Making a 1/5 AWD V8 RC Car w/ MANUAL Gearbox! - Engine & Transmission Installation
2022 ж. 23 Қар.
6 184 647 Рет қаралды
►Get the engine here!
Toyan V8 engine ➜ bit.ly/3V14CG3
Toyan V8 Parts ➜ bit.ly/3ObRhZg
10 Must-have Engine Gift Guide➜ bit.ly/3TJDwCb
Other V8 engines ➜ bit.ly/3Li50KX
-------------------------------------------------------------------------------------------------------
I finally managed to get the v8 fitted to an AWD chassis with the manual transmission. The centrifugal clutch will be upgraded as this one cannot withstand the weight of the vehicle, it will just slip.
Also the universal joint on the engine's side must be improved as this one is quite flimsy.
-----------------------------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90
Your level of craftsmanship is incredible
Truth.
Especially if you take into account everything is 1/5 scale meaning all his measurement are millions of an inch
@@greatestevar well I have to disagree as someone who works in tool and dye we do everything in thousands of a inch as mm are to big
@@mikehughhawk wait until you hear about microns
@@HitLuca94 we were taught in micron but in Canada all the old school millwrights and tool and dye guys use thousands of an inch. But yes tell these kids about microns as that type of tolerances have even less room for error.
This is what I used to dream of when I was messing around with single cylinder, centrifugal clutch nitro's back in my teens. It's insane that this is now a reality - Every time Jonny makes something and it slots perfectly into place is like ASMR for me 😅
There is absolutely something mesmerizing about watching a master at their craft.
those are still around.
This is more than just a build. This is an artpiece. Brillant work Johnny, Bravo!
I'd call it jewlery
If you want art piece, look up Real Scale size ferrari... the guy went so far as to make a scale Ferrari down to even valves and valve springs, running gages and everything
😊😊😊😊
Someone needs to build a multi engine full size mini car. 2 v8s for each tire
Finally someone installed this thing on a chassis, getting kind of old watching people run them on a stand, this guy is an amazing machinist, thumbs up! 5 stars over and over, thanks for the video.
Every time I think this guy couldn't impress me more with his machining and engineering skills he does it again.
He stole tamiya transmission. He didn't invent anything here just stole the stuff from other makers.
@@droneman8998 wow. you seem upset.
@benjaminkriebel3569 not upset, just don't like when people say they invented something that they ordered online. It's actually pretty hilarious.Good day!
@@droneman8998 lol, nobody said anything about inventing anything.
@@ZJMK605 that’s what i’m saying lol
I didn't know there were legitimate scale engines in the RC world like this. This immediately has me imagining a true scale Corolla Trueno with a DOHC 4 cyl if one exists, rwd, a true scale represented drift car. I've seen the RC drift cars for years but electric doesn't excite me and nitro always sounded to annoying and loud. This actually sounded like a real engine but smaller. Wasn't annoying at all. I'm subbing!
Not sure about DOHC but there are small 4 cylinders out there for a while now.
@@MiGujack3 this v8 is already dohc
@@yuryv.2188 no it isn't. the other cam pulley is just idler wheel on these toyan engines and there's 1 camshaft under the valvecover :)
I know this feeling so well, I have the same feeling for motorcycles too that all 2strokes make the same annoying sound and 4stroke 2cylinders sound like worlds longest wet farts but 4cyl+ 4stroke bikes sound like heaven :)
I agree with everyone else’s remarks. Very cool and interesting/ entertaining to watch. I know there were many hard thinking hours put into it that us viewers got the luxury of not having, we just got to relax and view the coolness of it. Thank you for sharing with us.
So excited to see one of these motors actually put to use instead of sitting on a stand. Craftsmanship is incredible, watching the gearbox in action is mesmerizing!! :)
Your builds are the absolute best when it comes to these nitro rc's, always next level, incredible!
6:36, you need to secure the pneumatic fitting holding the bowden tube better. It can help with stringing and less retraction.
I’m amazed at the quality of your work. I am into racing RC boats and some of our guys put thousands of dollars into them in their works of art. This compares with them. It is beautiful. Can’t wait to see it run.
I love how a v8, no matter the size, just sounds like a v8. Even this small... it still sounds amazing
The RC industry is making massive leaps and bounds. In the last 5-8 years alone the new products are amazing. And those Toyan engines are getting better by the day. I remember being pressed by their early one and two cylinder engines. Now they have a V8. The industry has really given the advanced RC DIY guys a lot of cool options.
There was a model v8 20 years ago not sure what happened to it.
