KZhead
Тәжірибелік нұсқаулар және стиль

Awesome Restoration of Rusted Grinder

Rebuilt & Restored
2022 ж. 16 Жел.
854 862 Рет қаралды
Жүктеу

Welcome to my restoration channel! If you like restoration videos or restoration asmr videos you found the right spot! In this video I restore a Craftsman(Sears, Roebuck and CO. USA) Bench grinder that I picked at an auction for around $60 USD. This is a 1/2 H.P. Ball Bearing Capacitor Ginder.
Thanks for watching, I appreciate the view!
THE RESTORATION PROCESS
I tore the bench grinder apart and sandblasted the painted parts. We fixed the wiring and had the capacitor bench tested at our local electric motor shop. I replaced the bearings. I used a tumbler to clean up a lot of the small hardware. I wanted a more stationary base for the bench grinder so we built a new one that fastens directly to the floor. Overall the restoration turned out great and I am happy to have this bench grinder in my restoration shop. It should come in handy!
If you like what I do here, be sure to subscribe, like and leave a comment. Thanks so much for the support. I appreciate your view.
Follow me on Facebook
facebook.com/profile.php?...
Follow me on Instagram
/ rebuiltandrestored
Check out this Snap-On Ratchet Restoration…Mirror Finish: • Mirror Finish. Rusty S...
Check out this 1940s Dump Truck Restoration: • Turning a $40 Truck in...
Check out this old Pipe Vise Restoration: • Restoration of a Ruste...
Check out this Rusted, Stuck Vise Restoration: • Very Rusted & Stuck Vi...
Check out this Vintage Toy Restoration: • Awesome RESTORATION | ...
Check out this Old Tonka Truck Restoration: • 1970s Tonka Concrete M...
Have a blessed day!
Kev
Products used in video:
Craftsman Allen Wench Set. amzn.to/3ldpfCB
Snap Ring Pliers. amzn.to/3lgjNyX
Iwin Channel Locks. amzn.to/3Lpt3vq
Camera and filming gear:
Main Camera. amzn.to/428GF3Y
Video Camera. amzn.to/3JD7J41
Main len. samzn.to/3JDIL4F
50mm Lensamzn.to/3mUZZBt
Disclaimer. All links above are affiliate links. I make a small commission if links are used.------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#vintage restoration

Пікірлер

  • When things are built to a high quality standard, they are worth restoring and rebuilding. You will never see a better made grinder than this again, and now it’s restored it will last another lifetime. Outstanding!

    @harmlesscreationsofthegree1248@harmlesscreationsofthegree12489 ай бұрын

    • Thank you very much! I appreciate that

      @RebuiltRestored@RebuiltRestored9 ай бұрын

  • This was 32 minutes of free therapy for me, thank you 🙏🏻

    @MrFireman164@MrFireman1647 ай бұрын

    • Awesome! Glad you enjoyed! Thank you for watching!

      @RebuiltRestored@RebuiltRestored7 ай бұрын

  • This is my new favorite restoration channel, forget Netflix of Amazon, a beer chips and this video, no talk all show and tell, the way I like it. Cant wait for a vintage bicycle restore, like a Raleigh or something or a vintage table fan.

    @Titanykus@Titanykus8 ай бұрын

    • Thanks much! Glad you enjoy it! I do have an old fan that needs redone at some point. Thanks for the comment and have a great day!

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • I've probably watched a hundred different restorerers on YT and you're the first one I've seen lay down a good weld. Thank you

    @joeyb3102@joeyb31023 ай бұрын

    • Thanks. My brother is the welder! I’ll tell him!

      @RebuiltRestored@RebuiltRestored2 ай бұрын

  • This press has worked like a charm for my projects kzhead.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

    @mexicanpower544@mexicanpower5449 ай бұрын

    • It is very stable!!

      @RebuiltRestored@RebuiltRestored9 ай бұрын

  • Great job, good for another 50 years. As a boomer, it warms my heart watching a Craftsman tool restored to it's former glory.

