3 THINGS I HATE - Hustler Raptor XD Review - Overview
2024 ж. 26 Сәу.
130 760 Рет қаралды
First look at the brand new Hustler Raptor XD lawn mower. This is my review on the Raptor XD and 3 things that I think could be improved on. The Raptor XD replaced the Raptor SD for the 2021 model year. What's your thoughts? Leave a comment below. This is the model that is replacing the Hustler Raptor SD. Thanks for watching!!
Check out our other Hustler mower videos here - • Hustler Turf
Get your Hustler LED Light Bar Kit here - powerequipmentman.com/collect...
If you got some good value from this video, please consider supporting our channel here - www.paypal.com/donate?hosted_...
#hustlerturf #hustlermower #lawncarelife #lawncare #lawnmower
I expect this mower will last several seasons with decent care. kzhead.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
I'm buying one of these on Saturday. Can't wait. Lots of research went into my decision. I worked for a professional landscape company for 7 years and ran some very expensive commercial equipment. This unit appears to be exactly what I need for residential. Your video just reinforced my decision.
Awesome! Thanks for watching
Just bought my new XD. FYI, my salesman said to remove the floor plate bolt when I got home and to and leave it out. Thanks for the video and tour of the machine.
Great video. To the point and very informative. One of the best I have seen in awhile
Thanks for watching!
I just bought the SD last October I had a big end-of-the-year clearance on him gave $3500 for mine and I’m very happy with it
Sounds like you got a great deal. Thanks for watching!
Thank you so much for the video! This is my first video I ever watched on your channel. I am now (seriously, I am) going to buy one of these today. I wish my equipment dealer knew this much about the machine. Thank you for such a genuine review, it is much appreciated.
Awesome! Thanks for watching
Great video. Smooth, professional production. You did good in your dissertation flowed with pertinent intel. Excellent!
Thanks Max. Just trying to do my part to help out the Hustler community!
@@PowerEquipmentMan Outstanding!
Love mine! Had it for a year
Thanks for watching!
Looking to start a solo-op business in the new year, 2023. The Raptor XD 48” is what I am going for. Thanks for this review, it was helpful!
Glad to help! Thanks for watching
Me too mate. Im looking at a 48" too. Did you go ahead?
Just brought my XD home tonight, I’m pretty excited. I went from a 1998 38” Sabre to this, I ran it around the yard when I got it home. I’m looking forward to using it. Your video sealed the deal for me.
Awesome! I think it will be a great machine for you. Thanks for watching!
@timbermansam Hows it going from the upgrade?
Still Loving my XD. I'm about to change the transmission fluid in mine and this model does not have the expansion tanks so question is everything else is identical to the SD transmission hydraulic fluid / oil change as far as changing the oil itself and purging.. I plan on just removing the oil filters topping the fill holes off with hustler 20w50 transmission oil..purging with engine off then purging again with the engine running..Thanks
I picked up a 21 Raptor XL 42" a few weeks ago. Love it so far.
Awesome. Thanks for watching
Sounds good, does it have the flip up deck for maintaining the blades and keeping the deck clean?
Sounds like a great mower to have, im looking to get one very soon.
thank you, I am now confident the XD will fit my needs
Thanks for watching!
Just bought one and agree with all your points. I do have one place I differ and that’s the traction. I feel like the tires slide a little more than my Super Mini Z did. All in all though I do like it a lot.
Thanks for watching
I checked out a Raptor X at the dealer recently and this video basically sold me. It's essentially the same mower with a couple extra features. One thing I liked about it vs the Dash XD was that the steering levers didn't hit my knees. Appears to be a solid freaking mower. Surprised it's at the price point.
Glad it helped. Thanks for watching!
Just bought this today looking forward to a great experience.... hopefully.
Thanks for watching!
What is everyone's thoughts on the CC ZT2 model and how it stacks up against the XD?
Got a 2015 SD with 750 hours still kickin ass!
Awesome! That's a lot of hours for an SD. Glad its been a good machine for you! Nice work on your videos as well. Thanks for watching!
