KZhead

90days Machining Process with 100yrs Old Technology - HH Special Compilation #2

Hydraulic Hands
2023 ж. 19 Мау.
4 986 272 Рет қаралды
Жүктеу

Thanks for watching!!
if you enjoy to watch skillful workers & fascinate old school hacks,
Watch these video to enjoy & learn!! how 90s workers worked under circumstances.
With old machining techniques & old tools, It's the mindset that takes advantage of technology to do what makes the most sense.
I promise it is 2023
Thanks for the visit, Please comeback, Enjoy, Learn & Spread positivity.
Ignore Tags:
#machining #lathe #hydraulichands #machinists #metalworking #hydraulic #machine #restoration #repairing #recycling #pakistanitruck #amazingtechnology #top5 #fastestworkers #skills #skilledwrokers #5 #discoveringskills #1 #oldschool #oldtools #tools #smartwork #

Пікірлер

  • I am a Tool & Die Maker but also spent years as both a Tool & Cutter Grinder and a Gear Cutter. it's fascinating to watch! We used German machines nearly 100 years old. Extremely precise. Final sizes were adjusted with a large wheel about 70 cm in diameter. to change depth by 0.001 inch, you would turn the outside of that wheel around 15cm. That's how close you could get sizes! In Canada, some of the things certainly wouldn't pass the Ministry Of Labor but still, there is a lot of talent there! Gears are a very difficult product to produce! Unimaginable to anyone who doesn't see it being done in person or not having done it themselves. I have, so I know. Smart people working there!! When I made cutters, my maximum allowable deviation was 0.0003 inches. However we had machines good enough that it was possible to get to 0.0001 or even less when truly needed. Better the cutter, better surface finish and tooth profile. Which increases the life of the gears.

    @galaxiedance3135@galaxiedance31357 ай бұрын

    • I am a old toolmaker from Australia yes they do have skill but the machines are very old so the finish and tolerances would not be very good at all and the working conditions are so very unsafe.

      @kennethsayce8645@kennethsayce86455 ай бұрын

    • @@kennethsayce8645 When I was building Dies, we'd have Customers walk around the shop, they'd stop to talk to us sometimes. We've built things for them before and they came back for another new job. They seen our machines and the free play. They were amazed at the quality of our dies considering the crap we had to work with. Sometimes on a milling machine, you'd have to work close to the end of travel where the Ways weren't worn out so much. It sure made what should be an easy job, quite difficult... but the boss had a new car every few months (literally) I lost count how many he had. He also had the 3 company trucks go out for detailing every few days. plenty of money for that, nothing for upgraded machines.

      @galaxiedance3135@galaxiedance31355 ай бұрын

    • ¡¡ Me agradan esos procesos industriales , es digno de admirarse la forma rudimentaria y artesanal que emplean en su elaboración , sobre todo que portan equipo de seguridad , muy necesario , vaya para ellos mi reconocimiento por el ímpetu que le imprimen ☺️👏🤛🤜🤝🫂🗣️!!

      @josemanuelsanchezarriaga6435@josemanuelsanchezarriaga64354 ай бұрын

    • ¡¡ No portan equipo de seguridad!!(Perdón)😮

      @josemanuelsanchezarriaga6435@josemanuelsanchezarriaga64354 ай бұрын

    • In sandals. How many hours of operation can they expect out of all that labor? Pakistan can make nukes now. They have a little stand off everyday with India. I recently had a need for a larger air compressor and got one from a body shop that had no motor. India bought patents from I.R. I ordered new valve plates and connecting rods and piston ring from E-Bay Honed out both sides got a like new Baldor motor and it has been running well. India also years ago bought old Vespa patents. Timken bearings come saying Made in India. Modern tools are coming to every land. It has been World Parts for quite some time. I tune in to see the guys who braze a carbide tip to a scrap jack handle and bore a hole. Once in the blood this metal addiction never goes away.

      @martinnorbeck4657@martinnorbeck46572 ай бұрын

  • I am from Ahmedabad. In my town we do have such a big lathe the milling machine the vertical late and we have all the things that I see here that can be made in my town. I see all the workers have great skill with their own manufacturing machine the gear box they have made is humongous. Great work great skill great understanding and I hope you all have great success in your life.

    @pandg48@pandg487 ай бұрын

  • This has to be one of the most impressive things I've seen. A machine shop that works more or less outdoors. Everything looks so dirty and impossible but these guys turn scrap into the most functional and precise work ever. The next time I need to fix something, these are the ones to get the job done. All respect, you deserve all respect!

    @kennethnel306@kennethnel3066 ай бұрын

    • @@Lorin-GabrielLeaua-fm1lw I'm very interested to know why being religious make you knowing how to do stuff more than others....

      @vipeyre38@vipeyre385 ай бұрын

    • i doubt they are very precise.

