KZhead
Тәжірибелік нұсқаулар және стиль

Just Put A Battery On The Soldering Iron And You Will Be Amazed.

Creation Holic
2023 ж. 26 Жел.
591 942 Рет қаралды
Жүктеу

Hello everyone! You are watching video "Just Put A Battery On The Soldering Iron And You Will Be Amazed"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diyprojects #tipsandtricks #diy #tips

Пікірлер

  • If anyone is wondering, this is also called "Tinner's Fluid": ZnCl2 flux = hydrochloric acid (ammonium chloride) and a few tiny pieces of zinc. Let the zinc dissolve until it stops bubbling. It dissolves passivating oxides, exposing the clean metal surface.

    @MickyFoley@MickyFoley4 ай бұрын

    • So, a carbon-zinc battery could be used. An alkaline, ni-mh or lithium wouldn't yield the same results, right?

      @donswank6920@donswank69204 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

    • @@donswank6920 Zinc casing. Steel casing

      @ArminSchnur@ArminSchnur4 ай бұрын

    • I wonder if we can find it for sale

      @starfoxBR77@starfoxBR774 ай бұрын

    • I also tested it and it works great with pure HCL

      @DIYTechTrends@DIYTechTrends4 ай бұрын

  • specifically, it's HCL + zinc. HCL and the reaction fume is pretty poisonous, use safety gloves, mask, glasses, and do it outside

    @tuankumiskotak@tuankumiskotak4 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1014 ай бұрын

  • I used HCL hydrochloric acid solution to dissolve the zinc, it dissolved in 1 minute and bonded the solder very well. ❤🎉

    @DIYTechTrends@DIYTechTrends4 ай бұрын

    • Hello! thanks for your recommendation. Wish you all the best!

      @creationholic101@creationholic1014 ай бұрын

  • Greetings from Wellington in New Zealand. Thank you for sharing your clever ideas and techniques.

    @1unsung971@1unsung9714 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic1014 ай бұрын

  • This video was very informative and useful, thank you ❤

    @ebrahimi_shahin@ebrahimi_shahin4 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • Thank you for your educational and practical video. 🙏 from Iran

    @zamaanan@zamaanan3 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1013 ай бұрын

  • From ... Cali, Colombia

    @norbertoduque2457@norbertoduque24574 ай бұрын

  • Known in the U.K. as killed spirits, hydrochloric acid was known as spirit of salts years ago. Bakers fluid and most old time fluxes were made from it. Still the best, but wouldn’t recommend using on water systems, or electrical jobs because of corrosion.

    @anvilhead0@anvilhead04 ай бұрын

    • So basically it's flux but if you run out this could be a back up dose the flux help the soldered bit stick.?

      @firstname2853@firstname28534 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1014 ай бұрын

  • Super Ideas, a big compliment also for the professional making of the videos! Greatings from Germany Blackforest

    @rtvstudio@rtvstudio4 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1014 ай бұрын

  • If I hadn't seen it with my own eyes I would never have believed it. 🤠, this is just yet another reason why I have subscribed to this Channel. 👍👍👍👍👍

    @tof3275@tof32754 ай бұрын

    • Thanks for subbing

      @creationholic101@creationholic1014 ай бұрын

  • Interesting, I will have to try this. Thanks, Yorba Linda, California, USA

    @Scott4271@Scott42712 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1012 ай бұрын

  • El cloruro de Zink (qure es lo que preparaste), es un muy buen fundente porque ayuda aparete a disolver los oxidos que dificultan las soldaduras, pero todas las soldaduras que mostraste estan " frias", y eso es muy malo, nececitas proporcionarles mas calor para que te queden muy bien, suerte.

    @ernestoterrazas3480@ernestoterrazas34804 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1014 ай бұрын

  • سلام بزرگوار گرامی ❤ از ایران تهران افتخار میکنیم از اشنایی با شما اوستاد سر‌ور والا از تجربیاتون نهایت استباده را میبریم با آرزوی موفقیت روز افژون شما راخواهانیم ❤❤❤

    @user-gq5zo7zg4k@user-gq5zo7zg4k4 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • Thank you Bro fantastic Great greetings from Switzerland

    @Zaubersterndli@Zaubersterndli4 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic1014 ай бұрын

  • great videos. very helpful

    @Alex-Tips@Alex-Tips4 ай бұрын

    • Glad you think so!

