Candy Cigar Roller Restoration | And Testing
#restoration #candymaking #candyroller
Paypal: paypal.me/NTRBeer
Patreon: / notterriblerestorations
/ ntrprojects
/ ntrprojects
Hello everyone,
Take a look at this Candy Cigar Restoration project. It's a great example of how to restore and revive a vintage story with old tools and techniques.
As you can see, this project required a lot of restoration work. In this video, I'll show you how I repairedand fully refurbished this candy roller. After the restoration, I of course tested the finished product.
Thanks for watching!
If you're interested in restoration or want to learn more about how to restore old tools then this is the video for you!
Hey if you want to support me, you can become my patreon or invite me for a virtual beer via
Paypal: paypal.me/NTRBeer
Patreon: / notterriblerestorations
and follow me on Instagram and Facebook
/ ntrprojects
/ ntrprojects
I'm an amazon affiliate and I benefit when you pruchase the tools I use via the links below:
Here are the links to the tools and equipment I use:
xTool P2 Laser Cutter/ Engraver: ➡️ www.xtool.com/?ref=a33AnTM6OT...
IMPLOTEX 3000 Compressor: ➡️amzn.to/40Xp5iK
Powder Coating Gun: ➡️amzn.to/3XEnXhk
Laser Pecker 2 Engraver https: ➡️amzn.to/3EhzLza
Fein Multimaster MM 700: ➡️amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C: ➡️amzn.to/3I7Ttyh Sandblasting Cabinet
420 Liter: ➡️amzn.to/3S62o89
350 Liter ➡️amzn.to/3IyPj3V
220 Liter ➡️ amzn.to/3IzYMYE
Kamera - Sony AX53: ➡️amzn.to/3Kif4XB
Grabby "McGrabface" Grabson: ➡️amzn.to/3Z506sc
Stay healthy Dr Beer
Music:
Intro:
Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
Result Scene:
Timeless - Lauren Duski from KZhead audio library
00:00 - Intro
00:56 - Chapter 1: Disassembly
04:45 - Chapter 2: The Crank
05:34 - Chapter 3: Metal Works
09:33 - Chapter 4: Powder Coating
10:38 - Chapter 5: Base Plate
13:22 - Chapter 6: Top Bolts
15:01 - Chapter 7: Nickel Plating
15:56 - Chapter 8: The Clamps
16:52 - Chapter 9: More Shiny Stuff
17:25 - Chapter 10: El Bronzo
19:40 - Chapter 11: New Parts
20:34 - Chapter 12: Slides
21:42 - Chapter 13: The Handle
23:27 - Chapter 14: Wood Stabilization
26:35 - Chapter 15: Assembly
30:01 - Chapter 16: Results
31:16 - Chapter 17: Testing
33:07 - Chapter 18: Beer Test
My three year old was very concerned about all the messes you were making with your tools. He wanted to make sure you cleaned it up after you were done. 😂
Tell him it's completely clean again, but I will not become a candy maker for sure. I'm glad he takes care in such details. Great to know he watches my videos
😂😂😂😂
@@fredbrandon1645This is pretty typical trait for Germans
So sweet
Kid is being taught well! Good job dad
Various filming techniques like occasional stop motion and 4x speed really help keep these beautiful restorations engaging to watch. Thank you!
Thanks a lot for the kind feedback
Back then Whenever I watch these types of videos, plus rug cleaning or food compilations, I do x2 speed... didn't know it was because I was developing epilepsy and needed to watch videos at x2 to keep up with the stimulation. Now I do 2x spend cause of the asmr sound
The stop motion was wonderful
It’s like it’s not the same machine. It turned out beautifully!
I was screen sharing this on my tv and my autistic sister wanted me to tell you that you should wear gloves because smth about chemicals and if you get a cut tetanus. She has a hyper focus on chemicals and safety, so she was really worried when she saw no gloves. Keep up the good work she loves watching these its the highlight of her day!
@25:12 On the off chance this hasn’t been mentioned yet, there is stabilizing resin (sometimes called cactus juice) that doesn’t require you to sand a whole bunch of resin off. You put the wood in the resin, use the vacuum, and then remove the wood and bake it. Fantastic job once again!
Great input. Next time I will use cactus juice for sure
It’s sort of like a thin resin that replaces all of the air to stabilize anything that holds a lot of air, like for example a pine cone.
@@ResinEssenceByCheribut an equally important step is to bone dry the wood before putting it into to resin and evacuate it.
@@NTRprojectsLook up Peter Brown. He's a madman when it comes to stabilizing. Or resin. He stabilized BREAD.