      @creepinonthebabes@creepinonthebabes4 ай бұрын

    • ​@@vipeyre38Easy!! Buddha, Odin, Batman ®, Mars, Bacchus, Aphrodite, et al telepathically convey their cumulative knowledge to us, the religious, rendering us Kings& Queens of the Mount! (However, I can make this immense body of knowledge available to you heathens as well for just a friendly donation to cover S&H! I'll send you the link.)

      @Omar-kk9fp@Omar-kk9fp24 күн бұрын

  • ABSOLUTELY STUNNING WORK !!! you guys are top notch craftsmen.........keep it up boys.....GREAT STUFF.

    @normanmackenzie8130@normanmackenzie81309 ай бұрын

  • Respekt ihr Männer... ihr habt es drauf !!! Mit alter Technik so etwas präzise zu bauen, da kann man nur sagen... Hochachtung ihr Männer, ihr seid Spezialisten auch ohne ,,Hochtechnologie'' !!! Grüße aus Deutschland... an an das gesamte Team und jeden Einzelnen Mann in der Firma !

    @ruthdiekampferin1805@ruthdiekampferin180510 ай бұрын

    • wohl eher nicht vom fach? zb misst man im maschinenbau nicht mit dem bandmass , nur als beispiel. absolut mittelalter, wie alles in pakistan.

      @TheBauma@TheBaumaАй бұрын

  • Great hard working Machinists from Pakistan. A job well done. You hands and eyes are just as good as CNC machine's computer. God Bless you gentlemen. Thank you for your hard work and effort. We Pakistani people thank you, for your hard work.

    @user-jk9jg7nt9x@user-jk9jg7nt9x6 ай бұрын

    • Okay, but which effing god???? You know that there are between zed and an infinite number of gods, right??? Please! Be specific!!!!

      @Omar-kk9fp@Omar-kk9fp24 күн бұрын

  • Incredible & amazing. An eyeopenining experience watch the video! My respect respect

    @paulleow4238@paulleow42389 ай бұрын

  • This is Masterpiece Engineering process,,salute from malaysia engineer..

    @kesepian_86@kesepian_869 ай бұрын

    • Accolades accepted! _____The Former Dutch East Indies And Your Neighbour And Pal 😂😂😂

      @Omar-kk9fp@Omar-kk9fp24 күн бұрын

  • Hard work and the smiles on many of these guys tells me they enjoy what they are doing. They have a level of pride that far too few people today know or understand. These workers are amazing!

    @frontierhubby4014@frontierhubby40142 ай бұрын

    • I would love to film the progress of a job in a foundry, it has opened eyes to real hard work. Busting up engine blocks to recast rotors and cylinder liners. The chucking of large castings using a bent wire. These are one hundred year old techniques.

      @martinnorbeck4657@martinnorbeck46572 ай бұрын

    • Fu

      @carlamondin1796@carlamondin17962 ай бұрын

  • ماشاءالله تبارك الله عمال مهرة جزاهم الله خير الجزاء

    @user-wx4ny8sm1t@user-wx4ny8sm1t8 ай бұрын

  • A true labor of love you all should be so proud of yourselves with the work you have put here congratulations I’ll tip my hat to you

    @brianomdahl3682@brianomdahl36829 ай бұрын

  • To su pravi majstori. Skladna ekipa . Uštimani znalci. Vrijedni ljudi. Svaka čast i pohvala. Pozdrav iz Zagreba, Hrvatske.

    @user-zd9xx6qy4h@user-zd9xx6qy4h6 ай бұрын

  • Es una maravilla ver a todos estos hombres trabajando de una manera tan natural piezas que requieren de tanta precisión. Felicitaciones a todos y al dueña de la empresa.

    @joaocharly@joaocharly7 ай бұрын

  • I can't believe all this workers are all professional machinist, from measurements & cutting in a lathe are truly precise & putting it together are like factory made but you guys skill's cannot be compared or under estimated by any other who wants to compete your skill's, magnificent job

    @czar89031@czar89031Ай бұрын

  • Wow!... Each Person Knows their Job. That's Why They Can Do This Kind of Work Well... and Not Get Hurt or Damage the Machinery Too. Thanks for Sharing

    @davidwood1923@davidwood19239 ай бұрын

  • The masters of metal. Congratulations, amazing job. Greetings from Argentina!

    @migpep@migpep4 ай бұрын

  • Fireball left the chat, amazing video, I was enthralled by it, I served my time as an apprentice tool maker making press tools, single stage and progression, and I was always in awe of our big old radial drills, forget the CNC and EDM machines it was those big old mysterious grumbling slow moving dinosaurs that got me, the sound of an 80mm bit cutting into steel and the snap of the thick chip flying off, sounds only a few will hear, anyway, super video, subscribed

    @gbarnewall1@gbarnewall19 ай бұрын

  • I really enjoyed this video as it brought back great memories when i work in a similar heavy shop, those days were happy days 1960's , 57 years ago! god bless america

    @joselsierra3474@joselsierra34749 ай бұрын

    • I dont miss thsoe days, had to work 9 hours machining engines and couldnt rest a minute even, i was always on my feet and working.... boss was stupid , and even during the luch he was harrasing me,, he gave me a broken chair to seat on the table saying he hadnt another chair.. had to bring food from my hosue he couldnt even pay me the food for sometimes or goiung to anext door restaurant.., somtims ahd to eat cold food. becasue had a broken microwave... i just did earn the minimum salary.. GOT another job...