      @creationholic101@creationholic1014 ай бұрын

  • I appreciate the info. I dont always have borax handy so I'll give this a try. Thanks

    @bazookab6410@bazookab64104 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1014 ай бұрын

  • 👏 saludos desde México.

    @odiseo-lh4ku@odiseo-lh4ku4 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1014 ай бұрын

  • Great! Greetings from Brazil!!!

    @renatobressan748@renatobressan7484 ай бұрын

    • Hey, thanks!

      @creationholic101@creationholic1014 ай бұрын

  • Ben Almanya'dan çok güzel bir fikir teşekkür ederim beğendim

    @huseyinkaya3608@huseyinkaya36083 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic1013 ай бұрын

  • Gostei da idéia

    @sergiopedrope9067@sergiopedrope90674 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • Amazing ❤❤❤

    @Invention75@Invention754 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1014 ай бұрын

  • Gratidão estou em ilha de Floripa santa Catarina brasil

    @user-qs8mf9vn8d@user-qs8mf9vn8d4 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic1014 ай бұрын

  • 🤩MOTIVANT ( génial ). Avec une entité d'exeption.

    @fluxelectron508@fluxelectron5084 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

    • @@creationholic101 yes, so it now open mind and very nice for all.Good luck 🤞

      @fluxelectron508@fluxelectron5084 ай бұрын

  • Un saludo desde España❤

    @Karretero.1207@Karretero.12073 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

      @creationholic101@creationholic1013 ай бұрын

  • Muy buen video

    @norbertoduque2457@norbertoduque24574 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic1014 ай бұрын

  • नागपुर महाराष्ट्र से आपको बहुत बहुत🙏 धन्यवाद

    @UrgentRubberStampService-uv7in@UrgentRubberStampService-uv7in3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • عالی بودخیلی هم مفید واقعا بهش احتیاج داشتم ممنون دوست گرامی

    @user-tg1mg8ft5w@user-tg1mg8ft5w3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • You a good men

    @user-hq9dh3qh6c@user-hq9dh3qh6c4 ай бұрын

  • طريقة رائعة سوف اقوم بتجربتها

    @Arab_musicana@Arab_musicana3 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1013 ай бұрын

  • Great 👍

    @abod2702@abod27024 ай бұрын

    • Thank you 👍

      @creationholic101@creationholic1014 ай бұрын

  • What I don't understand is why did they solder the red wire on the negative end of the battery & the black on the positive end (I realize the actual connection is irrelavent to the project)... But still!

    @NickatLateNite@NickatLateNite4 ай бұрын

  • could you please tell me how many volts the device in your hand works?

    @turalzulfuqarov8786@turalzulfuqarov8786Ай бұрын

    • 60W

      @creationholic101@creationholic101Ай бұрын

    • @@creationholic101 thanks

      @turalzulfuqarov8786@turalzulfuqarov8786Ай бұрын

  • its cool! thank you!

    @yosiakifukuhara1255@yosiakifukuhara12553 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1013 ай бұрын

  • Is that good for high heat temperature as well?

    @Atlantic-eagle53@Atlantic-eagle532 ай бұрын

  • Bonjour de la Région du Tarn, France. Un Grand 😊MERCI pour ton super vidéo, il me tarde de le tester.

    @daniellm5630@daniellm56302 ай бұрын

    • I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

      @creationholic101@creationholic1012 ай бұрын

  • video bổ ích quá bạn

    @CreativeMD17@CreativeMD174 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • Very good information

    @babar9529@babar95294 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1014 ай бұрын

  • Muy ingenioso. Cual es el principio?

    @nelsonal75@nelsonal754 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • Very good 👍 from , Portugal

    @Vinita_Reiki@Vinita_Reiki4 ай бұрын

    • Thank you very much!

      @creationholic101@creationholic1014 ай бұрын

  • Very good..Excellent 😊

    @khadigadiga2858@khadigadiga28584 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • I am amazed you actually lit a led light with a battery, Wow amazing what will people come up with next.

    @bretteee@bretteee3 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1013 ай бұрын

  • That was a lot of work....for to use a power source (the battery) that will eventually be used up, and the whole apparatus will have to go to the trash.....Nonetheless, it was a good science lesson.

