►JLC3DP 3D Printing & CNC Machining Starts at $0.3, Sign Up Get $60 Coupons & Free Prototyping with X Resin : jlc3dp.com/?from=JohnnyQ90
►Toyan V8 engine ➜ bit.ly/3V14CG3
►Toyan V8 Parts ➜ bit.ly/3ObRhZg
►Other V8 engines ➜ bit.ly/3Li50KX
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90
I can't wait for the next episode DSG GEARBOX AND NOS 👀👀👀
Scale RC DSG Farts inbound
exept NOS wont work on nitromethane rc cars ^^
FYI. NOS is the name of a company that provides N2O systems you are referring to. We all know exactly what you meant. The first, fast and the furious movie, I believe made calling nitrous, NOS. N.O.S. Nitrous Oxide Systems. Check them out.
@@ParRagon-this is 4 stroke and it will work. In a 2 stroke application the nitrous would pass right through both ports not so with valves.
@@ThomasNygard-my9jt Yep
Yet more proof that no matter what size it is, a V8 with a supercharger will always sound awesome.
.....but never as good as a turbocharged V12
@@toolbaggers I mean, V12s in general just sound heavenly by nature, so there really isn't much competition there.
It fixes everything.
@@toolbaggers turbos muffle the good engine sounds
this super charger is so loud you can't really hear the engine anymore, kind of sadge
I don't like ads, but I do love the fact that you got sponsored!
Yeah, and as long as it's related to the subject and relevant to the video, I guess it's all right
The full size counterpart has teflon strips on the leading edge of the rotors to seal them against the case. Given your abilities and tools you maybe able to make something similar that would help with the rotor clash.
Exactly what I was thinking
not all do. its a option to have teflon on the rotors
The rotor slap needs to be addressed via fixing the slop in the blower’s gearset or changing some clearences. Teflon strips will only help performance
@@bigiron4018 I never considered that. I've never seen a blower with enough play in the gear set to cause it.
I really enjoy watching the problem-solving and quality engineering on this project. Great work!
Your machining skills are impeccable sir
Somebody: How many holes you need in base? JohnnyQ90: All😂😂
weight reduction
That compressor sure sounds awesome!
This channel just keeps getting better and better. Unbelievable craftsmanship!
I would have looked at gearbox from an HPi savage. The gears are metal from the factory, it has a 3 speed upgrade option and it’s already designed to be mounted between frame rails. I would have kept the slipper clutch, it takes the shock out of the gears on the upshift since there is no other place to allow slippage to soften the shock load.
18:14 - you only need brakes if you plan on slowing down. Never plan on slowing down. It's my motto...
You know whatd be cool? You make an old realistic model of like a 1970s charger or older muscle car and put that in there to make it a functioning model. Another thing is woth the rotary engines you should make a 13 rotor like the one made irl. Thatd be fukin awesome, id pay big money to see a minature 12 rotor😂
That's a 12 rotor or did he added another one?
@@CenReaper.No, i think he miss typed. It's still a 12 rotor. Lol
Very cool retrofit for the super-charger. Seems like you have a pretty good ratio on the drive.. very snappy! Just the fact that you now drive it off the back of the crank will most likely make it more reliable. Well done Johnny!😉👍👍
Have you ever considered selling these?
its gonna be like 20k minimum, the engine alone is like $5000 its ridiculous
@@PneumaticFrog The engine is at most 1500
I suspect he would onyl be able to do small comissions, he currently can't scale up and mass produce these things
Engine can be purchased online. Discounted price, shipped is around $1,200. Custom design and machine work PRICELESS!
For 10k of sure or not?😂😂
You so need to take it out to a parking lot for a quick rip! I love this project, and your machine skills are impressive, I hope that the blower doesn't shred itself and even worse your new motor to bits, keep it up brother all love!
I hate commercials but this one about JLC3DP was spot on...
That supercharger's tiny intake and exhaust ports are going to choke it. I guess the engine's tiny intake ports are also too small too. Maybe some CNC porting now that you have a broken engine to experiment with?
"The V8 RC car gets a Powerglide conversion" Fixed your title. Lol!
