How to Make off a SWA Gland | Steel Wire Armoured Cable Install
In this video i will show you an easy way to install a SWA cable and fit an earth gland and earth nut to the steel wire armoured cable. I will show you exactly how to connect this into an outdoor junction box. I will guide you through step by step. If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
Find the products you need for this job here: amzn.to/3k8O6Tv
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
amzn.to/2XA4qoG
amzn.to/3y5v7hM
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The DIY Guy may earn affiliate commission if you purchase via the recommended links. These links will not cost you any extra.
If you are not confident undertaking electrical work then you should have this work undertaken by a qualified electrician.
Wish all DIY vids were this clear and full of the little tips that make the difference. I like the preview of the next step in fast motion at the end, helps.
Glad it was helpful!
Mate, you are a diamond! This is what KZhead is so good for. Brilliant tutorial, really well explained, especially the trick of using the hacksaw to score the wire. Followed your instructions exactly and nailed it. Thank you.
For crying out loud... Wish I'd seen this last week, using the hacksaw to score the armoured cabling would have saved me a lot of headaches! Thanks for a great vid.
Brilliant video as I installed waterproof sockets but couldn't remember the bit about the wedding ring, easy peasy!😁 You're a star ⭐
My first comment it years but needed to say I was just a bit worried about doing an outdoor connection but youve made it nice and clear. Excellent video!
Great to hear!
Excellent video👍 clear and informative. One thing worth mentioning is that the steel wire armour should not be visible at the bottom of the gland assembly when you've tightened up the last waterproof nut with the rubber seal. If it is then the armour has been cut too long and the gland is not waterproof, despite the outer rubber shroud.
good point , many people make the same mistake
Yes I was thinking the same
It’s a lot easier to push the shroud over the cable and the part of the gland needed before you expose the steel wires that can make it harder to do this
😮
Excellent demonstration. I wish I'd known about the earth locking nut. Back to the shops.
Very informative and professional 👍
Fantastically well explained - thanks!
Thank you, video was excellent exactly what I needed.
Thanks!
Sparky quoted me £300 to do 4 of these, thanks a lot. Didn't think it would be that difficult .
👍
Thanks for the great video. This will be my weekend project.
😁
Very clear and straightforward video.
Glad it was helpful!
Amazing explanation. Thank you so much
Brilliant video, exactly what i needed. Cheers man
Anytime 👍
Excellent. Just what I was after. Thanks
Your welcome. Thanks
Top man got me a job now mate thanks
Great info, I got a pond to do and a shed so was just concerned how to do it. Now I have some understanding. Thankyou
No problem 👍
Great video very well explained 👍👍👍
Thanks 👍
Thanks for this mate. Very helpful
Your welcome
Excellent video very clear and concise, and a Bacho spanner.
Thanks 🙏
Good stuff keep the contents coming 👍
Great video thanks. I've got 7 of these to do tomorrow. Subscribed and liked 👍
Very welcome
Great explanation
All your video are excellent and very informative
Thanks
Brilliant Video, Thank You.
Your welcome
Excellent video clear consice and well covered
Glad it was helpful!
Great video, very helpful. Thanks
Your welcome 👍
Genuinely great video. Very informative and well paced
That's great to hear, thanks
Great video and so easy to follow great job
Thanks, glad it was helpful
@@TheDIYGuy1 I took my swa from my old concrete shed via a waterproof connector the wires were different from the power in my old shed red,green,blue, and my 2.5mm colours were black , brown, grey . Can you recommend a CU for my shed taking in mind it will be supplying to 4 sockets 2 small led strip lights and a light switch.
Great video . Thank you
Great vid as usual 👍👍👍 thank you
Exactly how it was taught to me at college.
Well done 👏
👍
Very helpful. Thanks.
Your welcome 👍
Amazing thank you!
Anytime
Clear and Concise video.
