KZhead
Тәжірибелік нұсқаулар және стиль

Even Veteran Engineers Had To Learn This from Me! Idea of Using 1,5V Battery to Weld Aluminum Brakes

Gaus DIY
2024 ж. 3 Сәу.
571 367 Рет қаралды
Жүктеу

Hello everyone! You are watching video "Even Veteran Engineers Had To Learn This from Me! Idea of Using 1,5V Battery to Weld Aluminum Brakes
"
I hope you enjoy watching my video!
► Subscribe: / @gausdiy
On Gaus DIY channel, you can learn various inventions, tips, science projects, crafts idea and DIYs teaching how to reuse or recycle.
© Copyright by Gaus DIY ☞ Do not Reup
#diyprojects #tipsandtricks #diy #tips

Пікірлер

  • Drill the holes using a drill press for precision. Use a hardened steel nail or brad. Assemble and bond pieces together with J-B Weld. Then throw away.

    @ItsVideos@ItsVideos16 күн бұрын

    • 😅😅😅😅

      @anthonyrock5039@anthonyrock503914 күн бұрын

    • install completed brake lever onto scooter then throw scooter away.

      @theOriginalDonHuevo@theOriginalDonHuevo11 күн бұрын

  • Just an absolute waste of 13 minutes and 49 seconds of your life that you'll never get back.

    @sonnygoulette675@sonnygoulette67517 күн бұрын

    • I thought it was quite funny. I'm pretty sure it was meant to be.

      @fatroberto3012@fatroberto301212 күн бұрын

    • Truly cringe-worthy...

      @brucespainhower2534@brucespainhower253412 күн бұрын

    • Rechne mal die 400 + Leute , die sich das Vid angesehen haben als Multiplikator für "verschwendete Lebenszeit" drauf..... Wir wollen doch verarscht werden , oder ? Und mal ganz ehrlich , selbst wenns funktioniert hätte ? 10€ gespart und dafür fährt dann immer das Risiko mit das ich mit so einem Mist einen tödlichen Unfall verursache ? No Way !

      @tomperli4513@tomperli451312 күн бұрын

    • Thx i stop watching the video at 3:32 😂😂

      @Sparta_nl@Sparta_nl11 күн бұрын

    • @@Sparta_nl You're welcome. He just throws it away and tells you to buy a new one at the end anyway.

      @sonnygoulette675@sonnygoulette67511 күн бұрын

  • You just wasted your time 😂😂

    @anonymously241@anonymously24111 күн бұрын

  • I have broken motorcycle foot rest in my store. Thought about fixing it several times. Your video helped me a lot to throw it. Thank you

    @melonx9202@melonx920226 күн бұрын

  • Truly the last Fix-It video you'll ever have to watch... 😂 13:36

    @deannedrda261@deannedrda26126 күн бұрын

    • Stimmt 😂😂😂😂😂

      @Tandrabuddha@Tandrabuddha17 күн бұрын

    • Eres un bueno para nada hubieras empezado por el final

      @jorgereadi4706@jorgereadi470615 күн бұрын

    • It ignorant people that purposely wast others time for no other reason than to be a dick that shouldn't have a yt channel p.s.🖕​@@Tandrabuddha

      @master2all@master2all13 күн бұрын

    • I think you mean the last one you WANT to watch.

      @jimmytragle7503@jimmytragle75038 күн бұрын

    • アルゴン溶接してもらえよ

      @phantomghost4442@phantomghost4442Күн бұрын

  • To borrow the words of the famous Guy Martin "this has got hospital written all over it" . if it doesn't get you during the repair it will get you after it.

    @johntheoldmod@johntheoldmod25 күн бұрын

    • I was thinking what a potential explosion. Wonder how long those hot glue joints will last with gas working on them.

      @graftedin3@graftedin321 күн бұрын

  • Take into account the cost of bit’s and pieces plus hourly rate a new one is cheaper and safer

    @LaurenThornton-jb9bq@LaurenThornton-jb9bq25 күн бұрын

    • ⁠Don’t watch to the end…complete waste of time!!!

