KZhead
Автокөліктер мен көлік құралдары

How Crankshaft Casting Process Are Done || Complete Casting Process of Crankshafts Inside Foundry

Amazing Things Official
2022 ж. 2 Ақп.
3 571 865 Рет қаралды
Жүктеу

Cast Cranks are created by pouring molten material (typically cast iron) into a mold to create a raw casting. The benefits of this process casting include lower cost, inexpensive tooling, and minimal machining required to produce a finished product
#crankshaftcastingprocess #sandcastingcrankshaft #ironcrankshaftcadting

Пікірлер

  • I have been watching several of these type of videos over the past couple of days and I can’t get over the fact that these guys don’t have any personal protection equipment. The only have t-shirts and sandals. I use to be a refractory tech, I can’t imagine this in any steel shop or casting factory in Europe. OMG. Respect for these people and their craft is the least we can do.

    @philipdebacker@philipdebacker2 жыл бұрын

    • Then when they're disfigured, they're outcast

      @Samsgarden@Samsgarden2 жыл бұрын

    • Think back to the 1910-25 times in the labor world.

      @soisaidtogod4248@soisaidtogod4248 Жыл бұрын

    • Safety is overrated

      @tehonlynoobs5556@tehonlynoobs5556 Жыл бұрын

    • watch out Belgaum foundry vlog kzhead.info/sun/oqeBfLqNkGlpZ5E/bejne.html

      @omkards8731@omkards8731 Жыл бұрын

    • They are the real heroes of any economy. Therefore the owners of such factories need to provide the safety equipment so that they may keep on contributing to the uplift of the living standards of their fellow County men.

      @MuhammadNawaz-bj3zi@MuhammadNawaz-bj3zi Жыл бұрын

  • The guy at the end actually was wearing proper shoes and jeans and a shirt. Progress is being made 👏

    @Engineer9736@Engineer9736 Жыл бұрын

  • The steel used for casting is precisely measured for each elements in the alloy. The grain structure of the steel of also perfectly controlled for temperature at all steps.

    @marutanray@marutanray Жыл бұрын

    • Ahahhahahahahahahhahhahahahaha....yeh right.

      @ddrowdy7666@ddrowdy76669 ай бұрын

    • @@ddrowdy7666 Come on mate the old filing cabinets, baked bean tins and general old shite was precisely measured to make a alloy so perfect you could easily expect to get at least a thousand miles from them crankshafts.

      @leaflee2066@leaflee20669 ай бұрын

    • Yes great that's my factory there we can make crank shaft and lots of other parts

      @maliktahir3371@maliktahir33718 ай бұрын

    • @@leaflee2066 🤣😂

      @wojtas-4@wojtas-46 ай бұрын

  • The formula for the ingredients is a closely guarded secret and as you can see, safety is of prime importance.

    @jimh8644@jimh86442 жыл бұрын

    • 😅🤣

      @Ozsmallbore@Ozsmallbore Жыл бұрын

    • I love irony.

      @eddiemill6600@eddiemill6600 Жыл бұрын

    • They always keep a clean Shop floor... OSHA approved Sandals (except when using the patented barefoot mold compression) And safety with molten Iron? Second to EVERYONE!! 😋😲😅

      @CarmineRC@CarmineRC Жыл бұрын

    • @@CarmineRC Steel open-toes sandals are made by Red Wing. OSHA approved, also gloves, aprons and safety goggles are approved but seldom used, they constrict the worker.......

      @caddyrack@caddyrack Жыл бұрын

    • @@caddyrack Humans are replaceable machines are not.

      @drscopeify@drscopeify10 ай бұрын

  • I wonder how often they check the metal composition of the mix given they are using various scrap ... lol 😆. Also, surprisingly they moved it while the crank was still bright orange... It is impressive what they are doing with what they have. Interesting glimpse into their second industrial revolution...

    @harrycee656@harrycee6562 жыл бұрын

    • That scrap looks like the leftover's from a press cutting process so maybe the metal source/ composition is consecvent

      @christianrazvan@christianrazvan2 жыл бұрын

    • Интересно зачем они вообще это отливают. Коленвал из этого не сделать. Они по-другому делаются.

      @user-ec2cd7sc4c@user-ec2cd7sc4c2 жыл бұрын

    • Just kind of throw them in the ally while still red hot. I'm sure there's no warpage

      @hl8256@hl8256 Жыл бұрын

    • Youre right!

      @ricksuarez9653@ricksuarez9653 Жыл бұрын

    • Aluminium scrap = almunium shaft. Most engine are made up of aluminium which don't last as long as steel.

      @beniceandhappy@beniceandhappy Жыл бұрын

  • The care, and attention under such harsh conditions is absolutely amazing. Thanks for sharing.

    @BudoReflex@BudoReflex2 жыл бұрын

    • You do realize that's the way it used to be done all over the world 75 to 100 years ago, with the exception of still doing it in much better & cleaner surroundings. They do work hard, but call me what you want, its stupidity to work without safety procedures! Any sane person would NEVER work around molten metal, & in those conditions barefoot, that's just stupid.

