KZhead
Тәжірибелік нұсқаулар және стиль

How to make your resin crafts like a glass clear

Cre_Arth
2019 ж. 9 Қыр.
2 965 764 Рет қаралды
Жүктеу

Finishing the clear resin using wax turtle.
Other video :
Resin cast figure • Silicone mold and resi...
#Resin
#Cre_Arth

Пікірлер

  • Been working with resin for years and finally someone is gracious enough to share the finishing process. THANKS - I typed out the steps with items you need to pick up: AA 150 sandpaper 240 sandpaper C 800 grit sandpaper wet with water and dish soap P 1000 grit sandpaper wet with water and dish soap Turtle Wax Rubbing compound Turtle Wax Polishing compound

    @sandyclements5315@sandyclements53153 жыл бұрын

    • Thanks to u

      @CreArth@CreArth3 жыл бұрын

    • What is with the letters on the sandpaper

      @blakeS819@blakeS8193 жыл бұрын

    • Thank you!!

      @divinitydiaz2303@divinitydiaz23033 жыл бұрын

    • THANK YOU!!!

      @ms.carter1296@ms.carter12963 жыл бұрын

    • So we just can't use turtle wax only..we have to go through the process?

      @MYMcrafts@MYMcrafts3 жыл бұрын

  • I know this is an older video, I just wanted to thank you for it! So many of the sanding and polishing resin videos use power tools. I'm just a small-time crafter and this is exactly what I needed, so thank you!!

    @kili5562@kili55624 жыл бұрын

    • SAME.

      @TigressCalliope@TigressCalliope Жыл бұрын

  • My arthritic finger hurt just watching them hands. Good job.

    @audreygullas8728@audreygullas87283 жыл бұрын

    • 'Their' hands

      @rajeshshree145@rajeshshree1452 жыл бұрын

    • Lol

      @artastinoble4214@artastinoble42142 жыл бұрын

  • You are right to the point, no beating around the B******* bush, Iv’e looked at like 10 vids and they all did the same mistakes, no info on what they are doing or why, no description of materials for whatever reason or even show how to do the job. A video I watched before this one claimed to show how to polish resin, NOPE, legit just some guy talking about his rotary tool without using it. You showed everything required in stages, no cuts, how is that so difficult for those other fools, thank you so much!

    @robawsome@robawsome4 жыл бұрын

    • Super jolie le produit s appelle comment

      @miriame1979@miriame19793 жыл бұрын

    • It didn't work for me kind of disappointed

      @HFDay-qi6yc@HFDay-qi6yc3 жыл бұрын

    • There's full description on this video

      @electricbrain1736@electricbrain17363 жыл бұрын

    • @@HFDay-qi6yc you can always try to brush a verry thin coat of the same epoxy on it

      @nicosteps715@nicosteps7153 жыл бұрын

  • Just a warning that it’s a good idea to dip your resin item in water while sanding because the dust isn’t good to breathe in!

    @jackiehall4181@jackiehall41813 жыл бұрын

    • Thats why I where a repitory breather its just sare I do the same when I work with rewind 3d printing

      @lennerttemmerman@lennerttemmerman3 жыл бұрын

    • Thanks for the tip!

      @gameboyv1790@gameboyv1790 Жыл бұрын

    • 299 like let me change that(chain)

      @ridhaandisoza1968@ridhaandisoza196811 ай бұрын

  • Thank you... one of the best and clearest videos on the topic... no bs, no babble, no ‘you have to have this powertool’ nonsense. Cheers!

    @makkanan@makkanan3 жыл бұрын

  • I saw another video on resin that had a very short polishing part, where they showed four separate numbers down in the corner, but didn't explain what they were for, and it was sped up. This is the FIRST video that lets me understand what the numbers were - it was the grit of the sandpaper. This is the first video I've found that clearly shows what to do and what products you use. Newbie here, so thank you so much for your help and clear instructions without ever saying anything.

    @samanthacastleberry6341@samanthacastleberry63414 жыл бұрын

  • I've never seen that before, it looks like glass. Thank you for sharing this amazing result!!!!!