      @user-wv1pj6wh4h@user-wv1pj6wh4hАй бұрын

    • Grandson???? Is that you????

      @Omar-kk9fp@Omar-kk9fp24 күн бұрын

    • Thanks for your blessings, I guess.... ________ Odin -The God Of All Gods And Owner Of All Patents, Trademarks, Service Marks, And Copyrighted Miscellaneous Stuff.... And I WILL pursue you civilly and criminally for any and all infringements..

      @Omar-kk9fp@Omar-kk9fp24 күн бұрын

  • Awesome skill level without any formal technical education. They learn it on the job, mostly from father to son or older brothers to their young. This here is Pakistan most people dont know about. Great video.

    @aliafaaqkhan2176@aliafaaqkhan21769 ай бұрын

    • сомневаюсь что там нет образования,,, по видео индусы молодцы

      @user-il5nr6yl6g@user-il5nr6yl6g9 ай бұрын

    • @@user-il5nr6yl6g they are Pakistanis, not Indians.

      @aliafaaqkhan2176@aliafaaqkhan21769 ай бұрын

    • You do not know that. I think at least some of them have higher education and understand in depth all processes involved.

      @tomeks666@tomeks6667 ай бұрын

  • I’ve been machining for 47 years I started out on old-school equipment like this. I have nothing but admiration and respect for these men very talented. I know what it takes to make these parts on old-school equipment.

    @boblove6487@boblove64879 ай бұрын

    • Glad to hear That

      @hydraulichands@hydraulichands9 ай бұрын

    • Including not any form off safety, and therefore no respect for human live

      @patrickkleeven638@patrickkleeven6389 ай бұрын

    • I thought they were pretty safe for the most part compared to alot of crappy worksite videos I've seen. Should have masks though, among other things. Edit: oh my welding with no hood lol..

      @NaterNorris@NaterNorris9 ай бұрын

    • *'%😮😅

      @hlathein6430@hlathein64309 ай бұрын

    • Is this machinery really 100 years old?

      @philipgates8693@philipgates86939 ай бұрын

  • Magnifico trabalho,parabens a equipe.

    @edvaldo3821@edvaldo38217 ай бұрын

  • As a retired mechanical enginer I should say they were amazing. Pure hand made, pure skill, pure mastership and pure passion. You can see the proud in the masters eyes. Congratulations, and best regards from Turkiye.

    @Duzceli_muhendis@Duzceli_muhendis9 ай бұрын

    • Couldn't agree more!

      @hydraulichands@hydraulichands9 ай бұрын

    • I agree with everything you have wrote, I have used most of these Machines, in my time, and in their countries, Thank you for an honest Comment

      @frankwells8204@frankwells82048 ай бұрын

  • awesome video, nothing but admiration for the craftsman.

    @scottmorse1798@scottmorse1798Ай бұрын

  • Excellent video, I really enjoy watching these old machines at work by what looks like very skilled machinist's. Great job gentleman.

    @patsatterfield8412@patsatterfield841210 ай бұрын

    • I'd like to see were and how the workers live.

      @alexhayden2303@alexhayden23039 ай бұрын

  • I started my engineering apprenticeship using machines of this era, no CNC machines in those days! Well remember cutting keyways in shafts with an old shaping machine similar to the one in this video. Great skill shown by all. Been retired now more than 20 years.

    @tismeagen684@tismeagen6849 ай бұрын

    • ... Before ⚡ Electricity Then Eh?...

      @TS-1267@TS-12679 ай бұрын

    • называется строгальный вертикальный называется долбежный

      @user-il5nr6yl6g@user-il5nr6yl6g9 ай бұрын

    • @@TS-1267 Yes we had electricity but many of the machines were actually belt driven from a huge central motor and a long high mounted shaft full of pulleys (not the shaper). My first job as an apprentice was to check the belts each morning and treat them with resin to prevent slipping. Happy days with little money!

      @tismeagen684@tismeagen6849 ай бұрын

    • ​@TS-1267 I still set up and run a 100" Newark gear and sprocket gasher. The gigantic 3ø motor is retrofitted on the jackshaft.

      @dumbo800@dumbo8008 ай бұрын

    • Esses homens sao barrio

      @maria-ql4ms@maria-ql4ms8 ай бұрын

  • Mantap..ok kami salut dengan orang Hindia..hebat2 trimakasih.