Just bought one today ,grass got a bit wet from a passing storm ,and still mowed a slope perfect , no mess so mulching quality is good
Great to hear!
Following up I did notice the other day, going down hill there was a bit of resistance turning left , and can be a bit jerky .
Does it have the oil reservoir for zt 2800 hydro gear?
Good honest review
Thanks for watching
Nice review!
Thanks!
I bought a 2020 SD last year..put 140 hours on it so far without issue. The removable deck plate, big bite tires and new height adjustment are all nice upgrades over my model. The tank may not have a fuel level indicator, but the previous design only holds a bit over 2 gallons rather than 3 because air gets trapped in it.
Thanks for watching
@@PowerEquipmentMan I just hit 300 hours. Still mowing strong. I added my own foot operated chute lift that I made. Part of me still wants a full commercial machine, but the hustler is paid for and shows no signs of quitting anything soon.
Love the '23 XL with the torque tube front suspension! It's my Prarie golf course mower!
Thanks for watching!
I like that they went with a solid tube frame. I use to have a 2018 limited that had flex forks and loved how light and nimble it was. I hated the small discharge opening on mine and the cutting speed just wasn't there. These improvements look similar to Max's channel by the way 😉. Are Hustler's still available at Lowe's? It's a great remodel and can see it selling out quick. Great video and enjoyed watching.
I think Hustler did a great job making some huge improvements on these machines. No, Lowe's does not sell Hustlers anymore.
Love my 60 inch cut xd
Great Info!
Thanks for watching!
I just bout a nearly new demo from a dealer a 48 inch commercial fastrak I love how it handles about 8 miles and hr. Never new hustler had a mower that handles so well the deck is strong and built very well
Glad you like it! Thanks for watching
Best home owner zero turn ever made .
They are a great machine!
I have that mower bought it last year love it compared to my 22year old mower lol i bought the upgraded intake and filter from you.
Thanks for your business!
Going to look at one of these today! I used to mow with Hustler Super Z's at work but I can't afford those for my 1.5 acre yard haha.
Awesome! Thanks for watching
@@PowerEquipmentMan brought it home yesterday and man is it an upgrade from my 15 year old beaten down used toro i was mowing with ha. Love it!
Hi sir: I like your review. I have an 17 hustler with only 42 cut. Well affordable is the right word. The only thing i do not like is the discharge port. Too small. Mower is great! I'll take yellow over green any day.
Thanks for watching
I am starting a lawn care business in SE NC and I will be mowing 1acre or less and I am going to have to stay at 44" max on the deck. Do you think I could use this mower for that application or should I move on to something else?
If you are limited on deck size then the XD 42" would be the only option that Hustler would have right now. The XD would handle properties that size just fine but you wouldn't get as many years of use out of it as you would a Fastrak or XONE. If I was in your position, I would buy an XD but just plan on selling it and getting a new one after every 200-300 hours. So that way you can sell it while it still has some good resale value (around here that used machine would sell for $2800+) and you get to stay on a newer machine that hopefully won't have any major issues and keep your cost of maintenance low. Thanks for watching!
So I have about 35 yards I cut a week. None of my yards are larger the half an acre. I currently have a 36'' inch Exmark walk behind but I'm looking at this mower because it comes in a 48'' inch deck and can still access most of my properties just as easy. Basically what I'd like to know is would this be a dependable mower for as many lawns as I have or should I look into a commercial variant instead.
I would suggest looking at the XDX or the Fastrak if you can afford it. They both have 48" deck options well.
Hey when you say the tyres hold the hill well, at what pressure are you running them? I'm not quite happy with mine
Try running them around 6-8 psi. Thanks for watching.
I just picked up my Raptor XD yesterday and can't wait to use it this weekend. This is way overkill for my 1/3rd acre yard but it will turn my 3 hour weekly mow to about 30 minutes! Sadly the prices are much higher than when you posted this video. With the dealer fees included out the door it was just under $6,100 USD for a 42" deck Raptor XD.
