KZhead

Making Slotting Machine

Workshop From Scratch
2023 ж. 15 Қар.
1 206 460 Рет қаралды
Жүктеу

I have always had a problem with wedge grooves, so I decided to build a machine that would solve this problem. I used two gear motors for construction, one for attaching the chuck to the lathe, the other for the drive.
The machine works great, although it still requires a few corrections, but it handles wedge grooves very well
Start supporting this channel and you will get these bonuses:
/ @workshopfromscratch

Пікірлер

  • I am sure it took you longer to build this machine than merely hand filling a groove. However, now you have a excellent machine to do other grooves and splines on outside or inside situations... Thumbs Up!

    @garymucher4082@garymucher40825 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

    • No, it was the same amount of time for it was way more fun than the pesky hand file! Nice machine!

      @johna7661@johna76615 ай бұрын

    • but now he never has to file again ^^

      @Destros2ndone@Destros2ndone5 ай бұрын

  • Very nice work! I truly appreciate your drive to build machines!

    @thomasstover6272@thomasstover62724 ай бұрын

  • I think you and your friend at made in Poland are having a friendly competition. Did you see his "Over engineered spray can shaker" 😱😵‍💫🤣 Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦

    @yeagerxp@yeagerxp5 ай бұрын

  • In Germany we call it Stoßmaschine. Well done, this Machine works nice

    @Orgelfan62@Orgelfan623 ай бұрын

  • Undoubtedly, the master craftsman had reinvented the wheel . Thanks

    @Uswesi1527@Uswesi15275 ай бұрын

  • Perfect ! - Well done - Very, very useful machine which is similar to a shaping machine - I think I need to build a key way cutting machine like yours ! - Love it ! ❤

    @BITTYBOY121@BITTYBOY1214 ай бұрын

  • That was a great build nice machine will come in handy wish I would have seen this 50 years ago great job

    @raysimon1368@raysimon13685 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Cool stuff! I'm sure the wife would appreciate the machine in a slightly different configuration too!

    @MattPlaysRs@MattPlaysRs3 ай бұрын

  • This guy is really good. I would like to see him build a crank shaft balancer for V8 engine since it doesn't seem anyone else has done it.

    @rickyshuptrine2831@rickyshuptrine28315 ай бұрын

  • That took some time to engineer and source parts for. Personally, a set of keyway broaches would have been more practical, but not as interesting as building this shaper. 👍

    @opendstudio7141@opendstudio71415 ай бұрын

  • Very good fabrication skills. I have a shaper but would like a vertical slotting machine, you have given me some useful ideas. Thank You

    @charleskutrufis9612@charleskutrufis961214 күн бұрын

  • 👍👍👍👍 You are really more than wonderful Innovative, smart, and your ideas are organized But what attracts me the most is the equipment and machinery in the factory I wish I had one like it one day

    @hanyhashem6040@hanyhashem60404 ай бұрын

    • Po❤

      @MirosawJedrzejewski@MirosawJedrzejewskiАй бұрын

  • My wife wants one of these, no idea why... She doesn't even do metalwork.

    @damojfowler@damojfowler5 ай бұрын

    • 😂😂😂

      @nikhasmadi3314@nikhasmadi33144 ай бұрын

    • 😮😮😮😂😂😂😂

      @fashachannellove@fashachannellove4 ай бұрын

    • She can buy THAT kind of machine, it is more gentel and doesnt cut anything...

      @ztyy8185@ztyy81854 ай бұрын

    • ​@@nikhasmadi3314😅😅

      @emekodo@emekodo4 ай бұрын

    • 😂😂😂 👏👏👏👍

      @VitaliiLuhovskii@VitaliiLuhovskii4 ай бұрын

  • Невозможно читать пошлые комментарии!!! А станок получился очень аккуратный и отличного справляется с поставленной задачей!

    @user-pd7iu6fl8j@user-pd7iu6fl8j2 ай бұрын

  • Great project. Thank you for sharing.

    @henrykleyn3423@henrykleyn34234 ай бұрын

  • Impressive work bud... I bet all that steel and kit to build it wasnt cheap... great if you have lots of splines and slots to cut.

    @stevew3226@stevew32264 ай бұрын

  • You should stop while I still have enough time and energy. I'll end up in the shop all night trying to duplicate this thing and won't get anything else done.. Great work!