      @greggsidwell8307@greggsidwell830718 күн бұрын

    • but depend if can buy the same

      @RexusXX1970@RexusXX197015 күн бұрын

    • "Buy a new one" only works if 'new ones' are available. Depends on the part in question. There are ways to weld aluminium reliably. This is not one of them.

      @tehspamgozehere@tehspamgozehere15 күн бұрын

  • There's 15 minutes I'll never get back

    @pauldurand3840@pauldurand384012 күн бұрын

  • Goal of this video achieved. I haven't laughed so well in a long time

    @tituschirila7650@tituschirila765020 күн бұрын

    • Thank! Have a nice day!

      @GausDIY@GausDIY19 күн бұрын

  • Just get an ac/dc tig welder, bottle of argon, helmet, gloves, a workshop.

    @mattsan70@mattsan7024 күн бұрын

    • What a load of work for that. I’d rather just replace it

      @eddiee9491@eddiee949120 күн бұрын

    • @@eddiee9491 true

      @mattsan70@mattsan7020 күн бұрын

  • That will work until you need to stop quickly and then you will find one piece in your hand and no brakes. Good luck with that.

    @mtnphot@mtnphot9 күн бұрын

  • I wish i had’ve found this useful video before I went on Amazon and bought a brand new pair for $18.99 delivered the following day🤔

    @edwarddoddy2130@edwarddoddy213019 күн бұрын

    • Thank you, but if you buy a new one, it will be very good and safe. Wishing you and your family a happy weekend

      @GausDIY@GausDIY18 күн бұрын

  • Die Mülltonne war das beste in dem Video

    @dirkpulpanek9098@dirkpulpanek909823 күн бұрын

  • An engineer would have told you that what you did was not welding but more of a back yard aluminum solder attempt. Welding involves melting rhe base metal and the fill metal so that they form a rather uniform alloy making a continous metal piece. You did not even achieve a good solder joint with your technique.

    @johnrains8409@johnrains840926 күн бұрын

    • You have to watch til the end

      @ZapattaZ@ZapattaZ21 күн бұрын

    • 😅😅😂😂

      @joseantonioramirezm8928@joseantonioramirezm892820 күн бұрын

    • @@ZapattaZDon’t bother

      @SpaceGhostSupreme@SpaceGhostSupreme20 күн бұрын

    • He is just trying working with his hands until he gets the porn music studio off the ground

      @MrTravis789@MrTravis78919 күн бұрын

    • It's an act of brazing aluminum.

      @user-tu4lk6ic6u@user-tu4lk6ic6u18 күн бұрын

  • Was das für ein Video , wie Sprenge ich mich selbst weg , Kauf dir einfach ein neuen Bremshebel und du lebst länger 😂

    @user-st7bt6ze4t@user-st7bt6ze4t20 күн бұрын

  • Andy Kaufman humor where you get the laugh, but the joke is on us.

    @FDTSafety@FDTSafety11 күн бұрын

  • I would never run the risk of finding myself braking or shifting with a broken lever. it is a piece subjected to constant stress and for the little cost the game is not worth the candle

    @vitangelomoscarda2522@vitangelomoscarda252227 күн бұрын

    • If the motorbike falls, it can cause the brake lever to break. Thank you, have a nice day!

      @GausDIY@GausDIY27 күн бұрын

    • ​​@@GausDIYи позвоночника, чего уж там😅 так что всё же лучше заменить на литую😂 тут на велике опасно ездить, что уж там про мотоцикл говорить😅

      @Stive_Fox@Stive_Fox26 күн бұрын

    • @@GausDIY there's a reason if it breaks. Accidentally it's something that can happen, it's a different matter if it happens because I tried to repair it. the insertion of a pin, also made of iron, a harder material than the alloy, reduced the thickness of the section intended to accommodate it, thus being able to cause a sudden breakage during the stroke, the work for carrying out the welding was ingenious but certain materials are particularly unsuitable in DIY, I sold bar counters, compressors, scales, slicers, fryers, meat mincers etc... and our technicians did great on copper, soft iron and stainless steel, they were capable of making iron rollers for graters, but also for welding of aluminum or anodized alloys, brass, cast iron, antimony and more had to turn to equipped laboratories and it was often convenient to order the new piece from the supplier. good life.