Our you know he could use the lathe to just cut his own? i don't get the point of stabilizing an old handle that could easily be replaced
There is no shortage of restoration videos on the internet but I feel like this one really stands out. Your editing is almost better than the restoration itself and how you filmed each piece shows an incredible understanding about what makes restoration satisfying. Amazing work!
Thank you very much for your appreciation
@@NTRprojectsyour well timed humor that wasn't over the top or detracting from the work was perfection.
Clearly, those are candy zeppelins! Great work!
This one makes a lot of sense
@@NTRprojects With the right coloring, they would make decent worms.
@@NTRprojectsThey would also pass for a Taquito.
candy leeches
Torpedoes? Penny whistles? Great job!
This restoration had everything I like- sandblasting, nickel plating, powder coating and new part fabrication. So well edited too. I'm subscribing!😊
Welcome to the channel
That is SO well done. I really love the way you preserved the handle but made it tough enough to be used. Absolutely gorgeous!
Preserve the handle! The first break was a doh! moment but to keep on breaking it more and more was just cringy!
I wasn't expecting you to hand pull the candy! Fantastic job of restoration and frankly a really great try with the candy.
I really appreciate you taking the time to make the closed caption comment. I enjoy getting more detail about what you are doing in the CC. Have a Merry Christmas.
Agreed, very much so!
Gar nicht schlecht! Das Ding ist wunderschön geworden, der Aufwand für das Filmen und Schneiden ist beeindruckend. Und als Sie am Ende allen Ernstes auch noch Zuckermasse aufgekocht haben, das Zeug am Haken geknetet und die Dinger gewurstet haben, war ich definitiv beeindruckt. Das sieht nach mehr als einer Woche Arbeit aus. Respekt!
Very nice, i love how those keys came out. Shining the edge while leaving the pitting patina on the thumb surface was definitely the right call
Wow! That’s a fabulous job. Amazing finish on the paint, nuts and beer. Candy Turds though!
Yeah, I'm thinking "Tiger Poop" would be the best name for the candy.
@@AutomaticSelector I second "Tiger Poop."
i agree with your centiment about them looking like turds but just to give them a more friendly name i say call the tiger pinches as in pince one off :D
@@MrFixiit Sounds OK. Or maybe even something like Tiger Torpedos.
Someone may have covered this already but I believe the machine is for making bubble gum cigars. We used to get them when we were kids.
I just love how you take the most mundane items that are rusted to bits and turn them around completely and give them new life.
great job on the "UNICORN HORN" candy press
Ooooooh this is my new favorite
Это потрясающее мастерство! И уникальная техника, которая может прекрасно работать и в наше время, благодаря золотым рукам мастера! Ваша работа просто завораживает!
This was unbelievable! I'm following you for 2 or 3 years now and the improvement of your work is incredible! Chapeau!
Thank you so much for your support Tina
Another long tail follower here and I can only agree with you. The progression in every area -restoring and video editing- in a short time period is mind blowing. 🎉
Amazing restoration with so much work put into it. A pleasure to watch
15:52 I like how you turned what had been pitting into what looks to the casual eye to be an intentionally pebbled finish. That's really imaginative!
Much appreciated feedback. Thank you very much
This is my first of your videos, but already, I can tell I love them. You, unlike some other "restorationists" on this site, know when to stop. Your reassurance that you won't make it smooth, because it shouldn't look like bad-quality plastic, made my day. Well done!
Beautiful work, that machine is now a beautiful work of art. Any candymaker would love to have it as a functioning restored antique, well done!
Thank you
Your best restoration yet. Excellently done.
Crunchy garden slugs! Great video.
This one is definitely considered the least attractive name 😂😂😂
Extreme talent and craftsmanship. The best that I’ve ever seen!
4:52 Amazing cut, absolutely seamless
With this restoration you officially enter my personal top five restoration channel on yt
Thank you Mario
And the other four are?
@@rogierius mymechanics, chip channel, otnd, ladb restoration. Should be also in list Rescue & Restore but the channel doesn't upload for a while. I also like odd tinkering, awesome restoration, tysytube, thefabrik, Mr. Patina.
chip, my mechanics, this channel... my 3 favorite in no order
What a weird and utterly wonderful thing. Absolutely stunning restoration.
Definitely subscribing. You used spray lubes to help get it disassembled instead of doing it dry. Your work is incredible, detailed and methodical, but you dont just destroy everything and make new parts. Definitely keen to see this style of restoration video again 😁😁
Finally, another actual restoration content creator! Thank you so much for taking the time to show your passion for restoration through this medium. It's immediately apparent when you see a restoration channel that exists only to pump out content for content's sake instead of what time and care look like when presented to you. Excellent work, and you have yourself a new subscriber.
any real restoration channels you'd reccommend? I like Rescue & Restore, Cool Again Restorations, theFabrik, LADB restorations, and this channel so far.
