Real Mechanic Reacts to Horrible Tiktok Car Advice
Thanks to The Ridge Wallet for sponsoring today’s video! Check out www.ridge.com/DONUTMEDIA and use code DONUTMEDIA for 10% off your order today!
We hired 3 professional mechanics and forced them to watch Tiktok car advice to find out if it's as bad as we think.
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com/gp/product/B07...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com/gp/product/B08...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com/gp/product/B07...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com/gp/product/B00...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com/Milwaukee-2735...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com/gp/product/B07...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com/gp/product/B07...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com/gp/product/B07...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com/Milwaukee-Comp...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com/Adenna-Light-N...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com/Scott-Original...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com/Zep-Cherry-Cle...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com/AIDEA-Microfib...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.
You can see how nervous James is with that old school mechanic, he didn't wanna say anything goofy 🤣
Because them old heads will tell you when they think something you’re saying is stupid.
XD
I thought that dude was Montel Williams in the thumbnail lol
Just look at him, that Ese might give James a smack if he gets out of line. Looks like he might have learned auto mechanics while he was doing a bid.
Ya he keeps looking over before he says anything lol
All the guest stars were amazing. The guy with James really radiated "stern but super knowledgable dad" energy
The type guy where if you get on his good side you'll learn a lot from his experience but if you date his daughter, you'll always be questioning if the crowbar he's holding is for you or the car
They were all great, give that lady mechanic a permanent gig on the show guys come on
No, this was trash hosting trash, bus rider. Buy a car and hit the forums, this channel is literally for people with skateboards and BMX bikes.
The girl was brain dead fym lmaoo
@@emrico1 wow really? 🤣
11:00 I used to work for a roadside company, and the advice they gave us when doing tire changes was 2 things: always use the stock spare change tools in spite of issuing all of us hydraulic jacks, and make sure you use the jack points. The reason for these two points is simply liability coverage. Several times I had jack points fail to live up to their purpose(IE damage the car), but because I used the included tools and designated point, the company and my job were safe.
Very good advice thank you
I always questioned how plastic wedges could stop a car from rolling until I forgot to remove them and tried to drive. That thing didn't budge and now I trust wheel chocks completely 🤣
That bit where the car started rolling on the guy scared the hell outta me. In 1982, when I was 8 years old, I was playing in my friend's back yard while his dad was changing his oil in the yard with the front of the car on blocks. Unfortunately, he neglected to chock his wheels and, considering the blocks were on dirt, he wasn't in a very safe location. He was under the car when it rolled backwards off the blocks, crushing his chest. His mom called 911 and my friend and I watched his dad die over the course of about 5 minutes. The ambulance arrived only a couple of minutes after the man passed. I can still hear my friend's mom screaming and the gurgling that man made as he tried to breathe with a shattered chest. This was an awful and excruciating way to die and I had nightmares almost nightly for the next year or so. Hell, I still have occasional nightmares about it today (40 years later). Do yourself a favor. Chock your friggin wheels!
Holy god damn. Was he trapped under the car still? Not that being free would help much with a crush ribcage
@@michaelwerkov3438 The car kind of "bounced" on the shocks when it fell off the blocks and the "bounce" is what crushed his chest, so he wasn't really trapped, but he wasn't going anywhere. He had blood coming out of his mouth, nose, eyes, and ears and he couldn't get enough air to say a single word. Like I said, I still have nightmares about it today, 40 years later. If you ever work under a car, make damned sure that car can't move while you're under there.
@@watchyourtimeco1 facts thats why I shake the hell out of my car whenever I'm getting ready to get under it😂 and always triple check! Rather have it fall and break something than have it fall on me. That story was horrifying btw I feel for u.
150 bucks for a wallet hahaha what a joke! Store a 1/4 of your cards and cash but pay 10 times more. No thanks
Oh man I bet the noises were incredible
The forged vs. cast joke in the beginning made me do the half swallow half laugh and choke on hot coffee. Real mechanic stuff.
"Believe the experts,Enjoy your life" "Believe the tiktok, Ruin your life"
My dad used to be a farmer and he worked on all of his own equipment and I was brought up with this fundamental dislike of engineers and their inability to foresee real world application, problems and solutions… Engineers!?! I feel you on that one
farmers are some of the best mechanics , because they had to fix broken machinery out in the fields!
@@fransmith8992 it’s true …problem solvers extraordinaire. Physics, geometry, algebra and chemistry Also, electrical, construction, plumbing, meteorology, psychiatry, first aid, love, toughness, survival skills…. You know, life😄 farmers for Nobel prize!! My dad is awesome ..just sayin.
@@Clash-Clown 🙂
And as a man of his word, he ditched his tractor and went back to pulling his plow with a horse?
@@gooby1648 he actually sold out of farming and ended up as a department head in the Battelle laboratory organization… based primarily on his ability to streamline applications and maximize efficiency in the mechanical processes of their labs. I still stand in awe of my …Mc/dad/Gyver and his brain power
Belts are good for removing all kinds of things from cars... like filters and shafts The wire trick is used by electricians all over
Both of those are something I just learned now
My favorite mechanic anecdote came from a letter a pilot had wrote to Readers Digest & went (something) like this.. During the last hundred miles or so of my flight I was concerned about a noise coming from my left hand engine although there seemed to be no effect on performance. After landing and taxing to the hanger I found the overnight ground crew mechanic was on his break so I left him a note that said "Unfamiliar tapping sound coming from lefthand engine" On arrival at work the next day I was handed a note from the previous nights mechanic that said.. "Ran engine all night, noise is now familiar"
Ayo bruh FAMILIAR?!?
@@symphinitystugiii3476 That is the right spelling isn't it?
@@chipsthedog1yes and no I'm not talking about spelling it's the story ok ✓ :)
🤣🤣🤣
This kind of story reminds me of something I read in an unrelated field. In Brian Herbert's biography of his dad, Frank Herbert, he tells of how his dad always kept a pen and pad next to his bed so he could jot down ideas he had in his sleep. One morning the family hears Frank Herbert cursing after waking up. It turned out that all he wrote down in the middle of the night was, "I just had the most awesome story idea!"
As an ASE certified master tech this is great to see. Most yt videos and tiktoks are full of misinformation
I haven't professionally turned a wrench in over a decade. In my sliver years I watch YT vids to help me decide if doing it myself is actually cheaper or done rite the 1st time. Some jobs it's Hell No; take my money. lol
As a person with eyeballs i have to agree
a lot of people have janky ass busted "modified" cars.
Yeah. Agree
As a certified personal trainer, TikTokers had already poison the fitness industry.