    @THE_HMRC@THE_HMRC4 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

    • Ya no consumas más fentanilo 😢😢😢😢😢😢

      @javiermorales2020@javiermorales20204 ай бұрын

    • Must use gloves to protect skin

      @ArturSaldanha@ArturSaldanha4 ай бұрын

  • Teşekkürler Türkiye

    @bunyaminsahin9627@bunyaminsahin96274 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1014 ай бұрын

  • Que des bonnes idées !!! Merci beaucoup 🙏🇫🇷

    @francois2154@francois21544 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

    • Ces quoi le produit liquide svp

      @majestelehogon223@majestelehogon2233 ай бұрын

  • Hermano usa un mejor cautin, para esos trabajos lo mejor es el de 40 Vatios. Saludos desde Venezuela.

    @gonzalomaldonado1843@gonzalomaldonado18432 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1012 ай бұрын

  • I 'm türkiye.

    @abdullahalk3961@abdullahalk39614 ай бұрын

  • São Paulo - Brasil

    @nelsonpoliteixeira6053@nelsonpoliteixeira60534 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1014 ай бұрын

  • Bonsoir bravo

    @jccelas2977@jccelas29774 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

  • هل استطيع استخدام حمض الهيدروكلوريك المركز على قطع الزنك وإلى متى أستطيع الاحتفاظ بالسائل

    @user-xi2mv4iv9j@user-xi2mv4iv9j4 ай бұрын

    • okay !

      @creationholic101@creationholic1014 ай бұрын

  • แบ่งปันประสบการณ์😮😮😮

    @user-ei6np8yj1i@user-ei6np8yj1i4 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1014 ай бұрын

  • Que idea tan buena está, una vez quise soldar un cable sobre una batería, y no pude, y la solución está en este documental. Mucha gracias. Saludos desde Caracas Venezuela

    @albertonavarro6711@albertonavarro67114 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1014 ай бұрын

  • Very nice! follow you from Azerbaijan

    @turalzulfuqarov8786@turalzulfuqarov8786Ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic101Ай бұрын

  • from buenos aires,Agentina,south america

    @Ramon-xs3ln@Ramon-xs3ln23 күн бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic10117 күн бұрын

  • Cuanto tiempo puede almacenarse o cual es su fecha de caducidad de tenerla Saludos desde Colombia 🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴

    @carlospaternina7200@carlospaternina72004 ай бұрын

    • You close it tightly and preserve it for quite a long time

      @creationholic101@creationholic1014 ай бұрын

  • Bravo, ovo je super

    @b.m.-ez1xw@b.m.-ez1xw4 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • It's called etching, but what they don't tell you is that it is perm destructive solution as the action will continue to corrode underneath the welds

    @prehensileman7254@prehensileman7254Ай бұрын

  • دمت گرم براوو خیلی جالب و اموزنده بهمن از ایران

    @abasnajafi91@abasnajafi91Ай бұрын

    • Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic101Ай бұрын

  • 🌹☺️🙂👍🏻 sweden here😊.

    @skrickerum@skrickerum3 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • Rio de Janeiro - Brasil.

    @celsopereiratouceira344@celsopereiratouceira3444 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1014 ай бұрын

  • Show!!

    @moisesalves4015@moisesalves40154 ай бұрын

    • Yeah!!

      @creationholic101@creationholic1014 ай бұрын

  • و فوقالعادیی ِvery nice

    @DelBakhteh-kx6kh@DelBakhteh-kx6kh4 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1014 ай бұрын

  • Support

    @boopathyboopathy9300@boopathyboopathy93004 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • شمابسیاربادقت ‌کارتان راانجام میدهید🎉🎉🎉این عالیه

    @user-fv6ps7xg3g@user-fv6ps7xg3g2 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1012 ай бұрын

  • Desde Colombia

    @davidibarraarrieta2103@davidibarraarrieta2103Ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic101Ай бұрын

  • So ordinary soldering flux is made from Hcl and Zinc metal pieces ? ---interesting --(Africa )

    @CarlWinter-oy8uf@CarlWinter-oy8ufАй бұрын

    • Thank you for watching

      @creationholic101@creationholic101Ай бұрын

  • Nifty and cool but isn’t it easier to get the zinc from something else?