    @ultrapureblood1311@ultrapureblood1311 Жыл бұрын

    • Thanks much! Glad you enjoyed!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • This looks like it’s from 70s maybe early 80s. Definitely looks like a model I remember seeing in the garage that my dad had. He use to brag craftsman for the lifetime warranty replacement. Guess we finally got the answer as to what lifetime they meant. Regardless of what decade this grinder was made in, it was made back when they made things to last. Even as a kid the 80s was a hell of a time to be alive.

      @wakcedout@wakcedout8 ай бұрын

  • Great work as always. Love that you use restored tools to uh...restore tools. Ha ha

    @petechampagne4893@petechampagne48938 ай бұрын

    • Thanks you! 👍

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • Another amazing Job !! waiting on the little truck , enjoyed it thank you

    @gqunder@gqunder8 ай бұрын

    • Thank you very much! Glad you enjoyed!

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • It always makes me happy to see an old or antique being saved. well done, very nice work.

    @byOldHand@byOldHand Жыл бұрын

    • Thanks much! I appreciate it. I plan to keep this one in my restoration shop! Merry Christmas!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • @@RebuiltRestored /

      @giovannidalcanto155@giovannidalcanto155 Жыл бұрын

  • Really appreciate there being no music - this is a really cool restoration!

    @davidsage9966@davidsage9966 Жыл бұрын

    • Thanks much! I appreciate it!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Possibly the best balanced grinder ever made. When new it would spin for 3 minutes after being shut off. Mine bought in 1972 are both still running fine.

    @barnycanuck6234@barnycanuck6234 Жыл бұрын

    • Awesome! Thanks for the comment!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • I was hoping to see some flying tools.. So many tools, so little time... Very nice restoration.. color choices were perfect... Until next time, take care my friend...

    @garyjones2582@garyjones2582 Жыл бұрын

    • Lol thanks much! Have a great day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • I remember those old plugs from way back. Never thought I'd see one again. I've not thought about them in so many years. It brought back pleasant memories of my great-grandmother's house.

    @Cobra-ky9bt@Cobra-ky9bt11 ай бұрын

    • Awesome! Glad to bring back some good memories! Thanks for watching!

      @RebuiltRestored@RebuiltRestored11 ай бұрын

  • I love how methodical you are in restoring things. Great work.

    @jfleser88@jfleser88 Жыл бұрын

    • Thanks much!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • I like your close-up work with the camera.

    @keithstegall1961@keithstegall1961 Жыл бұрын

    • Thank you!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • great job...i only have one little thing to add...unless you want to blast the paint on the wall behind it..some square tubing and some container to catch the debris from grinding would be a last finnishing touch :)

    @TheDriver454@TheDriver454 Жыл бұрын

    • Thanks for the advice! I thought about adding some dust collection at some point and yes that would keep the wall Much cleaner! Thanks for the comment!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • *_The original is one of my favourite restorations. You guys do top work. Seriously impressive effort and results._*

    @RestorationVideo@RestorationVideo Жыл бұрын

    • Thanks much! Happy New Year! 👍👍👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • That metallic rustoleum color was nice!

    @IratePuffin@IratePuffin7 ай бұрын

    • Thank you. It’s kind of on the idea of the original

      @RebuiltRestored@RebuiltRestored7 ай бұрын

  • It's to bad they don't make them like that anymore, very nice job sir.

    @scottkailey1@scottkailey18 ай бұрын

    • Thank you very much! 👍

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • Awesome rebuilt!

    @relaxation_therapy@relaxation_therapy9 ай бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored9 ай бұрын

  • Love the old square body craftsman grinders. Yours was made by Packard Electric.

    @cavisco@cavisco Жыл бұрын

    • Ok thanks for the info! I appreciate it!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • The already lit torch in your chem cabinet was a JUMP SCARE for me!😱🫣🤔😂

    @adriananderson486@adriananderson4867 ай бұрын

    • Lol I didn’t mean to scare ya! 😂

      @RebuiltRestored@RebuiltRestored7 ай бұрын

    • Can't believe I had to scroll down to 11 comments before I got to someone talking about a lit torch in the cupboard

      @snappyrepairs6482@snappyrepairs6482Ай бұрын

  • Awesome how you bring old back to life, love the recycling ben!