It's crazy how much they have gone up in price. 4 years ago, you could buy a Fastrak for $6k. Congratulations on your new mower!
Thanks! 😊
Does the bolt on the removable floor have to stay in? Do you need a tool to remove or just pull up on it ?
That bolt is just put in place for transporting on an open trailer. Once you get it home just remove it. The cover just lifts up, bought a new XD today.
That mower is faster than I can run! I am moving to a 1 acre house but am not intimidated anymore about the yard work if I can use that!
This machine will work great for one acre. Good luck!
In the market for a zero turn went to a local dealer and he showed me a xd and I love the serviceable trans. The price for a 42” is $4700. I’m still on the fence but with 0% financing it’s still tempting.
The financing is a good deal. The XDs still seem to be a good machine for the price. Thanks for watching!
My 42 in Hustler was $3000 in 2020
How do you like the deck adjustment from the previous chain style?
The XD uses the style deck height adjustment that the Raptor SD used for years. You might be talking about the chains they used on the old fastraks. I like the threaded rod adjusters on the SD and XD much better. Thanks for watching
You only can put 1.5 gallons of gas in it. Because the neck goes in the middle of the side of the tank, air can’t get out. Wish you would have mentioned that!!!
I noticed this also. You can only fill the tank up halfway. This isn’t a good design. With my older SD model I could cut my entire five acres & still have fuel left over. With the new XD I have to refill the tank after half the cutting time. The tank is usless.
I saw your comment the other day and today while looking at this mower to buy in the shop I had a close look. There are two tubes coming through the top of the tank and one appears to be a breather/overflow because it leads down to an open end. In that case I would guess the tank should fill completely but maybe at a slower rate once it gets past the neck. I could be completely wrong though. Why else have two tubes?
I think the discharge chute is a BIG improvement, I have a 2020 Big Dog Alpha MP with the 54" deck and I hate the small opening on my deck. I wonder if the 2021 model deck will fit my mower?????
The deck mounts have been changed quite a bit, I don't think it would fit. Just deck shells alone cost around $1000, so probably wouldn't be very cost effective to do.
Do you have the bar going across the bottom of the discharge opening? Some people cut that off. Hustler even has a support bracket you can bolt on, if you do cut it open.
The discharge chute is too stiff, and has no flex. It breaks off too easy if you barely brush it up against anything.
I have a Raptor 60 inch and the hydro belt cam we off the pullyes , dealer put it back on and 6 hours later the belt broke . Taken to a new dealer , hoping for better result.
When was it made? Before 2018 there are issues with broken brackets and bolts holding hydro units.
There is also no slot/hole for towing a garden trailer on the rear of the deck. They sale a “Hitch” kit for $49 that you have to install yourself. The discharge chute is made of a stiffer grade plastic, but while being robust it will not take very much to snap it off whenever you rub it up against something, because it doesn’t flex, or have much give. Mine broke off within the first 10 minutes of operation. Trying to get it replaced, but I’m afraid if it’s the same type of chute it will just do it all over again.
I took my chute off as soon as I got the mower home. No need for it.
do review on xdx 60
Great video. What's your opinion on the XD vs the XDX? Is the XDX worth the extra money? Will you do a review on the XDX?
It all comes down to how many acres you are mowing per week. If you are 3 or less go with the XD. If you are 3-5 acres per week get the Fastrak. I think the XDX is really geared toward the commercial guys that want the heavier hydros and deck but need a smaller machine for small properties. If I can get my hands on an XDX this spring I will definitely do a video on it. Thanks for watching!
Where is the oil reservoir tank located for the hydro gear ZT2800?
The Raptor XD does not have an oil reservoir for the hydros like the Raptor SD did.
@@PowerEquipmentMan without the oil reservoir can it still be easy to add oil to the hydros when it need oil change? And how to do it? Thanks
@@PowerEquipmentMan ok we know there is no hydro oil tank, so how do we change the oil. Fill up through the fill/upper plug. It won't be easy. Is there another way
Has anybody had any issues with tunnel rolls while mowing. Seems like it leaves a hill of cut grass no matter how low or high you mow. Have to go over it again with deck all the way up.