I love the sandblasting and filing the casting lines. Sooo satisfying! And then the repainting! I'm here for all of it!
I don't even like beer, but I always look forward to the beer tests. I really wish I did like beer because you make it look delicious 🤣 The restoration was top quality, and the sweets looked professionally made! Great work!
I like the fact it actually looks old and used and not just old and then left outside in the rain for days on end, great vid btw!!
You sir, are a true professional.
Tegernseer! Ein gutes Bier nach so ein guten Video! 🍺
This is the first video you put out since I discovered you and binge watched every single video. So good to see another amazing restoration! And so impressed that you actually made candy!
I am so glad that you fixed and not replaced the handle old wood is beautiful you are a great craftsman
Not merely casting away that venerable wood, but restoring and preserving it was a master's touch.
stop motion AND good restoration?! what a gift! thankyou for your care and attention to detail, it is so appreciated :)
Astonishing as you usually accomplish all your stuff. You still have 'the mojo' and the best standards in restoration videos in this platform and I'm still amazed for that in each clip. Nobody is even close. Long live the king. Merry Christmas from Spain.
Excellent job. This is probably the best restoration of all the channels i follow that I've seen in a long time. The screws you said would be special? Thet definitely were. As far as rebranding the candy, i say just go simple. Candy Sticks.
The amount of knowledge and tools it takes to do this utterly amazes me! I love seeing things “made new” again!! Great craftsmanship!!!
I commend your videos, they are truly restorations and I speak as someone who has spent his career repairing things. It is a treat to watch you work and you do an excellent job!
❤ That trick with the wood was pretty nifty! Love watching your restorations come together and your editing is ON POINT!
Oh no, it is
That came out SOOOOO MUCH BETTER than I was expecting in the very beginning
Is it weird how much I love the sand blasting? It’s SO satisfying to watch.
Preparing the ingredients looked like more work than the actual restoration. Nice job.
Wow, the shine on some of those pieces after cleaning is crazy. Like new! Subbing!
Mis felicitaciones al restaurador. Su trabajo y paciencia es única
You just revived a absolute classic from my childhood bubble gum candy cigars. Just watching you restore this simple machine brings back so many countless memories of my childhood going to the candy shop to get my usual flavor of bubble gum candy cigars and possibly try any new flavors that the shop might making. And yes the candy shop i went made all there own candy using all natural & organic ingredients the shop owners were a husband & wife the husband was a organic chemist & his wife was a culinary school trained candy maker. Watching this video had the young kid in me saying im going to the candy shop.
If I could give you a standing ovation I would...that was just phenomenal!!!👏👏👏 Not only are you a master restorer - you are a really excellent story teller and film maker. A+++ for you yearly school report😻 Thank you for your entertaining and educational content over the year - I have learnt many things, but most of all - how to evaluate beer😸 Have a safe and happy Christmas to you and your family!🎄🎁 🔥🎆🍷
Beautifully restored! Maybe the cigars could be Würmer or Schlangen? They look a bit like some kinds of striped snake with the colors you chose.
That actually would work well in German
i love that you kept most of the pits
Not only do you do a great job of restoring these old things, your filing and editing is excellent too.
Wow... I am truly impressed. The plating improvement is incredible and the whole restoration with all of its details is amazing. Thanks for sharing and enjoy the candy :)
Thank you sis ❤️
Eres un gran artista de la restauración!!!! Saludos desde Santiago de Chile
I came here for the restoration. I stay because of the name of the channel, clever
THe old became new...water into wine....your kingdom for a well deserved beer.....thank you
Wonderful restoration. That machine is brilliantly designed. Candy kayaks?
Haha, I like it. Very imaginative
Lass es dir schmecken! Großartige Arbeit mit dem Nickel-plating, dem Griff... Das ganze Ding ist super geworden!
Peanut butter and jelly torpedos. That's what they looked like. That machine has never looked so amazing. Great restoration. Just beautiful!!
This was definitely SWEET! :-)
I know this means a lot. 😚
@@NTRprojectsmuch fun beim Ski fahren!
@misterpatina Danke mein Lieber. Wir sehen uns im neuen Jahr und ich freue mich richtig drauf
Always look forward to your projects and you never disappoint!! Much appreciation and respect for your work!!
I think you meant either “you never disappoint” or “you never fail to impress”.
Must say, one of the best restorations I've watched. Beautiful! Thank you!
most beautiful metal restorations ive ever seen.
Now this is a candy roller I haven’t seen at Lofty Pursuits!