      @timothygeiger8271@timothygeiger82712 жыл бұрын

    • @@timothygeiger8271 ฉันคิดว่า.. นี้คือการต่อสู้.สำหรับ​ประเทศที่ยังยากจน.. และจำเป็นเพื่อความอยู่รอด.. ไม่ไช่มาดูถูกดูแคลน.ดูแคลน.. ความเป็นมนุษย​์กัน.. เพราะเขาขาดเครื่องมือ​ที่ไช้ระบบเทคโนโลยี.. แสนแพงที่ประเทศ.. พัฒนา​เขามี.. เขาไม่ไช่คนโง่หรอก... คนโง่คือคุณ.. หากคุณ.เกิดในประเทศนี้.. คุณจะทำอย่างไร.. ไห้ได้มาซึ่งสิ่งที่ต้องการละ.. สมองนายควรได่รับการแก้ไขแล้วละเพื่อน.. ไม่ไช่เขาโง่.. แต่เขาไม่มีเงินมากพอ.. ที่จะไปจัดสรร​เครื่องมือดีๆ.มาไช้ด้าน.. อุตสาหกรรม.. ยานยนต์.ต่างหาก..

      @nakon5218@nakon5218 Жыл бұрын

    • @@nakon5218 translate to English please?

      @timothygeiger8271@timothygeiger8271 Жыл бұрын

    • @@timothygeiger8271 Pretty much saying not to insult them because they cant afford that stuff. Thats the gist of it

      @SexyEarHair@SexyEarHair Жыл бұрын

    • @@SexyEarHair i don't think saying they use outdated technology & equipment as an insult.

      @timothygeiger8271@timothygeiger8271 Жыл бұрын

  • Never seen such good quality control.

    @brianwoznik9868@brianwoznik98682 жыл бұрын

    • Why not throw some Bedsprings in there as well, making Cranks for engines like this, give your heads a shake

      @carlmason4153@carlmason4153 Жыл бұрын

    • @@carlmason4153 cause they sold it in low price too my friend and the one whose bought it already know the fact

      @Qim2609@Qim2609 Жыл бұрын

    • Make for what the local market can afford.

      @soisaidtogod4248@soisaidtogod4248 Жыл бұрын

    • Thats how the real capitalism works (for other countries)

      @TheMrGREENRay@TheMrGREENRay Жыл бұрын

    • @@TheMrGREENRay Hiya Stan After working the third world for years, this is how dictators like ya to be, live & work in Squalor. trust me seen it

      @carlmason4153@carlmason4153 Жыл бұрын

  • Respect to these guys. They may not have the latest tools or employed by multimillion companies but what they have is the skills to make stuffs from scratch.

    @roahnosh@roahnosh2 жыл бұрын

    • Siempre me pregunto como trabajan sin usar zapatos de seguridad ni ropa adecuada en esos tipos de trabajos peligrosos será que no tienen regulaciones en esos países

      @javiermoreno2820@javiermoreno2820 Жыл бұрын

    • ​@@javiermoreno2820 which is why Indian people die often from there work. And many don't make it even on local news.

      @finding.nirvana@finding.nirvana10 ай бұрын

    • @@javiermoreno2820 Не нравится не работай. Вот и весь трудовой договор. Тебе никто ничего не должен и ты никому ничего не должен.

      @alekseykirillov2359@alekseykirillov23592 ай бұрын

  • Парни просто бессмертные на всём этапе производства!

    @user-ib2hl9ci7k@user-ib2hl9ci7k2 жыл бұрын

  • You're correct Manuel. Their footwear in a molten metal environment amazed me as well.

    @itsjustme1949@itsjustme19492 жыл бұрын

    • and the OSHA approved "safety squint" works wonders, too. No need for expensive eye protection.

      @AffordBindEquipment@AffordBindEquipment2 жыл бұрын

    • They don't have access to propper footwear. They live in a poor country.

      @Cowboy_Foradalei@Cowboy_Foradalei2 жыл бұрын

    • I wonder how many lost their health in such conditions

      @worldobserver7889@worldobserver78892 жыл бұрын

    • I bet the skin on their feet is tougher than the leather of a Redwing boot.

      @tjsogmc@tjsogmc Жыл бұрын

    • They are wearing their regulation Safety Sandals and their Fire-Retardant Pajamas.

      @inisipisTV@inisipisTV11 ай бұрын

  • I worked in many iron foundries s but not like this hard work respect to these guys

    @caveman6988@caveman69882 жыл бұрын

  • Με αυτά τα μέσα σε αυτό το μέρος με ξιπολιτους ανθρώπους και μέσα στην ζεστά τους αξηζη ένα μεγάλο μπράβο και βγάζουν και καλά πράγματα

    @user-xj7kl6rz1w@user-xj7kl6rz1w2 жыл бұрын

  • Отважные пацаны, с расплавленым металлом в сланцах на голую ногу работают. У них походу такого понятия как охрана труда нету.😱😱😱😱😱😱

    @Sanya231986@Sanya2319862 жыл бұрын

    • Предки суровых челябинских мужЫков

      @user-vf6tw2gj8v@user-vf6tw2gj8v2 жыл бұрын

    • Охрана труда надзор всяких там начальствующих служб с кучей замов удорожает процесс производства Да и качество страдать может А на босу ногу все проще и дешевле опалил, следущий

      @9v999@9v9992 жыл бұрын

    • @@9v999 конечно пострадает!) А им нельзя марку понять!