Hi I've asked before about the "sealed hydro", I know they are not sealed and you drain them through the filters but surely it was easier to fill up through reservoir. My question is, where do we fill them now, through the upper plug which would be nearly impossible to get to, and how do you bleed the system now Thank you
If you purchase the Hydro-Gear service kit, it comes with the pump you need to refill the hydros - amzn.to/3xvqS1R Here is a link to the service manual, hydro service procedure starts on page 4-7. documoto.digabit.com/ui/document/737912?q=raptor%20xd&exact=false
@@PowerEquipmentMan yeh thanks for that. just purchased the kit online. Documoto won't let me log in/set up account. I've asked on another of your postings, do I have the bleeder bolt, or in my case filler bolt in or out while purging the drive. Thanks
@@paulstevens5267 Go to www.hustlerturf.com/ Scroll to the bottom of the page and click on "MANUALS" You should not need an account. Enter your model number and then look for "Service Manual". You should have also received this same service manual when you bought your mower. It's got everything you need to know about your mower in there.
@@PowerEquipmentMan Hi, yeh finally got it. No mate I didn't get it from my dealer but got it now lol. Thank you very much for your help/patience. Keep up the good work
Thank you so much, it was very helpful. to be clear there is no reason to take the plug on the side port. And when you bleed it never states to open the system at all? thanks sorry if thats a rookie question, Im new at this
I live in ireland and I have a new xdx and I have the same problem with the fuel tank can not fill it. Only half fill it and the full comes back at you. How can we deal with this. Thanks steven.
Sorry but I have not heard of any fixes for that issue. Thanks for watching.
I actually work at exell on the line that makes these mowers
Awesome. Keep up the good work!
How to mount much kit on 54inch
I've used my Raptor XD twice. It wants to veer to the left. How do I correct this? Thanks. Good video.
I would guess it needs a tracking adjustment. Take it back to your dealer, they should have checked that when it was uncrated.
First check your rear tire pressures. If one is low, it won't drive straight
What is your opinion on Ariens IKON 42 inch vs Hustler Xl 42?
I have not seen a Ikon in person so I can't say too much about them. Just looking at the specs they seem to be very similar to the Raptor X. I would compare warranty and dealer support, but I don't think you can go wrong with Hustler. Thanks for watching!
Got the XD last year in October and loved the performance of the machine. The seat does need some more padding or suspension on it I cannot use the speed capability as it beats you up even on somewhat smooth ground. Now to the dislike Hustler needs to get right with the factory blades they suck. In 15 hours, the lift section of the blades was gone and had to replace them. I know they are expendable items, but I have a 1994 Craftsman rider that I have been mowing the same property with and I replaced the blades 5 years ago and I am still mowing with that mower and those blades, just sharpen them twice a year. Come on Hustler we pay almost $5000, and they won't go past 15 hrs. Now this machine has cut my mowing time in half. The new blades have a lot of lift they are after market and shoot the cuttings a lot farther then the factory ones did. Overall, it is a great mower will get another if I need it. Your video is right on the money thank you.
Thanks for watching!
Still waiting on a XD to come into my local dealer... Thanks About to buy either the XD or the Xl Thanks
Picked the XD up Friday the 28 & Got to mow with it today..And love it..Is the hour meter supposed to stay on all the time? It shows the hours even after you turn the switch off... Man this Xd rides so good with the flex forks added to it
Yes the hours will display all the time. Congrats on the new machine!
@@PowerEquipmentMan Thanks Buddy...Will the Hydro's be simply drain,And fill since there's no Reservoir tanks? How will you go about purging the air on these...Maybe you'll do a video on the first XD that you service... Thanks
@@jimd7241 make it a habit and always remove the key when done. Because if you have the key turned, even with engine off, the meter runs. Such a dumb setup.