    @paulpaulos7386@paulpaulos738610 ай бұрын

  • really first rate restoration made me a subscriber

    @jeffr0@jeffr0 Жыл бұрын

    • I appreciate that! A very Happy New Year to you!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • What a pleasure to watch. To see this tired old machine but still with life in it bought back to its former glory. Well done Paul uk 🇬🇧

    @paulquinn5260@paulquinn5260 Жыл бұрын

    • Thanks Paul! I appreciate it! Have a great New Year! Blessings!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • You did a fantastic job. Good the lamp shade wasn't damaged. The cord plug is top quality. Always important to have solid safe electrical connections. A Craftsman restored a Craftsman tool.

    @wileycoyotesr8623@wileycoyotesr8623 Жыл бұрын

    • Thanks! And yes the lamp shade was in great shape! Thanks for watching and Happy New Year to you!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • This is my favorite tool in your shop. I had seen it in other videos and did not know it was a restoration.

    @ENWILSON@ENWILSON9 ай бұрын

    • Thanks! This is a nice unit to have for sure. Thanks for the comment!

      @RebuiltRestored@RebuiltRestored9 ай бұрын

    • Sure turned out nice!! Great job.

      @Beenthere5409@Beenthere54099 ай бұрын

  • I like the sign on the wall.

    @matthiasmartin1975@matthiasmartin1975 Жыл бұрын

    • Thanks much! I appreciate it!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Beautiful restoration. I restored my block grinder too, but did not go nearly as in depth as you did. I really like how you stuck with the original color scheme.

    @herbholmberg4474@herbholmberg44748 ай бұрын

    • Thank you! And I actually get mixed feedback on the color but I like it. Thanks for watching 👍

      @RebuiltRestored@RebuiltRestored8 ай бұрын

    • @RebuiltRestored You will never please everyone with color choice, but you just can't beat original if you ask me. Keeping original color makes something look new, drastic changes like red, blue, green, etc. screams repaint!

      @herbholmberg4474@herbholmberg44748 ай бұрын

    • I could not agree more!

      @herbholmberg4474@herbholmberg44747 ай бұрын

  • Excellent work. I enjoy the fact they you took time to do the best paint matches that you could and used proper rivets for the data plate. So many times I see people use pop-rivets for this.

    @duginvirginia5737@duginvirginia5737 Жыл бұрын

    • Thanks much! I appreciate it! Thanks for watching!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Hang some small, cheep household HVAC air filters on the wall behind the vents. They will keep dust and debris from flying everywhere and keep things a bit cleaner on the wall as time goes by, and they can be replaced easily as they dirty up... They could be a fire hazard if your spraying sparks, so consider that, but if it just dust they could keep things much cleaner around the bench grinder. Nice restoration

    @JZ-tg1cm@JZ-tg1cm Жыл бұрын

    • Awesome! Thanks for the advice and for watching! Have a great day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • That grinder came out really nice. I wasn’t sure if the finish was in the paint or in the metal before you stripped it. But the hammered finish paint made it look good. I have my grandfathers old Black and Decker bench grinder. Still works fantastic. When I got it, I cleaned it up and replaced the power cord. The original one was all dried out and very brittle. Plus it wasn’t grounded. The new cord was the same size wire with a ground and I drilled and tapped a boss on the bottom of the grinder to ground it. Seeing how yours came out, I might do an overhaul on it soon. Anyway, great video!

    @stevenw1005@stevenw10059 ай бұрын

    • Very cool! It’s always cool when you can keep a family tool and keep using it. Paint it up nice and don’t ever sell it! Thanks for sharing and for the view! Have a great day! 👍

      @RebuiltRestored@RebuiltRestored9 ай бұрын

    • @@RebuiltRestored Thank you for your comments. I really have no intention of getting rid of it. Much like the Craftsman grinder you gave a new life to, my old Black and Decker is built the same way. Back then, these companies made good quality products. Unfortunately, today the newer stuff isn’t built as well.

      @stevenw1005@stevenw10059 ай бұрын

  • Incredible job Mr. R&R!! Lot’s of hard work went into that!

    @darrendurkee2@darrendurkee2 Жыл бұрын

    • Thanks 👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • That is a nice grinder and stand. Love the old craftsman line of shop tools. All cast iron solid. I really hope you do more of this craftsman line of shop tools.