11:15 a good tip when using jack points from the side is make sure the wheels on your jack are pointing the right way and its rolling a little each time you lift. The jack should be able to roll or your jack point will move instead and slip off. This can happen if the ground you are on is pitted, too soft or there is something stuck under the jack wheels.
This format of video actually works well in this genre. You guys are the pioneers of a tried and true formula. Good Shiiii!
You can tell a real mechanic just by the way he talks. Dude knew the lines were backwards. My mind went to the GM issue where the angel sensor fails and tries to “find center” but it does a 5° spin to either side.
*angle
i think its not about real mechanic, its about experience i do believe they are all real mecanic just some is not have a high fly time
@@StanleyKubick1 No, he meant angel. If the angel sensor fails, a demon can possess your car.
@@MyChevySonic i have an idea, i'm gonna buy a challenger sxt and disable all my angel sensors, then hopefully i'll get a Demon
I’m a biologist with no mechanic experience, and I watched that power steering fail and thought to myself “the connections are backwards”. I don’t believe that girl is a mechanic if she didn’t even know that
The extension hack reminded me of when I was trying to do the brakes on my VW. It’s a triple square socket, and I could only find 3/8 drive locally. The idiots that had the car before me never changed the rotors out, so the caliper bolts were crusted into the holes (aluminum hun with steel bolts on a then 10 year old car in Pennsylvania). My air impact wouldn’t do the job, so my dad and I got an idea. We had a 3/8th adapter on the socket, with about 3 feet of extensions, to a 1/2 inch breaker bar, with a 4 foot jack handle and me jumping on it. We broke three adapters but it by god we got it done lmao
After fighting with few pairs of rear discs in golf mk4/5 based cars and cursing on engineers responsible for brake carrier fit, I found out you can just leave the carriers on, and still be able to take off and fit new discs (and I think it also works with front ones as well).
I’ve had to use the old cheater bar technique a few times myself. I’ve also broken several nice socket wrenches doing it lol. So if you have no other option try and use a cheap wrench is my advice. That way you won’t be out so much $ if you do snap your wrench.
Haven't had to do anything like that but I've run into a few "you know, this probably worked great when they tested it with pristine parts instead of actual use conditions." Bolts that would just spin so you had to figure out how to secure the other side (which would be in some crevice or the other side of the car), stuff like that.
I stripped the last one so i just used my grinder on the head, popped the rotor off and used pliers on bolt. Was replacing them anyways. Took like 5 mins
Vietnam flashbacks to me trying to get the axle nut off my mk4 Jetta. 18in 1/2 drive breaker bar with a FULL jack handle to get that bad boy off.
As someone who fiddles with first surface mirrors, lenses, and optics for lasers, telescopes, and microscopes, the coffee filter as a low lint/lint free wipes is 100% true! I tried so many other wipe alternatives, including making an updraft hood, and a filtered cross flow hood to keep stuff off of optics I was cleaning to avoid buying kemwipes all the time, cheap basic no frills coffee filters absolutely work for cleaning surfaces without leaving fuzzies. HOWEVER, you can still scratch mirror finishes or optical coatings, so be careful (if you're doing optics stuff, that is. I imagine steel cylinder walls are a bit more resilient that a few atoms of optical coating).
you should never wipe glass with paper.
@@fransmith8992lol the best thing to cleaning glasses here is a newspaper but never dry.
i have used youtube and google but i am always so so SOOOOO glad i bought the repair and maintenance manuals for my vehicles. even if some things aren't really very easy to figure out from the terrible pictures and jargon filled instructions, far more often than not it makes things easier, and at least from the number and complexity of the steps you get an idea of how long it will take and if you want to do the job or get help with it
The unchocked car one really resonated with me but for a different yet similar reason. As a pilot and specifically a flight instructor I can safely say that many flight schools, FBOs etc don't have level ramps and chocking planes isn't just enforced, it's necessary. At one airport I flew into, I saw a Cessna slowly start rolling across a ramp toward a $8 million King Air and a student frantically chasing it. He didn't catch it. Nobody was hurt as both planes were empty at the time.. nobody except the accountant at his flight school, probably. But from that day I always made sure I remembered to chock my aircraft at unfamiliar fields and tell my students to do the same.
As a cargo Ramp Agent I have seen what happens. At our field we have a separate person talking to the pilot during a pushback. Batmobile lowers, and the plane starts rolling around when they forget to ask the pilots for break while telling the pushback to undock.
At Nellis AFB we'd see ladders "walking" down the parking apron in the strong winds because someone left them standing unattended instead of laying them down on the ground.
@@HiroNguy Did the aliens ever make those mistakes?
@@atuck6082 😆😆😆😆 Of course! How else you suppose they learned telekinesis to make ladders walk? You don't think it was the wind, do you? That'd be too simple and logical a 'splanation.
As a retired Bureau of Standards Lab Tech, I TOTALLY approve of the Coffee Filter Hack. It's a trick we used in the Lab to clean or lubricate extremely precision equipment.
I feel like I'm to dumb to be here
@@Aqu1ls_Curr3nt Don't feel bad. I'm almost 70 and I'm still learning tricks, and I've been a wrench bender since I was a kid in my Dad's garage at his Sinclair Station.
@@WilliamEades_Frostbite yeah but you actually have the brain capacity to understand what these words mean. I genuinely don't believe I could ever even remember all of the things it takes to build an engine.
@@Aqu1ls_Curr3nt I've lost track of the number of times I used a Shop Manual to work on something. That is why I have always bought the factory service manual for every vehicle I've owned.
@@Aqu1ls_Curr3nt Idk man they're really not that complicated when it comes down to it. Yes they're hard to put together and have many many components that all need to be vey precisely installed but I took an engine apart in my pre apprenticeship class 6 years ago and it was not that hard to do. I still remember most of the process and that's the only engine I've ever actually stripped down to an empty block, putting it together took a bit of effort and thought but yeah it's really not too complicated to get into. Don't doubt yourself before you try it, It was quite the expereience and it was so much fun holding the internals in my own hands and seeing what you never get to see
I find this all funny as I am a seasoned diesel tech, Id love see one of these for the heavy duty side of things. Not pickups but commercial trucks. I've seen a lot of funky or off the wall repairs that have been made previously by either drivers or other mechanics.
Same here. One that comes to mind is slowly pouring water into the intake of a running engine to clean the valves 😂
The coffee filter thing is pretty neat, would have to see the oil filter after running it, lint from regular and heavy duty paper towels will actually clog an oil pickup tube and filter, you may not even see the lint when assembling the engine.