    @rascalwind@rascalwind5 ай бұрын

  • Excellent substitute for a shaping machine if you have lots of keyways or splines to cut.

    @Tuckaway@Tuckaway5 ай бұрын

  • It was so fun watching you work 👏

    @dogukan4093@dogukan40934 ай бұрын

  • Nicely done! I need to build one!

    @WildmanTech@WildmanTech4 ай бұрын

  • @17:30 the pumpings is so amazing that it needs multiple scenes to feel the excitement.

    @mrgod5139@mrgod5139Ай бұрын

  • Fantastic work, dude! Really amazing machine!!! 😃 Stay safe there with your family! 🖖😊

    @MCsCreations@MCsCreations5 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Epic fab skills! And respect to anyone with a jig bore.

    @hersch_tool@hersch_tool5 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Nice and simple. Great job!

    @GBWM_CNC@GBWM_CNC5 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

    • Muito bom trabalho , para ajudar fazer o serviço de corte faz uma maquina de serra fita bancada na vertical , invés de você usar o policorte , te garanto que o serviço te renderia muito mais.

      @erikbraguim4288@erikbraguim42885 ай бұрын

  • Your industrial, planning, design, execution skills are extreemly valuable. I am wondering what kind positions the world value your skills in ? My opinion is somewhere very high in the industrial world, even the inventor level CONGRATS. you can create ppretty much what you put your head to. I will definitly follow your channel.

    @LeutTwostars@LeutTwostars3 ай бұрын

  • That looks totally wicked Awesome bro

    @joshtheis69@joshtheis695 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Шпоночный паз можно легко сделать на токарном, а это рукоблудие для того, чтобы потешить самолюбие.

    @user-ho2oo1ec2b@user-ho2oo1ec2b4 ай бұрын

  • Magnifico progetto amicone miooooo😍😍😍 Onorato di imparare da te. Sei un vero MAESTRO

    @francesco_maggio@francesco_maggio5 ай бұрын

    • Grazie 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Well done and a 👍as always. With any new design/build, it's likely you'd make small changes after a time of testing and use. If you do make changes with this or any other project, a video of you pointing out those changes as you address them would be great additions to your other channel-Infinity Garage. Just a thought. God bless.

    @DanKoning777@DanKoning7775 ай бұрын

    • Thank you 😁 I plan to add such videos to my second channel 😀 Regards

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • You always make it look so effortless…. Great job!

    @markmccain1474@markmccain14745 ай бұрын

    • There is always some effort, but I try to show the work in a way that encourages others to build similar machine 😀 Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Столько времени, сил и материала, для изготовления такого оборудования, рационально лишь в том случае, если изготовление пазов под шпонку необходимо по несколько раз в день😮

    @user-jl1qg5lp2x@user-jl1qg5lp2x5 ай бұрын

    • Точно, тем более что при расточке внутренних шлицов расстояние придется " на глаз" подгонять измерительных приспособлений не предусмотрено. Готовый станок думаю не сильно дороже бы обошёлся

      @Az_gamer_6688@Az_gamer_66883 ай бұрын

  • Good job mister beautifully made well done

    @vinceianni4026@vinceianni40265 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • I praca staje się łatwiejsza😊 Good job

    @madeingarage7040@madeingarage70405 ай бұрын

    • Dziękuje 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Very nice machine. The sort of machine that I would build he he, although I have not have much of that sort of content yet. Good job

    @RustyInventions-wz6ir@RustyInventions-wz6ir5 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • я старый моряк дальнего плавания. в моё время не на всех судах были станки для подобных работ. я учился у специалистов, которые в войну перегоняли пароходы из америки. шпонпаз подобный этому мы делали при помощи ножовочного станка и крейсмеселя. много времени не требовалось.

    @user-vm8sb7nh2c@user-vm8sb7nh2c5 ай бұрын

  • Ciekawy sprzęt i ładne wykonanie 😎

    @arturlend2297@arturlend22975 ай бұрын

    • Dziękuje 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Master man ship 👍 but caption was not right you did made 90% home made other 10 is not you made buy your self 😂 like motor and other main part I don't know the name of that thing which keep holding things in center , but over all I really love to watch your master work its very clean and show your class , keep going and or spreading knowledge to this world , more to come GOD BLESS YOU 🙏

    @thefalconace@thefalconace4 ай бұрын

  • Ło Panie! Konstrukcja jak z fabryki! RESPEKT MISTRZU :)

    @erpu812@erpu8125 ай бұрын

    • Dziękuje 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • the painted seals on the worm box will harden the seals prematurely and cause oil leaks, might want to change them out.