      @Yeti809@Yeti8092 жыл бұрын

    • Ой нельзЯ нельзЯ

      @9v999@9v9992 жыл бұрын

    • Нет ума, нет страха, нет защиты. Все просто)

      @user-wz7je1lb7e@user-wz7je1lb7e2 жыл бұрын

  • When I worked in a steel mill with leather steel toed boots I was scared of getting my feet burnt or smashed so hats off to y'all

    @jamieanderson6222@jamieanderson62222 жыл бұрын

  • Now you know how those fine cast sheet metal inexpensive replacement tractor crankshafts are made. Good luck with your purchase.

    @billmiller7138@billmiller71382 жыл бұрын

    • This crankshaft is still working good after 1lakh km.... and it's very available at low cost...

      @87parabcustoms35@87parabcustoms352 жыл бұрын

    • Kanabi. The kif 🌿🌿🌿. The hashish. The karchach. it gives pleasure to work this way. Without any protection. That's why these pakistan 🇵🇰🇵🇰🇵🇰 work this way. With night clothes and on the floor. Like slaves.

      @abdellahzaidi1257@abdellahzaidi12572 жыл бұрын

    • The process in western countries is not very different actually. The critical thing here is to get the magnesium treatment done properly. Chemical analysis and timing is key factors. Much is based on now how of the leader of the casting. Nodular iron production is knowledge based.

      @Engineersoldinterstingstuff@Engineersoldinterstingstuff2 жыл бұрын

    • @@Engineersoldinterstingstuff I'm confident they have top notch metallurgists on staff. 😂

      @billmiller7138@billmiller71382 жыл бұрын

    • @@87parabcustoms35 oiiio9o ok ibu oooo

      @erikbayu4009@erikbayu40092 жыл бұрын

  • Such man would make a very good living in my country , they got the craftmanship and the mental and physical endurance most people cant even comprehend. It takes alot to do this work let alone under such harsh conditions and still turning out quality products, huge respect!!!

    @abaranihei2608@abaranihei2608 Жыл бұрын

  • Работать в литейке в сланцах- верх интеллекта😂😂😂

    @amdlops@amdlops2 жыл бұрын

    • скоро мы в россии так будем делать, потому что денег на обувь не будет, с текущим курсом доллара

      @vasiliygorn6462@vasiliygorn64622 жыл бұрын

    • @@vasiliygorn6462 в точку))))))

      @armanmutanov6769@armanmutanov67692 жыл бұрын

    • @@vasiliygorn6462 в валенках. С них капли металла скатываются😉

      @amdlops@amdlops2 жыл бұрын

    • @@vasiliygorn6462 а что не так с курсом?

      @user-dr3mp7xi9f@user-dr3mp7xi9f Жыл бұрын

    • ​@@vasiliygorn6462в России не делают обуви?

      @user-vc1nz4ff8w@user-vc1nz4ff8w Жыл бұрын

  • Absolute precision, one wrong move and your toes are gone forever.

    @johnsuperfresh@johnsuperfresh2 жыл бұрын

  • Great hand-casting, that guy with the air-compressor does a great job too, ends with a really good casting result.

    @VenturiLife@VenturiLife Жыл бұрын

  • Молодцы ваще ребята! Интересна марка стали "на глазок" А также закалка и цементация, а так конечно красавцы, импортозамещение у них не провалено.

    @thoughts_and_things@thoughts_and_things2 жыл бұрын

    • Это сталь марки КН (какую найдёшь), неужели не ясно?)))

      @valitovdenis@valitovdenis2 жыл бұрын

    • @@valitovdenis Точно, она.

      @thoughts_and_things@thoughts_and_things2 жыл бұрын

    • Это чугун сталь не льётся в формы будут одни раковины и полости только чугун льётся идеально ну еще медь свинец алюминий магний латунь но из них коленвал будет не прочьнвй

      @user-pf6et2tu5w@user-pf6et2tu5w Жыл бұрын

    • эта чугуний!

      @user-en4ii7wy4r@user-en4ii7wy4r Жыл бұрын

    • @@user-en4ii7wy4r солдат отправили на разгрузку в склад прапорщик им говорит бойцы сегодня будем разгружать алюминтий, его поправляет солдат товарищ прапорщик не алюминтий а алюминий правильно говорить Прапор такой отвечает ну если ты такой умный тогда иди разгружай чугунтий

      @user-pf6et2tu5w@user-pf6et2tu5w Жыл бұрын

  • Amazing,health and safety on high level Casting iron in sandals….amazing

    @tokomac7728@tokomac77282 жыл бұрын

  • Так вот где делают коленвал для Land Rover.🤣🤣

    @user-ij7me6bp4j@user-ij7me6bp4j2 жыл бұрын

    • 😂😂😂

      @antonisantonis655@antonisantonis6552 жыл бұрын

    • Бмв

      @user-lo7ik4ps4t@user-lo7ik4ps4t Жыл бұрын

    • Боюсь представить что с балансировкой этого чуда .