The comment in the vid about mechanics hating engineers is very true hah. When I was doing my mech eng degree an ex chief engineer from Ford was our lecturer. I quizzed him on why their designs made it extremely difficult to work on some models, and whether they put any thought into that - the answer - basically zero thought. The vehicle was designed to last for five years, after that it would be scrapped and the difficult parts would theoretically never actually need replacing. As you can guess, I hate working on Fords!
We had to spend about 2 engineering units worth of time with mechanics to lessen the chance of us designing something that’s impossible to work on.
As a software engineer we do the same with code. Maintainability? Eh, only if project isn't behind schedule...and we're always behind schedule. (only slight exaggeration)
For this reason i wanna have a talk with the guy who designed the 2001 Nissan Altima lmfao🤣
One of my aerospace engineering professors liked to emphasize in our design class that "a mechanic is gonna have to get his hand or a tool in there" for maintenance and repairs.
Hino comes to mind. Most components can't be accessed without tearing apart several other unrelated parts.
Being an aircraft mechanic (mainly working on small airplanes) modifying tools to get to stuff was the name of the game. I specifically bought cheaper sets of tools to rig them as needed, instead of using up my MAC or Snap-On tools.
Same. Been working on planes for over a decade. I have a harbor freight set of wrenches that are ground, bent, and chopped for various specific jobs, and a nice set for normal ops.
Like cylinder wrenches. Make them or buy them off an old guy.
And having worked with Military Chinook mechanics, I would _never never ever_ fly in a plane you worked on. It's dangerous enough to play games with spec on a land based vehicle. It's a different level when your aviation mechanics get 'inventive' before you end up a mile in the air. There's a reason they never d*ck around with hacks or skip a castle nut & cotter. That's how news stories about 8 dead soldiers and 2 dead pilots happen.
@@WindFireAllThatKindOfThing If the Chinook mechanics dicked around with specs or omitted hardware/steps, they were shit mechanics. Every aircraft mechanic has strict guides to follow, and modifying a tool by cutting it, grinding down it's thickness, or bending it - all to be able to gain access, is not dicking around with specs. I don't know how you made that leap.
@@WindFireAllThatKindOfThing the fuck are you talking about. Modifying or making your own tools isnt dicking around with specs. In fact some Honeywell manuals ive dealt with literally give you instructions on how to make your own fixture or tool. As long as the part is in spec and operates correctly it really doesnt matter what you use to do it.
This was a fun video to watch with my husband, whose a mechanic of 25+ years. We'd love to see more like this.
I love it when the mechanics are honest and give a answer explaining what's wrong even if I don't know what they're talking about
Coffee filters can also be used for detecting fuel in the engine oil, drop a little onto the filter and watch it expand out, if its tainted the fuel will travel outward quicker than the oil, leaving a ring.
Would never work for me as I would quickly run it of filters from making coffee
there are lab analyses that work similarly! 👍
@@daszieher someone gives you a right here right now practical solution and your answer is I rather send it out and wait 12 days 🤌🏽🤓
@@joshuachandra6677 Ah, I probably wasn't clear enough. I meant to say that that is a great solution, because professional laboratories use the same effect with paper strip tests of characteristics very similar to coffee filters.
@@daszieher 30 seconds DIY. Three weeks for lab results...
11:51 there's honestly a chance I designed that noise suppressor. They were initially used on passenger car vehicles (tiny turbos) to reduce noise however when it was discovered they also improved efficiency and helped with surging we started using them on commercial applications as well. If you remove the noise suppressor you'll get more noise but you'll also actually loose efficiency as well. That design is "cheap and simple" but the motorsports team made some insane optimized ones that really allow the recirculating airflow to efficiently re enter the main flow stream without causing much turbulence. TLDR: leave the noise suppressor in if you wanna go fast.
On second pass based on the nut on the compressor wheel I'd say that's not one I did. Looks like it may be an MHI turbo although on larger turbos I'm used to seeing them use copper nuts.
I was looking for a comment jusssttt like this 👌
Oh, no worry, that guy painted his intercooler white to make up for the loss in efficiency. (:
I’ve seen the same video over and over and no believe it does enough to keep it in over noise. If you don’t care too much abt efficiency then sure take it out. Let it scream! But if power and fuel economy are your main concern then leave it in. Your best bet is to just delete your emission for better fuel economy and power
@@Donniec685 Wrong. Modern engines work better (more power, better fuel economy) WITH the EGR hooked up.
I did the same stupid thing with popping the driveshaft off and not realizing it was what was keeping the vehicle from rolling. I have an angled driveway so I should've known better. Fortunately, it was my '85 Bronco, so it's at least tall enough that I can get underneath it to work on it without jacking it up. However, I was at a 90° angle to the wheels (body underneath, legs out the side). As soon as it happened I realized what I did and I knew there was no way I could get out from under it, so I quickly pulled my legs in, flipped over, laid on my stomach and got flat to the ground. I was also glad I remembered what side the front differential was on and went to the opposite side. That probably would've done some damage... Let it roll over me and out into the street. I don't remember even getting hit by anything but I was scraped up and bruised all over my back, ribs, legs, and arms and had to wait a minute or two for the pain to die down before I went and got my Bronco out of the street. "Teachable moment" is a really good way to put it! I use wheel chocks for anything now.
Just when you think you are safe, along comes the hitch receiver...
Hint to the guy pouring atf into the oil fill..turn the bottle 180 and put the pour spout on the high side so you don't dump half your fluid down the side of the bottle. The container will be closer to horizontal before the fluid comes out. Thats why ALL containers are made this way.
4:44 Random Auto Shop Story Time...Years ago when I was young working at a brake/muffler shop, with little experience. I was trying to remove a stuck u-joint out of a drive shaft I had clamped in a bench vice. I was hitting it from the top down because I was worried if I hammered it from underneath. The bearing cap would fly off & hit me in the face. My boss was getting frustrated with me because I was taking "too long" (it was rusted stuck) Before I had a chance to say anything. He pulls the hammer out of my hand & says, "Here !! do it like this !!" & starts hitting it hard from underneath. A couple good whacks with the hammer & the bearing cap flies off, POW !!! right into his face. Splits his lip open (I thought he might need stitches) I said, "Umm, I was scared the cap was gonna hit me in the face like that.That's why I wasn't hitting it from underneath." Same shop.... They learned the hard way, the floor drains in each bay were connected...One guy was changing a fuel filter, a bit of gas from the old filter, dripped on the floor right by the 6 in round drain & went down. The other bay had a big square 60 lb steel plate covering an access hole in the floor & a car in it, up on a lift. After the fuel filter job, same guy pulls a car in, to cut off the old muffler with a torch. Everything is fine for a minute into sparks start falling down by the drain. He knew he had only dripped a little bit gas & not enough to make a big fire, plus it should have been evaporated after a few minutes. What he didn't know was, gas fumes were building up in the drain. All the sudden KAABOOM !!! the 60 lb steel drain cover in the other bay, flies up 6 ft & hits the car on the lift.....Luckily no one was hurt. If someone had been in the other bay, standing on that plate. They would have been seriously injured. Why I'm typing out some long ass story, I have no idea...
how can people be so brain dead
A great reminder to think during practice.