    @leenb.7936@leenb.79364 ай бұрын

    • I want to take advantage of the things around me

      @creationholic101@creationholic1014 ай бұрын

  • From egypt

    @user-hq9dh3qh6c@user-hq9dh3qh6c4 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1014 ай бұрын

  • ما هذه الماده وشكرا لك

    @MAMODOSEF-bf9ey@MAMODOSEF-bf9ey4 ай бұрын

    • Dynamite Patrick Patrikios

      @creationholic101@creationholic1014 ай бұрын

  • واقعا عالی عالی عالی

    @mahyaromidi5644@mahyaromidi56444 ай бұрын

    • Glad you like them!

      @creationholic101@creationholic1014 ай бұрын

  • Soy de Guadalajara Jalisco México 😅🇲🇽

    @ficus663@ficus6634 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1014 ай бұрын

    • @@creationholic101 😅😅😅😅🖐️😁👍

      @ficus663@ficus6634 ай бұрын

  • Buenas tardes, otra forma de conseguir fundente para este tipo de soldaduras es usar lejía directamente .Se aplica unas gotas de lejía con un pequeño bastón o pincel sobre la superficie a soldar. USAR SIEMPRE GUANTES Y MASCARILLA. Yo no recomiendo usar estos métodos para soldar conexiones a una pila o batería, se puede producir un cortocircuito .

    @carlosibarramartinez2630@carlosibarramartinez26304 ай бұрын

    • Thanks for sharing!

      @creationholic101@creationholic1014 ай бұрын

  • Rất hay. Nhưng nó sẽ bị rỉ sét chỗ hàn. Có cách nào khắc phục không.😢

    @tuanbui1864@tuanbui18644 ай бұрын

    • you can paint it

      @creationholic101@creationholic1014 ай бұрын

  • Pregunta: El ácido clorídrico a que concentración. ¿Me vale el SALFUMAN?

    @andkelondoluin7192@andkelondoluin71922 ай бұрын

    • you can use pure acid or greater than 22%

      @creationholic101@creationholic1012 ай бұрын

  • Muchas gracias, por enseñar. Soy de Madrid, España

    @antoniodiazbenito1823@antoniodiazbenito18234 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

  • Isso é bem antigo, eu sabia da pilha mas o outro componente não !!!

    @betoterra4722@betoterra47224 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

  • Put on protective gear???!!!

    @RobDoubleCheeseburge@RobDoubleCheeseburge4 ай бұрын

  • Much easier to buy ready made.

    @jokesgalore599@jokesgalore5994 ай бұрын

    • Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

  • 👍👏

    @ozkansariyar8903@ozkansariyar89034 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • Exelente pongo en práctica👍🇺🇾🧉

    @juanrussi8351@juanrussi83514 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • ❤ 😘😍

    @hengkiputra748@hengkiputra74817 күн бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1018 күн бұрын

  • عالی👍🌹🙏🇮🇷

    @mohamadreza6266@mohamadreza62664 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1014 ай бұрын

  • 👌👌👏👏 Where are you from man?

    @anantparkash@anantparkash4 ай бұрын

    • I come from Vietnam

      @creationholic101@creationholic1014 ай бұрын

    • If you are from Vietnam but you have United States country selected in your KZhead channel settings. Please tell me the reason and also that selecting another country doesn't cause any problem in channel monetization or monetized channel doesn't demonetize. Kindly take out some of your valuable time and let me know about it in detail. I am your dear subscriber, please make sure to reply this comment❤❤

      @anantparkash@anantparkash4 ай бұрын

  • Holy Moly what a nice VIDEO

    @TheFirstHammer@TheFirstHammer4 ай бұрын

    • I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

      @creationholic101@creationholic1014 ай бұрын

  • Chez moi ( à Portugal ) on avez l'habitude de faire nos même nôtres plaques de PCB. Il suffisait de les dessiner avec un marqueur et les plonger dans une solution de 2 produits que j'arrive plus à trouver. Vous n'avez pas un méthode simple pour le faire chez soi même SVP d'avance et bonne continuation.

    @daniellm5630@daniellm56302 ай бұрын

    • Thanks for sharing!