    @gumesGapuraning@gumesGapuraning3 ай бұрын

  • Great workmanship gentelmen. " Old age and treachery, will always outdo youthfulness and skill"

    @busman2000@busman20003 ай бұрын

  • i am so impressed what these real mechanics can do with such old eqiupment. such people we need in our country !

    @MarineEnfield09@MarineEnfield099 ай бұрын

    • Glad you liked it

      @hydraulichands@hydraulichands9 ай бұрын

    • Look around. Assuming you're in the US, we use the same equipment in shops across the country, every day.

      @dumbo800@dumbo8008 ай бұрын

  • This could be a best yet video from the channel. 💯We've seen steps in making some of these components in recent recent videos but most of this is new new footage showing several jobs going together and being finished. And I really enjoyed the pictures of the team at the end. 🙂

    @johncmitchell4941@johncmitchell494110 ай бұрын

    • I tried & m Glad you liked it...

      @hydraulichands@hydraulichands10 ай бұрын

    • Конечно это здорово. Это как понял коробка редуктора на нефте - качалку. Но вх цехе грязновато у нас за порядком и чистоты спрашивают строго а так просто труженики и им почёт и уважение.

      @user-bk9fd6cc7d@user-bk9fd6cc7d9 ай бұрын

    • May God bless you all!👉👍😊

      @januarioqueiroz3122@januarioqueiroz31229 ай бұрын

    • @@hydraulichandsاپنا نمبر شعر کرو

      @zulfiqarali5534@zulfiqarali55348 ай бұрын

    • @@user-bk9fd6cc7d This omnipresent mess and dirt also irritates me. An employee rides on suspended material, gears straight from machine tools land on a floor full of sand, stones and remnants of processed material. Lots of foundry sand and precision bearings, and before final assembly, the employee only wipes them with a dirty rag!

      @franzrogalewski@franzrogalewski6 ай бұрын

  • Incleible el trabajo que hacen , maquinas que ya no existen en USA, arduo labor merecen 100% de aprobación, ingeniosos ingenieros la mayoría son veteranos.

    @JoseAngel-iv5eu@JoseAngel-iv5eu9 ай бұрын

  • Bonjour du Canada Bravo for all the worker on this vidéo ,for her hard work and good skill .

    @mauriceouellette7514@mauriceouellette75143 ай бұрын

  • Steve this is your best project. It’s the one I stumbled on when I first started watching your channel I don’t know why it’s so special 👍👍

    @frankbartolo5223@frankbartolo52239 ай бұрын

  • Essa equipe é incrível, isso que é ser torneiro mecânico!. Essa equipe é incrível, isso que é ser torneiro mecânico!.

    @user-kq9fz7kv4h@user-kq9fz7kv4h8 ай бұрын

  • I love watching these guys work..

    @microwave-vh2uc@microwave-vh2uc9 ай бұрын

    • Glad you liked it ❤️

      @hydraulichands@hydraulichands9 ай бұрын

  • This is what real craftsmen are!!!!!! These men are second to no one !!!!! Excellent workmanship !!!!!!!

    @donchristianson3153@donchristianson31539 ай бұрын

    • Cheers!!

      @hydraulichands@hydraulichands9 ай бұрын

  • Great job guys, and great video! Your composite of the workmen at the end gave your production a personal touch. Thank you!

    @summersoldier3311@summersoldier33119 ай бұрын

    • i liked that too.

      @jonusjonus9271@jonusjonus92718 ай бұрын

  • Hard-working men… Respect!!!😎

    @trainnerd3029@trainnerd30294 ай бұрын

  • Millennial oriental culture, humble,happy great people and proud worker of their culture and work, the west has a lot to learn from you. Long life to all of you.

    @rogelioperez-delgado7082@rogelioperez-delgado70829 ай бұрын

  • It's always so amazing, you look at the western world, see a modern factory building. Then you look at these guys, basically making everything in a shed/out in the open. And yet they still make amazing stuff. Best example that you can achieve everything when you're dedicated enough

    @adrasx6999@adrasx69999 ай бұрын

    • Glad to hear That!!! Thanks

      @hydraulichands@hydraulichands9 ай бұрын

    • You still need the industrial mills

      @4dchessplayer516@4dchessplayer5169 ай бұрын

    • All the equipment they are using was bought from the west, usually at a knock down price, due to Western production being uncompetitive. Western production is uncompetitive due to unions asking for large wages, health and safety laws and environmental standards.

      @spacemanclips@spacemanclips9 ай бұрын

    • There are glorified polebarns across the country that do the same work under their roofs.

      @dumbo800@dumbo8008 ай бұрын

    • This is why some countries are superpowers and some are not

      @patrashdigger@patrashdigger6 ай бұрын

  • These men have technical minds they are to be commended

    @normansinclair4437@normansinclair44379 ай бұрын

  • FANTASTIC WORK, this is something that is past down for years.

    @delongbear@delongbear4 ай бұрын

  • All those workers should be very proud of their skill, labour and craftmanship.

