KZhead
Автокөліктер мен көлік құралдары

Paint Scuff Removal on your car! Easy!

CVR POV
2024 ж. 4 Мам.
76 771 Рет қаралды
Жүктеу

**Product Links At Bottom Page**
This is a step by step short guide on how to make a professional repair to a common type of bumper damage. This 1 Series BMW had a small scuff to its bumper corner!
Using SMART Repair techniques this video shows you the whole process in less than 15minutes to achieve an excellent finish.
Weather you are looking to change career, are wanting to have a DIY go at your own vehicle, or just interested in the process, this video is will show you exactly what you need to know.
Please comment and hit subscribe. I will be bringing regular videos to this channel! Thanks for watching!
PRODUCT LINKS:
Air Compressor: amzn.to/3kiD2ED
10M Air Line: amzn.to/3nNGCsN
Rotary Polisher: amzn.to/2XC7ilt
Electric Sander: amzn.to/3zjjnJ4
Air Sander: amzn.to/3EvV0vI
Sanding Discs: amzn.to/2XzAWb0
Polishing Pads: amzn.to/3Epa6D0
Fade Out Thinners: amzn.to/3lsfMDC
Sony ZV-1 Camera: amzn.to/3ly7N86
Heavy Duty Tripod: amzn.to/3nEkfG1

Пікірлер

  • Nice work. I too am a smart repair tech. A decent, honest, down to earth video. Viewers wondering what it's all about? This guy nails it. Keep up the good work👍

    @scottbacon2097@scottbacon2097 Жыл бұрын

    • Thanks 👍

      @cvrpov@cvrpov Жыл бұрын

  • Brilliant work. 👍🏻👍🏻👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

    @alancraigie7951@alancraigie79513 жыл бұрын

  • Mate absolutely class love watching how its done ✔

    @srsalloys1995@srsalloys19953 жыл бұрын

    • thanks pal

      @cvrpov@cvrpov3 жыл бұрын

  • Excellent work indeed hell from Phil in Syd great to watch helps a lot.👌

    @Snip59@Snip593 жыл бұрын

    • Cheers

      @cvrpov@cvrpov3 жыл бұрын

  • Wow, great job. Obviously as DIY at home garage we can’t do like what he did as some of the equipment is missing , and admittedly some expertise too. In any case , it’s a great learning tool , will watch again and again until I knew the theory at least while attempting on my wife’s expensive Audi and save a couple of thousand dollars that was asked to fix it ! Thanks for the tutorial video, appreciate you !

    @vyseerx@vyseerx7 ай бұрын

    • Thanks for the feedback

      @cvrpov@cvrpov7 ай бұрын

  • highlight of my day when a notification of a new CVR POV video pops up ;)

    @glitchtheory6609@glitchtheory66093 жыл бұрын

    • Thanks for watching mate im gonna be working on plenty of varied content

      @cvrpov@cvrpov3 жыл бұрын

  • brilliant bud thx for taking the time to make it cheers paul

    @pablo123b@pablo123b2 жыл бұрын

    • Thanks for watching paul

      @cvrpov@cvrpov2 жыл бұрын

  • Great job 👍

    @EscapeTheMatrix......@EscapeTheMatrix......Ай бұрын

  • Great video, where can I get the paint gear products from? Can you provide affiliate links or point me in the right direction, I would love to purchase some, I've heard some great things about them and would love to try them for myself.

    @willwaddington3665@willwaddington36653 жыл бұрын

  • Another great video mate...stay safe from NZ

    @mreightytwenty8709@mreightytwenty87093 жыл бұрын

    • Thanks. Yes you too look after yourself 👍🏼

      @cvrpov@cvrpov3 жыл бұрын

  • Looks great 👍

    @WaynesAdventure@WaynesAdventure6 ай бұрын

  • Your Chanel is mint learning a lot keep these gems coming

    @jimbrown9967@jimbrown9967 Жыл бұрын

    • I will do thanks for watching

      @cvrpov@cvrpov Жыл бұрын

  • Great work. Just a little confused why you back masked around the bumper/headlight edge? What purpose does this have?

    @EG3HC@EG3HC17 күн бұрын

  • Once the laquar was fully cured did you do any buffering?

    @johngresty758@johngresty7583 жыл бұрын

  • Hi, brilliant videos mate. Keep the good work up. Is it water based or solvent paint you are using and can you recommend a good infra red heat light. I use solvents at moment. As I thought waterbase take longer to dry. Thanks

    @gulfrazkhan3372@gulfrazkhan33722 жыл бұрын

    • Solvent based paint. Infra red curing lamp maybe Google that

      @cvrpov@cvrpov2 жыл бұрын

  • Love the videos you make it look easy what mm is ur primer gun setup

    @garystrain7305@garystrain73053 жыл бұрын

    • Think its a 1.3 pal

      @cvrpov@cvrpov3 жыл бұрын

  • Nice love watching your videos what size gun tip do u use

    @peteharrison2404@peteharrison24042 жыл бұрын

    • I usually use either and lph 80 1.2 or a devilbiss sri pro 1.2 for base and a 1.3 gti pro lite for clear

      @cvrpov@cvrpov2 жыл бұрын

  • Great job, good video, where can I buy some of that APC Grime remover?