Love every video as I live vicariously through your skills!
Same I'm too busy to do any of this
With the amount of custom work you already have to do, you might as well use their engine as a template and make one yourself but better lol.
Right!!! I agree!!!
😍😍👋👋Thank you for including JLC3DP 3D Printing to the project! Really nice work!
But the add has some sound issues. I guess this is not what you expected
I'm seeing Toyan everywhere and they're freakin fascinating.
Amazing work! Some Teflon strips on the rotor lobes might be in order.
Quality as always Johnny.
there's more passion for engineering here than there is enjoyment for the hobby. i can completely understand and respect it 👌
Omg,with that supercharger on there,that thing is wicked quick! But you’re right, heard those rotors clanging against each other at speed and the rear tire closest to the camera isn’t balanced at ALL,the other one doesn’t seem that bad however! I LOVE watching this build Man! Well done so far!❤
I was like "No way it's going to whine" It whines, and sounds awesome! Nice job!
Good stuff! You should try a boost gauge on it, just to see what it's doing.
You'd have to have a very sensitive gauge for the tiny amount that would be putting out
I wish i had a machinist shop like you man i could do so much more things with my rc car
Once again, another awesome video. I love the effort you put into your builds. And the super charger sound is 👌
There is nothing you couldn't build. Mad respect
If you don't put a mad max themed body on this masterpiece I'll riot
Hahaha hell ya
Only problem is the motor is turned backwards.
I need someone with this skill to build a new differential for my Tamiya TRF414M2. I have been looking for years and I can't find one.
Jonny Q90, the man with the solution for all problems :D
Wow, this is super cool I really enjoy this kind of contest. Thank you.
As if this isn’t the coolest freaking thing in the history of the internet!😍
My day is complete
I think Robinson makes all metal gears for that TMaxx transmission, or use a summit trans , has hi and low and is built alot tougher
The supercharger whine seems louder than the engine lol! I love it!
So professional and amazing to watch 💪
There are some brake kits for 1/5 scale you could probably get ideas from. I ran hydraulic brakes on my mechatech but they also have cable actuated sets.
waiting for the day we'll see him building a RC car with a PDK gearbox
Ooh , that would be sick
This is literal art. ❤
Dude this is incredible love this type stuff, subscribed for sure!
Sounds wicked with the blower! Just awesome content as always.
Impressive! Well done 👍
I'm watching from Japan!
When you decide to use the reverse feature built in I highly advise you make very certain the car is at a full stop and at idle. I have trashed many reverse gears in my revo that I converted it to forward only with a center diff and then brushless. Also I eliminated first gear.
I also did this. The unplanned 1st gear delete mod is only good for powerglide skids in Aus burnout cars. 130+mph wheel speeds, with blown, methanol sucking 600-1200+HP, 1k+ torque V8s that skip first gear no worries are way off topic. Bed time 😅
Ever think about building a turbocharger? They make mini turbocharger keychains that are actually functional and rated for heat/flow. It's got a turbine housing, connected turbine and compressor wheels and everything. I think it'd be awesome.
Second this... Maybe not the keychain one unless they're already balanced and capable of tens of thousands of RPM. Might be quicker to find something else or start from scratch (which would be extremely involved and likely too difficult). All in all I'd love to see a miniature turbo V8 or even less cylinders in an RC car 😀
I need to research this, as it wouldn't surprise me if something already exists. I haven't been into RC cars since the 90s and therefore have limited knowledge of the past 25yrs progress.
A turbo that small might have to spin at a million rpm. A 2 liter engine already has 100k rpm turbo.
Can you remake the whole gearbox into metal? :)
I'm thinking of doing it, not just to strengthen it, but also make the gearing a little longer.
@@johnnyq90 do it :) please :)
I'm passionate about that competition whistling V8 engine 😂😂😂 very detailed 👍
I want to see a racing series with the Toyan V8s, it would be spectacular to see the smallest of small blocks on the race tracks of 🇬🇧.
Amazing work. Love it. 🤘
Wow, great job!
Nice idea on the transmission mounts
Love the quality as always.