The hour meter stays on whether the keys in the switch or not... so I just leave the key in the switch .. yeah the meter should go off with the switch in the off position but kinda a dumb setup like you say
Have you mowed any damp grass with it? If so how is it?
No I did not get a chance to mow wet grass with it. I would always recommend trying to wait for it to dry if possible. Also having a set of high lift blades will help discharge wet grass better.
Just brought my XD home and had to mow wet grass about a foot and a half high. Had to mow twice to get a clean cut but the mower did a great job
Dont mow wet
Thoughts on a Spartan rc?
Sorry I haven't messed with any of the Spartans.
Thinking about getting a raptor x 42" for my 1 acre.
It should be a great machine for you. Thanks for watching!
I was able to get the raptor X 54" for just a few dollars more than the "42
@@jeremysgarage498 I went witha. Scag liberty z for $4500 with the hero discount, I did not like the x, the xd was ok.
@@ikeyeet8312 what was it about the x you didn't like?
@@vicirish74 the transmissions not being serviceable, the tiny rear tires, seemed to be under powered, 3 vs 5 year warranty to name a few.
What size are those rear tires? My 3 year old sd raptor uses a tire that no other mower uses! Very hard to find
Not sure what size deck you have but this is the tire for the SD with a 54" or 60" - amzn.to/35Xpx5a You should be able to find those Grassmaster tires anywhere (online or your local dealer can get them). The new XD tires have not been getting very good reviews due to traction issues. The XD tires are also Hustler ONLY so you can only get them from a Hustler dealer.
@@PowerEquipmentMan oh I have bought a couple grassmasters from a seller on Ebay. You sure can't find them locally though
I actually like less resistance on the levers. I want them more responsive, and when your on the machine day after day its less tiresome.
I problem I have with less resistance is while mowing rough ground it makes the steering a lot more jerky. When you have more resistance your not moving the levers around as much while you are bouncing around. Thanks for watching
Easy fixed. Instead of holding the lever at the top just control it at the bottom. Easy as ...
SOLD!
Awesome! Thanks for watching
Serviceable hydros? I thought the newer models were sealed? There is no overflow for the hydros.
They do not have an overflow, but they do have a spin on filter and you can change the oil.
@@PowerEquipmentMan how
One other thing I didn't like is them not including the reservoir for the hydrostats. Just makes servicing a little more of a hassle.
Agreed! Thanks for watching!
I bought the Raptor XD a week and a half ago and accidentally bumped the plastic grass flap against a power pole, not hard and it ripped it off. I was able to put it back on but now if it touches anything off it pops. Any suggestion on how to keep it. I mean even some taller weeds on the property line will pop it back off.
I had the same problem after just 10 minutes of use. It is made of too ridged a plastic, and the small holes where it slides through the spring holder are too thin. I put mine back own, told my dealer, and then I fixed a buggy cord to it so that I could pull it up when I got near something. First time I barely brushed up against something it came off again. I didn’t put it back on, and am now trying to find a fix for this. If you find one lets us know??
Update: Hustler wouldn’t warrant the grass shoot that busted off at the first glancing contact with anything. I bought a new one for nearly $50, but before it came in I used pipe clamps, and a drimmel tool to cut holes for the clamps, and secured it back in place. It’s not coming off now, but Hustler should consider replacing the type of material the shoot is made of, go back to using the old style, or secure it better like I did.
I have those Big Bite tires on my Raptor SDX. They skid and spin. On dry grass they will skid, especially when trying to stop or slow one wheel. And trying to back up with one tire, forget it.
Good info. Thanks for watching
I swapped my XD Big Byte tyres for ATV Bi-directional tyres ... so much better.
@@keithemery3866 I'm getting some ATV tires for it. They're an od dsize so possibilities are limited.
@@dennisdunne588 I went for Duro Excavator AT22x8-10, so much better. I still get some damage if I change direction quickly on soft ground, but would be a least 80% better ..
Hustler has an edge on the other manufacturers out there by offering a Kawasaki standard on all but the most inexpensive dash. Toro is using their Chinese clone engine and Deere offers only Briggs and Stratton on their base zero turn series.