    @Krzys_D@Krzys_D4 ай бұрын

  • I come from Vietnam hello. You share many beautiful and useful products. I would like to have a specific drawing of the lift table. Thank you ☕👍

    @nguyenhuuvinh8083@nguyenhuuvinh80834 ай бұрын

  • Hermoso trabajo. Increíble. Sos un obrero totalmente calificado y cualificado. Me sorprende los detalles que, pudiendo hacerlo simple, lo haces con gran excelencia, como las manijas de avance. Realmente es muy satisfactorio verte trabajar. No tengo el dinero para unirme. Pero me suscribo y pongo like. Te mando un gran abrazo desde Argentina.

    @lucasmunoz1272@lucasmunoz1272Ай бұрын

  • Great footage 👏

    @x5or@x5or3 ай бұрын

  • You should add a clapper to the cutter and face it downward, like a shaper!

    @SeanHodgins@SeanHodgins5 ай бұрын

  • you are sharper than a sewing needle !

    @olens.6987@olens.69875 ай бұрын

  • Il y en a qui sont doués, BRAVOS.

    @jeanfelixcastagne4624@jeanfelixcastagne46244 ай бұрын

  • I think all machinists make miracles....😁

    @VitNg-vl9ek@VitNg-vl9ek3 ай бұрын

  • Wow! A bit overkill I should think (3 phase power no less!), but better overbuilt than under built I suppose. Nice job!

    @hu5116@hu51165 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Świetna maszynka! Super robota!

    @StillOnSteel@StillOnSteel5 ай бұрын

    • Dziękuje 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • I'm thinking you could add gear cutting to this, even for small gears it would be useful.

    @dav1dbone@dav1dbone5 ай бұрын

    • Yes, an Indexing/dividing attachment could well be added if he wants to cut gears...

      @BITTYBOY121@BITTYBOY1214 ай бұрын

  • This is an amazing machine, superior fabrication skills as always! Forgive me, but I dont understand how it works. Does the cutting bit have to move deeper and deeper into the groove as it cuts? This is well above my abilities of what I might ever do, so maybe it doesnt matter if I dont understand, but I definitely enjoyed watching. I know it is impossible for you to make this many videos, but I would happily watch 3 hours of your videos every week. Thanks for sharing!!!

    @tedbastwock3810@tedbastwock38105 ай бұрын

    • if you look at 16:57 the complete view of the machine, you'll see a handle on the right side. When you turn that, the cutting tool (and everything else) will move "to the left", making the cut deeper.

      @jorgeconcheyro@jorgeconcheyro5 ай бұрын

    • @@jorgeconcheyroAh, makes sense, thanks!

      @tedbastwock3810@tedbastwock38105 ай бұрын

  • Hi, but what happened to the video of the wheelbarrow with motor that you then made with the hydraulic skip? It's no longer on the channel

    @OGeki@OGeki5 ай бұрын

    • An offer to mass produce? A problem with a component or design problem that didn't come up till some use? I don't know if I could ever make such a thing but a power wagon would be nice and not have to pay for some big brand one, I remember the drive axle stood out, looked familiar like from a zero turn mower or something.

      @Sryously@Sryously5 ай бұрын

    • @@Sryously Non mi sono spiegato mi stavo riferendo a un video che hai realizzato anni fa tu, non so come definirla ricordo che hai fatto la parte due dove rendevi il cassone idraulico, ricordo che hai utilizzato il volante della fiat 600

      @OGeki@OGeki5 ай бұрын

  • Great job. Thank bro!!

    @BaboonTV2@BaboonTV22 ай бұрын

  • Luksior👍 też o czymś takim myślałem

    @pawekowalski7469@pawekowalski74695 ай бұрын

  • Well done!

    @EdwardRoss-tb5hz@EdwardRoss-tb5hz5 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Excellent job 👍

    @screwsnutsandbolts@screwsnutsandbolts5 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

    • You're welcome !@@WorkshopFromScratch

      @screwsnutsandbolts@screwsnutsandbolts5 ай бұрын

  • Excelente trabajo.