    @ShanaCali@ShanaCali4 жыл бұрын

  • OMG THANK YOU!!! This is exactly the issue I needed solved. thank you so much. They seem to keep getting tiny little fuzz particles in some of my resin coasters and I was trying to find a way to sand it down just a little bit and then polish it without having to add a whole another coat of epoxy. THANK YOU!!!!!

    @korysmith6513@korysmith6513 Жыл бұрын

  • First video I have found that actually helped me figure out how to sand and polish my pieces. Thank you!

    @creativecountrygirl@creativecountrygirl4 жыл бұрын

  • Thank you so much for showing the entire process, albeit sped up. I bought a different plastic polish to fish some resin pieces that have imperfect surfaces and it didn’t seem to do diddly squat even with proper sanding. I’m going to try the turtle wax ones now!

    @silivrengamer@silivrengamer Жыл бұрын

  • Could you let me know how long you sand for or what you are looking for before you stop at each stage? Thanks for the video, I’m thinking a timer might be a useful addition. Please let me know. 👍

    @shonesurendran5337@shonesurendran53374 жыл бұрын

  • I use a buff on perspex as is melts the surface slightly but metal polish is really good too!

    @PrinceWesterburg@PrinceWesterburg3 жыл бұрын

  • I guess now it’s time for you to take a nap. Thanks for sharing. Good info

    @georgesheptak5657@georgesheptak56574 жыл бұрын

    • 🙏🙏👍👍👍

      @CreArth@CreArth4 жыл бұрын

  • Nice! Thank you for sharing!

    @toaareai5698@toaareai56984 жыл бұрын

  • yay finally a solution to have true clear resin

    @xmlstudios@xmlstudios3 жыл бұрын

  • Can you also use this process with bigger resin products like for lamp resin when you don't have the machine?

    @rmcrtz1359@rmcrtz13593 жыл бұрын

  • Is it this specific brand of rubbing/polishing that works well with epoxy resin or can you use most kinds of rubbing/polishing compounds? Very new to this!

    @chloeweathington7809@chloeweathington78093 жыл бұрын

    • u can used other brand

      @CreArth@CreArth3 жыл бұрын

  • I don’t know much but is it necessary to use different kinds of sandpaper? or is that optional. Also what kind of polish to I use ?

    @mn_cldhiguera4794@mn_cldhiguera47943 жыл бұрын

  • Rapaz, isso dá trabalho, mas o resultado é muito bom. Parabéns.

    @aledrine@aledrine3 жыл бұрын

  • Akhirnya nemu juga tutorial yang ngga pake mesin, thx video nya bang, sangat bermanfaat.

    @muhamadyusuf3270@muhamadyusuf32703 жыл бұрын

    • siapp

      @CreArth@CreArth3 жыл бұрын

  • It seems that making them by hand does not achieve a certain level of smoothness, there are still quite a few scratches that we can see in the backlit position. But nonetheless it is quite good without supportive devices!

    @WoodWorkingArtCraft@WoodWorkingArtCraft3 жыл бұрын

  • Thanks. It is a very helpful video for beginners like me

    @sidhubanerjee1990@sidhubanerjee19904 жыл бұрын

  • will it be crystal clear at the end? like when the resin dries and its as clear as that?

    @kooneho4083@kooneho40833 жыл бұрын

  • Esto podría resultar para el visor de un casco? Pregunto porque parece ser el mismo material Buen video!

    @alejoforero6552@alejoforero65524 жыл бұрын

  • I'm making something for my wife out of epoxy resin, and I was wondering how long do you sand with one grit before moving on to the next grit? Also, would it be alright to start with 320 grit? Thank you!

    @sirdusti@sirdusti3 жыл бұрын

    • P

      @joseramoncamejosilva6099@joseramoncamejosilva60992 жыл бұрын

    • You will know by each grit by seeing a consistant and distinctive sheen after using each grit. Remember its autobody paper so lets say 600 grit will be 600 stones per inch akd 800grit will be 800 stones per inch and so on.