      @vitangelomoscarda2522@vitangelomoscarda252226 күн бұрын

  • I thought the idea of reinforcing it by driving in screws was a great idea. Finally, filling the gaps with epoxy resin mixed with aluminum powder may have worked. I liked the honesty of the video by showing it to the end and then throwing it in the trash.

    @user-zu9hw4ew8f@user-zu9hw4ew8f26 күн бұрын

  • Just started watching and am wondering what's in the middle bottle. Is that urine? Is it beer? 🤣

    @JBCavern@JBCavern22 күн бұрын

    • Yeah, why don’t they say what it is?! Probably is “apple cider vinegar.”

      @1-2_Flush_Water_Saver@1-2_Flush_Water_Saver18 күн бұрын

    • @@1-2_Flush_Water_Saver It`s the explosion barrier.

      @user-of8or9ep8p@user-of8or9ep8p17 күн бұрын

  • I bet his mum wasn't happy with her dining table when she got home!

    @steveharper2857@steveharper285725 күн бұрын

  • Me parece que con lo q cuesta una palanca nueva no vale la pena perder tiempo y pasando trabajo con eso,lo q más me gustó es el título del vídeo,siga con esa humildad!!!!! Jajajaja

    @sergioalmeida1517@sergioalmeida151726 күн бұрын

    • Que desperdicio de tiempo

      @jorgesalcedo5614@jorgesalcedo561425 күн бұрын

  • If your life has that litttle value i guess it s an option

    @davidlucas6701@davidlucas670125 күн бұрын

  • idée intéressante mais vouée à l'échec 1: une soudure cela se prépare avec des surfaces de contact propres, sèches, brossées afin de pouvoir se contacter avec l'apport de soudage.2:une poignée en aluminium ne sera pas soudée avec un apport de plomb ou d'étain ce n'est pas compatible et surtout la soudure alu se fait sous vide d'argon.3: le report que vous avez fait avec le scotch est bien pour la première partie mais vous avez pour la seconde juste copié et décalé le scotch sur la partie de droite or il fallait retourner le scotch pour qu'il corresponde au profil opposé.4: il suffisait de percer comme fait sur les 2 morceaux et fileter chaque élément en insérant une tige filetée de vis et serrer l'ensemble avec de la résine époxy qu'il suffisait de poncer ensuite pour obtenir un bon résultat.5 Pour bien souder il est utile de bien chauffer les 2 parties à souder si vous voulez que l'apport tienne. Si vous ne chauffez que l'apport aucune soudure de se fera et l'apport fondra et tombera au sol. Sinon un bon point pour le montage du chalumeau.

    @jptahaan167@jptahaan16722 күн бұрын

    • Merci de partager vos connaissances et votre expérience. Je vous souhaite, à vous et à votre famille, une bonne journée !

      @GausDIY@GausDIY21 күн бұрын

  • What in the 7 eleven is goin' on here? 😆

    @justinkirchner7873@justinkirchner78735 күн бұрын

  • To make your weld with heterogeneous filler metal, you must first heat your support that you want to weld, so that it melts the filler metal, if it is compatible!? of which you will make sure beforehand that the latter has a lower melt degree index than what you want to weld. Otherwise congratulation for the creation and assembly of your blowtorch and the manufacture of the aluminum wrist brace, beautiful engineering.