    @saadyzuleyman7138@saadyzuleyman71383 ай бұрын

  • Very interesting build, Well Done. But why the horrible grunching noise at 16:53 when the speed reduction box output wheel goes through 8 and 10 o'clock, is there something wrong inside or is something interfering? It only makes this noise on the forward to reverse changeover stroke, ie when the tool bar is the most extended, there is no noise when it goes from reverse to forward ie when the tool bar is least extended and it not cutting anything yet.

    @bobswrigles8636@bobswrigles86365 ай бұрын

  • Es muy bueno el trabajo tenes un montón de máquinas para hacer, muchisimas cosas. Lo único que me dolió es como usaste el calibre para trazar.. 😣

    @javierclemente2420@javierclemente24203 ай бұрын

  • Excelente trabalho 👋👋👋👋👋👋👋👋🇧🇷

    @Kekihavelhinho7444@Kekihavelhinho74443 ай бұрын

  • You make mini lath M/C too.very simple key hole M/C Love from INDIA.

    @mahendragadhavi6811@mahendragadhavi68113 ай бұрын

  • Very nice build...but the major disadvantage is that the tool has no guiding in the bore hole. So it will be pushed away, that's why you can only make veeeery little steps. In a worst case, the cutting tool might jam on the flange and break or bend or something breaks. Why not use standard reaming tools with just an x movement of the support?

    @Dirksechzehn@Dirksechzehn24 күн бұрын

  • From the title i thought he want to build a slot machine (casino) 😂😂😂

    @mohdeffendi1899@mohdeffendi18992 ай бұрын

  • Inteligente demais!

    @ewertonlimamacedo8310@ewertonlimamacedo83104 ай бұрын

  • Crazy genius!!!

    @DesmoGabe@DesmoGabe3 ай бұрын

  • That's a great job ! Is the internal tube made of brass?

    @SaroCata86@SaroCata864 ай бұрын

    • Yes, That is a brass bearing/bushing he has gone for in order to give his machine better long term durability and get his machine to run smoothly... as brass and copper are excellent bearing material for reciprocating/stroke actions.

      @BITTYBOY121@BITTYBOY1214 ай бұрын

  • Skillset is phenomenal. However, I would never make such a machine while I can buy a broaching set for a 200 $ installed on a handpress that is for sure more efficient than this machine. Great content btw.

    @afshinzamani9305@afshinzamani93055 ай бұрын

    • He makes money as a KZhead content creator. This video will make money, and he can always use the parts on another project if he wants

      @yeagerxp@yeagerxp5 ай бұрын

  • You have to be the only person in the world that uses a MOORE jig grinder as a drill press.

    @gwharton68@gwharton685 ай бұрын

    • Świetnie sprawdza się jako wiertarka, nie wiedziałam, że ma inne funkcje 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • very good project and very useful !!! well done

    @fly3209@fly3209Ай бұрын

  • Wow so amazing,i love it

    @protuslumbasi9356@protuslumbasi93564 ай бұрын

  • Awesome Design & Build What Brand are your Countersinks? Those are the Best looking Countersinks I’ve ever seen for Metal Work.

    @phillipchambers8487@phillipchambers8487Ай бұрын

  • nice bild ! cheers ben.

    @be007@be0075 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • How are the two ends set to be level along the center axis?? The chuck holding the piece and the boss holding the piston.. I watched the video twice and didn't notice how you set up them level... nice work as always though

    @hyper_active_snail@hyper_active_snailАй бұрын

    • 15:36 there are slotted holes for height adjustment of the reduction gearbox. Same for the other axis. I wonder why he didn't add a pawl/ratchet mechanism, like a real shaper does.

      @ulbed@ulbed27 күн бұрын

  • Ottimo lavoro, ciao👏💪👍

    @andrea.S..@andrea.S..5 ай бұрын

    • Grazie 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • Good work 👍

    @ranjitsian5481@ranjitsian54813 ай бұрын

  • *Very nice job* 👍👍👍

    @MedSou@MedSou3 ай бұрын

  • The stroking shaft, is that reversible, or the 3 jaw component removable? And can you attach toys to the stroking shaft? Wife wants to know...