I have a HARD time believing all of that...
(Hopefully) live & learn (hopefully) lol
@@davelowets I don't. You have to remember he was young and often some bosses are assholes. The gas build up story is absolutely believable and not sure why anyone would lie about it.
As a scientist, I can tell you: the coffee filter stand-in for emergency lint-free wipes is 100% true. I've used them myself. Wouldn't use them for anything delicate like cleaning optics, but for most purposes they will do in a pinch.
And they also serve as a good stand-in for doing titration resultant collections.Not perfect, but damn good.
Yah but why not use the real thing, actual microfibre cloths?? 🤔
Same, I’ve used them as KimWipe alternatives many times.
I'm pretty sure most scientists use coffee filters for brewing coffee because in the movies they are always spending weeks straight in the lab trying to find a way to stop humanity from going extinct. Obviously all my knowledge comes from movies and television. Obviously.
@@mikedrop4421 Yeah, that checks out.
I have seen the soap in the coolant reservoir hack performed before, not to clean the reservoir but to clean the cooling system after the oil cooler leaked and allowed oil and coolant to mix. You use liquid detergent ( I believe the tech used Wisk ) and you only put 1/4 cup in and then you have to flush with just water several times to get everything out of the system.
Dawn works sort-of-okay, better than the other dish soaps I've seen tried, but the purple degreaser stuff is better in my experience. The heater core is often overlooked, and it doesn't respond as well to the detergents because the flow through it is not all that fast, so I like to give it a direct flush with a siphon gun if there's a way to access the hoses easily. Otherwise, it may come back gummed up with emulsified oil sludge. No matter what else you do, flush it enough to get all of the detergent out or you're asking for foaming to cause cooling problems.
Another way to pop tie rods is by hitting the knuckle/spindle. Where the threads sit in, that area is generally very tough and you can smack tf out of it w out damaging anything. Im a Nissan technician and i use this daily for anyone wondering. (If you miss and hit the threads, its curtains for the tie rod though lmao)
One hack that was not mentioned during the trans fluid in the engine oil segment. Turn the bottle in the other direction to pour. It lets air into the bottle and it pours much smoother. This hack is molded into the pour spout of every quart bottle.
Don't use trans fluid! Buy oil stop leak, it's made to mix with oil! Probably the price is similar!
true, this works for all kinds of semi-thick fluids in bottles not just engine oil. we have big metal cans of olive oil and do the same to pour nicely.
I learned this one last week on a transmission swap, works beautifully
That bothered me to watch it done incorrectly as well.
thanks not a hack, thats just people using it incorrectly
Real mechanic stuff
Thanks mechanics, my car is playing knock knock whos there with me, pretty fun lately.
@@bageltondinglequandaleseba6928 Right, I’ll send someone over to pick it up and inspect it, what make and model of car is it and what is the address of its current location?
This was truly a great video, entertaining, and I learned a few hacks. Kudos to y'all
As a retired auto technician with over 50 years of work experience, and now work part time at a major auto parts retailer I always tell people who ask for advice how something should be done, I’ll tell them how I would do it and also go on the internet and watch several videos about it and use their heads to figure out what is BS and what makes sense. The guy who thinks that he knows everything is usually full of 💩!! I’ve been working on cars professionally since the early to mid 70’s and I still don’t know everything!!
L take
Yep, I found that Marvel Mystery oil is better than T-Fluid for softening and expanding rubber 🦭seals🦭. BUUUUT, 🦭Seal🦭 technology has advanced with newer materials in the last few decades to be more heat-resistant, preventing the 🦭Seals🦭 from drying out and becoming brittle. This makes even Marvel and the weaker T-Fluid less effective, so YMMV. Got an old clunker 70's-80's GM vehicle grazing in the tall grass?? Wanna see how good Marvel Mystery Oil really works? Take the Brake Master Cylinder cap off, take the large rectangle rubber boot out and take it back to your shop. Grab a shallow plastic container (a lil larger than a sandwich container). Fill the container half way with Marvel and sit the rubber-boot in it over night. LOL you'll never be able to reinstall that MONSTER rubber boot ever again!! *(WARNING!! May cause those of weak constitutions to loudly REEEEEE and/or Scream-Squeakle.)🤣
@@MAGGOT_VOMIT any oil will do that. During my work career I ran into several times some dingaling put power steering fluid in the master cylinder and then if it had disc brakes the calipers would lock up. I would take the lid off of the master cylinder and it would expand 2 or 3 times. Then to clean up the mess correctly you have to replace anything else that had rubber in it including hoses and so on because the synthetic rubber would fail and if they had brake problem after you fixed it lawyers would come after you. You are correct they have been changing engine seals the last 20-30 years because of high temperature and the low viscosity of modern motor oils.
@@Cobra3901 You haven't a clue what you're talking about. No, "any oil" will definitely NOT do that. Simple low grade oils like t-fluid and especially Power-Steering fluids will do nothing to brake system seals. Brake fluid is used because of it's extremely high boiling-point. Oil in a brake system would boil at the brake-calipers and render brakes almost useless. If the oil scorches from the high heat it will sludge-up the brake system. You don't have to replace all of those components. You just have flush all of them with a solvent to remove the contaminated fluid. JEEZUZ!! 🤣
@@MAGGOT_VOMIT ur outta ur mind. Oh I forgot you worked on cars professionally for over 40 years. Go ahead and dump power steering fluid or any other kind of oil in the master cylinder and see how long before you need to overhaul the entire brake system. 😂
The amount of people on tiktok trying to educate people on things they don't know is exactly mechanics won't be going anywhere any time soon
First time replacing my drive shaft this happened to me, car was on a hill and would have crashed into my other car, thankfully my jack was right underneath the car and the tire hit it and stopped. Learned a very valuable lesson. And felt like an idiot for not realizing that was going to happen.
An older man from my workplace retired, and in his first week of retirement set out to restore an old car and killed himself this way.
@@theundergroundlairofthesqu9261 wow that sucks!
Username checks out.