Beautiful work, Johnny! This thing looks like it'll be a blast once finished. Can't get over how good the engine sounds too.
😊😊
😊
😊
😊
😊
Awesome engineering and fabrication. Job well done. Can't wait to see it run on a track.
Brilliant editting. Easy to follow without a word needing to be said. And without taking 48hours to get through. Elegant excecution.
Never built one of these but have built plenty of off-road vehicles but I can totally respect the amount of time and craftsmanship that is involved to build these little guys. Really not any different than the full size version other than bigger. You have my respect there sir.
On of the best fabricators, designers, and builder’s on here. You do incredible work! Always excited to see what you do next.
@Jason that man literally made a custom v10 engine, what a legend
@Jason to be fair he did say "one of the best"
This was already a Roy Hobbs "The Natural" home run of a build. However, when you showed the inner workings of the gear box I was smitten. Fabulous work and keep em coming.
I really enjoy your videos and even more the passion involved in every single project. No words nor invasive music in the background... Just you and your magnificent piece of art. Just an awesome channel, keep it UP!
Glad you chose the RC car to put that in. You do amazing work, and I like watching your stuff. Can't wait to see the first run with that thing. Keep up the great work. Thanks
Wow Johnny! You have some amazing projects! Can’t wait to see the end results!
As always - top notch engineering, well filmed and nicely presented. Cheers! :)
The Sound and Working of the Machine just gives thrills. Awesome Work!!
this is another amazing creation & build. I look forward to seeing its use in the future.
I occasionally build stuff myself but your level is just incredible
Years ago I graduated from watchmaking school, and worked for sometime in that industry. I am really impressed by your attention to detail and skill.
These videos are so satisfying
The stuff that u do is incredible I wish I had the tools that u have u do really great work
All you guys that make these are artists. I am amazed at your ingenuity and dedication to perfection in your work. Well done!
Please do keep us posted that's an absolutely fantastic build you did
Love your builds. Can’t wait to see this monster rip down the road.
The videography, amazing parts fabrication, and creativity is astounding to me! 👀💛
Hi from jim in Australia. You're a mad man and a genius and I absolutely love it. The fact that you made your own 3-speed gearbox with reverse is mind-blowing and I cannot wait to see more of this project. Not to mention I can see that you're building this with off-the-shelf parts/slightly modified parts, you could make this something that followers could build at home. ❤
Couldn't get my eyes off the video even for a second. If I ever built this on my own I would go crazy with happiness
That looks and more over sounds incredible the amount of engineering skill put into this beast is mind blowing can't wait to see and hear it running! 🙂👌
This is amazing. I've been waiting for this and can't wait to see it on the road. I wonder what the gear box will do when you have pressure on the tires. Freakin awesome
We’ve been waiting for this can’t wait for the final results it looks like it will run great with that transmission 👌
Masterpiece of engineering! Best example of full functional RC I've ever seen.
Personally I woulda use a bearing for the driveshaft support! But all in all your level of detail and dedication is fantastic!
I love to see the craftsmanship. Awesome. And the model even works! 🙂
Talent, ability, vision, experience. All are obviously amazing and the sound of that V-8!!! Man-o-man!!
I'm speechless ! Extraordinary job, can't wait to see the finished car...
FINALLY!!! What your doing is art!! Please turbo or supercharge it next PLEASEEE
Twin turbo
This is so awesome! The only thing it's missing is a tiny turbo with a tiny super high pitch blow off valve haha! Great build, very impressive! 👏
Man I absolutely loved watching you build this rig. That is awesome!
Amazing man!! Really fantastic
Great project! That radiator shroud though!incredible flow!I am not sure about the dog engagment rings health after a few runs.they used to fail on race car even when they are hard steel-chrom.i believe they will need to be adressed as a steel parts soon.specially when the throttle-torque reductiom religns on manual controll(hand) Cheers! Keep the great projects coming!
Titanium
@@tanyav7888 This titanium revision is officially approved by me. Shit, let's get this out of the way now. All proposed revisions to replace any existing part material to titanium is hereby approved.
I'm extremely impressed with how well the transmission works I'm really curious how you designed and built it
Such an amazing and beautiful build. True skill, talent and engineering. That is in my opinion a work of art. Thank you for sharing. Would love to see the finished product and run. 👍
Cant wait for the finished product, keep up the good work
I would love this to be evolving into a multilink rearend, macpherson strut frontend, with ur own designed knuckles, suspension arms, and steering linkage. Also, making it an RWD with a gyro would be damn cool to see.