    @veronicapedemonte2934@veronicapedemonte29346 ай бұрын

  • Every machinist should start their profession like these guys. This is how you learn with practical hands on experience.

    @henryt9254@henryt92549 ай бұрын

  • I've been a convetional machinist in shipyards and with an oil company,I know what it takes to do this type of work.Well done great work.

    @stephenaquilina6628@stephenaquilina66289 ай бұрын

  • I hope these workers get a share of the KZhead revenue that this video produces. They certainly deserve it!

    @stuartatkins5425@stuartatkins54258 ай бұрын

  • This process has been nothing but fascinating. Thank you to the compiler! This is marvellous.

    @markallred1953@markallred19532 ай бұрын

    • You're very welcome!

      @hydraulichands@hydraulichands2 ай бұрын

  • Great job guys. The way things went together was perfect. So much knowledge and skills right there.

    @anorak1@anorak19 ай бұрын

    • 💪 🦾

      @hydraulichands@hydraulichands9 ай бұрын

  • I find these videos to be satisfyingly simple, mesmerizingly complex, and eternally intriguing!! Thank you for publishing them. You are a master of your art! Can’t wait to see what you come up with next!

    @mikerice1618@mikerice16188 ай бұрын

    • Glad you enjoy it!

      @hydraulichands@hydraulichands8 ай бұрын

  • Fascinating precision workmanship 😳😳🏆

    @jordiegundersen1465@jordiegundersen14654 ай бұрын

  • These guys are truly amazing ! They can take apart any new truck , reinforce it and make it better , then put it back together bolt by bolt !!

    @lordbyron3603@lordbyron36035 ай бұрын

  • Respect !!!!

    @jeanlucbourg1462@jeanlucbourg14629 ай бұрын

  • Чудо люди ,чудо страна!!! Дай Господи им здоровья и процветания!!!! Спасибо большое автору за позавательное видео!!!!❤❤❤❤❤❤❤

    @user-nr5xe6ue7q@user-nr5xe6ue7q2 ай бұрын

    • Thanx and love from Pakistan

      @Sole-proprietor@Sole-proprietorАй бұрын

  • What an absolute joy that was to watch. I am envious of those machines, taking such deep cuts on such massive pieces of steel and laughing it off. You've got an amazing setup and evidently you've got the skill to use it properly. Thanks for sharing this, it's superb, well done.

    @pmcKANE@pmcKANE9 ай бұрын

    • On everything

      @Child0fStarSon0fSun@Child0fStarSon0fSun9 ай бұрын

  • Proper old school love it excellent expertise 👍👍

    @matthewdickson7838@matthewdickson78389 ай бұрын

  • Да , впечатляет . Здорово , молодцы !

    @user-eb3tr9qr3n@user-eb3tr9qr3n4 ай бұрын

  • I served my apprenticeship as a toolmaker in a gear cutting company and one of the jobs I did was to grind the final shape on to the cutting gear being used in this video to cut the gears. Amazing video bye the way .

    @philiprodney2164@philiprodney21649 ай бұрын

    • You worked with gear cutting tools and never picked up that those are called hobs?

      @dumbo800@dumbo8008 ай бұрын

  • Mis respetos a los maestros , hacen una perfecta combinación hombres , máquinas i fierros . Saludos desde Sicuani PERÚ 🇵🇪

    @guzmansantosaronibarrrios7159@guzmansantosaronibarrrios715910 ай бұрын

  • Very good skilled work by these hard working persons and a good team work .nice to watch

    @srinivasansanthanam749@srinivasansanthanam7498 ай бұрын

  • são verdadeiros mestres ! PARABÉNS A TODOS

    @arausmagnus8588@arausmagnus85882 ай бұрын

  • Dear gentlemen I would like to say for everybody these your job are outstanding , not about mechanic research or facility but the great quality human capacity and the labors team ! Congratulations!!! 🇧🇷👏🏻👏🏻

    @ulyssessoares7903@ulyssessoares79038 ай бұрын

  • ASSISTIR UM VÍDEO DESSE E VER ESSES CARAS FAZEREM TUDO ISSO SEM NENHUMA TECNOLOGIA AVANÇADA , É UM ORGULHO . VOCÊ NÃO VER CORTADORES A LASER , VOCÊ NÃO VER MEDIÇÕES COM MECANISMOS DE PONTA . TUDO É FEITO NO GIZ , NA TRENA DE MÃO E NO PAQUÍMETRO . AMIGOS , VOCÊS ESTAM DE PARABÉNS !

    @erenildovieirafreitasvieir5166@erenildovieirafreitasvieir51669 ай бұрын

    • Laboran muy contentos

      @josedelmirofranciscohermoz1398@josedelmirofranciscohermoz13989 ай бұрын

    • Los ADMIRO hacen trabajos peligrosos sin seguridad personal .