    @charleslanier1992@charleslanier1992 Жыл бұрын

    • Thank you very much! The next video isn’t a craftsman but who knows in the future! 👍👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Better than new!!!😊😊😊😊❤❤❤❤❤❤❤

    @ransomdaniels8395@ransomdaniels83955 ай бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored5 ай бұрын

  • I am trying to get my own You tub channel started.Two projects I want to do is one, I have an old school die grinder with the flexlible shaft in the original wood box from the 40s more than likely . I bought it off of Ebay from and estate of a jeweler . I am going to do a youtube video on that and I also have an American Made solvent tank I am going to restore and also to that on on KZhead its probably over 50 years old .I already have the pump and found and American made parts cleaning brush for it too. I love old school tools they will never make things like this again and love to see them restored the pride and craftsmanship is dead and gone and will never be back . Great job I love it

    @madmanmechanic8847@madmanmechanic8847 Жыл бұрын

    • Awesome Mad Man Mechanics! And you should totally start a channel! The die grinder sounds neat. Good luck on the channel and your projects! Keep me posted! Thanks for the comment and for the view! Have a blessed day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • @@RebuiltRestored Wow I havent had anybody give me that much support in so long I forgot what is was like! Been down in the dumps with the cold icy weather and I havent been able to get any of my projects worked on and it is driving me nuts. I have been trying to get my Chevelle restored and that is shut down too. I am doing a frame off. Its a factory Heavy Chevy they only made for two years its a matching number factory four speed car. I want to do the rest on You tube if everything goes good. You really made my day I cannot thank you enough you really cheered me up and have given me incentive to launch my youtube. I am very nervous I am still learning editing but all the youtubers tell me the same thing. Hey we were nervous too and we just did that first post and that is all you need to do. My first video is going to be about a Jet Ski it never had the oil changed on it and the oil filter was frozen on there and I could not get it off even with a pair of huge channel locks. No room I had to take the inside of the ski apart and half the part of the engine apart to get to the oil filter it kicked my ass. This is going to be my first post. Your reply really cheered me up and I really needed it . Had three people in the past week treat me really bad so I was really down in the dumps. I need to move out of here so bad the people are horrible here and I am working on that too. Thank you thank you for cheering me up you made my day dude I really needed this ! 😉😉😉😉😉😉😉😉😉

      @madmanmechanic8847@madmanmechanic8847 Жыл бұрын

  • So good. What a masterpiece.

    @lordieshepherd@lordieshepherd8 ай бұрын

    • Thank you very much and thanks for watching!

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • Very good job. Love to see old tools restored and put back into service. I wish I had a metal lathe and milling machine, but too late now. I'm over 70, no time to begin learning. My dad took a machine shop course in high school and at one time could operate a metal lathe, but I do woodworking and cannot begin to weld or do anything with metal. Oh well, maybe next incarnation?

    @zekecorder8226@zekecorder8226 Жыл бұрын

    • I would like a lathe as well however, I don’t know to operate one. And it’s not to late to learn! Thanks for the comment! Have a great day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • Jaja buen comentario saludos desde Uruguay 🇺🇾 nunca es tarde vamos arriba abrazo

      @marcelovalenzuela8081@marcelovalenzuela8081 Жыл бұрын

    • NEVER too late! If you have space then do it.

      @AndreasEUR@AndreasEUR Жыл бұрын

    • It's never too late buddy. You're 70 but commenting on KZhead videos so you're very capable. Find something in your area like a machine shop or college campus or somewhere where you can donate some time and also learn the skill that you want to learn. Go do it. Ask the worst they can do is say no. Then go ask again. You can do it.

      @josephnavarro3620@josephnavarro36209 ай бұрын

  • Suggestion? I personally would have replaced the capacitor. I like to restore old tools and actually USE them. If that beauty gets put back to work, there's a good chance the capacitor will not last. Those old wet capacitors just go bad over time. A modern replacement would be fairly cheap. Just my opinion. That and $5 might get you a cup of coffee.