    @MrUniman609@MrUniman6097 ай бұрын

    • Email info@paintgear.co.uk if your in the uk

      @cvrpov@cvrpov6 ай бұрын

  • How about similat repair on a white pearl? Any differences in the technique/steps??

    @radojas@radojas2 ай бұрын

  • Thankyou 👍

    @crystalawen@crystalawen3 ай бұрын

    • Welcome 👍

      @cvrpov@cvrpov3 ай бұрын

  • Good job

    @bilalahmed2123@bilalahmed212310 ай бұрын

    • Thanks

      @cvrpov@cvrpov10 ай бұрын

  • What about the clear coat blend line? I did my repair in a similar manner and there was transition of the clear coat visible, and it couldn’t be buffed out. Even more, the more I tried polishing the line was more and more visible…

    @jarekmalinowski6176@jarekmalinowski61765 ай бұрын

  • Nice job as always bro but this video kind of a different from other ones like did you before hand polish the blending area before adding the fade out thinners or u only keyed the blending area and spray clear or lacquer into it followed by fade out thinners. Your reply will be appreciated. Thanks

    @yusufnasiru1709@yusufnasiru17092 жыл бұрын

    • I would of polished into the scotch area to make the blend area as normal

      @cvrpov@cvrpov2 жыл бұрын

  • Best 😊

    @legioner9@legioner911 ай бұрын

    • Thanks

      @cvrpov@cvrpov10 ай бұрын

  • Thanks

    @JKargariyan-xl2lj@JKargariyan-xl2lj9 ай бұрын

    • Thanks for watching!

      @cvrpov@cvrpov8 ай бұрын

  • Is that a W300 you use for your 1K primer and if so what tip size have you got in it? Seems ideal for the job when fluid and fan wound in. Cheer and great vid as usual. Keep em coming!👍

    @lewigas290@lewigas2902 жыл бұрын

    • 1.3 mate. Probably a bit too good for a primer gun but it works and it gets some hammer and keeps going. I often wind the fan right in and have it in pistol form which works well too.

      @cvrpov@cvrpov2 жыл бұрын

    • @@cvrpov Thanks for that. Very much appreciated 👍🍺

      @lewigas290@lewigas2902 жыл бұрын

  • Nice job, but wonder this much multi-layer taping is necessary.

    @tanveernaeem1157@tanveernaeem1157Ай бұрын

  • Good work, how do you go about with the paint matches so many times paint will not match ?

    @rihardsnekrasovs@rihardsnekrasovs2 жыл бұрын

    • Some knowledge, blowing into next panel and a bit of luck

      @cvrpov@cvrpov2 жыл бұрын

    • Spray outs too? Colours have different variants. If you are after paint for yourself. Some paint supplier can match your paint using a spectrometer.

      @scottbacon2097@scottbacon2097 Жыл бұрын

  • Nice job mate! What primer are you using has it got a good build? Be handy to know 👍

    @itsjustforebay@itsjustforebay3 жыл бұрын

    • hi mate, it was a 1k ready for use primer on this job but sometimes i use a 2k which offers better build

      @cvrpov@cvrpov3 жыл бұрын

    • @@cvrpov What brand is it mate? I only use 1k cans but find them very clumsy especially when trying to keep the area nice and small 👍 wouldn't mind trying it out. cheers

      @itsjustforebay@itsjustforebay3 жыл бұрын

  • What is the total cost for this small repair and how much time did you need to finish this?

    @anmaghiz1595@anmaghiz15952 ай бұрын

  • How long did it take you to do this repair really good job mate love watching your videos

    @michaelphair7131@michaelphair713111 ай бұрын

    • 2 hours

      @cvrpov@cvrpov11 ай бұрын

    • @@cvrpov thankyou for letting me know 💯

      @michaelphair7131@michaelphair713111 ай бұрын

  • Hi, why did you polish the panel in the beginning? Does this help with the colour match to get the paint back to original unfaded white

    @matthewdavies6722@matthewdavies67222 жыл бұрын

    • Its more to remove scratches, tar and any previous waxes etc

      @cvrpov@cvrpov2 жыл бұрын

  • Hi mate can you tell me. I do similar smart repairs like you. Iam thinking of upgrading to a sri or a pro lite? for clear coat... Iam using a FLG 5 for clears coats now...which i find not to bad...Which one should i go for? I know you use a pro lite? Thanks

    @mreightytwenty8709@mreightytwenty87093 жыл бұрын

    • AFAIK The original Sri pro is now discontinued (pink one). The flg is a good gun but I know a couple of guys who have upgraded to a pro lite and noticed the difference. Its an excellent gun.