Thanks, glad it was helpful
@@TheDIYGuy1 I am in the gas plumbing trade. So the 'the know how' of the task u were explaining was not new to my eyes. But I was very impressed with your steady way of communication. Speaking clearly and not waffling in your video must have been really positive for any newbie watching. Keep up your flow and keep your videos coming.
Easy listening not a load of faff like some Will watch more of your videos thanks
Thanks 👍
Great help,top man.😊
Your welcome
Great video
Thanks, glad it helped
Good video mate
Thanks, glad you liked it
Well done
👍
Brilliant!
Thanks
1st Class thank you
Your welcome
Great and informative video. Can you use wago connections for outside junction box? What is the name of the connectors you used to connect the wiring at the end?
Great video - very helpful can you link me to the next where you complete the box? Cheers!
Thanks 👍
Have you done a video on installing a small garage/shed consumer unit?
Hi mate, In my house we have 1 junction box (Outdoor) and from there 2 SWA cable 2.5mm come out for 2 different areas. They are plugs but we use them for lighting and charging some battery tools in the garage. I'm worried maybe the consumption is not dangerous or maybe the installation. Excellent video mate!
Good job
Thanks
Thanks. I’ll get a sparkie. 😃
Top!
👍
Great video, do you have a video how to connect to the house consumer unit or mains
Thanks. I'm afraid I don't.
@@TheDIYGuy1 I need some advice and hope you can help. I've installed a BG consular unit in my garage and run armod cable to the house. What is the best way to connect to the house power supply?
Great video! Regarding scraping the paint on a metal enclosure, if the metal enclosure has a earth stud/terminal in it for the earth lead from the banjo/earth nut to attach to, is scraping paint necessary?
Great video, very helpful! I'm looking to make off an SWA gland on a SWA Ethernet cable into a very similar junction box - does the SWA still need earthing? And if so, how would I do this, given there won't be an earth to connect to? I can't find anything online that covers this and it's driving me crazy haha
Mate this is EXACTLY what I needed to see. One question tho, I'm using 4mm SWA to power & light a log cabin. What kind of cable do I send through the wall to the main house consumer unit?
Use the SWA cable as it provides mechanical protection while going through a brick wall
Great video, can you spur off any ring mains socket providing you add a fuse spur? I.e. when all ring sockets are already protected by a RCD at the board?
Yes, in theory, you shouldn't spur off a spur but fuse it with 13amp fuse.
Great video thanks. I'm planning on installing an outdoor socket from a socket in summer house and this will help. When it comes to the socket, should I also use the earthing nut and earthing cable on it?
Glad it helped
So nice sir❤💗💗💖💕👌👌👌👌👌👌👌👌👌👌👌👌👌
Glad you enjoyed it
Great video, very simple to follow and easy to understand. Can I ask, what do you use to cut the cable to length? I have bought a 25m roll of armoured cable but need to cut it at around 18m.
I still use a hacksaw for this but you can get purpose built cutters.
@@TheDIYGuy1 Thanks for the reply.
Use an angle grinder, quick and easy
Hi mate. When you have 4 core, red, blue, black, yellow, is the connection to the meta box (metal stands) to CPC of the 4 core as no CPC in the 4 core.
Perfect Vid for what i'm doing. Lots of detail which is perfect. Quick question. Where i wanted to terminate my armoured cable into an Outdoor Weatherproof Junction Box is few feet from a water butt . Is this a problem as regards regulations? Thanks in advance and keep the vids coming
It should be fine, the only time this would have trouble for regulations is when you're installing it in a "special location" a.k.a a bathroom, if you're still worried use a higher IPX grade junction box
Veri good idia i am india
Where do you get the earthing strap from?
Hi, Mind if I ask if the armoured cable for safety when feeding electric out to say an outbuilding/garage type situation? and would that then connect into a consumer unit? Great video thanks!
Armoured cable is normally the safest choice if you're running to a garage or an outbuilding, ideally the cable will be buried but you can clip along a wall, fence etc. if you don't mind having it on display.