      @ZeMau@ZeMau Жыл бұрын

  • Wow this place is do professional , we should get more things over seas to be manufactured in places like this , I see this and it screams quality

    @dalpet3643@dalpet3643 Жыл бұрын

  • Talk about contamination & Inconsistent heat transfer . These guys do well with what tooling & equipment they have . I wouldn't use on in my engine . cheers

    @jasontroy4723@jasontroy47232 жыл бұрын

    • You probably have one and don't know it. Hehe

      @nainitalism@nainitalism2 жыл бұрын

    • @@whiteoakfarmsc2604 life is full of surprises

      @nainitalism@nainitalism2 жыл бұрын

    • @@nainitalism Righto pal .

      @jasontroy4723@jasontroy47232 жыл бұрын

    • @@jasontroy4723 no one tell u to use it loll😅

      @jahbaba7414@jahbaba74142 жыл бұрын

    • @@whiteoakfarmsc2604 wat u have or wat u have done great do u make part for car show us ur brand hahaha😂

      @jahbaba7414@jahbaba74142 жыл бұрын

  • A manufacturer carefully chooses the raw materials so the resulting steel is what the part requires and before pouring a sample is sent to the laboratory. These guys use what scrap is available. Also, crankshafts are forged not cast. Lastly, their choice of footwear in such dangerous enviornments never ceases to amaze me.

    @manuellongo4365@manuellongo43652 жыл бұрын

    • Maybe they sleep at the factory too for they wear pyjama's. It is if they woke up, drunk some tea for breakfast and went right to work without changing clothes.....it is kind of sad,

      @depausvandelilithkerk5785@depausvandelilithkerk57852 жыл бұрын

    • Well higher quality crankshafts are forged, a lot are still casted, But your completely right about the quality of the metal they are using lol.

      @gigalo86@gigalo862 жыл бұрын

    • @@gigalo86 it doesn't matter if the crankshaft is forged or casted as long as the metal has been ingenieered the right way and has been treated the right way. It depends on if you got good metallurgist at your company who can ingenieer the metal them selves or if you order it in bulk from the foundry. I think that they couldn't aford to buy it from a foundry and can't aford to hire good metallurgist so they are doing it the best they can with the means they have. It is kind of impressive what they are capable of but their product would be "a last choice" product or a "disposable use once" product (but a crankshaft is not ment to be such a product)

      @depausvandelilithkerk5785@depausvandelilithkerk57852 жыл бұрын

    • That is their conception of a sophisticated metal foundry, where molten metal burns aren't a big deal. :'D

      @WCKD.@WCKD.2 жыл бұрын

    • And that's why we watch 😊

      @MotorSwapDan@MotorSwapDan2 жыл бұрын

  • Так вот почему у ленд роверов ломаются коленвалы...

    @Andrydok@Andrydok2 жыл бұрын

    • Нужно им на сварку по гарантии возвращать)))

      @Vladimir-lz8fi@Vladimir-lz8fi2 жыл бұрын

    • А как вы определили что коленвал от Лэнд Ровер а если не секрет?)

      @rutravomalsi1830@rutravomalsi1830 Жыл бұрын

    • @@rutravomalsi1830 это шутка юмора, для понятливых...

      @Andrydok@Andrydok Жыл бұрын

    • @@rutravomalsi1830 только на роверах ломаются валы

      @Vladimir-lz8fi@Vladimir-lz8fi Жыл бұрын

  • Glad to see that you changed the thumbnail to more accurately represent the process. 👍🏻👍🏻

    @nobuckle40@nobuckle402 жыл бұрын

  • Increíble como trabajan sin ningún tipo de seguridad. Admiro su trabajo.

    @edgardoramayo8788@edgardoramayo87882 жыл бұрын

    • Jajajaja. Cuál es la necesidad de hacerlo a patas? No tiene sentido. Solo son costumbres ridículas. De culturas atrasadas.

      @pela24100@pela24100 Жыл бұрын

  • I often complain about my country, but after seeing this it opens my eyes to how some - maybe much of the world - is still working. I feel sorry that these men have to work in these conditions, but respect their effort and skill. I can't believe that there is no money to create a modern factory, but perhaps that would mean too few jobs? At any rate, I doubt these crankshafts are very high quality. It seems like a process from a century or more ago.

    @supermash1@supermash12 жыл бұрын

    • Totaly agree with you, these work for a living not to make high quality cranckshafts unfortunatly they have no choice but to work on these conditions

      @dieudonnembalambalaa@dieudonnembalambalaa2 жыл бұрын

    • @@dieudonnembalambalaa I think they do have a choice, but they just don’t know better than that their place looks like this. I think even in Pakistan it would be possible to get a neat concrete floor and some I beams and roof sheeting for a proper factory building. But i guess they’re just ok with how it looks like currently.

      @Engineer9736@Engineer9736 Жыл бұрын

    • @@Engineer9736 Have you ever been in a Foundry ? Hot metal on a concrete floor causes an explosion spewing molten metal all over you. A sand floor is ok.

      @henryblack3974@henryblack3974 Жыл бұрын

  • Nothing but respect for these guys back breaking work dangerous environment no PPE probably long hrs too 🙏

    @larsson7709@larsson77092 жыл бұрын

  • Salute for this hardworking men.