Most impressed with how that knurling turned out. Looks like a jewellery design, almost. Also, stick with the longer form videos, buddy. Always good to watch you work
Your craftsmanship is out of this world! Stunning transformation❤
Very cool- I appreciate the detail you put into this, you clearly care a lot about the history of the object. Thank you for showing us!
Your videos are so well done! They really complement the excellent content. One is always assured of an enjoyable and entertaining time watching you. Thanks!
Oh - my - gosh. Like you said, when this was manufactured it was a machine, not a work of art. But you not only got rid of the casting spurs (and no stabbed 😢fingers) you literally made it a work of art and functional! Kudos to you!
Beautiful work! It's a pleasure to see these treasures come back to life!
His style reminds me of the "my mechanics" channel. Same calm and determined attitude, and you are not over-restoring.
Are you talking about Meine Mekaniker? If so, I thought the same thing as well. The backdrop and the way it is shot threw me off . The is another channel called Old Hand which is the same concept except it's carpentry and he uses a lot of hand tools. Definitely a lot of care goes into that show as well
Beautiful work, loved the improvements you made in the assembly process. I was fascinated by the aerator in the nickel bath, has it made a lot of improvement to the quality of your plating? What did you use to seal the handle? I'm assuming linseed oil. You are a man of many talents, candy maker added to the list. I wait patiently for the next video. ❤
It made the plating way better to be honest
An absolutely incredible restoral! Your understanding of mechanics really adds quality to your projects. I can't wait for the next episode.
Ну и что же тут удивительного и невероятного? Разобрал, почистил, покрасил и собрал. Надо же какое чудо?
I like the authentic look of the nuts and bolts very much. It gives the restoration a classic look with some subtle wear. Beautiful job, as always!
First video I have seen of this creator, he seems to go above and beyond even fixing it better than factory new
i dont have much to add, other than to say that i really enjoyed this and recognize all the work and dedication it took
He visto muchisimas restauraciones en KZhead, creo que ninguna tan bella como esta
Muchas gracias
AWESOME CRAFTSMANSHIP … thanks for sharing ..always a pleasure to watch
I’m impressed: you restored the candy roller and made candy to try it out😄👍🏼
Really nice job again! Been following your work for a while now and you are improving with every video it seems. As for a re-branding suggestion: how about 'Sugar Sausages'? Keep up the nice work!
Ist doch egal, wie die Süßigkeiten heißen - Hauptsache man hat genug davon! Gelungene Restaurierung wie immer. Gruß Tino It doesn't matter what the sweets are called - as long as you have enough of them! Successful restoration as always. Greetings Tino
Danke wie immer Tino
one of your best restorations yet, and we shall dub them "Sugar Stix"
I adore your method of restoration. IT'S A VERY GOOD JOB.
Wow. Your skills are amazing! And your editing is on par! New subscriber here!!
Wow! Wow! That was an incredibly well done project and was your best video so far! The time lapse was cool to watch. Lots of little interesting ways of doing things too. Fantastic video, sir. 👏
Thank you very much for your never ending support. Much appreciated my friend
Брехня.
Wow! The nickel plating was fantastic
This is a real and good restauration. Congratulations. Regards from Barcelona,Spain😊
Love it, outcome looks amazing, fantastic work! The trick removing the air bubbles from the plating solution with the air pump was really smart 👏🏼 Btw: Can I have some of those candies? 😄😄
Sure thing, just come around
Is there a specific name for the type of knurling you used on the knob?
Cross knorler I think
Thank you!@@NTRprojects
This thing is a beautiful work of art. Thank you
I really like the use of the subtitles. It provides some nice insight
Miniature Candy Baguettes maybe? :) (I read cigarettes not cigars oops)
Thats a good idea :D
Love it
Different coloring they could be unicorn horns @@NTRprojects
Nice job. They won't be fixing stuff made today in 70-100 years time as it only lasts ten years. Shows the workmanship of older items.
I just subscribed to your channel. Honestly, I think that is the best restoration video I have seen in my life. I like how shiny everything got, I liked the pacing of the cuts and I loved the beer testing. And I like the beard in your logo. My beard looks similar. Man I hope there's a good woman on your side because you deserve the best.
Best woman right next to me. Have a great start into the new week
Odlicna , profesionalna restavracija ! Cestitam !
Absolutely a work of art! Not just the antique but also of this man’s craftsmanship! Bravo! 🔥🔥🔥
I fell asleep 2 separate times watching this, so relaxing damn.
You actually made candy...I'm impressed.
Excellent job restoring that piece of history!
It's nice to see that you are reviving old items and the improvements you do. Great video, it's awesome to see what you do.