How to: Prepare and Paint a Rusty Frame with RustProof MD - 1980 Toyota Pickup Truck
Today I finish stripping the gas tank, suspension and steering from the frame, play with fire, and
finally paint the frame gloss black using a POR15 alternative sold at NAPA called Rust Proof M/D.
More videos of this 1980 project:
Rusty 1980 Toyota Pickup Truck Long Bed(s) Build Intro: • My Rusty 1980 Toyota P...
1980 Toyota Long Bed Rusty Cab Floors: • 1980 Toyota Long Bed R...
More rusty floor repair (shorter version) • How to Fix a Rusty Car...
Cutting & replacing rusty rocker panel: • How to Replace/Fix Roc...
Removing the Cab: • Disassemble & Remove C...
Removing the engine from bare frame: • Toyota 20R Engine Remo...
Toyota 20R Engine Teardown: • Toyota 20R Engine Tear...
Removing the Bed: • How to: Remove the Bed...
Prepare and Paint a Rusty Frame: • How to: Prepare and Pa...
Update Suspension to install Drop Spindles on 1979-83 Toyota Pickup: • How to: Update Suspens...
Installing Steering Components on Toyota Pickup 2WD/RWD: • How to Install All New...
Install Street Edge 3" Lowering Leaf Springs: • How to Install Street ...
How to install Mini C Notch: • How to Install Mini No...
Remove 20R from truck: • How To Remove 20R Engi...
My used OEM Toyota Parts for sale: yota.6thgeargarage.com/
I don't have Patreon or ask for donations, but you can support the channel with some rad 'Yota gear from my store: 6thgeargarage.com/merchandise/
Instagram: 6th_gear
facebook.com/6thGearGarage
Some other Toyota videos you may find helpful:
Remove 1980's Toyota Pickup/4Runner Dash Pad Cover: • How to: Remove 1980's ...
Rebuild Front Knuckles: • How to: Toyota 4x4 Sol...
Restore/Fix/Repair a Cracked Vinyl Dash: • Part 2: How to Restore...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
How to clean/Restore Toyota Pickup/4Runner Door Panels: • How to: Clean/Restore ...
Toyota Door Disassemble: • How To: Disassemble a ...
Rebuild front knuckle & replace birfield joint 80 Series: • Toyota Solid Front Axl...
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Toyota Pickup Fiberglass Bed Review/Comparison: • Toyota Pickup Truck Fi...
How to Properly Repair Rusty Frame: • How to Properly Repair...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
Remove Door Panel: • How to: Remove Toyota ...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
B-Pillar Trim Removal & Install: • Toyota Pickup/4Runner ...
How to disassemble Vent Window: • How to: Disassemble Ve...
F250 guy here! Im about to embark on cleaning and protecting at least the rear frame under bed soon. This was very helpful!
Bit of a random thought, but have you ever considered getting a frame dipped and galvanized? Its common to do here in the UK and will last forever practically.
Sandblasting and powdercoating is more common here, but I don't know of anyone near my area doing galvanizing.
First! The frame looks great and it won't rust any time soon.
brilliant !! how the hell you remember where all that stuff goes is beyond me. thanks for the vid
Haha figuring out where everything goes is part of the reason I make the video! Thanks for watching!
how amazing it would be to be able to do this to my trucks.. love the content man!
Thanks 👍
Honestly love these videos so much, you have the best content on youtube for toyota pickup. Every video makes me want to work on mine and gets me motivated, they're also really informative and I learn so much
Thanks! I just found those brackets I need, so I hope to be back on track with this build soon!
Thanks for the content!
Welcome!
Angle grinder with a cut-off wheel for the spring bolts, I just did mine, the inner sleeve was rusted to the bolt, and they would not come out the way you did yours. Great video. Jim
I had to do it that way on a rusty 1986 frame I scrapped, I think I used a sawzall though. Took forever!
Looking good
Thanks 👍
I coated my frame with eastwoods rust encapsulator. I thought mine was bad because it had light surface rust. We don’t get rust here in Georgia. I wanted it to looks really clean and I think it’s a good product.
Why is your channel so aweome...
It was interesting to see the dismantling of the front end of your project Toyota ute it is similar to my Hilux and new rear springs well a previous owner put new springs in my Hilux because it is GVM is 2700 kilograms and the tare weight is 1200 kilograms my can carry up to 1500 kilograms so it gives a crash ride but l am used to the ride because l was a courier and owned three utes before this one
I know the feeling. My lifted 1985 has very stiff leaf springs. I keep some extra weight in the bed to help soften the ride.