I dreamed of building this kind of stuff as a kid I just never knew how, wish I'd figured it out after watching your videos 🤣
I wish i had all the tools to do what you have done, this is truly amazing , cant wait to see you complete the build and make the test drive video
Amazing man! Truly inspiring to see the level you are working at! Definitely a beautiful car
Great work! It's amazing to see your work. I'm exited waiting to view the first run on the street. Go on man!!
Awesome work!
To me this is just an amazing piece. I just stumbled across this and said "Interesting how did he do that?" Would love to see this finished piece. May I ask what kind of CNC machine are you using?
This is just friggin AWESOME!! Dude you have gotta be super proud of all that time and effort that's gone into this build! Knowing you though this is just the start! To come is still.... brakes, suspension, hubs, just anything really that you can make stronger and better! 😁👍👍👍
That is so awesome, and a lot of thought and knowledge of the mechanics to execute it! Love it 😄
looks so cool, cant wait to see when it works what body are you going to put on it?
muscle car would be nice
Should make a different intake system for it, seems like just like the other engines the stock intake is more about looking the part then flowing much air
Amazing machine mate. I'd be super keen to see the finished running project!
Dude, that manual trans is amazing. Work of art
It's really beautiful to see! BUT, it's WAY too complicated to squeeze everything together on that small frame. which can work very nicely Serpent Viper 989 Nitro 1/8 RC car or 1/8 Serpent Viper 988 BUT that is no longer a sport you would say. regards Rob
For braking, why not installing a brake disc on the transmission after ther gearbox ? It will allow you to have a single brake for the four wheels easier to install
For someone who just got into the rc car hobby a year ago to a real miniature nitro engine that an authentic original handmade looking functioning like a freakin v8, transmission with gears,radiator, coolant reservoirs ... my mind is blown sir this is like art your craftsmanship is 🔥🔥🔥 this is my first time seeing this I have to go watch the other videos leading up to this and diff waiting to see the end of project.... wow
I think you rock Johnny. I Learn something new every video it would be nice to see some of the things that didn't go as planned. As Im sure we would learn even more. Thank you !
Noice
what if you make a small ctv transmission for an rc car
I'd love to, but I need to figure out how to make some parts what belt should I use, etc.
It will just explode. Tiny parts, way high rotational speeds and pressure. There is a reason all successful RC cars have simple designs. This thing is already way to complex and engineered wrong and will never work, or work well, or handle well, or be reliable.
Finally someone did it! I’ve been thinking this sense day one when I saw those engines. Nice work.
I dig it dude. My boy loves watching your videos. Downright gets upset if I watch em without him.
The sound of that motor is SICK!!!!
Now this is something called “GOD LEVEL DETAILING”
AWSUM Dude! had no idea that this tech was even out there, with the small V-8 engines that is. A real master piece with the transfer case and all, a true work of art.
Rc cars have come so Far! Great video mate!
Wow,can't wait to see it on the road running 😊😊
This is amazing man. I am subscribed. Love it!!!!!
No words to express this marvelous amazing piece of art creation you are definitely one of a kind !!! Fantastic perfection the best of all !
Wow... what a build !! Cant wait to see the specs when complete. Torque, rpm etc... wow. Sublime craftsmanship....
Loved your work keep making these types of videos
The fact this machine exists makes me grin ear to ear
I love these videos the craftsmanship is unbelievable very well put together keep it up!!
This is insane!!! I love it!!
Well done sir, can't wait to see the next installment.
Amazing craftsmanship
Amazing it sounds so real. Will love to hear it with pips. I have to follow this build.
I enjoy your videos so much and I don't even own any RC cars.. Maybe it's about time I get one 😄 The manufacture and assembly of the parts is just amazing! You rock dude! Keep up the good work, can't wait for the next video of this awesome car.. the engine sounds so good! I'd love to see you make a proper exhaust system for it also!
That's awesome bro, love the build well done mate.
Fantastic amazing precision engineering wonderful subscribed love the build really nicely done 👍
you sir got me addicted and you deserve a sub for QUALITY content
All it takes is know how and the right machines and you have that going for you. Bad ass, great job Johnny!
From your first to this video I can tell you've learned all kinds of new techniques you've really gotten great keep it up
Amazing ,got some skills and decent tools ,thanks for sharing
I'm ready for the next part. Amazing!
Your a genius man, amazing work
Amazing work as always!
Your quality of workmanship is outstanding. Nice result👏
This is masterpice, good work Johnny!
Just insane man.Thanks for sharing this with us.