Yes I am a firm believer in the Kawasaki engine line. I hope that Hustler continues to use them for years to come. Thanks for watching.
I know these are marketed as residential mowers, but I have run my lawn business on a 2016 Raptor for the last 5 seasons. I cut 100 yards a month with it and it's just now to where I need to replace it. If you're buying a Raptor for home use, it'll last you the rest of your life.
Thanks for watching
Would this be ok for a start up mowing business?
It really depends on what your plans are. If you are just a solo guy mowing 10 to 20 small lawns a week as a side hustle, it would probably be fine to get you by for 3 to 5 years. If you plan on hiring employees and mowing 8+ hours a day and/or large properties, it will be trashed in no time (employees are hard on stuff!).
@@PowerEquipmentMan thanks for that. I'll just be starting off solo for now
You people got lucky. My Raptor XD 60in has just hit the 22.3 hour mark and is down for the third time. Battery only started the mower 2 times before it was replaced. As soon as I got the mower home the cylinoid was bad. Luckily the guy that delivered it was not out of the yard yet so he took it back with him. Now the hangers are broken on the back of the deck. One side the bolt is broken and the other side is laying on the deck and no parts are above it to hang it on. The bolts or rods what ever they are called just can't take the abuse of the heavy deck bouncing on them. Or is it just that i got a bad part like the battery. Battery being bad probably caused the cylinoid failure. One bolt being bad or just the nut coming off could have caused the other side to break or disconnect. No matter the problem three breakdowns in less than 25 hours is pretty damn bad.
Mine started leaking fuel after 12 hrs. The deal said it is normal for some leakage and won't fix it.
Leaking fuel is definitely NOT normal. If the fuel tank was overfilled and it is just leaking from the vent tube, then thats not an issue. But if you have any other leaks they need to be fixed ASAP as that would be a huge fire danger. The issue may be if it is leaking from the carb, there is a good chance that warranty will not cover it. Anything to due with the carb or fuel issues warranty doesn't normally cover. So your dealer will likely just have to eat the cost to repair it, but that is part of doing business. If they won't fix it, find another dealer that will. Good luck!
Are these Xd's pitched to the rear instead of being pitched to the front
Not that I am aware of.
@@PowerEquipmentMan Hey buddy would you do me a big favor sometime. I'm not sure if mine is mowing funny or not is there any way on either side on your deck hangers would you count the thread's on the hangers showing above the lock nuts on one side front and back? That way I can see if mine is matched up with factory adjustments..... .Thanks
I purchased a brand new Hustler XD Raptor 60" last year about this time. It recently wouldn't start back up. I reached out to Hustler both by phone (left a message after no one answered) and a "contact us" feature on the website. I got a response finally about 2 weeks later via email. It basically gave me no support and referred me back to the dealer. I learned from my dealer, that Hustler sold out to BLACK AND DECKER and wiped out the entire staff. They are now HORRIBLE to work with about getting any warranty or support. I would NOT buy this brand again. I wanted a local Kansas based US based company that would stand behind their product. That's exactly what I did not get. Now I'm stuck. Hopefully it doesn't give me more issues.
If you have an issue with your machine, CALL YOUR DEALER! It is not Hustler's job to fix your machine, it's your dealer's. That's why they have dealers. If Hustler needs to be contacted about an issue, your dealer will contact them, not you. I don't understand why people even try to call Hustler. If your truck breaks down, do you call Ford to come fix it? No, you call your dealership.
I have the opportunity to buy a used raptor SD for 2800 with 290 hrs. Would you recommend it.
Sounds like a decent deal. You should find out what year it is and watch this video - kzhead.info/sun/fpd9qrJ5bJlmdXk/bejne.html
@@PowerEquipmentMan it’s a 2016
@@PowerEquipmentMan thanks that video helped a lot . I think I’ll hold for a newer model
That seat what so that we would go ahead and butly the upgraded seat! Which I did!
