to use on rims? Will they get scratched up when changing tires or putting the weights on when they balance them?
@dmcbride633 жыл бұрын
automotive paint will be the best
@ark_invest_2024.3 жыл бұрын
Hey @pharraway how wide is your garage my garage is looking around same as yours and was wondering if you dont have any issues doing full cars in it
@CodyMcDonald895 жыл бұрын
It's 12ft wide and no I don't have any issues it works well
@ark_invest_2024.5 жыл бұрын
@@ark_invest_2024. thanks fore the reply! Unfortunately mine is only 11ft lol but isnt to bad at all its 23ft long though
@CodyMcDonald895 жыл бұрын
How long in between coats. Did you have have to retape the inner drum? Due to overspay from the top.
I'd be proud to have a set of wheels painted that good on my car.
Just a little suggestion to everybody, I would take the center cap off then paint them separately. When whoever goes to balance the wheels, they might peel the paint up when taking the center cap off.
I've watched so many of your videos on painting but have never painted anything until now. I painted the inside of my nephews rims on his mini cooper last night using your guidelines and they turned out so amazing!!! Painting the front of them tomorrow and hoping for the same results. Love the videos and the fact that you're sharing your skills and knowledge for those of us who want to do this, but are a little timid to "pull the trigger." Been subbed for a while, finally putting some of your knowledge to use.
Woke up this morning and decided I want to properly paint my wheels so I came here to learn. Thanks for your video!
After watching your video I'm excited and can't wait to get started on my rims tomorrow. I'm going to follow your exact steps.
Nice to see someone demonstrating the REAL and most PROFESSIONAL way of painting ur rims. Great video bro! Gonna paint mine that exact same way thanx 👍 subbed....
Thanks brother
The most professional way would be to take the tyres off the rims
@@craigglossop4595 and have it in a fully dust proof room. You can do this by a special film you tape around you walls and air purifier
That Finish is like glass! Nice work 👌
I love this vid I watch it all the time lol with my full-time job I don't get to paint much so honestly watching these vids keep me inspired
That is classic admission there…..the things I nerd out on inexplicably
That was a very professional done. Love the colors brother❤🙌
Looking good 👌🏼 The paintjob came out very nice 👍🏼
my man you got down! appreciate you spreading the knowledge & happy new year
Thank You brother Happy New Year
Thanks for taking the time to video this and explaining the process.
Love the video. Thanks for the constant good uploads!
Thank You brother Happy New Year
Great job, I did the same to my rims looks way better then before n I saved a lot money also. 👍
Nice yes they do come out better
Looks very good, thanks for taking the time to do videos for the "new" people trying to do something like this.
No problem 👍
Thanks for sharing this with me from one fellow human being to another fellow human being great job on the painting job
Thank You brother
I like how you made sure that the tabs on the rim protector were all in the same place near the tire valve
Love your work. Here is a tip that may help in the future. I let about 25% of the air out of the tire making the tire drop below the rim. You can push the tire down and its much easier taping the wheel/tire that way. The tape can get way under the rim. Paint the rim and simply re-inflate the tire. Keep up the great videos.
Yup that is a good tip I did let the air out completely forgot to mention that on the video oop's
Thank GOD a video without CRAP music playing in the background. THANK you for posting, great video, WAY better than the others here on YT.
anytime brother
Your work is outstanding. Wish you were in Puerto Rico. Frank
Thank You brother
Great video and great work. I wish the guy that I will give him my wheels of my Jeep SRT 2019 to paint does exactly the same as you. Keep up the good work!
I just did not understand why you used different pressures for the paint and clear... Is there a particular reason for that?
@@Vladesco911 Yes the clear flows out better and smoother with higher pressure
Hi BOSS, that turned out very nice, good work man. And the way you mask the wheel is very Good way/tips..see you on next video BOSS
Thank You brother
Great job! Maybe look into a used tire machine to dismount the tire to cut back on the time it took to mask the tire from the paint target as the masking you showed looked brutal!
Nice work bro, that's an awesome job you did, Wade Out.
Nice job .Waiting for your upcoming videos .
Thanks It's coming up
They look incredible..