    @jackspicer455@jackspicer4552 жыл бұрын

  • Aapke Vedios Laajaawab Hote Hai👍

    @lyricalstatus0.721@lyricalstatus0.7212 жыл бұрын

  • When they cast iron in these places, how do they check the quality of the iron? Carbon content? Silisium content? Sulphur content? Is it left to the arbitrary when putting old machine parts, pots and pans and other metal junk in the oven? I wouldn't want a critical part on my car to be made of brittle cast iron with 4% carbon content when a high tensile strength steel is needed.

    @klydolph2@klydolph22 жыл бұрын

    • Make perfect alloy every time! Life time balanced crank shaft guaranteed! Come again!

      @taza99@taza992 жыл бұрын

  • Almost impossible to imagine working without boots.

    @johndenver5785@johndenver57852 жыл бұрын

  • Адская работёнка. Респект этим парням.

    @Ostap_I_Kisa@Ostap_I_Kisa2 жыл бұрын

  • Mini Steel. courageous work.🤪 Greetings from Brazil 🇧🇷🇧🇷🇧🇷🇧🇷

    @lestedabahia6121@lestedabahia61212 жыл бұрын

  • The requirements for the metal of the crankshaft are very high. Almost every Chinese crankshaft manufactured in a Chinese factory does not pass quality control in Europe. The hardening of the necks of the clone shaft is also neglected.

    @giggling_boatswain@giggling_boatswain2 жыл бұрын

    • Целиком и полностью с вами согласен, очень печально видеть как на поток поставлено производство этих контрафактных колен валов. Это ужасно видеть, так как раз такое масштабное производство, значит такой же и сбыт. Искренне жаль людей пострадавших от покупки данной продукции.

      @user-ec1wz1sj8j@user-ec1wz1sj8j2 жыл бұрын

    • Chinese can build any quality crankshaft but everything has price you want cheap you’ll get cheap

      @guulwade989@guulwade989 Жыл бұрын

    • @@guulwade989 that is true. I worked for years for a well known German manufacturing company that had factories all over the world. Our factory in China has the exact same quality control standards as the factories in the EU or the USA. You have to be careful to specify whether you are talking about a company that makes things in China versus a Chinese company. A Chinese company can be very poor quality.

      @tjsogmc@tjsogmc Жыл бұрын

    • @@user-ec1wz1sj8j не переживай. Эти валы идут для внутреннего потребления.

      @user-wk3xw5ft7y@user-wk3xw5ft7y Жыл бұрын

  • Красавчики, мое увожение

    @user-iw7yg4vx7i@user-iw7yg4vx7i2 жыл бұрын

  • great process video 멋진과정!!!!

    @YourProcess@YourProcess2 жыл бұрын

  • Hermoso trabajo en metalurgia un fuerte abrazo desde Perú

    @richardremigio9066@richardremigio90662 жыл бұрын

  • Muy buen canal , se puede apreciar el buen trabajo que realizan , que sigan los éxitos.

    @victorquispecastro6128@victorquispecastro61282 жыл бұрын

    • 0

      @salmansaleh1743@salmansaleh17432 жыл бұрын

    • Sobre todo por las medidas de seguridad jajajaj

      @ThePedrinio@ThePedrinio2 жыл бұрын

  • Самое главное что хозяин этой "мастерской " заберёт 80% прибыли а остатки отдаст этим беднягам

    @Dm-vb5jd@Dm-vb5jd2 жыл бұрын

    • @Grey Fox не паникуй раньше времени

      @Vladimir-lz8fi@Vladimir-lz8fi2 жыл бұрын

    • В России все 98%заберет, а потом ещё окажется что ты не так сделал что-то и ещё должен окажешься🤣🤣🤣 Не знаете не говорите. У вас все так устроено, лишь бы работягу на*бать. А в Пакестане возможно не так как в России.

      @sasha_creativity@sasha_creativity2 жыл бұрын

    • В России тоже самое. Работал на родственника близкого. 70+ процентов себе забирал. Я и послал. Теперь платит по 50 процентов левым чувакам. Так как ни кто работать за 20-30 процентов не будет. Менталитет в нищих странах такой. Хотят быстро разбогатеть за счёт других.

      @creeomaster2337@creeomaster2337 Жыл бұрын

  • The next time someone gives me a hard time for working in sandals (usually closed toe Keen's) I'll direct them to this video! Wowza!

    @michaelstormoen@michaelstormoen2 жыл бұрын

  • Fascinating process. Great video 👍

    @knobsdialsandbuttons@knobsdialsandbuttons9 ай бұрын

  • Сколько продолжительность жизни работника такого производства?

    @tilerderdan7641@tilerderdan76412 жыл бұрын

    • 100 коленвалов)

      @user-pd9rg7ng8i@user-pd9rg7ng8i Жыл бұрын

  • Eu sou mecânico, nunca montaria um virabrequim desse. garantia 10 metros ou 10 minutos funcionando

    @carloshenriquevieirabarros634@carloshenriquevieirabarros6342 жыл бұрын

    • Kkkkkkkkkkkkk. Mas eu acho que essas peças ainda devem passar por outros processos; como usinagem, tratamento químico, temperamento e balanceamento para ficar nos padrões corretos.