The one thing that I think is garbage is the down sized battery. I’ve seen a lot of changes with Hustler and that battery on the Raptor XD sucks
I know it is a lot smaller battery but since it is brand new I don't have any info on how they are actually holding up compared to the old style battery. They are supposed to be better, but only time will tell. If they become an issue, I am confident Hustler will make changes as needed.
@@Wontreplyeverdontbother I did not know that. Thank you for the update. I just wish Hustler would've told us that they were changing the battery
The battery on the xdx is the same.
What about the fact that the transaxles are sealed. I think thats going to be a flaw
The XD has serviceable hydros, so not sure what you mean by sealed? They don't have a reservoir anymore, but I don't think that is going to affect the performance of them at all.
@@PowerEquipmentMan yeah i meant reservoir, sorry for the confusion
Mid $4000's?! Was just at the dealer up here in Canada, it costs $6900 plus tax for a 60" Raptor
It's priced in USD
@@randallewing5926 oh I know.. but eve with the exchange rate it's still wayyy more money up here!
Unfortunately the tank is viewed half empty!
I’ve got a new 60” and have been pretty disappointed by a few things. It’s had to go back to the dealership 3 times for various issues, the last being a starting issue. Not having any way to tow anything from the factory was another dissatisfaction. I can already see the arms wearing out at only 7 hours of use and can tell this mower isn’t as well built as it should be. My property doesn’t even have rough ground or any steep areas for it to have wear and failures of this nature. It’s doubtful I’ll buy Hustler again.
You have to buy a hitch kit. Cost me $49
@@lawrencewhitmire6740 that thing would come apart if I put a hitch on it and did the things that I’d like to do with it.
I seriously doubt that. I put one on mine, and it’s a very stout set up. It’s a heck of a lot stronger then the old hole that was punched into the thin frame of my older SD. I can now tow anything I can hook up to it. My wife’s wood wagon holds 1700lbs, and the Hustler SD hauls it like it isn’t even there. My lawn roller filled with water is going to wear out before the hitch will.
@@lawrencewhitmire6740, you can report back here in a few years and we’ll see about that. I see so many things on it that are built really chintzy, so, I’m quite sure that doing any serious towing would cause a break down in no time.
what did u do to it.u mowing over rocks or something.sounds like u need a super z
You said serviceability has improved...Is the drive belt still a p.i.t.a. to replace?
I haven't had to replace a drive belt on an XD yet, but they look pretty easy to do.
@@PowerEquipmentMan With the SD, as I am sure you know, the drive belt was entirely under the engine so you had to lift the mower, remove the deck belt (and it's tension spring to do that) and route the belt up,over and around in some very tight quarters. The tensions springs were also very difficult to get back on, at least for an average guy homeowner needing to replace drive belts every other season. Anyhow, thanks for the great video and for following up!
How much is it?
Talk to your local dealer for a current price.
After working for a service center for many years... you couldnt pay me to own a raptor or raptor flip up or raptor hd or any of the raptors. ive seen and delt with way to many problems and on that note the kohler i will never own one unless given one and at that point (i have and gave photos/videos for proof) id swap it for a briggs.
I have a thousand hours on my kohler cub cadet ltx1050 with zero issues.
@@GripItNRipIt82 Do you have the 7000 series or the courage?
Whats the price
You will have to check with your local dealer.
Did you even watch the video? Lazy comments like this 🤦🏻♂️
I dont know where your from, but, my local dealer does not stand behind hustler.
Sorry to hear that. We are in Kansas about an hour from where Hustlers are built. You can find a Hustler dealer in almost every town around here.
Brackets to weak and cracked Owell 😊
I have not heard of any bracket breaking issues on the new XD models.
The lawn mower looks small??
I would say its the same size as any other mower in this class.
Does the music need to be so loud ?? I am impressed by the changes but I still think they could've designed it a bit better. Lazy engineering I reckon. No fuel gauge and not even a sight hole is ridiculous. I don't think there is such a thing as the perfect mower and there is no way I'd pay for the over priced ones either just to get a fuel gauge. You think the aluminium spindles are ok ? Why don't they use the cast iron spindles seeing they are trying to sell what is regarded as a stout, built like a tank mower. It is still lacking any several departments in my opinion.