Regarding the wire you have running though your house that is connected to your MAIN fuse box. is this of it's own RCB? is so what Amp? like to see the mains board. Thanks!
How’s it going, what sealant did you use around the cable going through the wall into the house?
You can use any good sealant such as CT1
Great Video, But always follow BS 7671 and manufacturers instructions, Part P is the building regs pertaining to notifiable works
Part P applies here because installing SWA could be part of a job that would be notifiable work, e.g adding an additional circuit for an outbuilding.
Do we need to the earthing of the gland if using an internal istallation
Yes you do.
Where did you then connect the earth wire from the SWA nut to earth it? To a socket?
You connect it with the earth coming from the consumer unit, use a WAGO 221 2-way connector to attach them together or if the junction box is metal or has an additional earthing terminal inside the box (usually found in the corner of a box) you will need a 3-way WAGO 221 connector to add an additional earth wire to the box :)
Quick few questions So what are you connecting the SWA to. Is that just 2.5 twin and earth from the ring main. And on the otherside at the shed for example would you do the same. Connect it to 2.5 twin and earth using terminal blocks and then connect up your sockets Secondly the SWA i saw online has difference colour cable. Grey, black and brown. Is this the same stuff. Also I was going to trail the cable underground in conduit. Have you got it under the slabs?
Also is that 2.5mm2
Spot on. Good video.
What are those connectors used to join the cables, if you can send a link that would be grat thanks
Wago connectors 😊
Hi.. your latest video has the comments turned off..is there any reason for this? I find other peoples comments quite useful.
Do you need an earthing nut if it's in a plastic case?
Yes as it's earthing the metal wires (armor) within the Armoured cable
I've been looking at SWA cable at screw fix 2.5 armoured. The colour are gray,brown,black? Your armoured cable in the video is blue,brown,earth Dan
You have 3 phase colours, the black and grey can be sleeved with blue and green + yellow sleeve for single phase application, did this an hour ago 😉
What size of armoured cable did you use for this job do I just search 1.5 3 core
2.5mm
great video, just what I needed & thank you so much. What size is the earth fly lead please (6mm?)
Your welcome 👍
Great video although my armoured cable colours are black, grey and brown!
Thanks
Better using a SWA cable stripper it looks like a plumbers pipe cutter and you just move it round and round the cable it cuts through the wire as well
Yeah seen those, I may have to get one
Put the shroud over the cable before anything else, dont want to install the cable to realise you need to take it all apart again because you've forgotten to put the shroud on. I have done that before lol
there is a much easier way than faffing about with a hacksaw simply use a standard plumbers adjustable pipe cutter, it will cut through the outer sheath and score the armour wires in seconds perfectly straight around the cable
Hi, Great vid massive help. Question: i need to power man cave and wouldn’t mind an outdoor socket too. Can I take the power from inside 13amp socket, to outdoor water tight socket, then SWA from that socket to cave ? I’d the. Want to run lights and sockets off the other end in the cave. Any info would be greatly appreciated! Thanks again for these vids
Apart from the clear explanation, I compliment you on the editing and sound quality and - glory be - no effin background music 🙂
Hello what size armour cable would you recommend for a pond .cable will be about 20 metres long
Banjo not approved for use on plastic box unless double nutted Also earth tail looks too small for a yellow 4/6mm csa crimp
A bit more armour exposed than I would, but WELL DONE, "the diy guy" shows how a 2022 SWA is terminated with the Banjo in the BIN!!! If you are under the age of 80 Banjos should not be part of your life!
😆
What you've been looking for the PU Chemical for your this waterproof junction box gasket foam with Waterproof and fireproofing function, should be here kzhead.info/sun/asWqg8WZmn-Ym58/bejne.html
I would never do that! I would slide the gland over the wire first then take the outer insulation off and bend and cut the Armoured steel off. I would never show someone how to take a saw to it with that last bit of wire going underground 😮
Great video
Thanks, glad you found it helpful