      @cvrpov@cvrpov3 жыл бұрын

  • I was wondering when is best to use a adhesion promoter on the repairs ? Before filler ? After filler ? And what part of the repair ? Entire area or just the repaired sanded and filled area ?

    @lockstocky2800@lockstocky2800 Жыл бұрын

    • I dont personally use any adhesion promoter. Usually before you apply the base

      @cvrpov@cvrpov11 ай бұрын

  • Top dog bro 👌

    @daleaxe1030@daleaxe1030 Жыл бұрын

    • Thanks for watching

      @cvrpov@cvrpov Жыл бұрын

  • Incorrect C2 continuity, becase of too much sanding. This is easy to spot in the reflections.

    @ernstwollweberghost2254@ernstwollweberghost225415 күн бұрын

  • how long did you wait to apply the fade out thinner?

    @wilverlima9653@wilverlima96537 ай бұрын

    • Apply immediately after spraying

      @cvrpov@cvrpov7 ай бұрын

  • More Videos.👍👍

    @maikgaede1@maikgaede13 жыл бұрын

    • Working on it man 👍🏼👍🏼👍🏼👍🏼

      @cvrpov@cvrpov3 жыл бұрын

  • How long do you wait from your first taki coat of clear until your second coat?

    @seenbyme6696@seenbyme66963 жыл бұрын

    • Depedns on the time of year but around 2 mins on this video. Wait till the tape around it is tacky to touch

      @cvrpov@cvrpov3 жыл бұрын

  • What size compressor do you use for these jobs?

    @terryorourke1554@terryorourke15542 жыл бұрын

    • 100 litre 3ph belt driven

      @cvrpov@cvrpov2 жыл бұрын

  • Could you achieve a similar blend using rattle cans with this tactic?

    @alexis98559@alexis985592 жыл бұрын

    • Yes

      @cvrpov@cvrpov2 жыл бұрын

    • @@cvrpov Awesome, im going to try this soon on some metallic paint on my car, wish me luck 😬

      @alexis98559@alexis985592 жыл бұрын

  • What are the chances of this pealing over time vs a full bumper respray? Also is it safe to ceramic coat over a repair like this and can that help the longevity of a repair?

    @Mikesg80@Mikesg80 Жыл бұрын

    • These repairs last just as long as any! Ceramic after 4 weeks like any other paint job

      @cvrpov@cvrpov Жыл бұрын

  • wich adhesion promoter do you use?

    @timmythebeast5783@timmythebeast57833 жыл бұрын

    • I've never used any adhesion promoter and I've never had any issues

      @cvrpov@cvrpov3 жыл бұрын

  • can I use airbrush for this jop ? I dont have big compressor and pro. airgun

    @Panzehir1881@Panzehir18812 жыл бұрын

    • Get rattle cans. Air brush will not be a good idea

      @cvrpov@cvrpov2 жыл бұрын

  • Hi which primer and clear coat u use .. thanks

    @qaisernawaz7709@qaisernawaz7709 Жыл бұрын

    • Indasa high build primer and I use diamond clear from express paints (uk)

      @cvrpov@cvrpov Жыл бұрын

  • What spray gun do you use for primer?

    @minkbandem8093@minkbandem80932 жыл бұрын

    • A 1.3 iwata

      @cvrpov@cvrpov2 жыл бұрын

  • What brand of 1k primer do you prefer mate

    @Waxvalet@Waxvalet Жыл бұрын

    • I use one in a bottle pre made from Nationwide smart repair. I just leave it in a dedicated gun and use when needed

      @cvrpov@cvrpov Жыл бұрын

  • can you do a video on a silver car?

    @dostofficial@dostofficial2 жыл бұрын

    • Yes i will at some point. thanks for watching

      @cvrpov@cvrpov2 жыл бұрын

  • Which plastic primer do you use?

    @jonnymbuna@jonnymbuna3 жыл бұрын

    • Its a 1k based primer, ready for use out of the gun

      @cvrpov@cvrpov3 жыл бұрын

  • Do you aapply a 2k clear coat ?

    @willysir8836@willysir88362 ай бұрын

    • Yes

      @cvrpov@cvrpov2 ай бұрын

  • Which compressor you use

    @ceasarnawaz8179@ceasarnawaz81792 жыл бұрын

    • 90 ltr abac belt driven 3hp

      @cvrpov@cvrpov2 жыл бұрын

  • Easy way to repair, use 320 grit then 500. Primer, rub primer with 500. Scotch pad area . Paint n lacquer Dont use material by over useing masking tape and brown paper Dont forget to cover the car otherwise you'll spend hours cleaning the over spray

    @driveryte@driveryte2 жыл бұрын

    • 👍🏼

      @cvrpov@cvrpov2 жыл бұрын

  • Mate which lacquer are you using?