06:00 I love how the sign on the container specifically shows you how to pour the fluid out and yet this guy does it all wrong. Definitely makes me want to take his advice!
Just have to say the belt & wrench trick for holding a pulley works fantastic for oil filters too. Always keep an old belt in my box.
10:48 The guy responded to his video due to all the blowback he received. He had the correct jack point, but he was using two hockey pucks to make contact between the jack and the car. As you can see, his garage has a crack in the floor, so his jack wasn't moving as the car was being lifted, causing the pucks to shift. Before he could catch it, disaster struck (pucks slipped off, car connected with the jack OFF the jack point, and voila).
He should have placed it correctly and purchased slotted extenders. Or, he could have used *ONE* puc and slotted it with... ... any number of ways. Not that he needed them: that jack had plenty of lift left and why was he lifting the car, on the side, for any other purpose than to change a tire? Was he hoping the stiffness would raise the other side? He cannot put a jack stand where the jack, he was using, should be.
@@LilRedDog not sure if its the same case here but I've worked on a couple of my buddies cars that are too low to the ground to get a jack under it so you put the back end up on ramps and now you cam fit a jack under the side but not the front
You said “Jack off”
@@hankhasemeier6887 I can see that happening. If that were true here, why in the world did he add two, slippery, spacers? And he should have had the wheels pointed in the direction the jack would need to go. Look at the jack wheels: The ONLY way the jack has to go is sideways.
@@LilRedDog I can't explain using two pucks. That just seems stupid to me. Just trying to explain why he would be jacking it from the side
I love how they both said "it's a BMW. Who cares" earned my thumbs up with that statement alone.
Forged in Truth then 🤣
Why do BMWs get so much hate 🤣 is it cause only dentists drive them
@@Life_of_Matthew They're 90% plastic with expensive proprietary parts.
@@Life_of_Matthew Because they're held together by prayer and tape. Built like dog shit. I say all of this as a driver of an old bimmer 🤣😂
@@Life_of_Matthew Because they're expensive RC cars now with a subscription model. If you didn't think a car brand could get to Blizzard/Activision levels of scum, there you have it.
Amazing video! Happy to see how happy Adam and Nolan appear to be!!! Awesome stuff dudes!! ❤
Wow the first one I did with my dad around the same time this was uploaded and my dad used the break pads! I'm 30 and my dad is always teaching me new things. Shout out to all the dads no matter how old you are. 👍
Funny thing about a battery powered ratcheting wrench is that it still works like a non powered without the battery. He could've broke it loose manually instead of "neutral drop"
thats what i was thinking lol
Ik lol the one I have anyway.
i dont have a battery powered ratcheting wrench :(
Nah man, neutral drop daily.
@@lukes.9574 Well, get one. 😂
Been turning wrenches for 😭😭 52 years, you guys were totally, absolutely, beyond a doubt, keeeeerect on all the tictoc assessments. The pile of pucks when jacking, and wheel chock advisements were my favorites, now I know what look I had on my face those many years ago.
The extension trick is definitely one that everyone has used at some point. I was just doing some work with a car, that the bolts and screws (two of each) were on the firewall, about 8" deep behind supporting metal. There was room to get my hand, or a wrench, kinda, but not both. To get to the screws, and to be able to put a rachet on them, I had a u-joint, and a couple sloppy loose extensions on. Not wobble extension, they were just really worn. And to see what I was doing, I was using an endoscope. The jack drop was horrible. I'm always worried that will happen. As such, I do extra checks constantly, just to make sure I'm both on the right spot, and that the jack hasn't moved while I was starting to lift it. There is no harm in rechecking it. There IS harm in it slipping, bending body metal and the door frame. Poor guy. Hopefully that was a learning experience for him. I hope the body shop is gentle, but I doubt that will be cheap.
All of you are such charismatic and wonderful people. Love these videos.
Note about the nut on the tie rod: You have a much lower chance of damaging threads and making it difficult to remove by hitting the knuckle instead. No, really. 2-3 hard hits and it pops right off.
That's what I was going to say. Smack what the part goes through.
I'm surprised nobody mentioned this, Its how I've always done it
Yeah I've always smacked the actual knuckle too. Threading the bolt on the tie rod is good to protect the threads in case you miss 😆
2-3 hard hits lulz. I wish. I must have bad luck because every car I've had to do that on bout wore me out swinging my BFH at it.
That’s how I was taught to do them and still do 👍
The first one definitely needs to be done with a brake pad, to make sure you push the piston in evenly, and don't damage the points of contact for the new pads. The neutral drop hack where they're taking the seat out, um... why? Just break it loose, then hit your trigger. The box end wrench wire loom hack? You bet I'm adopting that one.
Firs the brakes my father always used this piece of wood (It was a name place, treated wood, they made a typo on), and a simple C clamp. Worked like a charm, ensured even pressure
@@Ange1ofD4rkness yeah, that works too. Really just about even pressure and using something that won't mess up the surface, so wood, being softer than metal, is perfect too.
I'm guessing theyre using it like a mini impact drill. The smack from the socket suddenly catching crack it loose. Still, not a great idea.
@@colbyscott9822 exactly. It's just laziness. Takes a few seconds to switch to a beefier ratchet, break the bolt loose, then switch back to your electric or air ratchet and back it out quickly.
Yeah, even just keeping that hammer against the piston and using 2 wrenches (one on each side of the wood handle) would have been a better idea
When Paul mentions cutting a wrench in half it reminded me of the time I did just that to get some bolt off the fuel pump while trying to fix a B7 A4...
I really hope Jerry got her number, she was laughing at all his jokes 😂
Coffee filter is totally legit. They're used in PC builds and with some painting to apply solvents or other chemicals/compounds without risk of leaving behind lint or fibrous residue.
100% true clean them up good and worry about anything left behind
There's a big difference trying to save money working on your own stuff and trying to save money and being comfortable cutting some corners, and charging professional prices for the best you can offer. This makes all the difference on some of these.