      @brycer985@brycer985 Жыл бұрын

  • capek juga bikin bening, tapi yang penting hasilnya dapet. thanks 👍

    @watanglipuhadjar2654@watanglipuhadjar26544 жыл бұрын

  • Thank you for sharing such a simple guide in polishing resin into like a glass you are truly helpful and wonderful ^^

    @christiangab1227@christiangab12273 жыл бұрын

    • U are welcome

      @CreArth@CreArth3 жыл бұрын

  • Could you use this method to polish a scratched plastic crystal on a swatch watch?

    @p.k.carlson6646@p.k.carlson66464 жыл бұрын

  • after sanding and everything what would happen if you were to spray it with clear coat? instead of using the turtle wax and polishing compound?

    @Glebean@Glebean3 жыл бұрын

  • Thank you! Couldn't figure out which polish to get!

    @darwinfishstix@darwinfishstix3 жыл бұрын

  • I have all the grits and the rubbing compound except for the last polishing compound, will it still be clear or shiny if I don't use the last one?

    @jameslangpok2166@jameslangpok21663 жыл бұрын

  • Amazing job 💞 thanks for the advices

    @zettip2497@zettip24972 жыл бұрын

  • Any metal polish can be used

    @pijnto@pijnto4 жыл бұрын

  • Good on you man! That is a lot of work!

    @ganou.doodles@ganou.doodles3 жыл бұрын

  • Really Amazing work. Just wondering, How do you know that now it's time to change the grit??

    @vishalchoudhary3950@vishalchoudhary39503 жыл бұрын

  • What does the P stand for in P1000 grit? Is it a specific type of abrasive paper I need? Thanks for the video!

    @lisha5370@lisha53703 жыл бұрын

    • Particle

      @no_one6749@no_one67493 жыл бұрын

  • Hello, I am in Argentina and I would like to know what they put on the end of the sanding work so that it is so shiny, thank you

    @tcdisenos1312@tcdisenos13123 жыл бұрын

  • Can i use this resin without a pressure pot? I don't have the space for one

    @caity518@caity5183 жыл бұрын

  • What grit are you using for both sand papers?

    @Americanfoodreviews@Americanfoodreviews3 жыл бұрын

  • could you use the turtle wax ect after using a dremol 300 sander or do you have to use your sanding technique for this result

    @elliehopgood9163@elliehopgood91633 жыл бұрын

    • i tried this , the wax actually dulls the shine

      @ChunkyPokemonTime@ChunkyPokemonTime3 жыл бұрын

    • I usually wet sand up to 1500 grit then start polishing

      @nickbisson8243@nickbisson82433 жыл бұрын

  • Gracias muy bonito te queda👍

    @damarysclaudio7877@damarysclaudio78773 жыл бұрын

  • Very Good. I always seen when they hurry or yack too much. I just love how you have done it. Thank You

    @user-lc5zz6sx4l@user-lc5zz6sx4l2 ай бұрын

  • Can u please tell me which polishing compound is best for resin jewellery art

    @artmania3961@artmania39612 жыл бұрын

  • Is there a particular type of cloth you are using to rub the turtle wax in? or is that just simple microfiber cloth?

    @TheZombieTroll@TheZombieTroll4 жыл бұрын

  • Can this be done with any brand of epoxy resin? I'm gonna start a project with East Coast resin as it's the cheapest I can find in a gallon for my lamps I'll be making. Thanks for showing the actual polishing products you use!

    @kaitlinreichert606@kaitlinreichert6063 жыл бұрын

    • This can be done with almost anything. It works with metal, plastics, paint and also printed stuff. This is a common method to get a mirror shine.

      @koyaanisqatsi316@koyaanisqatsi3163 жыл бұрын

  • Super useful thanks a-lot. This solved my issue with foggy lenses on my Binoculars…

    @TheSepli@TheSepli Жыл бұрын

  • Hi I'm having this problem when I demoed the inner part is dual can I spray the mold with something shiny or spray the whole thing with an acrylic spray

    @trayjones84@trayjones842 жыл бұрын

  • Hi, I used Turtle Wax Polishing Compound on a piece of resin. I applied it with Dremel and my results are not what I expected. My piece is now cloudy. It was shiny and clear when I started. Any thoughts? Thank you.