      @eduardohenriquelima@eduardohenriquelima2 жыл бұрын

    • Esos son los repuestos que venden en latinoamericana.... Después de mecanizados y pulidos quedan muy bien.... Y el vendedor del almacén de repuestos dice:"le tengo uno genérico ( - koreano-).... De muy buena calidad.... Todos lo llevan y no he tenido problemas..." 😂😂😂😂😂😂

      @carlosepava@carlosepava2 жыл бұрын

  • No se desperdicia nada del metal y se reconstruye nueva piezas digno de admirar exelente

    @fabriciocedeno7184@fabriciocedeno7184 Жыл бұрын

  • Amazing work

    @ToyotaLEngine@ToyotaLEngine2 жыл бұрын

  • Nobel work using what you have. Bare feet in a foundry? No consideration to metallurgy? Forged cranks are far superior. But again, these men do hard and honest work. The cranks would last moments in my ‘63 AFX Chevy II.

    @killerkane1957@killerkane19572 жыл бұрын

    • These cranks will work as well as forged cranks in small engines with much lower price tags. A forged crank may be worth more than you entire chevy.

      @JW-bx4su@JW-bx4su2 жыл бұрын

    • @@JW-bx4su tf you smoking?

      @rickylafleur5823@rickylafleur5823 Жыл бұрын

  • Que trabalho precário....!!!!!

    @evangelistagabrielgeraldo1706@evangelistagabrielgeraldo17062 жыл бұрын

    • А главное бесполезная. Коленвалы не отливают целиком за ещё и из такого говна.

      @user-ec2cd7sc4c@user-ec2cd7sc4c2 жыл бұрын

  • Semma great experience great job

    @raj1987ist@raj1987ist Жыл бұрын

  • The sandal game at this “foundry” is insane lol

    @MrDannyd9@MrDannyd92 жыл бұрын

  • Народ трудолюбивый и умный, только технологии производства очень древние

    @user-et7dp6qu6fKaiMai@user-et7dp6qu6fKaiMai2 жыл бұрын

    • Я чет не догоняю ОнИ там из земли формы делают ? че эт за хрень у них черная ?

      @MAPKCuCT@MAPKCuCT2 жыл бұрын

    • @@MAPKCuCT типа глины что-то

      @user-et7dp6qu6fKaiMai@user-et7dp6qu6fKaiMai2 жыл бұрын

    • @@user-et7dp6qu6fKaiMai Да глина вроде коричневая обычно х3

      @MAPKCuCT@MAPKCuCT2 жыл бұрын

    • Че-то не сходится, умный народ - технологии древние? Так если умный, чего же они древние?

      @ReaveransFE@ReaveransFE2 жыл бұрын

    • @@ReaveransFE чего не понятного. Ограничения к современным технологиям . Санкции анау мынау короче (туда сюда)

      @user-et7dp6qu6fKaiMai@user-et7dp6qu6fKaiMai2 жыл бұрын

  • Молодцы 👍💥

    @Miss-xr8oh@Miss-xr8oh2 жыл бұрын

  • I’m proud of you 👍

    @vichetdragoncars3186@vichetdragoncars31862 жыл бұрын

  • قمة الابداع 👍

    @user-bd6rf1sk5o@user-bd6rf1sk5o2 жыл бұрын

  • You must always start with good raw METRICAL!! 😂👌

    @CarmineRC@CarmineRC Жыл бұрын

  • Omg that’s a really physical work with barefoot and barehanded no safety no protection….its incredible to see how hard they’re working every day

    @stevenyellow7638@stevenyellow76382 жыл бұрын

    • I bet the guy making the mold has the smoothest feet in Pakistan. Probably a foot model as a night job.

      @martinswiney2192@martinswiney219210 ай бұрын

    • I bet the guy making the mold has the smoothest feet in Pakistan. Probably a foot model as a night job.

      @martinswiney2192@martinswiney219210 ай бұрын

  • Is that motor oil you add to your sand...?

    @terencesimpson100@terencesimpson1008 ай бұрын

  • Ну все таки уважуха за труд 👍

    @abilkasimzhaksilikov140@abilkasimzhaksilikov1402 жыл бұрын

  • Dêem uma só peça nas mãos desses homens e eles farão um milhão de peças iguais.

    @isaquechaves7114@isaquechaves71142 жыл бұрын

  • Они бы ещё для самолётов лапостя лили, качества металла наверное огонь, сверх сталь 🤣🤣🤣

    @user-hp8mh5lg1l@user-hp8mh5lg1l2 жыл бұрын

    • Дура, это чугун!

      @user-ib2hl9ci7k@user-ib2hl9ci7k2 жыл бұрын

    • Оптимусов праймов и прочих суперменов собирать

      @vasapupkin4118@vasapupkin41182 жыл бұрын

  • Good work

    @HanifEFIMechanical@HanifEFIMechanical2 жыл бұрын

  • افكار.بسيطة..لى...الصناعة..التقيلة..ولهدا صنعو.قنبلتهم..النووية...💪

    @tihatiha9984@tihatiha99842 жыл бұрын

  • Просто нет слов,я охреневаю!!🙉🙉

    @user-eo9lv1uq6w@user-eo9lv1uq6w2 жыл бұрын

    • F dln 07 p10

      @mohdzuraimibinyaacob9317@mohdzuraimibinyaacob93172 жыл бұрын

  • Son muy buenos trabajadores lastimas las condiciones laborales y deplorables como realizan su oficio y peligroso.