LoL NICE ! Such a small engine with the sweet whine of a compressor where the noise matches absolutly to the size it has. Great 😁
All this precision work, bro make it look easy ...🙌
gotta love the name of the fueltank? seamless... hehe can see the line across the entire thing.
Insane man....... Love it!
A way to measure the output power with and without the supercharger could be interesting, maybe you could hook a motor and a variable load to do some basic testing. Nice work with the machining of the parts!
Bro this is nuts I absolutely love it.....❤
Good stuff man!
this is truly amazing!
17:53 I'm zoomed in on that unit 😊😊😊
Now you can recreate the Mad Max Interceptor!!! Great work
Only you can pull this off Johnny.
You should do a Q&A sometime. I would be interesting to see how you got into this. Was this a profession that turned into a hobby? etc. Great videos!
The dude has some awesome skills
Ah going down the same rought i did!. Great transmission. Using the same on my Howin L4 172 build.
Fabulous work.
Been watching since the micro turbine days, everytime I see a new vid in my feed I instantly click and watch. Keep up the great work! Would love to see a lathe tour at some point as I have been considering getting one
Revo is a great transmission.. won't survive your v 8 torque unless you leave some slipnin the clutch. Good luck keeping that consistent.
Duuuude! You and your channel are sooo amazing❤😊
I'm so glad you addressed the wonky wheels because it has been BUGGING me
You can hear the little Supercharger whining its ass off😂👏👌
traxxas revo transmission is pretty fragile when going to forward to reverse and abusive driving
As long as I do it gently, it should hold up for a couple of videos 😂
@@johnnyq90 broke my revos transmission like 5 times
LOVE your videos.. I even watched the advertisements in it.
Fricken brilliant
I think it would be cool seeing you try to make an auto yourself like that sequential 3 speed you did. Could call it the 'microglide' playing off of gm's powerglide.
A good real full size super charger has one groove cut length ways down the very top of each rotor blade with a teflon strip inserted into the groove cut slightly protruding pass the edge of the top of the rotor blade so it help center the rotor in the case as it turns and protects the case from metal to metal scarring and it also helps provide a better seal as the blade turns which means better boost and more power to the engine. Signed Carl J. Anderson
Haha. That "binding" is the clearance of the rotors sealing.... all that work to reduce the efficiency of the blower.
Be nice to see this out n about irl.
rolling road and all go ahead you legend
When working to trim plastic, skip the barrel sander and get a carbide end. Creates smooth cut and not a melted headache.
quality as always!Look forward to next episode😇
I have to say I thought that was gonna be a low gear ratio but seeing how fast it takes off i cant imagine a 3.00:1 ratio
Awesome handiwork my friend- Very competent, One question, what wheels & tyres you using pls
You better take that motor completely apart, as you probably introduced metal shavings because of the rotors banging!
You added Hellcat Red-eye Whine to it xD I am also worried about the rotor slap in the supercharger, even if they bed into each other all that metal is going straight into your combustion chambers and probably hurting the pistons a bit :\
Love that it started to make a real blower sound. Would greatly improve performance with modern style Hihelix rotors whether they be interference or not. And making sure if they do you have a decent coating of fuel along the whole rotor. Same as what we do full scale on our 6 and 871 blown race boats haha
I'd love to see some helical rotors on the blower, maybe that'd fix the issue, The bearing tolerances also seem pretty loose.
I believed you need to take a look at the seating if the bearings on that supercharger !
Epic as always!!!
A while back, I had a 1/5 scale FG clone I wish I could have done all of this to. If there is a way to cycle oil through the system to keep that supercharger from eating itself, that thing is going to be a beast. Looking forward to seeing the progress
One of these days hell get a rc car big enough for the entire family 😂
Have you ever considered building a Dyno for testing your amazing engine work and performance upgrades? I’m sure it can be done in scale from 1:1 versions?
I think I put in a 3 speed auto in my savage. They are adjustable for shift points too
If this thing had an oil pan it would be full of confetti
I'm not entirely sure the added power and throttle response was caused by any sort of boost. It may of been because surface tension causing fuel to stick to the rotors until its reached high enough rpm to sling the fuel off causing it to burn giving more power. Awesome video and I love all your stuff.