@@6thGearGarage ln N.S.W Australia we have yearly registration inspections and my Hilux has GVM of 2700 kilograms and a tare weight of 1200 kilograms and it has to be able to carry 1500 kilograms so if l even remove one leaf it may fail because the inspector takes it for a drive also with the inspections no emission test so l have to put up with the crash ride it doesn't worry me because l had a few utes with crash rides
This is fantastic, exactly the kind of stuff I want to see. How does this compare to sandblasting to bare metal and powder coating? A lot less expensive I guess, but how does it compare in terms of durability, pretty good? Thanks for sharing!! Edit, I see after I paused to comment that you addressed durability. Looks pretty nice. Thanks again for sharing all this toyota truck 22RE stuff, I simply cant get enough of it from you, love your videos. Thanks.
Thanks!! This is a first for me, so we'll see in the long run. It seems pretty tough though. For the price and being able to do it at home, it was my best choice.
I had my cj7 jeep dipped in galv $.500 .00 glastonbury. Only place in ct. About 8-10 years ago.my fav 4x4 was 1979 totota. First year for 4x4 so dealers sold them fully loaded a.c. tilt amfm the little 20 r had to turn off ac when driving uphill on highway.ha ha.put chrome. Roll bar big lights. Factory graffics etc.beauty.frame had weak leaf spring perches and shock mounts welds would crack.
Love what you doing I have a 85 4wd hilux why you have everything off you should do the inside of the frame will last longer
Thanks! The inside will be fluid filmed once it's all back together
Hey ! Thats the song from project farm haha
Todd has great taste in music!
Awesome video man, Ive got a 1981 Toyota Hilux that im going to rebuild. Just watching you strip that chassis theres a lot of parts, brackets, bolts etc coming off, how are you going to remember where it all goes?
I use ziplock bags and label everything, but sometimes if I'm in a hurry I'll set bolts down in the garage and once that happens a few times in one day I end up with mystery bolts :) Then I have to go back and watch these videos for help!
Hi nice work but confused you plated the blue truck now Ur doing the white truck chassie
The Blue truck had the better cab and the white truck had the nicer frame, so I'm going to make one good truck out of the two bad trucks.
@@6thGearGarage enjoying your video I'm confused why you welded the blue ones frame
@@garyclifton2180 I never welded the frame of the blue truck. I only repaired the cab.
Hope the product was mixed well and not a lot of solids in the bottom of the can.
Good point! I had stirred (not shaken) according to the instructions.
I'm curious, did you also coat the inside of the frame with anything or is it still bare? My fear would be that the exposed rust in the frame would just start eating from the inside out if the inside was left untouched.
Yes I did with fluid film, but wanted to wait until I was done notching/welding the frame so that the welds wouldn't be contaminated. kzhead.info/sun/Zd2qdJGfeIiqhoE/bejne.html Around 5:30 in this video I sprayed the inside with Fluid Film.
@@6thGearGarage makes perfect sense! I'm really enjoying your channel!
LCE is doing a 85' 4x4 cab/bed off rebuild...sent them your info about parts you may have....
I am following this project closely 😂 how do I get in contact with you? I am rebuilding a 94 2wd and I'm not a machenic at all but was inspired by your videos. Would like to share some pictures with you and ask some questions 😊 all the way from Namibia 🇳🇦 in Africa.
Hi, you can contact me through Instagram or Facebook. Links are at the top of my channel page.
I have a 1986 2wd with the 5 lug axle. Is there any disc brake kit for the 5 lug cuz I've had no luck
Your easiest front brake upgrade for your 86 would be to swap 1-ton parts. I showed how to in this video:kzhead.info/sun/ZtZ_Z7ttbHarlIk/bejne.html
Do you guys repair first gen tacoma frames? mine needs some areas patched due to rust. Im in ohio as well
Sorry I just don't have the time to take on any outside projects
Great work an love your content!
Thank you! I just found those brackets I need, so I hope to be back on track with this build soon!
I have those brackets.
you need to sandbas
I would if I had one
sorry, this is faaar from being a rusty frame, it has at most some surface rust that some of it even came off when you pressure washed it
This is surface rust, which is perfect for a rust inhibitor. A crusty/holy frame like most of the other toyotas on the channel aren't worth painting IMO, because the rust will just continue under the paint over time. For something bad, I'd just fluid film annually.