    @romeo35alpha38@romeo35alpha384 ай бұрын

  • @Workshop From Scratch, Great Video and Build. What Brand & Model is your Horizontal Band Saw? That’s a very nice looking Saw. I’ve been looking for a good Band Saw for Fab Work. I think this one would do nicely!

    @phillipchambers8487@phillipchambers8487Ай бұрын

  • I think this guys has tree which is giving metal sheets in his garden😂

    @mrtcnkndmr@mrtcnkndmr5 ай бұрын

  • Nice work

    @walidrahem913@walidrahem9135 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • With some changes you can make a rifling setup

    @tvsettv@tvsettv3 ай бұрын

  • Very nice work!

    @PolymerSandTechnology@PolymerSandTechnologyАй бұрын

  • Parabens pelo trabalho , mas vc poderia fazer um serra fita bancada vertical ao inves de usar o disco de policorte nas chapas de ferro adiantaria seu servico

    @erikbraguim4288@erikbraguim42885 ай бұрын

  • Belo trabalho.... Você e um gênio

    @TrafoEbenezer@TrafoEbenezer22 күн бұрын

  • Buenicima la pura crema 😁👍👍👍

    @user-dn5jx4sr9n@user-dn5jx4sr9n3 ай бұрын

  • КРАСИВАЯ РАБОТА! скажите почему выбрали горизонтальное расположение этой машины?

    @user-qz1zb2qm5t@user-qz1zb2qm5t5 ай бұрын

  • Super job bro

    @engineer567@engineer5674 ай бұрын

  • 0:17 I was fully expecting a finger wag. Kinda disappointed, but warmed my heart you didn't.

    @NSUGS@NSUGS5 ай бұрын

    • Yeah, the finger wagging is so condescending to viewers. I hate it.

      @randallsemrau6911@randallsemrau69115 ай бұрын

  • Wholly cow. Does it double as a log splitter? It’s pretty cool.

    @ozzybusey575@ozzybusey5755 ай бұрын

  • a great job

    @scaffale1385@scaffale13855 ай бұрын

    • Thanks 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • J'aime ce travail❤ vraiment je suispassionné si c'était tout près de chez moi.merci travail

    @NehemieNaindouba-vl7lz@NehemieNaindouba-vl7lzАй бұрын

  • What is the price of this laser welding machine and where it is available online?

    @muhammadharoonkhan6989@muhammadharoonkhan69894 ай бұрын

  • That is amazing for you creative 😊

    @mr.ranyhomemade2466@mr.ranyhomemade24665 ай бұрын

    • Thank you 😁

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • What are the specifications of the engine you use?

    @SELIM.42@SELIM.424 ай бұрын

  • No. I wasn’t hallucinating. He used a Moore Special Tools No. 1-1/2 Jig Borer as a welding table.

    @aj7utu@aj7utu4 ай бұрын

  • 14:50 Wait! How did you make the keyway slot to that?

    @filopat67@filopat675 ай бұрын

    • shhhhhhhhhh lol

      @encompassthyeclipse7278@encompassthyeclipse72785 ай бұрын

    • He went to his friend at made in Poland 🤣🤣🤣

      @yeagerxp@yeagerxp5 ай бұрын

  • Amazing

    @pareshsuthar8585@pareshsuthar858527 күн бұрын

  • Du beau travail je ne doute pas, vous avez réalisé votre machine avec précision oui , mais je crois quil manque un détail, vous avez oublié d'intégrer la possibilité de réglage de la course de l'outil de clavetage, votre course est fixe, ce qui rend impossible de faire du clavetage sur des pièces plus profondes. Merci

    @pecheur227@pecheur2272 ай бұрын

  • Kudos

    @edidiongemmanuel7357@edidiongemmanuel73573 ай бұрын

  • all good and all! but you have a lathe my friend, you could have just made the same but as a tool on the lathe.. BUT ITS GOOD! GJ

    @novakov7146@novakov71465 ай бұрын

    • Yes, I thought about it, but first of all I wanted to avoid having to dismantle the tools from the lathe every time to assemble it, cost-wise, everything comes from scrap, the gear with the motor I already had, and the second gear also comes from scrap, they are just painted

      @WorkshopFromScratch@WorkshopFromScratch5 ай бұрын

  • You are smart😊

    @osamaalshami-tj8en@osamaalshami-tj8en16 күн бұрын
KZhead