    @johncarloscastrosilva428@johncarloscastrosilva4282 жыл бұрын

    • De qué parte del mundo serian esta gente??he visto que hacen de todo pero siempre la misma forma precaria de trabajar

      @eduardoguillen2347@eduardoguillen23472 жыл бұрын

    • @@sergiugabrielpopovici5664 si , para salvar el dia es como decimos en mi región

      @eduardoguillen2347@eduardoguillen23472 жыл бұрын

  • RESPECT !

    @glencoughlan2209@glencoughlan2209 Жыл бұрын

  • very good knowledge, hopefully useful

    @talumalemofficial9564@talumalemofficial95642 жыл бұрын

  • За такое качество с ними нужно рассчитываться монетами из говна

    @user-rp8jx4qx9k@user-rp8jx4qx9k2 жыл бұрын

    • Это не для экспорта . Да и уважай труд людей

      @saiansydyk5796@saiansydyk57962 жыл бұрын

    • такие монеты они и получают

      @IncognitoUnknown-fc2tu@IncognitoUnknown-fc2tu2 жыл бұрын

  • The sandal brigade. Surely working in that environment, that hazardous surrounding, that polluted shop. No safety measures at all, not a beginning of health awareness. Barefoot even. Someone, sometimes must stand still and rethink what he’s doing in that company of … what are they? Made slave to the circumstances? Nota begin of respect for themselves. There is no romance in this type of work, there is ‘how lovely, that’s how we did it in bygone days’. Those days are past us and voorgood reason. The only thing we see is poverty. Not only poverty as in lack of wealth but also povertyas in lack of common sense. These people don’t need to be cheered, they should be pitied. And damn those who get rich over these peoples backs!

    @nicobogaard2315@nicobogaard23152 жыл бұрын

    • I thought this was part of making things Great Again. Getting rid of all the stupid safety and namby pamby stuff and workin’ like grandpa did.

      @v35james78@v35james782 жыл бұрын

    • @@v35james78 Sounds like you’ve never had an incident yet. People who are cursing safety all the time are just too dumb to understand the point of it.

      @Engineer9736@Engineer9736 Жыл бұрын

  • Good job gaes

    @arrasydservice7536@arrasydservice75362 жыл бұрын

  • ماشاء الله تبارك الله ربي يحفظكم ويرعكم ان شاء الله

    @aliahm5450@aliahm54502 жыл бұрын

  • ماشاء الله 🌹

    @arezarez5607@arezarez56072 жыл бұрын

  • Коленвал из консервных банк 😅

    @user-zq4ct8di6w@user-zq4ct8di6w2 жыл бұрын

  • GM,s cast iron crank was put in press to turn half the cast crank throws twisted 90 degrees while still red, they would break in half,but hat was forty years ago

    @tomashton1781@tomashton17812 жыл бұрын

  • Linda profissão parabéns

    @MarceloPereira-ei8hl@MarceloPereira-ei8hl Жыл бұрын

  • That's damned impressive work and results. I'm not a metallurgist but if good iron is used I'm sure those cast cranks will last. Certainly as good as an 80's chev.

    @kelsycunningham8452@kelsycunningham8452 Жыл бұрын

  • Больше всего интересно, смотрел на изготовленную форму, как в ней верхние точки отливаются металом?

    @user-gh3bl4kz8v@user-gh3bl4kz8v2 жыл бұрын

    • Мне тоже это интересно. Литников нет.

      @user-ec2cd7sc4c@user-ec2cd7sc4c2 жыл бұрын

    • Форма то пористая, газ выходит чугун заходит

      @pahatregub@pahatregub2 жыл бұрын

  • Estas personas. Son las mejores máquinas

    @evaristoguarneros143@evaristoguarneros1432 жыл бұрын

  • Is a casted crankshaft without forged will strong enough?

    @StrsAmbrg@StrsAmbrg2 жыл бұрын

  • cit: "lower cost, inexpensive tooling"....yes, if you pay a little fraction of a right salary, you don't pay the workers when they have injuries, ill, rest....yes, this is a lower cost way to produce stuff....

    @TheAngorTube@TheAngorTube2 жыл бұрын

  • You are heroes, and your work is difficult and engineering, but you must use industrial safety equipment to prevent the dangers of work. I would like to ask about the name of the powder that you add to the molten iron during molding?

    @user-te5er3mm2u@user-te5er3mm2u2 жыл бұрын

    • يا عبد الرحمان. هؤلاء العمال و الاطفال لا يهتمون بوقاية انفسهم امام هذه الاعمال الخطيرة و المحرقة. لا يعرفون الخوف. أتعرف لماذا هم على هذا الحال من الطمأنينة و الشجاعة و الارتياح ؟؟؟ إنها المهدئات. مهدئات الدماغ و الجسد. مخدر الخرشاش و الحشيش. و الكيف. و الماريخوانا. إقرأ كذلك تعليقي الثاني هنا. و هو مكتوب بالانجليزية.