    @zemljomojajadna@zemljomojajadna3 жыл бұрын

    • Same here did you figure it out?

      @jacobmontes2330@jacobmontes2330 Жыл бұрын

    • Using a Drexel to speed up the process is not really a good idea - this guy never used one and got those results. I know because I tried using a Dremel to polish a digital watch plastic display. Never really became glass clear and had concave pits. The key to this process is understanding that one is turning mountains into molehills in a uniform manner on the surface one is polishing. That being said, it’s GO BIG, go manual or go home

      @asakayosapro@asakayosapro Жыл бұрын

  • Gracias!! 😊 Saludos desde Monterrey Nuevo León México!..🤗

    @daliacarrillo5568@daliacarrillo55683 жыл бұрын

    • Hola

      @Michi830Mx@Michi830Mx3 жыл бұрын

  • This is really nice... is there a way to do it that is faster/not as labor intensive for hands/wrists? I have issues with the nerves in my hands and arms and don't know if I'd be able to do this :( can I use electric sander just as well?

    @Lillith9008@Lillith90083 жыл бұрын

    • Of course you can use tools instead, and depending on where you start, you might need to only use the last steps of sanding. If you have deeper cuts you want to remove entirely, you need to start from the bottom with the coarsest sandpaper first, that saves time. Then work your way up to the finest. I use polishing paste instead of turtle wax, you get them in different grids and most importantly it leaves no residue so I can glue bits together afterwards and it will stick.

      @sandcastle2069@sandcastle2069 Жыл бұрын

    • ​@@sandcastle2069if i use sand paper and polishing wax it will work or not?

      @mivlogs9306@mivlogs9306 Жыл бұрын

    • @@sandcastle2069 thank you for this very helpful tip !

      @britt_bh2021@britt_bh20218 ай бұрын

  • Me puso hasta la madre tu pranganez, eso de utilizar pedaceria de hojas de lija...

    @pablomunoz7041@pablomunoz70414 жыл бұрын

  • I have done very similar with Woodglut designs.

    @shantahsieh4833@shantahsieh48332 жыл бұрын

    • What is the name of chemical in which he is putting green liquid

      @chsohaib423@chsohaib4238 ай бұрын

  • Dá pra fazer assim com a lente dos óculos

    @edinaldopereirabarros205@edinaldopereirabarros2054 жыл бұрын

  • do you have to do anything else to where as a pendant?

    @hopelynnd@hopelynnd3 жыл бұрын

  • Epoxy resin kis shop sa milti ha???

    @muhammadnuwaz379@muhammadnuwaz3793 жыл бұрын

  • How long does it last?

    @JoshuaJFingal@JoshuaJFingal4 жыл бұрын

  • Thanks for making the video 👍 Will this work on Epoxy resin?

    @sadqazaria4167@sadqazaria41673 жыл бұрын

  • I have seen a lot of polishing videos for resin, only this one is helpful for me, availble tools and simple way thanks

    @waleedahmad8243@waleedahmad82434 жыл бұрын

    • 🙏🙏🙏👍

      @CreArth@CreArth4 жыл бұрын

  • Thanks for this informative video..But have you used sand paper for rubbing?

    @zoonahawan@zoonahawan3 жыл бұрын

  • Thank you so much for sharing!!

    @lnc-to4ku@lnc-to4ku3 жыл бұрын

  • Is there anyway to achieve this clear effect while remaining the raw textures on the resin?

    @2809kean@2809kean3 жыл бұрын

    • Use a shiny mold vs a matte one. If the silicone on the inside is shiny then the whole piece will come out shiny and all of this is completely unnecessary. If the inside of the mold is matte/no shine then it will come out dull like this and require sanding/polishing. Usually molds come shiny by default and only get dull over time

      @SoullessMermaidGames@SoullessMermaidGames3 жыл бұрын

  • Maravilloso! Me preguntaba donde podria conseguir esos pulidores Turtle o algo similar y accesible. Saludos desde Chile

    @sha-to964@sha-to9643 жыл бұрын

    • Acho que sim

      @emiragastounioti8064@emiragastounioti80642 жыл бұрын

  • Itu d kasih air biasa pa air sabun gan ? Sama da jnis resin anti gores g bt pelapisan sangaaat tipis ?....