    @windmillacres679@windmillacres679 Жыл бұрын

    • Thanks for your suggestion! I had this bench tested and it was good. I can replace it if I ever need to…. I do enjoy coffee ☕️ Thanks for watching! 👍👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Yet another great video. You are spoiling us. Oh but the the red vixen of a trolly jack has stolen my soul. You are the chosen one. You are the Captain of restoration. May your tools get bigger and brighter. May you get many many sponsors

    @banditman142536@banditman1425368 ай бұрын

    • Thank you very much! Glad you are enjoying! However, I am still learning! :) have a great day! 👍

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • New Craftsman Tools to rebuild an old Craftsman Grinder. Nice

    @bixby9797@bixby9797 Жыл бұрын

    • 👍 thanks!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Watching items that were "Master Manufactured" being taken care of makes my heart "pitter-patter"!

    @tkskagen@tkskagen Жыл бұрын

    • Lol good deal! Thanks for watching!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • Watch out that might mean a pacemaker is in your future! 😂

      @LynxStarAuto@LynxStarAuto8 ай бұрын

  • Gracias! Me recuerdo de mi juventud, trabajando con mi abuelo. Magnifica restoracion!

    @JustAnotherGoddess52@JustAnotherGoddess52Ай бұрын

    • Muchas gracias!

      @RebuiltRestored@RebuiltRestoredАй бұрын

  • Nice restoration of the old grinder & glad you kept the original factory plate that they riveted on the front of it & the other grinder wheels that was on it is still good,you can keep them back for spares & that's nice that you put a wire wheel on the other side of the grinder

    @justinmcclanahan6036@justinmcclanahan603610 ай бұрын

    • Thanks much! And thanks so much for watching! Have a great day!

      @RebuiltRestored@RebuiltRestored9 ай бұрын

    • @@RebuiltRestored You're welcome

      @justinmcclanahan6036@justinmcclanahan60369 ай бұрын

  • Craftsman still my favorite tool brand. Grew up going to sears with my dad to buy tools regularly. Great job restoring that bench grinder. 👍🏼

    @jonascazares153@jonascazares1536 ай бұрын

    • I remember going to Sears as well! 👍 thanks for watching! Have a great day!

      @RebuiltRestored@RebuiltRestored6 ай бұрын

    • Yeah, Sears was my favorite store at the mall for most of my life.

      @unkjason@unkjason6 ай бұрын

    • @@unkjasonsuch a good store. As a kid, I was all over that place.

      @RebuiltRestored@RebuiltRestored6 ай бұрын

  • A remarkable rebuild and restoration. I too restore tools rather than buy new and can appreciate the effort you put in. With brain and hand, a job masterfully done! Thanks for sharing!

    @jackaldesign1196@jackaldesign11968 ай бұрын

    • Thank you very much! Keep up the good work and have a great day!

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • That torch in the cabinet awesome.

    @charlesreynolds2798@charlesreynolds2798 Жыл бұрын

    • Letting it idle

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • You are so talented. Men like you amaze me.

    @nannymac47@nannymac473 ай бұрын

  • Well done, good approach to business😊😊

    @user-by4mc6wq3s@user-by4mc6wq3s6 ай бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored6 ай бұрын

  • I actually have this exact same grinder, was my grandfather's. Made many knives and swords with it, this one will definitely serve you well in your shop.

    @bryanphillips6088@bryanphillips6088 Жыл бұрын

    • That is awesome! Thanks for the comment!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • İş makineleri ve endüstriyel dekoratif ürünler restorasyonu izlemek keyifli

    @ingilizanahtar644@ingilizanahtar644 Жыл бұрын

    • Thank you!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Nice work. Thanks for sharing.

    @jacksnow1703@jacksnow17038 ай бұрын

    • Thanks for watching!

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • Nothing else to say but perfect. Looks and runs great and now you have a very nice quality wire wheel and grinder setup to use whenever you need it. Thumbs Up!

    @garymucher4082@garymucher4082 Жыл бұрын

    • Thank you very much! Yes it will be nice having this in the shop.

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Nice job. These projects (and videos) take an awful lot of time. Much respect. Most my videos are substantially smaller projects, and they still take a while!

    @shanesgettinghandy@shanesgettinghandy Жыл бұрын

    • Thanks @shanesgettinghandy! I appreciate it! Thanks for the view.

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Better than new, excellent workmanship

    @jjsisco@jjsisco2 ай бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored2 ай бұрын

  • I have the same Craftsman Bench Grinder my father bought in the 60's.