      @josedelmirofranciscohermoz1398@josedelmirofranciscohermoz13989 ай бұрын

    • KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK SEM SEGURANÇA DE TRABALHO

      @Larranxinha@Larranxinha9 ай бұрын

    • Even a slide rule was not in use 1960’s high tech seeing 60 years later in work Spent shale hour to view all

      @ericchang-ek2ee@ericchang-ek2ee4 ай бұрын

  • Great job with the video. Amazing skills they have in the Pakistani industry apparently.

    @lovehatecomments@lovehatecomments3 ай бұрын

  • AMAZING !! great respect !!

    @frankrammeloo7360@frankrammeloo73609 ай бұрын

  • 24:25 Прям представляю этот крик на весь цех: "Пацаны, го шестерню на шпонку насаживать" xD

    @Tokitux@Tokitux9 ай бұрын

  • Parabéns prá todos os que trabalharão nessa máquina vídeo top

    @aroldooliveira5106@aroldooliveira51066 ай бұрын

  • It's great to see how they care about their safety at work

    @marcelinosilva4633@marcelinosilva4633Ай бұрын

  • Everything is fine and everything is valuable except human life and human safety. May almighty allah protect the highly skilled workers and keep them all in his hifz o amanah. Allahhumma aameen ya rub al alameen.

    @mohamedmohiyuddin4004@mohamedmohiyuddin40049 ай бұрын

  • Yes, I must agree w/many of the other comments. I have great admiration for you gentlemen. I hope you guys are getting paid well for your outstanding and incredible work. You guys should be receiving $50 an hour at least. I hope your employer takes good care of your crew. Good help is hard to find. I know these trades take yrs & yrs to be learned. Especially the old school machines your using. I love those old dinosaurs. lol 😆 Okay fellas, you all take care! And stay safe! Many many wonderful blessings to you and your families.✨🙏🏼✝️🙏🏼✨ ✌️😎

    @damagedjustice7133@damagedjustice71339 ай бұрын

    • Considering the lack of safety equipment I'd be surprised if they even get $ 5 an hour. Think it's more like $ 0.50 an hour.

      @BlacksmithTWD@BlacksmithTWD9 ай бұрын

    • @@BlacksmithTWD yeah you're probably right. That's still not right. Safe or not. It's obvious, we can see they know what they're doing. Now I don't recommend riding the chain hoist. lol 😆 I'm sure that's not OSHA approved. 🤦🏼‍♂️🙄

      @damagedjustice7133@damagedjustice71339 ай бұрын

    • Kinda marginal. It would cost so little or nothing for them to upgrade from measuring tapes and chalk marks and open-toed sandals and no welding goggles or safety glasses or old steel cutters. They could cheaply or for free double their speed and precision and safety.

      @georgegonzalez2476@georgegonzalez24768 ай бұрын

    • $400 a month is maximum for old and experienced , starting is around 200$ a month max

      @Hani13ful@Hani13ful8 ай бұрын

    • @@Hani13ful So assuming about 40 hours a week, that makes about 180 hours a month. Then starting wage is a little over $1 an hour, and experienced about double that. Though probably they make more hours a week, so my first guess wasn't that far off. closer to half a dollar an hour than to 5 dollar an hour.

      @BlacksmithTWD@BlacksmithTWD8 ай бұрын

  • Мои поздравления-мы на пороге следующего столетия!!!

    @user-ei4rb6sd7t@user-ei4rb6sd7t9 ай бұрын

    • 😅😊

      @vgenm2457@vgenm24579 ай бұрын

  • Very beautiful work love to see more Your guys are doing great work

    @speedybuggy1677@speedybuggy16772 ай бұрын

  • ماشاء الله ، شيء عظيم أن نرى شباب مسلمين يصنعون محركات بهذا الحجم

    @Salim-nfad@Salim-nfad7 ай бұрын

  • BEASTIE BOYS ! My back hurts like hell after I watch these dudes ! Old school at it's best !

    @kennyc388@kennyc3885 ай бұрын

  • The size of some of the old metal working machines is impressive. It is definitely old school using many man-hours of labor and days of machine time. Compare it to modern day giant CNC machines that hog out the metal for helical gears in minutes compared to hours using just one operator. The contrast is stunning.

    @MrJohnBos@MrJohnBos9 ай бұрын

    • absolutely

      @hydraulichands@hydraulichands9 ай бұрын

    • Most short-run plants are still using hobbers and shapers built from the 1940's to the 1970's. The CNCs today are nice, but most places refuse to buy new when the 50-80yo workhorses are still running and making parts. The conventional hobs are expensive enough, the high-speed tooling is exorbitantly expensive, and usually reserved for high-volume and well-tuned processes.

      @dumbo800@dumbo8008 ай бұрын

  • I'm very impressed by your workmanship. I couldn't do it. Great Job

    @talegunner4414@talegunner44149 ай бұрын

    • Cheers!