    @HeriSusanto-ex6de@HeriSusanto-ex6de3 жыл бұрын

  • Good job thanks for sharing

    @cachhomevideo1546@cachhomevideo15464 жыл бұрын

  • and what u do with a comlex figure?

    @calleblomquist@calleblomquist3 жыл бұрын

  • Awesome! Thanks for the video!

    @NewvillageArt@NewvillageArt3 жыл бұрын

  • Regmar kitne kitne number ka use kiya.

    @mangturam9465@mangturam94654 жыл бұрын

  • Cuantos minutos empleas en pulir la pieza por favor? Para que te de ese brillo?. Gracias

    @minsalekyese@minsalekyese3 жыл бұрын

  • Can you also dye resin like red?

    @ResidentEvilReVerseUniverse@ResidentEvilReVerseUniverse3 жыл бұрын

  • Muito bom perfeito 👍👌👏👏👏

    @walbermorais7194@walbermorais71943 жыл бұрын

  • What kind fo cloth/towel did you use?"

    @nicolebarsi2411@nicolebarsi24113 жыл бұрын

    • Thats sand paper

      @annaloaces1813@annaloaces18133 жыл бұрын

    • Sand paper

      @gokuls7518@gokuls75183 жыл бұрын

  • Can i Buy in mercado libre?

    @lsd9287@lsd92874 жыл бұрын

  • Since the video is sped up a bit, I was curious as to how long you will sand each side for? Any specific length of time? Also, I'm curious about why you jumped from 240 up to 800. I always heard Polishing needed a Gradual Increase.

    @khione8044@khione80444 жыл бұрын

    • True, and p1500 and p 2000 also exist

      @reconnectdoo3194@reconnectdoo31943 жыл бұрын

    • It’s all about the time you are willing to use and what you have at hand. Jumping steps only means you have to work twice as much with the next sandpaper.

      @sandcastle2069@sandcastle2069 Жыл бұрын

  • does it work for color epoxy resin?

    @magallanthepenguin9132@magallanthepenguin9132 Жыл бұрын

  • 👏🏻👏🏻👏🏻👏🏻 Gracias! Realmente interesante!😉👍🏻

    @hilandoelhilo5084@hilandoelhilo50844 жыл бұрын

    • 👍👍👍 Gracias.

      @CreArth@CreArth4 жыл бұрын

  • So helpful! Anyway, can I replace the C800 ? So difficult to find it in my country. What is your suggestion? Thank you..

    @christinaa6190@christinaa61903 жыл бұрын

    • Amazon

      @Sbdj3@Sbdj33 жыл бұрын

  • untuk kreasi seperti itu.. pakai resin bening atau resin yang keruh??

    @rohman_njs1155@rohman_njs11554 жыл бұрын

    • Resin Bening mas

      @CreArth@CreArth4 жыл бұрын

  • I tried by sanding from 150 grit to 7000 grit with machine. But still cloudy 😢. Any suggestion would be appreciated.

    @khaingmyomyathtut8093@khaingmyomyathtut80933 жыл бұрын

  • Wat bout the markes which was came use of regmark

    @komalkaur1414@komalkaur14144 жыл бұрын

  • Would this work if you used only the polishing compound? Or must you use the rubbing compound first?

    @jordanmcquoid9161@jordanmcquoid91614 жыл бұрын

    • HE LOOK LIKE AN IDIOT TO YOU? Y WOULD HE NOT DO THT WAY IF IT WAS POSSIBLE

      @Yukam1912@Yukam19124 жыл бұрын

    • I dunno. You sound like an idiot... yet you still leave comments!

      @hapgrinzal6128@hapgrinzal61284 жыл бұрын

    • Ow

      @gagerountree@gagerountree4 жыл бұрын

    • If I don't have the rubbing compound can I still achieve your results using just the polishing compound after the sanding? Thanks for this video, I tried without success using 80, 120, 320 dry and 400, 800, 1000, 2000, 3000 wet and polishing compound. Did not use soap and considerably less water. I will be giving your method a try without the rubbing compound due to being quarantined.