I Agree I'm not a mechanic, I'm an engineer, I.T. and Telecommunications so sometimes my clients will want to install their own TV Antenna's sometimes they try to put their own TV on their wall Now let's address those 2 shall we without going into any further stupidity I get that they are trying to save money and AS LONG AS YOU DON'T FUCK ANYTHING UP... Good for you, go for it, i have no problem with it because i didn't have to come out to fix it HOWEVER.... Putting up your own TV Antenna can cause you to fall off your own roof and kill yourself (there is a reason we are called professionals, there is a reason we have training) Putting up your own TV on a wall (my fucking god , can this one end up bad or what ?) well, first there is - Not knowing what measurements to take - then you fuck it up, so you end up with like 15 holes in your wall - then you have to figure out how to patch them up LMFAO - Now if you finally get the tv put on the wall, Most times you won't bother with studs, if that happens and your tv is big enough you may literally rip the gyprock off your wall and your tv will end up broken on the floor, PLUS YOU HAVE A MIN. $5,000 REPAIR TO DEAL WITH (instead of paying someone $300 or so ) to do it properly - Then you have metal studs - You may have a stud finder and it beeps and you figured YES!!! THAT'S A STUD but instead..... NO!!!!! IT'S A FUCKING POWER CABLE you drill in the wall confident as shit and you may actually kill yourself or.... You don't die, but you take out your electrical circuit and now you need to paid an electrician $600 to fix what you thought was a quick job NOW.. ASSUMING YOU DON'T FUCK UP ANYTHING AND YOU DIDN'T KILL YOURSELF which is a small chance first off you need to also understand - In your own home, you don't give a fuck as long as you saved money - As a professional however, Tradesman need to consider, Insurance, Efficiency , speed of the job, Time is Money etc etc Safety , will this next roof that i step on cave in on me and will i die so when you paid a tradesman you pay for a lot there's experience, there's knowledge , there's insurance, there's Piece of Mind , a lot goes into it so ... Try it yourself, for sure, BUT MAKE DAMN SURE YOU DON'T FUCK YOURSELF IN THE PROCESS
I knew an old timer who used trans fluid in the oil to remove sludge on cars that sat forever. 3 cars I witnessed doing this without a rebuild and I know 2 of them went on over 50k miles after. 1 was a Labarron and the other was an old dodge
9:44 i used to work as a shop hand in a dealership service shop and i helped an older mechanic unbolt and bolt up several transmissions on trucks. Easiest way to unbolt the top of the transmission from the engine was for him to stick 4-5 extensions together and i would hold the socket on the bolt while he stood 3 feet away at the BACK of the transmission to use the impact.
The jackpoints are easy to figure out, the cars i had (VW, Citroën, Volvo) had markers on the chassis, like little triangles, or a small flange that did fit in a slot in the lifting pad. That last one was pretty clever, because that also prevents the jack from slipping out.
Best jack points I've ever seen, as long as they're not rotten, is the ones on a Porsche 914. You take a plug off, slide a bar into the car, and the jack doesn't even go underneath. Hard to mess that up lol.
On VW it’s basically impossible to get it wrong. My dad got me to replace tires as a kid and I never got it wrong. When you put the top of the jack in the correct spot it basically can’t move in any direction
It looks like he was on the jack point but double stacked hockey pucks and the top one slid out.
The real issue is that the jack was not rolling forward because the floor is so pitted. As it was lifting up the puck was sliding outwards under the car instead of staying with the car as it was lifted. Had the floor not been so pitted, and the jack was able to roll to stay under the jack point, then this may have been prevented.
@@boostaddict_ My mates old 93 w124 mercedes has that system but we both hate it lol. Takes ages to jack up a single wheel and the jack that came with the car is almost falling apart by now even though the car is almost immaculately taken care of. Still have to use it though because it's lowered and we can't fit a normal jack underneath it
Coffee filters make excellent lint free towels. I've always used then to clean my car windshield and they don't leave a speck of lint behind. They also make great phone cleaners and they're great for quickly cleaning off optical sensors. Any time my bill validator quits working well at work, a quick wipe with a filter cleans it.
Thanks these are good ideaa
these episodes with mechanic reacts is AWESOME!! love the content (:
About the transmission fluid in the Oil hack, had a leaking rear main in my ‘89 Ranger and poured about 2 shot glasses worth of tranny fluid in a week before I changed my oil, I went from burning a quart in a week to going 1000-1500 miles without having to worry about it
“There is no water behind the new emblem.” “…but there will be.”
2:39 could work, but honestly I just index the bolt and mating surface so I know how many degrees I've turned it. Showing that you've turned a bolt/nut 45, 90 or 180 degrees doesn't require a $500 wrench.
Good tip. My cheap Tengtools torque wrench has an angle gauge on the head I think it was about $180
Same, you never need to overturn by 17.9 degrees or something, it's always nice angles like 45,90,...
An angle adapter is only like $20 and won't slide off the wrench. I wouldn't use it for racing or aviation were precision is needed, but it works just fine for the average rebuild.
and it doesn't need to be perfect...there are tolerances. 5 degrees either way won't make any difference, and you can eyeball to that precision.
You can rent a Torque Wrench.
The coolant reservoir one, if you look at the bolt/screw that's holding it in, you can see that the grooves where the head of the Phillips head goes in changes. Dirty one, one of the grooves looks like it could line up with the edge of the tank, but the "clean (new)" one, one of the lines would diagonally go across it.
Also, the hose clamp on the larger hose is in a different spot.
@@61rampy65 Good observation. Of course, this is ignoring the obvious fact that the outside goes from dirty to miraculously clean. Like, how is the inside supposed to clean the outside like that? Not only that, but only clean the tank and nothing else? What's even worse is that there are people who will believe it despite how obviously fake it is.
Loved my 68 z/28... roll cage,fire extinguisher, 2 shocks each wheel,ect...bought for road racing...looked for Mach 1 stangs at night...FUN TIMES.
Its good to have professional opinions on many of the things you see or hear online on car fixes. You never know what you doing gonna fix or harm your car more. I've been friend with a few old school mechanics and many tines i had an earfull when i was about ti do something stupid but in the end, my 25 yrs old car still run like almost brand new. Love that old car even i have newer one as i stick with me thru thick and thin. Never been stranded roadside.
Using "old school" method is often only trustworthy on older vehicles OR if they're still working on new ones and have current experience to go with the old. I have a relative with tons of experience on cars up to the 80s/90s, but he has broken a few things on newer cars using the old ways. And even some older cars may be unusual, so always do the research. For example, he wanted to use a C-clamp to compress the rear brake caliper cylinder on a 90s Miata. Nope.