    @sasukefree8763@sasukefree876316 күн бұрын

  • Da ich schon länger keinen guten Witz gehört hatte, konnte ich mich reichlich über dieses Video amüsieren 🤣

    @monosignum@monosignum11 күн бұрын

  • I felt, I felt that something would go wrong. So much innovation and a spectacular ending😅😅😅😅😂😂😂😂

    @Mifune-vk8tz@Mifune-vk8tz12 күн бұрын

  • You know what. All you people keep complaining about this video but i don't see any of you having the mental capacity to even fathom this idea or even trying to bring something back to life. Including your manners... he did a great job and made some great all viewer friendly content. Thank you for your video and I'm sorry these people are so entitled to their not existent imagination.

    @nikkilovetheyardsale-again2608@nikkilovetheyardsale-again260810 күн бұрын

    • I concur

      @tinyvanderwesthuyzen6513@tinyvanderwesthuyzen65139 күн бұрын

    • Yes it is good to repair broken things instead of tossing them in the trashcan. But it is a waste of time being clueless how to do it. A thin sheet of alloy will turn into ash if it gets in contact with a flame. You can weld alloy but first you need a gas shielded welding machine and second the training how to use it.

      @geroldrainer9656@geroldrainer96568 күн бұрын

    • Goes to show you that even the worse of ideas can fool, some people.

      @eugeneplakosh8423@eugeneplakosh84237 күн бұрын

    • When you have time on your hands, heck anything is possible

      @josepharagon8259@josepharagon82596 күн бұрын

  • Great video bro, you put a big smile in my face ... Thanks for sharing

    @mohandsss@mohandsss19 күн бұрын

    • Glad you enjoyed it ! ❤️❤️

      @GausDIY@GausDIY18 күн бұрын

  • the duct tape method as you did it does not take into account the fact that the image is mirrored but not superimposable

    @superfab70@superfab7021 күн бұрын

  • I think that most of de comments are from people that didn’t see the end of the video 😊

    @manuelurdaneta2105@manuelurdaneta210526 күн бұрын

    • I'm very grateful to you for watching and understanding the message I want to convey

      @GausDIY@GausDIY25 күн бұрын

    • ​@@GausDIY They might have lost the will to live before you threw your attempted repair into the trash bin. May I suggest you do the same with your camera and prevent us all WASTING our time too.

      @DelTangBrav@DelTangBrav25 күн бұрын

  • You taught me one thing. How too waste time 😂😂😂

    @geoffreynolds8835@geoffreynolds88354 күн бұрын

  • 爛掉了啦，太久又沒效率還麻煩死，直接焊一焊就好了

    @user-uw8th1fj8b@user-uw8th1fj8b27 күн бұрын

  • Das ist keinesfalls Schweißen mit einer 1,5V Batterie, sondern lediglich ein dilettantischer Murks.

    @martinmaurer5060@martinmaurer506015 күн бұрын

  • Next Up: Engineers show me how to dislodge my head from a tailpipe after my brake lever failed.

    @mattw7949@mattw794910 күн бұрын

  • If it broke once, it will break again. But a new One.

    @frankheilmeier3930@frankheilmeier393015 күн бұрын

  • لو سمحت مكنه البسكويت اتكسرت من المسمأر الربطمن عند الطبليه

    @sosoanwar3883@sosoanwar388323 күн бұрын

  • yep, it would been better to make a cast and melt aluminium to make a new one.

    @wellgoahead@wellgoahead21 күн бұрын

    • Yes, That's a great idea

      @GausDIY@GausDIY20 күн бұрын

  • Nagyon kemény videó. De tanulságos hogy a sok kínlódás és idő fecserles mely a takolashoz vezet a vége mindig a kukában landol😂😂😂😂

    @bandika75.22@bandika75.226 күн бұрын

  • L'archétype du mauvais bricoleur. Toutes les étapes sont soigneusement foirées. Ça tient du génie !

    @vancuyckboulou4270@vancuyckboulou427018 күн бұрын

  • Mdr, so modest, that he will build us the future rocket by going to Mars

    @waltahett8784@waltahett878416 күн бұрын

  • The comment section is the best part !