Awesome work! JUST A WONDERFULLY, AFFORDABLE WAY TO GET BAD ASS RIMS FROM YOUR BORING STOCKS
Like a boss!!! Looks good!
Very nice man! 👍 What kind of paint did you use? Oil based?
Dam clean as hell
Nice job, going to do that to my rims.
nice brother
Very nice job bro just wondering which brand and ratio of the mixture are you using?
Hey pharraway , i know its an old video but do you adjust your gun settings? Your fan and fluid when spraying rims?
Patients and time good job bro 👍🏻
Thanks brother
I'm new to this, what kind of paint and gloss did you use. Can you be specific in name and brand. What kind of paint gun are you using? Can you put that info in the description of all the materials used?
Didn't watch the primer stage , what king of adhesive primer did you use?
I bought a set of winter rims that are a bit gnarly looking and was considering some DIY painting to make them better. (I don't need show quality by any means....) Some questions from this video: - Any thoughts on using an electric turbine HVLP gun? Seems like this project is small enough that it should work? If not, what would you recommend for a non-professional on a budget? - For wheel prep, assume you are not going down to bare metal, just getting through factor clear / scuffing up paint a bit so that next adheres properly? - Are you using primer? - Any guidance on the brand / type of paint to use? Also, any thinning / modification? - For clearcoat, any specific recommendations due to exposure to elements / harsher cleaning chemicals rims get exposed to? - How much time are you typically leaving between coast of paint / clear / etc? - If someone has minor knicks / gouges in a rim any thoughts on how to fill that in? I believe there are some products for this purpose, though curious if any are better than others? Thanks!
Hi, brother, you can get a husky paint gun from home depot they work good and about the paint here is a site that is on budget and will do good shop.thecoatingstore.com/Metallic-Paint_c48.htm just get yourself a quart they sale them in qt. kits with clear and all the reducers you need
What's your paint setup. I'm interested in learning a little more about painting that way? What spray gun is that? Is it easier painting that way then spray cans? Worth it to purchase that setup?
Great job!!!!
Amazing job man just had a near collision with a moron and scrapped my rim bad so this will give me a idea what ima need to get to fix it myself if possible lmk if this is the same method they use to paint cars aswell thanks for the video man
yes brother I got videos showing how
Hello pharraway I am looking back how you sprayed these wheels as I am starting tomorrow my ? Is dose the inside of the wheels. how money coats base and clear did you use and also is it a matter of choice if you wish to spray inside of wheels?
What would be some more affordable choices for a good paint gun that could pull this job off ?
Awesome video!! What needle number did you use to spray the wheels?
Excellent!!!
Thank You brother
Nice and clean brother 👍
Very nice job. Looks great.
Thank You brother
great video i did them before didnt use undercoat bugger do it again this week
Can you paint chrome rims? Just thinking of doing my cragar rims on my 91 camaro. They are in pretty rough shape with rust and pitting
Thanks alot for the help man! New to paint and this video helped alot before spraying a wheel set👍🏼
Glad it helped
Well done!
What type of black colour did you use bro? There are few different types of black in my local store
It would help to know How long did you stop in between coats until moving on to the next? Thanks
Perfect!!!
Thank You brother
That was a gud video bro
They look fresh af!!!
Thanks brother
I've been looking for a wheel painting video that used a paint gun and not rattle can. What gun tips did you use and paint system? Did you clear the back side of the wheel the day before? Looks great!!!
about the gun tip, it was a 1.3 tip and the paint system it was Urekem paint and yes I did paint the inside a day before
Looks good! Just hit he subscribe button. The only thing I would’ve done differently is brake the bead in the front side. But the job looks good.
The prep was more impressive than the finished product.
Looking good bro tryna do them for me 😭😂
Job Well Done!! I sub :)
Thank You brother
Good video 📹 👍
Hay guys I'm getting into refurbishing alloy and looking for knowledge would you call it but I've got a question when it come to spraying with a hvlp gun what do you do with the inside of the alloy that sits against the disc do u leave it or do it and what doe you do with the front with the weights on the inside with the tyre on the rim or doe you doe the face of the alloy kind regards Cameron
Me encantan tus trabajos siempre te sigo bro
Gracias amigo
Looks good man !