      @jillboehm-reyna834@jillboehm-reyna8344 жыл бұрын

    • @@jillboehm-reyna834 so the sanding doesnt work? Ive been sanding this one piece a lot and it looks a bit worse and cloudy than when i first started

      @inkylumine8967@inkylumine89674 жыл бұрын

  • oye me gustaría saber si también se puede utulizar esta técnica para el acrílico superior de mi Auto Smart que es oscuro.

    @luisalfonsogomezponce6352@luisalfonsogomezponce63524 жыл бұрын

  • Excuse me, what is the function of each of the 2 products you use?

    @alejandroceballos1646@alejandroceballos16463 жыл бұрын

  • Esta excelente el video se puede a mano por que la mayoria sube pero con maquinas.

    @JorgeReyesArt@JorgeReyesArt3 жыл бұрын

  • Please What resin you use Epoxy or polyester?

    @orcaidea6950@orcaidea69504 жыл бұрын

    • I use polyester resin

      @CreArth@CreArth4 жыл бұрын

    • @@CreArth Thank you so much 😇😇😇

      @orcaidea6950@orcaidea69504 жыл бұрын

    • What is the difference ,?

      @f_society9151@f_society91513 жыл бұрын

  • Wow thats awesome but definitely a process

    @jeridawnchamberlain7327@jeridawnchamberlain73273 жыл бұрын

  • would you please teach us how to make an epoxy using handsoap and glitter

    @rhinanchloe7553@rhinanchloe75533 жыл бұрын

  • 3D printed resin or mixed and poured?

    @dungeonsdoodads4306@dungeonsdoodads43063 жыл бұрын

  • Wow good amazing 👏

    @TV-se4ce@TV-se4ce3 жыл бұрын

  • Can risin epoxy become a window glass?

    @shemshem1649@shemshem16493 жыл бұрын

    • of course

      @CreArth@CreArth3 жыл бұрын

  • Thank you for pinning what you use in this process 🙏💜💜

    @SS-ig7iu@SS-ig7iu2 жыл бұрын

  • 👍 résultat parfait.

    @nounouberbez@nounouberbez4 жыл бұрын

  • Is possible to buy this Rubbish e Polishing in Italy? Thank you

    @MondoRockGP@MondoRockGP4 жыл бұрын

  • Hola: muy interesante el vídeo, pero alguien me puede indicar el equivalente de los productos utilizados al finalizar aquí en España. Muchas gracias.

    @celsogarrido7060@celsogarrido70604 жыл бұрын

    • Hola. Lo mismo me pregunto yo.. lo has averiguado?

      @mariasirlene8981@mariasirlene89813 жыл бұрын

  • Kalo misal langsung di semprot clear jadi ga ya?

    @bararesamudra3920@bararesamudra39204 жыл бұрын

  • both compound rubbing and polishing to use?? or any 1 is ok??

    @kajalp9053@kajalp90533 жыл бұрын

    • please reply??

      @kajalp9053@kajalp90533 жыл бұрын

    • just use polishing its ok for finish,, but with the compound rubbing will be better

      @CreArth@CreArth3 жыл бұрын

    • thanx for reply and can't we use just 1sand paper or using all is necessary ?

      @kajalp9053@kajalp90533 жыл бұрын

  • Can use on scratched dvd o CD?

    @rodrigogonzalez9895@rodrigogonzalez98953 жыл бұрын

  • I wonder if it would take the yellowing off the piece after a couple years?

    @michgo4226@michgo422611 ай бұрын

  • Can I use 150; 220; 320; 400; 600; 1000; sandpaper?? Please reply 🙏🏻

    @parishmitachoudhury5995@parishmitachoudhury59953 жыл бұрын

  • It's great . Which kind of Polyester did you used ? . PET , PBT , RYNITE , or which one ?

    @josearturomartinez2489@josearturomartinez24894 жыл бұрын

    • UPR

      @CreArth@CreArth4 жыл бұрын
KZhead