@@espokane hi there. Correct sir and agree with you. Once a friend of mine disconnected a newer vehicle's throttle body for cleaning but did as how he been doing for an older vehicle. Cleaned and moved the internal parts by hand. He later had to replace that throttle body. So knowing how to fix 80s and 90s vehicle doesn't mean all can be applied to newer ones. Some of the basic like wheel, brakes, light bulb/LED, coolant, lubs and fluid may remain the same but many part have changed and you do need to do research and have knowledge before tackling the newer vehicles. Thanks for the info and reminder. Cheers
@5:59 - This is always a good sign when someone is purporting, in even the most remote sense, to be an auto repair professional: Pouring with the quart bottle's offset spout toward the ground. Almost as if exhibiting an unthinking, contrarian spite, in extreme overkill to any possible feelings elicited by the innocent little diagram, stamped into the neck of the very bottle he's pouring from, between his hand and the opening. Spout toward the *top* while pouring; not toward the bottom (like we all seem to default to, before we learn better). He can be forgiven for a bad pour, while holding a phone... But he just spills immediately, thanks to disregarding the diagram. When you hold it spout-down, you can't pour it fast enough to keep it from dribbling down the side of the bottle, while also pouring _slow_ enough to keep incoming air pockets from disrupting the fluid flow - giving you the uncontrollable "glug glug glug" we all know from rinsing out a milk jug, or other large plastic bottle. Rather than cleanly pouring, or having rags or a funnel - any of which would telegraph a modicum of experience - there's nothing to keep it from dribbling down onto, you know, _a wide selection of important rubber parts that petroleum-based oils/fluids/greases will cause to soften and disintegrate._ The only thing that would make sense, after that total biff, is an exasperated narrator exclaiming "there's gotta be a better way!"
8:11 Just get some prying tool (or wrap a soft cloth on a regular screwdriver), get it going and then get in a flattened straw and just pull it up. No damage.
I've done the using a belt to hold a pulley before. It worked really well for getting the crankshaft pulley off during a timing belt change. I looped the belt around the wheel then wedged a breaker bar through the belt against the frame. It worked great.
A note on the nut-over-the-threaded-end thing that I'm surprised nobody mentioned (maybe they did but it was edited out) is if you're reinstalling the same tie rod end, often those nuts are castle nuts - flip them upsidedown so that you beat on the smooth surface, and the castled section is not damaged by the hammer. Screw them on flush with the end then back them off a quarter or half turn so that there's no contact between the hammer and rod end, but you have as many threads grabbed as possible to minimize the strain on each thread surface.
Much easier to go to your local autoparts store and get the kit to do it. I know at autozone and oriellys its free
Most mechanics have a tie rod separator.
When you remove a tie-rod end, you loosen the nut then strike the CAST outer part, not the end of the threads. The shock onto the spindle shocks the tie-rod out of the taper. There is NEVER any need to strike the threaded end or nut.
" rod end " that would be called threading or stud. 🙄
The pickle fork WILL tear up the rubber seal EVERY time. I try flipping the nut first, and hammer it gently without ruining it. It's either for SURR destroy the grease seal, or possibly bung up the threads. Either way, your screwed. Sometimes beating on the upside down but WORKS, and you wont tear up the seal. You have nothing to lose, and everything to gain, if you can get it off by the nut method. Just know when to call it quits before you bung the threads up.
The angle gauge with your phone seems pretty legit. Its the same tech that torque wrenches with built in angle finder use as well. I do agree if your engine builder showed you that, I would want my money back because if they skimp out on buying a good torque wrench/angle gauge, what else did they cheap out on. But if its like, 10pm and this thing has to be running at 7am and you don't have an angle gauge, I see no problem with it.
You'd be better off using a protractor
Most specs are 45 or 90 degrees. Just use a sharpie to put a mark on the bolt and use that to indicate. If you make it 92 or 86 degrees instead of 90, that 'close enough'.
The problem is that sometimes the phone measure may not be accurate enough
@@Seb-Storm the newer iphones angle sensor is accurate enough for this job the hack is true
@@user-hq9tr9sg9s i see. That's what I'm saying is that as long as the phone has a good sensor to properly detect angle then it would be ok
"if it's humble mechanic you don't question it" facts😂
Transmission fluid is amazing for stopping leaks, I've fixed a leaky mechanical diesel injection pump by filling the fuel filter with it and running it through the fuel pump. same thing with a leaky clutch master cylinder, used to have to top it up daily but after filling with transmission fluid it hasn't leaked a drop in years
That first hack works great with the brakes...I just always put the old pad on the piston side to protect it.👍
Yeah, me too. That and me rubber mallet--and we're gooood!
It might be different for german cars but on some of the VWs and Opels I've worked on you had to "thread" that piston back in. Only pushing on it wouldn't work, you'd need rotation as well. We got crafty a few times, pushing the piston in with a big pipe wrench and turning it with a smaller one. I got one of those piston reset toolkits for 30 bucks now and don't mess around anymore.
Keep up the great content Donut watching from Australia
It's too bad they gave tiktok any screen time. The ccp are garbage.
Yay, another Donut fan in Australia!
yep we use coffee filters to clean the glass at my starbucks LOL
10:57 - When I was 13-14 I made a similar mistake on my dad's Volvo 240 GL... I placed the jack on the floor drain plug because it seemed to fit the jack perfectly. Thankfully I only opened it up.
Coffee filter as a wipe seems like a fantastic idea, they are clean and protected for shipping. The angle on torqueing bolts is not great, but is using a 30 year old torque wrench that has never been calibrated any better?
I use coffee filters to clean mating surfaces and cylinder walls, works fantastic. Little bit of ATF and filter is all you need.
I had a craftsman microtork torque wrench that was about 15 years old and had been set to 90 ft-lb for about 10 years. I thought it would definitely be wrong so I bought one of the digital ones that is attached like a socket extension. Surprisingly, the torque wrench was still perfect all across the torque range. And even though I hadn't used it in 10 years, I used it a LOT the first 10 years I had it.
The correct tool is a Torque Angle Gauge. It doesn't matter how worn the torque wrench is: the dial goes between the socket and the wrench. Provided you know what you are doing, it would work fine. BTW: most guys never seem to understand that if you zero a torque wrench EVERY TIME you are done using it, the likelihood of stretching the spring and changing the calibration is almost nullified. NOTHING is worse than finding someone left your torque wrench set on 120 ft-lbs when you have to torque a bolt at 65! Very, VERY frustrating!
@@Av8orDave I like your story but I'm confused about the maths 🤣 how can you use it for 10 years, then barely use it for another 10 years, and then after all the wrench is only 15 years old? 🤔
There's a reason why filtered coffee has less cholesterol than other types of coffee! Coffee filters have great absorbent powers.
That's definitely a new reservoir. It's literally so obvious (no stock resivoir is that clean) 😂
You’re right, it turns yellow from the heat.
Plus the ears the reservoir connects with were white afterwards too, as if the soap cleaned the outside of the reservoir too... Lol.
I enjoyed watching this video so much! And as someone who knows nothing about cars but still saw most fails coming... Common sense also seems to be really handy in the working place 🤣
3:48 Not a problem, I've done this many many times on trucks where the oil cooler seals fail, and it fills the coolant with engine oil. Swapping the cooler seals, filling it back up with straight water and dishwasher detergent and running it like that for an hour or so, drain and repeat once or twice. Then fill it back up with coolant, works a treat.