Thank you
Amazing gloss.
Good good job!
Nice job..i from malaysia
Awesome.
Thank You brother
Love the paint job, I would pay you to do mine
Thank You brother
Very nice...just painted my rims also
Thank you brother
You have been using that Walcom 360 lately what's your feedback on it pros and cons. Nice job. Thanks !
yes it's one of the best guns that I have ever used I have nothing bad to say about it I have never had any issues with it
Bro u make that look so easy, painting rims isn't as easy as it looks coz of all the tight curves and the wheel nut holes, so easy to get a run if ur not careful
Thanks 👍
HI there how nanny PINTS of paint, and also clear do you need for a set of wheels ? What about primer ? thanks for your help
How long did you wait in between coats of paint? I’m getting ready to paint the pro comp rims the same color as the body (Desert Gobi) as my 2017 Jeep JK 2 door. Currently the rims are black and have 37x12.50x17 Firestone destination MT2’s on them.
It's 15min between coats also for clear
Impeccable
Awesome work* Do you have an opinion on weather of not to take the run off, painting it, then outting the tire on? Considering doing that for myself
It depends on the customer
Great paint job on your wheels and mirrors, what is your compressor size and type of spray gun?
the compressor is a 60gal
You should cut up all the pieces of tape ahead of time so it not sitting their ripping them individually everytime over n over
Morning bro from nyc. Did you also sand those mirrors with 320 grit
yes and then wet sand with 600 before painting
Long shot but what gun would you recomendable for beginners? Fixing my wheels at the moment and would like to paint with a gun rather than cans.
The NO NAME Z Gun from spraygunner
YOU ARE A REAL PROFESSIONAL!!!!!!!!!! did you mix the black color with clear coat ? the best video you are a master
No added the Black color first and then applied the clear
THANKKKKK YOUU I am subscribed in your channel and i will keep looking your amazing videos
@@jorgevasquez-lz4be Thank you and God Bless
Great job!!! Where do you get your paint , Where is a good place to get your paint match? Oreilly 's autoparts is a good place? what do your recommend? Thanks so much!!
I buy my paint at shop.thecoatingstore.com/main.sc and when I need a color match I go to my local paint supplier
@@ark_invest_2024. was it regular gloss black paint or wheel paint or what? That is the same place I ordered my Blue Ray Metallic paint kit from. Their prices and products are darn good.
That nice mister!!
Dam 😍😍 them wheels
I really like your tape and cover method
Thank you
Nice job on the wheels! What type of paint did you use for this?
Automotive paint
Hi ! Don't you put primer on ?
how much paint and clear you used for those rims?
Hey Mr P.. I purchased one of the Gti Pro Like fake Devilbiss after your review, can I clean it with regular paint thinner or should I use something else. Thx for your videos...
regular paint thinner will work fine
Do you use paint and primer? Or just paint
@PHARRAWAY how much base coat did You use to cover all 4 wheels?
1qt of paint
Hey brother what paint and clear did you use in this video? Exactly how I need to do my Silverado SS wheels. Thanks
It's from urekem
aye, holmes, first off a great job on those rims!!!!!! what kind of paint did you use? and where can I get it.... I'm trying to paint mines as well!
Question bro. I’m good with no primer/ sealer? I painted rims (alloy)before and I used primer just because I didn’t want to mess up anything. Does this change based on if it’s chrome or alloy? Thanks bro!
Yes it does if it's chrome or alloy you will need adhesion promoter and primer and or sealer
Beautiful
Thank you! Cheers!
Nice tutorial
Thank You brother
Do you happen to be from Pharr, TX lol?
What is the best paint to use on rims? Will they get scratched up when changing tires or putting the weights on when they balance them?
automotive paint will be the best
Hey @pharraway how wide is your garage my garage is looking around same as yours and was wondering if you dont have any issues doing full cars in it
It's 12ft wide and no I don't have any issues it works well
@@ark_invest_2024. thanks fore the reply! Unfortunately mine is only 11ft lol but isnt to bad at all its 23ft long though
How long in between coats. Did you have have to retape the inner drum? Due to overspay from the top.
10min