      @abdellahzaidi1257@abdellahzaidi12572 жыл бұрын

    • Le kanabi. Le kif🌿🌿🌿. Le hachich. Le kharchach. ça donne le plaisir de travailler de cette façon. Sans aucune protection. C’est pourquoi ces pakistan 🇵🇰🇵🇰🇵🇰 travaillent de cette façons. Avec les habilles de nuit et par terre. Comme des esclaves.

      @abdellahzaidi1257@abdellahzaidi12572 жыл бұрын

    • Kanabi. The kif 🌿🌿🌿. The hashish. The karchach. it gives pleasure to work this way. Without any protection. That's why these pakistan 🇵🇰🇵🇰🇵🇰 work this way. With night clothes and on the floor. Like slaves.

      @abdellahzaidi1257@abdellahzaidi12572 жыл бұрын

  • Mu full respect goes to these hard-working people who really contributes to the society.

    @MrNatsuka@MrNatsuka2 жыл бұрын

  • Enjoy very much works of pakistani people, congratulations

    @777ludovico@777ludovico2 жыл бұрын

  • сувенирные коленвалы))))))))

    @6tamaka9@6tamaka92 жыл бұрын

  • Sweet, do not think the parts are constant red line able though!

    @soisaidtogod4248@soisaidtogod4248 Жыл бұрын

  • super amazing skill..

    @adikisela409@adikisela4092 жыл бұрын

  • Amazing video. This is what I can "man made". not machines, no computers, not even shoes in their feet. Very nice process. Not OSHA at all.

    @Nyck461@Nyck461 Жыл бұрын

    • Thanks for watching ☺️

      @AmazingThingsOfficial@AmazingThingsOfficial Жыл бұрын

  • It is amazing the accomplishments they make with what they have, well done

    @cliffwork8547@cliffwork85472 жыл бұрын

    • Lmao thats exactly how the shit is made just on a smaller scale. What a compliment are you referring to exactly?

      @jameswest2385@jameswest23852 жыл бұрын

  • Ага. Только вот нормальные люди коленвалы куют, а не льют из железоподобной смеси металлолома. Хотя да, это же паки...

    @dfgggfg@dfgggfg2 жыл бұрын

    • Ну вот и узнал почему колены новые ломаются 😆наши торговцы дешевые запчасти везут из таких вот манафактур. Охренеть .

      @user-xv8fk7yj6k@user-xv8fk7yj6k2 жыл бұрын

    • Для массового производства их отливают)

      @pahatregub@pahatregub2 жыл бұрын

    • @@pahatregub отливка коленвала проковывается. Для упрочнения. Плюс нормальный металл и правильные режимы термообработки.

      @dfgggfg@dfgggfg2 жыл бұрын

  • Beautiful

    @murthymgb@murthymgb2 жыл бұрын

  • Woow..amazing teknical enginering,

    @Workshopdike@Workshopdike2 жыл бұрын

  • Fico impressionado com tamanha precisão de como produzem belíssimos trabalhos profissionais. A parte mais triste, é vê-los trabalhar sem o mínimo de equipamento de proteção individual, aspirando esses gases tóxicos.

    @erdnaxela_2023@erdnaxela_20232 жыл бұрын

    • Precisão? Kkkkkk, um virabrequim de verdade feito de material sólido tem precisão até mais de um centésimo de milímetro, isso aí poder ser chamado de precisão e profissionalismo? Kkkkkkkk, nem de longe.

      @dannymoneywell@dannymoneywell Жыл бұрын

    • @@dannymoneywell Provavelmente as peças ainda vão ser refinadas e usinadas para atingir a precisão necessária. Isso ainda tá muito bruto, mas é normal em qualquer forja. E concordo com o nosso amigo, as condições de trabalho são deploráveis.

      @eddiemill6600@eddiemill6600 Жыл бұрын

  • Parabéns 👏👏👏 ótimo trabalho!!!🇧🇷🇧🇷🇧🇷

    @luisaparecido5885@luisaparecido58852 жыл бұрын

  • Very good job

    @harinderpalbrar5185@harinderpalbrar51852 жыл бұрын

  • Do you smelt iron or aluminum?

    @youcefgheddari8400@youcefgheddari84002 жыл бұрын

  • Que perfeito...maravilha de trabalho abençoado 👏👏👏❤

    @fernandoclaudiano3588@fernandoclaudiano35882 жыл бұрын

    • Vcs se refere ao resultado, certamente. Porque as condições de trabalho são deploráveis.

      @eddiemill6600@eddiemill6600 Жыл бұрын

  • Wow those rail chairs they used as weights date from pre partition days lol Always enjoyable to see proper forge work and metalworking done the proper way and I remember my grandfather taking me to see a blacksmith in Kent who used to make and repair parts for his old car back in the 70's, did a google maps to see if the forge was still there and its all modern plastic houses and horrible people :(

    @dodgydruid@dodgydruid2 жыл бұрын

    • Kent has lost almost all of its heritage unfortunately, if you want tradition you should look to Wales.

      @jamescharlesworth775@jamescharlesworth7752 жыл бұрын

  • Amazing and nice videos

    @Info-Tech-@Info-Tech- Жыл бұрын

  • I like those "safety sandals"!

    @donaldb3628@donaldb3628 Жыл бұрын
KZhead