      @creationholic101@creationholic1012 ай бұрын

  • Que disolvente usa para derretir eso

    @ivanreneramirezblanco4743@ivanreneramirezblanco47434 ай бұрын

    • HCL

      @creationholic101@creationholic1014 ай бұрын

  • هل استخدامه عادي و غير مضر بالصحة الرئتين و العيون ؟ Is its use normal and not harmful to the health of the lungs and eyes?

    @aramahmadhassan4069@aramahmadhassan40693 ай бұрын

    • ok !

      @creationholic101@creationholic1013 ай бұрын

    • @@creationholic101 Is its use normal and not harmful to the health of the lungs and eyes?

      @aramahmadhassan4069@aramahmadhassan40693 ай бұрын

    • If you use it sparingly, it won't cause any harm. To be safe, you can wear a mask and glasses

      @creationholic101@creationholic1013 ай бұрын

  • Pls what the liquid that was poured into the glass ,

    @Joseph_Nnadi@Joseph_NnadiАй бұрын

    • " HCl " ❗Please enable subtitles in your language 🙋🏼‍♀ Thanks for watching 😋🤗😘

      @creationholic101@creationholic101Ай бұрын

  • To solder on batteries you should not use a soldering iron. Use a point welder

    @BurkenProductions@BurkenProductions4 ай бұрын

    • Thanks for sharing!

      @creationholic101@creationholic1014 ай бұрын

  • Where are your protective gloves? And disclaimers about the dangers of disassembling batteries or mixing various chemicals? The title & thumbnail encourage viewers to "just put a battery on a soldering iron", giving the appearance that you care more about generating clicks/views/money than ensuring the safety of the communities where you publish content. You responded elsewhere that "the goal of this video was to showcase a unique approach to recycling"...yet that goal is largely incongruent with how you presented this content & is easily missed by the average viewer. I do hope this was an isolated, unintentional oversight on your channel.

    @petalpusher@petalpusher4 ай бұрын

    • Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

      @creationholic101@creationholic1014 ай бұрын

    • no warnings...... no labels.... just let natural selection take over

      @user-mk8mn9dy3b@user-mk8mn9dy3b3 ай бұрын

  • 來自台灣粉絲的問候❤

    @lww3988@lww39883 ай бұрын

    • Hello! I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic1013 ай бұрын

    • @@creationholic101 謝謝您

      @lww3988@lww39883 ай бұрын

  • Olsztyn Poland 😮

    @mirekmikulski7635@mirekmikulski76354 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

  • Portugal

    @AnaMarina@AnaMarina4 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1014 ай бұрын

  • Rất thuyết phục , bạn có thể like cmt của tôi được chứ 5:51

    @meovat5s@meovat5s4 ай бұрын

    • Hello! I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic1014 ай бұрын

    • @@creationholic101 ❤️❤️❤️ cảm ơn

      @meovat5s@meovat5s4 ай бұрын

  • 請問有大約的比例嗎？

    @alexwang1223@alexwang12232 ай бұрын

    • 1/2

      @creationholic101@creationholic1012 ай бұрын

    • 感謝您的回覆 @@creationholic101

      @alexwang1223@alexwang12232 ай бұрын

  • what is the water poured into the jar?

    @qarabagazerbaycan1610@qarabagazerbaycan1610Ай бұрын

    • HCL

      @creationholic101@creationholic101Ай бұрын

  • Can you tell me your video upload time please 🙏

    @Rsblog117@Rsblog1174 ай бұрын

    • I upload videos every 3 days/video and around 7pm-8pm

      @creationholic101@creationholic1014 ай бұрын

    • @@creationholic101 Thank you so much 🥺🥺

      @Rsblog117@Rsblog1174 ай бұрын

  • Can i do it on my car's exhaust pipe as well?

    @Atlantic-eagle53@Atlantic-eagle532 ай бұрын

    • Tin will not withstand high temperatures

      @creationholic101@creationholic1012 ай бұрын

  • London

    @user-mgc@user-mgc4 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1014 ай бұрын

  • Soy ESPAÑOL

    @andkelondoluin7192@andkelondoluin71922 ай бұрын

  • türkiyeee biladerrrr

    @yucelgucluturk5586@yucelgucluturk55863 ай бұрын

    • Thank you for watching

      @creationholic101@creationholic1013 ай бұрын
KZhead