      @hydraulichands@hydraulichands9 ай бұрын

  • Wow, the Indian civilization has progressed so much!! Thx ur vt.

    @user-mx2qu9gm6h@user-mx2qu9gm6h6 ай бұрын

    • Not indians these are Pakistanis warriors in Pakistan not in india

      @jahangirqaisar1199@jahangirqaisar11994 ай бұрын

  • Machine wizzards, amazing workmanship and seamless hands abound.

    @brucejones5879@brucejones58794 ай бұрын

  • I have been in the machining trades most of my life. This work somehow puts your mind at ease. Also, the bigger the machine the easier the job. But you have to be someone who make the fewest mistakes, PERIOD !! The mistakes I made per year you could count on your one hand and I had fingers leftover. The metal per job was in the tonages. Hope that makes sense. Good day and peace too. vf

    @victoryfirst2878@victoryfirst287810 ай бұрын

    • Absolute sense, Very well described.

      @hydraulichands@hydraulichands10 ай бұрын

    • When their 100,000 dollar gear blank suddenly turns into a boat anchor, people tend to get a little testy.

      @cojones8518@cojones851810 ай бұрын

    • @@cojones8518 What you said is right on fella. Just add an extra zero on your dollar number. Most jobs were is that range but there were a lot of simple and cheap stuff too. Like squaring die shoes from die machines. Peace and out, vf

      @victoryfirst2878@victoryfirst287810 ай бұрын

    • @@cojones8518 Indeed it'$ hard to throw that piece on the roof , it's why I avoid the BIG $TUFF , we need not worry about that in Canada anymore , no one has this capacity anymore , everyone builds Mickey M.O.U.$.E automated machinery here these days

      @jafo766@jafo7669 ай бұрын

    • defnitely don't want to be making mistakes when safety is clearly not of-concern (not sure I saw a single person with eye protection!)

      @peterlavelle3261@peterlavelle32619 ай бұрын

  • Perfeito Vitor! Em todos os sentidos. Já pensou em uma carenagem.. Essa equipe é incrível, isso que é ser torneiro mecânico!.

    @user-kq9fz7kv4h@user-kq9fz7kv4h8 ай бұрын

    • Ja ja ja ja ja mecánico

      @javiervazquez153@javiervazquez1538 ай бұрын

  • No tools at all BUT such great skills! Your willpower makes it happen. Greetings from Brazil!

    @yversenyelrezzifeu2401@yversenyelrezzifeu24018 ай бұрын

  • Could you imagine a UK factory inspectors face if he walked into this place !!!!! Great video, just goes to prove real craftsmen still exist.

    @trevormorgan6611@trevormorgan66119 ай бұрын

    • They don’t care not in England

      @chipperkeithmgb@chipperkeithmgb9 ай бұрын

    • Btw. I had a chance to visit a machine building factory in the UK in 1985, it was in much worse condition than the one in the video.

      @manojmanga7922@manojmanga79228 ай бұрын

    • But a UK inspector will not walk into this place. As such, that is a pointless exercise to think about.

      @unisonicz1@unisonicz17 ай бұрын

    • ​@@chipperkeithmgb😅8😅😅😅😅😅😅😅😊乔安为i起iii起开气哦健康8温控器爱我ii恰起ii我i惊奇i酷iiwawaIQ（

      @user-sn7ij3jh5h@user-sn7ij3jh5h7 ай бұрын

    • We don't follow UK inspectors because this .manufacturing is more best than UK inspector wants to inspect 😂

      @WaseemakhtarRana@WaseemakhtarRana6 ай бұрын

  • Wow, these guys are performing an art with their skills turning a shapeless piece of steel into a beautiful gear that weighs as much as a car. These guys know what they are doing for sure. This may be old technology but they show they have mastered it.

    @christophergreen2736@christophergreen27369 ай бұрын

    • Q

      @amirusaifi8004@amirusaifi80049 ай бұрын

    • ❤

      @amirusaifi8004@amirusaifi80049 ай бұрын

  • Fantastic old technology is very useful and strong 💪

    @edwardmema9965@edwardmema99659 ай бұрын

  • This is remarkable. Thank you for sharing!

    @jonwills9160@jonwills91608 ай бұрын

    • My pleasure! Glad you enjoyed it.

      @hydraulichands@hydraulichands8 ай бұрын

  • Thanks, great video & workers. The craftsmen that made these machine tools75+ years ago would be very proud to see that they are still productive & pretty accurate after all these years. They would be sad that their machines, their babies, were not well maintained & respected for the parts they can still produce, seeming to be used & used until their last drop of productivity is finally used up! JMO

    @alro2434@alro24347 ай бұрын

  • Great Hard & Skillful Work, please be Merciful and Kind on Bearings while Hammer Fitting please avoid also improve Heat Treatment Facility so that alike such Manufacturing Work Shops. Thanks for Video.

    @adnanshuja4075@adnanshuja407510 ай бұрын

    • Indeed they go from HIGHLY $KILLED machinist's to millwright/wrong mode with hammer.