A lot of what you referring to just comes down to cost of production. Could the Raptor XD come standard with a fuel gauge and cast iron spindles? Yes, but it would sell for $500 more than what it does now. How many customers would be willing to pay $500 more just for those features? 90% of homeowners would rather just get Raptor XD without the extra features and save $500. I think these machines are very well built/designed for the purpose and size property they are meant to maintain. My brother is a design engineer for Hustler and I can tell you they spend years working on these designs to make them work properly and hold up to long term abuse while still trying to keep cost in mind, there is no such thing as being "lazy" at Hustler. Thanks for watching!
Fuel tank is way too small. Wish they went with a 5-7 gallon
I think Hustler looks at it as this mower is rated for up to 3 acres and 3 gallons is plenty of fuel to mow that much. So if you have a full tank when you start mowing and you have to stop to fill up again, YOU NEED A BIGGER MOWER!
I honestly have to disagree. There are plenty of competition that offers a much larger tank size. Honestly, I don't get 3 acres out of a tank. Close but more like 2.25-2.5 before a refuel is needed. I always go back and refuel when I'm half done so I don't run out....again. it's not a deal killer, great mower and I love it. Just some feedback.
I’ve had the Raptor XD 48in for 3 weeks now it’s my first zero turn..so far I’m completely satisfied with the mower..would like to see fuel gauge with hour meter controls and maybe a more easily adjustable seat..besides unbolting and moving it..
@@PowerEquipmentMan 3 Gals is barely enough to do 3 acres, and that's if you hussle. My front yards 3 acres can do in 3 gals, but the back 3 takes more than 3 - have to go slower. Really need a bigger tank.
I been mowing with a 2015 SD for 5 years.I can mow all day long with a full tank.I bring a 5 gallon can with me and top it off on busy days..not a big deal at all lol.
I had the Hustler Sport model from 2012 and just upgraded to the Raptor 48 XD. I consulted your video before my purchase- I found it useful. But after watching the video it's clear the title is completely misleading. You say the mower is "sharp looking." The ports on the belt covers are "very nice." The frame is "super strong." The removable floor pan is "really nice." You love the engine. Serviceability is a "piece of cake." Overall you are "really impressed" with this model. And despite some admittedly very minor gripes, you say it is the "best mower in it's price range." So your title should be something like "New Raptor XD Loaded With Great Features!" I look forward to many hours on the lawn with my Raptor XD.
Glad you went with the new XD! The title is all about views, with a title like that more people will click to see what I don't like but then learn that they are really a great machine. The 3 issues I mentioned in the video are issues that I feel should be addressed by Hustler, but aren't deal breakers. Also I know that most of the upper management staff at Excel have already watched this video and are taking the feedback into consideration. Excel is a great company that actually listens to what their customers want. Thanks for your comment and your new Hustler purchase!
Im using it for 30 yards a week. Lol
$8900 Aus a tad too much for a residential ride on mower.
What 3 things do you "hate"? Swill.
Loose steering, seat, no sight gauge for fuel tank.
Really appreciate the 1st hand honest review! However the crap'tastic muzak needs to go away, far-far away! Please?!?!
This was one of our first videos and we learned quickly that people don't care for music and montages, needless to say we don't do those anymore. Thanks for watching!
I have a 54" and I guarantee I will never by another one! Absolutely the worst mower I ever owned.
Most of these lawn mowers are turned into Lawn Care service. And they need to put a better gas tank. And they need to quit being cheap on crap that's a lot of money. For a hustler or any mower. Get there trying to be cheap why don't you just cut out the middleman. I just let you order directly from them. So you don't have to get the big giant markup.
Thanks for watching
The is the worst Zturn mower I have ever had
It’s no Scag, but the colours are nice
Thanks for watching
I HATE THE PLASTIC FENDERS!!!!