To be fair, somehow a firestone mechanic switched some wires in my car- It caused an engine light on. And about two thousand or more dollars in trying to fix it. And going to about 4 different places to fix it. The only mechanic I use now is in the middle of nowhere, but they’re honest and they get worked done fast
Those small shops in the middle of nowhere are often the best ones. The only mechanic I ever go to if I can possibly help it is a tiny little shop next to the railroad tracks in a town with 7,000 people in it. I have actually walked in the door in the middle of them telling a customer that yes, they can absolutely replace his transmission if he really wants them to, but the one he has is perfectly fine.
Middle of nowhere guys can't risk being shitheads lol. Word gets around that they're a ripoff, and their paycheck dries up. If they were in a big city, there would always be another sucker.
Love when they bring people in like these mechanics... I feel like they should give them all a little plug at the end tho right????
Yes
I want to know who they are, too!
Angelina is a auto tech at RCC in riverside ca she also taught auto in high school as well she’s really cool
I remember decades ago being stuck trying to get off an old oil filter, so I used some old bailing twine (I think it's called...?) and a short screw driver, twisting it around, back then there was know net, but I had my MacGyver thinking cap on 😊😅😮 "come on Mac, think of something!!!" 5 seasons of that show was AWESOME!!! 👌
Been using transmission fluid and brake fluid to soften leaking seals for 50 years , usually works never caused any damage with 4 to 8 ounces.
As someone who knows very little about car maintenance, I've never been more convinced (I was already up there but anyway) that I should leave all of the whatever to the professionals. I'm sometimes proud of the things I know or the things I can do in life. Whenever I feel like my head is getting a little too big, I lift the hood of my car, look inside, and remind myself that I don't know anything.
The "neutral drop" works great. Honda 3.5 timing belt jobs, removing the 10mm bolts on the covers with a battery ratchet. Do about 3 of them a week and after learning this a year or so ago saves a ton of time and knuckles lol
Please.. stop. I am tired of replacing all the hardware geniuses like yourself scortch
Hello does anyone here believe in Jesus?
That is a dishwasher pod, not a ride pod. Fascinating how running detergent through the engine cleaned the OUTSIDE of the reservoir and didn't ruin the engine....
Two things for that emblem hack. One, new emblems are supposed to come with small silicone sleeves on the prongs- makes it hold better. There are none on that. Two, just wrap a small prybar in painters tape, or use a plastic bar, and it'll pop right off. No damage, easy as pie.
10:30 I’ve added every extension we had once to get the bolts off my sister’s transmission so we could take the engine out. It was like 15 extensions that made it 3-4 feet long. My dad and his friend didn’t think it would work but it totally did and they were so surprised when the bolt broke loose. 😂
Quality tools, so the amount of slack in the system was minimal, and nothing distorted.
@@maltinamaltina2665 no there was mad slack and it was all harbor freight ratchets lol. That’s why we were so surprised. We totally thought it was gonna break something.
I love watching old mechanics on KZhead. They have all the tricks and can save thousands on specialist tools that you might use once.
Paul needs his own KZhead channel. He's fun to listen to.
Everybody on the show could be professional announcers. Shocked by how funny/smart and relaxed they all are. Fantastic group of people!
Dishwasher detergent in coolant reservoir, yes actually. Done that when you get oil in the coolant and have to flush the system out. Just don't leave it in there. Need something that doesn't foam and can cut through oil and grease. Dishwasher detergent by design doesn't lather or foam up. Now, it doesn't clean as well as the video lied about, but yes. I've put detergent in cooling systems before. 15 year diesel mechanic
@@FinalBossMusic depends on how big the coolant system is. We put a couple cups in with a gallon of hot water for a 12 gallon cooling system on trucks. A dishwasher pod is good for the couple gallons in a dishwasher. Tide pod is different.
I use dawn, but was surprised when they all said no I thought more people knew about that.
@@tblosser8921 I use the powder soap. Anything that foams or bubbles may cavitate in the engine and cause hot spots. That and the water pump causing turbulence will form bubbles too.
I've seen someone before do this when they blew the head gasket on a truck they were rescuing and driving home. I'd never heard of having to clean the oil residue out of the coolant system. I'm sure it makes it cool more efficiently, but I've never done this on any vehicles I've done head gasket jobs on and I've never had a bit of trouble with overheating. I think the vid I saw was possibly Vice Grip Garage (sorry if it wasn't you), and I think he did use dish soap to clean the system. They dumped the sudsy/oily water, did a straight water rinse and dump, and filled it back up with coolant and hit the road after all the repairs... Seemed to work OK. Will say using dishwasher detergent makes a LOT more sense due to the non-lathering but still grease cutting qualities.
@@mdemers767 I'm usually doing this on diesels that have the oil cooler fail. That's more typical than a head gasket. It gets a LOT of oil in the system sometimes takes several rounds of soap and water to get it clean. Flush with water a couple times to get all the caustic soap out and then change the coolant reservoir.
So I’m a public transportation mechanic in San Diego county, I can say with great certainty that many of these hacks have been used by mysef and others in my field, we used coffee filters on many rebuilds to clean up some carbon that was left behind and on transmission for removing clutch materials. The belt and boxes end pulley holder is 50/50 as some of our pulleys are held on with more torque so we can’t do that but it does work on automotive for sure!
Post more! 😂10:55
We use liquid automatic dish soap (cascade) for cleaning/flushing cooling systems. learned it for a truck dealership. But that was a new tank, never had one come that clean.
"Forged in truth" is a hackier phrase than I expect from Donut. Otherwise, great stuff.
Its for this thing called fun
@@lukehaney7657 If they had more fun saying it I'd believe that, lol. Maybe they were just toning themselves too much in front of the guests, and that made it awkward instead of fun?
The dish washing tablet to clean cooling system is actually how I was taught to clean oil from your cooling system. Example, oil cooler cracks and fills system with oil, a non foaming detergent is the best way to remove the oil aka dishwashing powder/tablet. That header tank though is BS. It was new
This was a really fun video. Having some guest mechanics in there is a really fun idea.
Dish washer detergent is how we cleaned oil out of the coolant system after oil coolers failed or a really bad headgasket failure. Cascade though not tide pods. It works really well. Soap till clean, then flush with water until clean, then add coolant. You run the truck for 15 minutes at 1500 rpm for each step to get it hot. It doesnt hurt anything and it gets oil out of the system.