      @jafo766@jafo7669 ай бұрын

  • Terrific. Really like the photos of all the guys, shows how much these men enjoy their work and workin together!

    @peterparsons7141@peterparsons71419 ай бұрын

    • Glad you made it till the photos displayed at End

      @hydraulichands@hydraulichands9 ай бұрын

  • Perfeito Vitor! Em todos os sentidos. Já pensou em uma carenagem.

    @josecarlosaquino6721@josecarlosaquino67218 ай бұрын

  • These skills will be dearly missed, nowadays the younger generations are helpless whitout an automated machine. Nothing but respect for these guys.

    @pst3615@pst36159 ай бұрын

    • Glad to hear That

      @hydraulichands@hydraulichands9 ай бұрын

    • The good thing is that we can always re-learn those skills if needed. After all, if you know about metallurgy, machining speeds etc from working with automated machinery (those things need to be programmed too! Do it wrong and you'll snap your tool or ruin your finish) you can replicate what the machine does, but manually. Besides that, we've got a great teaching tool: KZhead.

      @mfbfreak@mfbfreak9 ай бұрын

    • Ah yes, the oder Generation blaming the youth, while creating the problems they bemoan. Who would want invest in education anyways.

      @DrunkenDemon@DrunkenDemon9 ай бұрын

    • It's different skills. Similar work to this in the West in now at vastly higher tolerances and requires a different skill set. Notice the lack of IT in the video.

      @spacemanclips@spacemanclips9 ай бұрын

    • at my work we are running tons of vintage machines like that and the average age of the people running them us under 40. there are still people that can run manual machines.

      @retro_88yota@retro_88yota9 ай бұрын

  • great video! what did you build? a gearbox ? what was it used for? really cool!

    @jerkwagon@jerkwagon9 ай бұрын

  • Absolutely BRILLIANT

    @Pinhoser@Pinhoser7 ай бұрын

  • Essa equipe é incrível, isso que é ser torneiro mecânico!

    @Eletronvix@Eletronvix10 ай бұрын

    • Sim

      @tentandoumcover@tentandoumcover8 ай бұрын

  • Excellent job, your people do great work.

    @willwade1101@willwade110110 ай бұрын

    • Thank you very much!

      @hydraulichands@hydraulichands10 ай бұрын

    • Indeed they do , the machine tools look like old junk , but nothing is made as well today if at all.

      @jafo766@jafo7669 ай бұрын

    • @@jafo766 When I started as a machinist in the navy I started on WWII equipment, solid cast iron. As I went on with my career in the navy the machines got lighter and I noticed more vibration out of some of them. Now with CNC I no longer have a place except for my backyard shop left to work because when it came to training on CNC the navy kept training the young who then got out and passed on us old timers who stayed with the service.

      @willwade1101@willwade11019 ай бұрын

    • @@willwade1101 Machine $hop class 1980 they were $till training us on $haper's LOL $een 2 in my career , both in the corner with crap piled on them. I watched Kingsbury Machine Tools of Keene N.H Canada plant go from seasoned castings to welded up frames ? deflection of cutting heads was tremendous , $o was GM's $crap count.

      @jafo766@jafo7669 ай бұрын

  • I cant imagine what they would be capable of building with modern equipment and a pair if Red Wings. ❤

    @user-tl9cr9vm3x@user-tl9cr9vm3x9 ай бұрын

  • son unos maestros de la metalúrgica pero mas del trabajo duro. Mil millones de felicitaciones!!

    @blasjara7238@blasjara72387 ай бұрын

  • Dios bendiga a estos excelentes mecánicos e ingenieros, que pese a trabajo carente de proteccion fisica como del ambiente ellos demuestran su gran calidad... espero que su salario y sus derechos sean de la misma calidad como es su trabajo. Saludos

    @salvadorguillenmarin6376@salvadorguillenmarin63766 ай бұрын

  • What an honor it would be to work with these men.

    @billietyree2214@billietyree22149 ай бұрын

  • Truly talented workers. Well done, gentlemen.

    @Jetseb89@Jetseb899 ай бұрын

  • These are real men. I've worked at fab shops just like this. It could have been warmer in the winter though. Loved every minute.

    @tedtolliver5294@tedtolliver52943 ай бұрын

  • Hello brother ! Wishing you all a happy and peaceful new year

    @dailyxetai3s@dailyxetai3s10 ай бұрын

    • Same to you!

      @hydraulichands@hydraulichands10 ай бұрын

  • Amazing production men, I bet each one of you could do the others job. I would have liked to know what these massive gear boxes were going to be used with.

    @rickvaiBBB@rickvaiBBB9 ай бұрын

    • Me three.

      @brianwood7480@brianwood74809 ай бұрын

    • Looks like some kind of rolling mill 45:00

      @robturner3065@robturner30658 ай бұрын
KZhead