    @graftedin3@graftedin321 күн бұрын

  • Idea for video creator: Instead, take the output fuel line and place in left nostril. Pinch right nostril shut. Close mouth to prevent escaping gas. Turn on motor for approx 25-30 seconds. Have lighter ready. Open mouth slightly and ignite lighter near mouth. Hopefully this method will prevent the posting of stupid ass posts.

    @matthewlturner@matthewlturner6 күн бұрын

  • I love the end, it kept me hooked trying to figure out what was the point in this DIY.

    @pedromeza2398@pedromeza239812 күн бұрын

    • Thank Bro

      @GausDIY@GausDIY11 күн бұрын

  • Ese tornillo aujerea mejor que una broca mecha donde lo compraste?

    @pabloponcela6945@pabloponcela694512 күн бұрын

  • Don't get pulled over with this stuff in your car.

    @mikezoltan3227@mikezoltan322717 күн бұрын

  • To much trouble. Just find someone with a welder and geter done. Interesting though.

    @Dune956@Dune95617 күн бұрын

  • I was gonna call you a idiot but since you threw it in a garbage I think you're smart.

    @larrybraddell3162@larrybraddell316216 күн бұрын

    • Ok Friend! Have a good day!

      @GausDIY@GausDIY15 күн бұрын

  • If you got that right, I'd be blown away. Good effort. 😅

    @granthendriksz2507@granthendriksz25077 күн бұрын

  • Aluminium oxidiert unter Hitze zu Asche, man muss es mit Schutzgas schweissen. Darum ist das "Schweissmaterial" auch verbrannt. Einmal googlen hätte gereicht.

    @geroldrainer9656@geroldrainer96568 күн бұрын

  • Come buttare un sacco di tempo e rischiare di incendiare casa. Proprio da ingeniere

    @Mrlespauly@MrlespaulyКүн бұрын

  • had naar school gegaan dat had gescheeld!!!

    @reneschaap8091@reneschaap809126 күн бұрын

  • هل السائل نفط او بانزين وماهو المحرك الدافع للهواء حقآ فكرة اعجبتني ❤

    @cosh7670@cosh767027 күн бұрын

    • هذا السائل هو البنزين، شكرا لك!

      @GausDIY@GausDIY27 күн бұрын

  • wtf this was nice 😂😂😂

    @sharadkumar91@sharadkumar9126 күн бұрын

  • Interesting idea! But skip all the torch stuff and bottles and hot melt, and just use JB weld and sand it. Probably stronger and way quicker. Still might be better to buy new one!

    @advancednutritioninc908@advancednutritioninc90815 күн бұрын

    • Great tip! I find your method very good, if possible I will try your method. Thank you so much!

      @GausDIY@GausDIY14 күн бұрын

  • Ein erfahrener Ingenieur hat gerade von dir gelernt, wie man seine Zeit verschwendet...

    @michaeldoll7323@michaeldoll732312 күн бұрын

  • Saludos desde Barinas Venezuela gracias por compartir tus enseñanzas

    @santosnavas3234@santosnavas323414 сағат бұрын

  • After seeing what a bad idea this was, why did you post this long video? Glad I scrolled through it in 60 seconds 😂

    @martyjones5841@martyjones584114 күн бұрын

  • 😂😂😂man don't waste my time again 🤣🤣🤣🤣

    @paipisa8624@paipisa862417 күн бұрын

  • I would sooner use chewing gum than that method 😂😂😂😂😂

    @karlalton3170@karlalton317023 күн бұрын

  • As an 'engineer' I can confirm this is codswallop. Getting folks to watch to make some shekels off youtube

    @taffyddu@taffyddu20 күн бұрын

  • जहां यह नया नहीं मिलता है ऐसा कोई गांव हो या जंगल हो उसमें यह मेहनत करना जरूरी है....

    @jayantibhaihirpara733@jayantibhaihirpara73326 күн бұрын

  • Ich kann vor lachen nicht !