    @michaelbell7465@michaelbell74656 ай бұрын

    • Very cool! These are pretty sweet. Beefy machines. Thanks for watching and have a great week!

      @RebuiltRestored@RebuiltRestored6 ай бұрын

  • I can't believe you found one so complete and for that price, what a find. Someday I hope to be so lucky. Beautifully done.

    @michelecrown2426@michelecrown2426 Жыл бұрын

    • Thanks much! I’m happy with it! Have a great day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • I have the same grinder, not quite so complete, but gave $35.00 for mine. They are out there but you need a local seller, shipping would kill you.

      @mikeking7470@mikeking7470 Жыл бұрын

    • Shipping not too bad. I sold one from PA and shipped it to TX. $40.

      @Beenthere5409@Beenthere5409 Жыл бұрын

    • I have the same grinder without the light

      @steve-ph9yg@steve-ph9yg Жыл бұрын

  • Incredible work. I like the paint scheme a lot too.

    @emiliodonate@emiliodonate Жыл бұрын

    • Thanks! Finally someone likes the paint! 😂😂👍👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • ARTISAN FOR SURE, tanks for sharing...

    @tomdale1313@tomdale1313 Жыл бұрын

    • Thanks so much! Appreciate it!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Thank you for sharing. Once again very nice👍

    @elsdp-4560@elsdp-45609 ай бұрын

    • Thanks for watching! 👍

      @RebuiltRestored@RebuiltRestored9 ай бұрын

  • Very nice! A good bench grinder with wire wheel, polishing wheel, and grinding wheel combination should be a must for any shop.

    @asyouwererestorations8964@asyouwererestorations8964 Жыл бұрын

    • Thank you! And yes, I am happy to add this one to my shop! Have a great day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Good job bud you really got you stuff together i would have gave up on the electrical part. The part i liked the most was when you took a photo of the electrical stuff and you put “for my memory” i found out that that was the funniest part of this video😂

    @caterpillart5662@caterpillart5662 Жыл бұрын

    • 🤣Thank you very much! I appreciate it!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • Same here

      @williamvaughn2938@williamvaughn293810 ай бұрын

  • John 3:16 the only true restoration! Love it.

    @snarf909@snarf90910 ай бұрын

    • True! thanks for the comment!

      @RebuiltRestored@RebuiltRestored10 ай бұрын

  • Nicely done. One suggestion: replace the capacitor next time. Electrolytic capacitors dry out over time and need to be replaced. That old one could fail at any time.

    @HereticalBuilder@HereticalBuilder Жыл бұрын

    • Thanks for the advice!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Very nice work

    @The_Bearded_B@The_Bearded_B6 ай бұрын

    • Thank you!

      @RebuiltRestored@RebuiltRestored6 ай бұрын

  • I had one just like that one - A blast from the past.

    @tobyw9573@tobyw9573 Жыл бұрын

    • Awesome! Thanks for watching!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • need a cool back splash on the wall or grit collection. Nice restore. Makes me want to do mine.

    @bfrerck@bfrerck Жыл бұрын

    • Thanks. Yeah I may put some sort of dust collection on it. Thanks for watching!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • That is the exact grinder dad had in his shop back in the day. Was a smooth running machine. Sold at an auction sale years ago, wish I'd kept it but you can't keep everything. Thank you for restoring this one, good to see one looking just like new again.

    @xlerb2286@xlerb228611 ай бұрын

    • Very cool. Thanks for sharing! I appreciate it. This one was bought at an auction :)

      @RebuiltRestored@RebuiltRestored11 ай бұрын

  • Great job. This brought back some good memories, my dad had the same bench grinder in his welding shop. Thanks for sharing this!

    @myblues6532@myblues6532 Жыл бұрын

    • Very cool! Thanks for the comment!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Brilliant work. Be advised however that it is necessary to have thick paper discs either side of the grinding wheel so the metal washers don't bear directly onto the wheel. Prevents cracks!!

    @MrLukealbanese@MrLukealbanese Жыл бұрын

    • Awesome! Thanks for the tip! 👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Lovely work

    @davidflarrety9655@davidflarrety96558 ай бұрын

    • Thank you!