    @ignasvelicka8986@ignasvelicka89863 жыл бұрын

    • Diamond clear express paints

      @cvrpov@cvrpov3 жыл бұрын

    • @@cvrpov 5 mins hardener? Assuming you did the job in January?

      @Balystube@Balystube3 жыл бұрын

  • Wish you was in philly

    @spellbreaker6609@spellbreaker66094 ай бұрын

  • Which areas do you guys cover for repairs?

    @LetRippr@LetRippr3 жыл бұрын

    • Derby, Nottingham, Chesterfield, Mansfield

      @cvrpov@cvrpov3 жыл бұрын

  • How long were the drying times for primer, 1st and 2nd base coats (and did you allow the base coats to dry naturally?). How about after the coats of lacquer too? It’s a shame you didn’t show the wet sanding and polishing stages too. Great video 👍

    @supercarkid7727@supercarkid77273 жыл бұрын

    • Hi mate. I wanted to keep this video quite short. I will be focusing on all these things in other vids. This 1k primer dries under heat gun in around a minute. 1st layer of base dries in a few seconds when blowing with air but leave 3-5 mins between the other coats. This lacquer dries in 10mins under infra red and there's a couple of mins between coats

      @cvrpov@cvrpov3 жыл бұрын

    • CVR POV 👌👍

      @supercarkid7727@supercarkid77273 жыл бұрын

    • 👍🏼

      @cvrpov@cvrpov3 жыл бұрын

  • Is there a concern with the sandpaper hitting the tire?

    @CJLTV@CJLTV Жыл бұрын

    • First time car owner. Been learning a lot from here (:

      @CJLTV@CJLTV Жыл бұрын

    • Try not to hit the tyre

      @cvrpov@cvrpov Жыл бұрын

  • Are you using 2k or water based colour ?

    @darrenparfitt1520@darrenparfitt15203 жыл бұрын

    • solvent....

      @mreightytwenty8709@mreightytwenty87093 жыл бұрын

    • Solvent base, 2k clear

      @cvrpov@cvrpov3 жыл бұрын

  • How much the repair of that type?

    @kimpoyvillanueva6253@kimpoyvillanueva6253 Жыл бұрын

    • 150.00 +

      @cvrpov@cvrpov Жыл бұрын

  • 👍

    @kadiraktas5078@kadiraktas50783 жыл бұрын

    • 🤜🏼🤜🏼

      @cvrpov@cvrpov3 жыл бұрын

  • How much does a repair like this cost?

    @anuppatel624@anuppatel6242 жыл бұрын

    • prices for most repairs of this kind can range from 120.00 to 150.00

      @cvrpov@cvrpov2 жыл бұрын

  • It's great if you have access to a body shop!😂 JK, nice work. I got a paint transfer I have to address...

    @christiand7437@christiand743711 ай бұрын

    • Hope the vid helped in some way

      @cvrpov@cvrpov11 ай бұрын

  • Brilliant 💯👍👍 But music DURING vids would be nicer 😎

    @diamonddetails9445@diamonddetails9445 Жыл бұрын

    • Noted 👍🏻

      @cvrpov@cvrpov Жыл бұрын

  • Let’s see you do that with a metallic🤣

    @gweflj@gweflj6 ай бұрын

  • Pity your not in Sydney.

    @Snip59@Snip593 жыл бұрын

    • Defo

      @cvrpov@cvrpov3 жыл бұрын

  • Good job, but if you have all those tools you're probably a pro anyway so won't need to watch the video.

    @Lotus.F@Lotus.F Жыл бұрын

    • Same methods

      @cvrpov@cvrpov Жыл бұрын

  • Nice job but let's be fair. It's white.

    @paulff3@paulff33 жыл бұрын

    • It is white to be fair

      @cvrpov@cvrpov3 жыл бұрын

  • You have a phone or somthink

    @sahilyas9154@sahilyas91542 жыл бұрын

    • Yes

      @cvrpov@cvrpov2 жыл бұрын

  • Is it so hard to loose the bumper just a little bit?. Then where is the degreaser??. Big fail on that.

    @mecanicageneral615@mecanicageneral6153 жыл бұрын

    • He used a apc degreaser to start with !!!!!!

      @mreightytwenty8709@mreightytwenty87093 жыл бұрын

    • not really logically necessary to remove the bumper and i dont have any problems doing it as in the video. I used polish, apc and also 2 different panel wipes on the repairs. thanks

      @cvrpov@cvrpov3 жыл бұрын
KZhead