    @jurgenschroth9347@jurgenschroth934719 күн бұрын

  • Hola, soy el señor ingeniero veterano , he aprendido mucho … Gracias por todo Me vuelvo a mis asuntos de ingeniero veterano 😅

    @Toni-if4rj@Toni-if4rj17 күн бұрын

    • Bueno, gracias amigo divertido y humorístico. Deseándote siempre felicidad y buena suerte en la vida. ❤️

      @GausDIY@GausDIY16 күн бұрын

  • Eso lo hice hace años y mi moto no pasó la ITV, me dijeron que pusiera una nueva

    @breoganjefe@breoganjefe22 сағат бұрын

  • Fastest fast forward ever attempted by me.

    @JubbaheyChannel@JubbaheyChannel15 күн бұрын

  • would you risk you life with a cheap repair or replace it

    @daveberry2177@daveberry217715 күн бұрын

  • Funny april fools video. Comment section is even funnier, you can tell who did not really watch

    @wiesshund-games@wiesshund-games13 күн бұрын

  • quicker to go to a shop on line with the part number = New replacement... next go see your general practitioner = doctor and and ask for a mild chill out prescription as all the signs of genius bodger have are returning

    @oldbladderhorn@oldbladderhorn17 күн бұрын

  • This is by far the best channel how not to do follow any advice. Trigger alarm 🚨: South Park >> Washington Redskins 🤣🤣

    @maxpower9253@maxpower925320 күн бұрын

  • I drill a hole and use a roll pin with JB weld.

    @none-ih3cv@none-ih3cv20 күн бұрын

    • Ok friend, that's good idea

      @GausDIY@GausDIY19 күн бұрын

  • And the purpose of this was?!😅

    @MrKenf60@MrKenf6011 күн бұрын

  • Mil gracias Dios te bendiga🎉❤❤❤

    @joseluisaudelo3620@joseluisaudelo362016 күн бұрын

    • Hola nuevo amigo, un amigo lleno de amabilidad y cortesía, ¡deseo que siempre seas feliz!

      @GausDIY@GausDIY16 күн бұрын

  • Brazing, not welding. Though honestly this hardly even qualifies as soldering.

    @andreasand1327@andreasand132714 күн бұрын

  • I enjoyed this video.. I'll be waiting for next video .. i,e. Fixing a Broken heart.. 😢😢

    @Hyanlemspotlight@Hyanlemspotlight12 күн бұрын

    • Hello Bro! Wishing good things always come to you

      @GausDIY@GausDIY11 күн бұрын

  • I welding lang pala, Ang tanong ko anong related doon sa nilalagyan mo nang marker at nilagay mo Ang plastic cellophane pagka tapos tinanggal mo, anong naitulong doon sa marker mo???? Parang Wala yata sa tingin ko!!! Tapos sa huli welding lang pala.

    @aguilacons6323@aguilacons632311 күн бұрын

  • I'll never get back that time

    @MackenzieleeClement@MackenzieleeClement5 күн бұрын

  • Je ne suis pas étonné que les ingénieurs n'est pas investi leur temps qui coûte extrêmement cher ni investi dans les ressources nécessaires pour réparer une pièce qui a si peu de valeur

    @perrenoudlaurent5242@perrenoudlaurent524217 күн бұрын

  • Hattest du keinen richtigen Bohrer, und zeigst dann so einen wackeligen Murks mit einer Schraube, die beim Bohren hin und her taumelt? siehe ab 2:32

    @norbertk.1473@norbertk.147316 күн бұрын

  • Bello davvero.avete un' amico in più in Italy,Gianni.😊😊😊❤❤❤

    @giovannirazza9938@giovannirazza993818 күн бұрын

    • Ciao amico dall'Italia, ti auguro una splendida giornata ❤️❤️

      @GausDIY@GausDIY17 күн бұрын

  • Gave me a good laugh haha

    @demeneye@demeneye6 күн бұрын

  • That was a long road that leads to the Dustbin !