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • The classic block grinders are bulletproof. I have my grandfather's and use it without worry.

    @gmtech26358@gmtech26358 Жыл бұрын

    • Very cool! Thanks for the comment!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Just like the title says "Awesome Restoration of Rusted Grinder". Great work man!

    @GordiansKnotHere@GordiansKnotHere Жыл бұрын

    • Thanks very much!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Great restoration!! There's a lot of hours in this video. Thanks for sharing

    @dennis82468@dennis82468 Жыл бұрын

    • Thanks! I appreciate it

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • 100 ani va munci după restaurație. Bravo

    @gh.n6340@gh.n6340 Жыл бұрын

    • Thanks very much!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • your restoration was very cool!

    @josecarmona8058@josecarmona8058 Жыл бұрын

    • Thank you very much

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Such a beautiful job, you should be proud. Thanks for sharing.

    @brianwood5220@brianwood5220 Жыл бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Nice restoration, beautiful welding. Bravo!

    @quantumleap359@quantumleap359 Жыл бұрын

    • Thanks much! Thanks for watching!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Awesome job. Thank you for keeping that grinder alive.

    @Diego-mc2go@Diego-mc2go Жыл бұрын

    • Thanks! I appreciate it! 👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Just discovered your channel. Seeing that old Craftsman grinder brought back old memories. I worked at the local Sears when I was in high school and college in the mid to late 1980s. Good video and you have a lot of skill.

    @gisman_2000@gisman_2000 Жыл бұрын

    • Thanks for the kind comment! They don’t make these like the use to. That’s awesome! Seems like Sears are gone! It was a neat store. Thanks for watching and for the comment! Have a great day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Excellent restoration of a good instrument. I hope to see it at work in your next restoration projects.

    @AnDIY_Handmade_Restoration@AnDIY_Handmade_Restoration Жыл бұрын

    • Thanks! You’ll see it again! 👀

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Very nice! I have 4 of those old Craftsman bench grinders, they are great!

    @ifirefight1@ifirefight1 Жыл бұрын

    • Thanks. I am happy to add this to my shop. Have a great day! 👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Nice neat job. Looks as good as new. The only additional thing I might have done would have been to make a couple of sheet metal spark guides to go on the back to aim the hot metal dust from those guard ports downward (Rather than straight at that nice white wall). Some would insist on making a water trap to capture the metal dust too, but personally, I don't do enough bench grinding to warrant that.

    @Reman1975@Reman19759 ай бұрын

    • Thanks much and thanks for the advice! I do need to do something behind soon. The wall isn’t looking as white! 🙄

      @RebuiltRestored@RebuiltRestored9 ай бұрын

    • Or stick a piece of sheet metal to the wall for the sparks / dust to bounce off of, a bit faster to get in place and leaves space for access to clean / maintain the tool.

      @jaquigreenlees@jaquigreenlees9 ай бұрын

  • Beautiful job. I wish I had one of that quality.

    @KevinCall@KevinCall9 ай бұрын

    • Thanks! I found this one at an auction.

      @RebuiltRestored@RebuiltRestored9 ай бұрын

  • Fantastic job. I love to watch videos that don’t have a bunch of unnecessary talking. Good skills too. I’m a new subscriber for sure. Thanks.

    @billboyles7469@billboyles7469 Жыл бұрын

  • Excellent Restoration work. Very precise.

    @amitbhattachariya9357@amitbhattachariya9357 Жыл бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Absolutely a piece of Art. Nicely done, hey by the way, I've built so many square/round tube stands for grinders, Vises, presses. Theirs always a "Ting Sound" from the Tubes being hallow. Take the grinder off, and drill a hole big enough to fill the tube with Sand. It Takes the Ting out and also makes it Heavier, No Walking. Hope this helps, just a little Info.❤

    @V8SKULLS@V8SKULLS9 ай бұрын

    • Thank you! Cool tip! Maybe I’ll have to try this. 👍👍 info is welcome! Thanks

      @RebuiltRestored@RebuiltRestored9 ай бұрын

  • Absolutely a fantastic restore!

    @abominablesnowman1137@abominablesnowman1137 Жыл бұрын

    • Appreciate it!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Wonderful job on this old machine! They sure don't build them like this anymore.

    @AlanG58@AlanG58 Жыл бұрын

    • Thank you very much! Yes, this was built well.

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • 5:06 Me too...me too. Also, if you notice the scanning black bars in your footage at 20:19-20:25 you can get rid of them by adjusting your shutter speed to a divisor of 60 if you're in the US (1/60, 1/120, 1/180, etc) or 50 if you're elsewhere in the world (1/50, 1/100, 1/150, etc). This corresponds to 60 Hz or 50 Hz frequency of the electricity. There's also some cameras that have an anti-flicker setting that automatically adjust for it!

    @CatalystRestorations@CatalystRestorations Жыл бұрын

    • Thanks. I appreciate the advice. I will have to try to adjust that. Thanks so much! Have a blessed day!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • The only things missing are the dust collection plenum, switch isolation washer and rubber switch cover,and the saftey cover for the light bulb . Good restoration job.

    @James-ru4jx@James-ru4jx Жыл бұрын

    • Thanks much! A safety cover for the light is a good idea. 👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • I have the same model Craftsman 1 horsepower bench grinder.

      @James-ru4jx@James-ru4jx Жыл бұрын

  • Yes, young man; I indeed did watch the video you posted of the ratchet restortion. I had watched a few of your videos because I am mostly prone to watch hand tool restoration videos; but it was until today, while watchig the ratchet restration one that I noticed the message at the bottom line of your chanel sign; beautifull one, as well as the job you do with old tools. Warm regards fron Mexico. Zech 10:1

    @rubenbernal9244@rubenbernal924410 ай бұрын

    • Thanks you very much and thanks for watching! God Bless

      @RebuiltRestored@RebuiltRestored10 ай бұрын

  • That was an awesome video! I love those old Craftsman grinders and have cleaned up and replaced bearings on several. Just a suggestion, but I would loosen the bolts that attach the grinder to the stand. Looks like you squeezed the rubber feet down pretty tight. If you loosen the bolts a bit, that would allow the rubber feet to take up some of the vibration on the grinder and make it run smoother. Great video and great work! Thank you for sharing!

    @garageshopminnesota@garageshopminnesota Жыл бұрын

    • Thanks you! Thanks for the advice! Advice is welcome here! I appreciate the view and feed back!

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Very meticulous, fine craftsmanship!

    @larryrizzo736@larryrizzo736 Жыл бұрын

    • Thanks you very much! Happy New Year! 👍👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Quality that mate, love it

    @Charlton2010@Charlton20108 ай бұрын

    • Thank you very much! Glad you enjoyed 👍

      @RebuiltRestored@RebuiltRestored8 ай бұрын

  • To be honest they don’t make that quality any more I wish to have one like in my work shop good job my friend 🙏

    @diegohperez6434@diegohperez64344 ай бұрын

    • True! Thanks for commenting!

      @RebuiltRestored@RebuiltRestored4 ай бұрын

  • Awesome job! Really enjoyed watching your work! ✌Greetings from Italy 😉

    @TapeSan1@TapeSan15 ай бұрын

    • Thank you very much! Greetings to you as well! Have a great week! 👍

      @RebuiltRestored@RebuiltRestored5 ай бұрын

  • Eres un fiera tio

    @franciscojaviercaotejero488@franciscojaviercaotejero488 Жыл бұрын

    • Thanks you! 😂

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Love it! Filling the stand with dry sand creates a better base and deadens the sound!

    @OWFab@OWFab Жыл бұрын

    • Thank you very much! And yes that would have been awesome! I didn’t think about it. Great advice! 👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

    • @@RebuiltRestored you still can. Drill a hole at the top and funnel it in. Cap it off with a plug. You won't regret the result! Plus makes another Video?

      @OWFab@OWFab Жыл бұрын

    • Ok. Maybe I can get to it. And yes I am working on another video 👍👍

      @RebuiltRestored@RebuiltRestored Жыл бұрын

  • Your restoration work and attention to detail are top-notch! The old school receptacle is icing on the cake. The human mind and the human hands are truly awesome machines !

    @markchizmadia2004@markchizmadia20044 ай бұрын

    • Thank you very much!

      @RebuiltRestored@RebuiltRestored4 ай бұрын
KZhead