    @kafkastrial8650@kafkastrial865018 күн бұрын

  • Jajaja excelente video..... Y lo seguí hasta el final jajaja. 😅😅😅😅😅😅

    @robinsonsalinas1882@robinsonsalinas188219 күн бұрын

    • jaja, deseo que usted y su familia estén siempre seguros y felices. ¡muchas gracias!

      @GausDIY@GausDIY18 күн бұрын

  • That was priceless.

    @t.s.9656@t.s.965626 күн бұрын

  • You can't solder aluminium. Only Weld with a suitable device. Mounting the wire end in both parts is a nice idea in itself. Only then you would have to glue it with a vulcanising sealant or 2-component glue.

    @djantwan6155@djantwan615518 күн бұрын

    • Aluminium can be soldered with suitable solder and flux or abrading process

      @wilsonreay4752@wilsonreay475218 күн бұрын

  • Düşündüm ki,yeni nə isə öyrənərəm.Boş yerə vaxtımı sərf elədim.

    @ekremmelikov5100@ekremmelikov51009 күн бұрын

  • तुम्हारे लिए अच्छा बिजनेस है वेरी गुड

    @75897rajinderkumar@75897rajinderkumar27 күн бұрын

    • धन्यवाद आपका दिन अच्छा है!

      @GausDIY@GausDIY27 күн бұрын

  • What liquids did you use for that torch?

    @PresidentJace@PresidentJace8 күн бұрын

    • That liquid is gasoline and water

      @GausDIY@GausDIY7 күн бұрын

  • Waist time watching. This is a well known knowledge about broken aluminium, even the kids know it!

    @user-tl4dw9ut5b@user-tl4dw9ut5b18 күн бұрын

  • Fantastic that’s exactly how I would do it

    @petershelton7367@petershelton73675 күн бұрын

  • da stellt sich die frage was kostet der aufwand den zu hebel reparieren und was kostet ein neuer hebel und außerdem schweißt er das nicht mit einer 1,5 volt batterie sondern mit gas

    @Crazy-ui9ir@Crazy-ui9ir23 күн бұрын

    • bis zu ende schauen xD

      @radiosonde.online8164@radiosonde.online816419 күн бұрын

  • A couple of lolly pop sticks and sellotape would have been betterer😏

    @cheekycockneychappie9384@cheekycockneychappie938414 күн бұрын

  • Next time try fixing broken parts with a piece of chewed bubblegum. You’ll spend much less time, energy and resources and you’ll wind up with the same results as this. But for the sake of safety… don’t try to walk while you’re chewing the gum.

    @jakeeasterwood3204@jakeeasterwood320418 күн бұрын

  • Were there no soda cans available?

    @barrykennedy8760@barrykennedy876017 күн бұрын

  • Ficou bacana mandou muito bem

    @jbartesanal5876@jbartesanal587621 күн бұрын

  • What are the two liquids in the two bottles?

    @Fred.B@Fred.B24 күн бұрын

    • Бензин, и вода в качестве оннезатвора. Видимо денег на газовый баллончик не нашлось☝️😉

      @user-ys4nv3hu2k@user-ys4nv3hu2k24 күн бұрын

  • Just buy a new one. Many motorcycle owners change those to aftermarket parts and leave the original parts for stock. It can be bought at a cheap price less than the amount and time you spent for the diy torch.🤣🤣🤣

    @blackfleet1111@blackfleet111118 күн бұрын

  • انو خيي قديش حقا المسكة رح تعمل معمل كرمالا ما بتستاهل هلقد

    @aliassi991@aliassi99110 күн бұрын

  • حد يحجز لة عند دكتور لحسن الحالة تزيد

    @user-zl2tn8fr5r@user-zl2tn8fr5r22 күн бұрын

  • Schade um diese Zeit und Arbeit. Das dümmste was ich gesehen habe nach max.2 min.kann man abschalten.😅😅😂😂 weil nur scheiß raus kommt.

    @klecksberlin4290@klecksberlin42909 күн бұрын
KZhead