Will this SUV go 200mph or more with a 0.5L engine? Enjoy! Map: www.beamng.com/resources/ssrb... #beamng #turbo #3cylinder #forgottenmustard #beamngdrive #experiment
Пікірлер
It will build boost in 2-3 business days
@will.dornon2 жыл бұрын
Public holidays and weekends not included.
@midlifeparty2 жыл бұрын
😂😂😂😂
@mrgio-x5302 жыл бұрын
It didn't have a problem building boost, but the engine is too small to take advantage of the extra airflow. If you watch the boost gauge, it hardly even fell out of boost. Boost pressure is just a measure of restriction and one part of the equation.
@208Concepts2 жыл бұрын
@@208Concepts but a 500cc spooling a turbo capable of this much boost doesnt seem realistic tho. At this boost this engine would be pneumatic lol.
@midlifeparty2 жыл бұрын
@@midlifeparty it most definitely is not realistic 🤣
@208Concepts2 жыл бұрын
If this engine was real, I can't even imagine what it would go through with such boost numbers... Even 15PSI seems too much for it.
@rayboccino51742 жыл бұрын
no shit sherlock
@XTheRedKiller2 жыл бұрын
Fr, 500 psi like bruh those cylinders gone by just reaching 20 Psi. But that isn't that weird since theres a 80 psi 4 cylinder Eclipse
@markjf__2 жыл бұрын
@@markjf__ If I am not mistaken, there are diesel dragsters running 150-200 pounds of pounds of boost that somehow don't (always) explode. The forces at play on the rotating assembly are hard to comprehend.
@Teesquared002 жыл бұрын
@@markjf__ who's eclipse are you talking about? I had a buddy we had his on the dyno, it was an awd 4cyl with methanol injection and a home made turbo. I remember it was 768hp at the wheels. We had gotten that thing to the point that even with the best arp studs our performance issue was that the studs were stretching at wide open throttle and coolant was getting past the head gasket. When I left the project they were going to try a different turbo to see if they could get more power just from making a more efficient turbo but they really were at the end of possibility for that block. They were going to switch it over to the V6 but I never saw it happen
@connorclucas2 жыл бұрын
I feel like even that was in the high 30s and not 80 psi. That was a actually drivable semi reliable engine though and not a track engine that was going to get rebuilt after every pass tho. I believe you could get 80 psi for a couple of runs out of an engine like that but I don't know why you would
@connorclucas2 жыл бұрын
"So what's the 0-60?" "It has one." "Yeah, but what is it?" "Idk, we haven't hit it yet."
@lilsmoot44882 жыл бұрын
We think it has one. Not sure though as we are still in 1st gear after an hour
@jacobhinger50392 жыл бұрын
5:44 VTEC YO!
@M_A_R_I_N_E7852 жыл бұрын
Honda drivers at 3AM
@KitKitChanIsaac2 жыл бұрын
@@KitKitChanIsaac 😂 so true
@M_A_R_I_N_E7852 жыл бұрын
It's kind of interesting that the engine was able to run at those higher boost pressures. I was kind of expecting the engine to stall out from the air only being able to compress so much before it starts to air-pillow, or act like an air-spring in an air suspension system.
@ChrisRand-gf7lz2 жыл бұрын
That's a great fucking question
@markcolt11142 жыл бұрын
I guess, in beamNg no
@ciprianoravet2 жыл бұрын
Irl, there would be a compression ratio that would cause that to happen, BUT it wouldn't be as low as you might think. Gotta remember, atleast one of the other pistons is providing the force required to fully compress and ignite the air/fuel in any other piston, and full boost is usually achieved at full power, so there wouldn't be a lack of power at lower rpm, because there wouldn't be enough boost to create an air pillow. Just off the top of my head, I belive that it would be nearly impossible to create such a scenario (factors such as the strength of engine components and turbo size/exhaust flow are up to par) for simply that reason More power is created by the last cylinder(s) firing than is required to compres the air/fuel to the point of ignition, at any point of the Rev range. Though, there has to be some extremely high compression ratio, like unwordly high, that would create some other scenario.( a fucking black hole?) Or something that science had observed or considered. Although that would be impossible with today's technology, and prolly future technology. Like how strong of a engine would you need to withstand a compression ratio of, say, 1400^3/1? All of that is speculation though, as I am a highschool student with no prior experience in any form of physics or whatever else would help explain the workings of such a scenario
@3ch0_172 жыл бұрын
Irl, there would be a compression ratio that would cause that to happen, BUT it wouldn't be as low as you might think. Gotta remember, atleast one of the other pistons is providing the force required to fully compress and ignite the air/fuel in any other piston, and full boost is usually achieved at full power, so there wouldn't be a lack of power at lower rpm, because there wouldn't be enough boost to create an air pillow. Just off the top of my head, I belive that it would be nearly impossible to create such a scenario (factors such as the strength of engine components and turbo size/exhaust flow are up to par) for simply that reason More power is created by the last cylinder(s) firing than is required to compres the air/fuel to the point of ignition, at any point of the Rev range. Though, there has to be some extremely high compression ratio, like unwordly high, that would create some other scenario.( a fucking black hole?) Or something that science had observed or considered. Although that would be impossible with today's technology, and prolly future technology. Like how strong of a engine would you need to withstand a compression ratio of, say, 1400^3/1? All of that is speculation though, as I am a highschool student with no prior experience in any form of physics or whatever else would help explain the workings of such a scenario
@3ch0_172 жыл бұрын
Well of course there we're mods installed to not absolutely obliterate the engine. If there would be no mods, this thing probably would have thrown a rod at 15 psi
@gopanski53302 жыл бұрын
I like the fact that we're starting at 50psi
@hpcarthech43872 жыл бұрын
So, a .5L 3 banger running approximately 100 pounds of boost has approximately the same power as the car did stock? Cool
@3ch0_172 жыл бұрын
Yeah because his turbo wasn't getting full potential till 4th gear, for a turbo to spin it requires torque and rpm. Turbo lag is a true killer, if this had antilag it would be a beast
@brandonlunn52610 ай бұрын
@@brandonlunn526 als mod ftw
@3ch0_1710 ай бұрын
what would 400 psi of turbo pressure actually do to this engine? would the turbine just grenade itself and mangle the engine?
@kreenfarhat37852 жыл бұрын
A compound setub maybe can handle that much boost
@braziliansheetbox24972 жыл бұрын
AKA ICE bomb
@AJS_Drums2 жыл бұрын
well. thats pretty much forcing a jet engine amount of air. keep in mind there are turbo charger jet engines
@jackmagnium61152 жыл бұрын
@@StaticVapour590 The big combust😂
@AJS_Drums2 жыл бұрын
Assuming it wouldn't violently eject every connecting rod and piston through the side of the block, you'd probably blow a head gasket almost instantly or strip the head bolts from the engine block.
@AliceC9932 жыл бұрын
Now do 5 liters with 5000 psi of boost.
@AJS_Drums2 жыл бұрын
Do you _want_ to reverse the Earth's rotation? _Are you, perhaps, _*_crazy?_* -Like me?-
@Avetho2 жыл бұрын
@@Avetho i guess im not the only one going full send at everything 😅😅
@gewoontimm2 жыл бұрын
@@Avetho The earth doesn't rotate.
@roar40s2 жыл бұрын
@@roar40s How would we have day and night then?
@AJS_Drums2 жыл бұрын
@@AJS_Drums The world is a simulation. The sun and moon are projected to you. Essentially you are alone in the world.
@roar40s2 жыл бұрын
I like your videos, I’d love to see a mod pack with a bunch of your engine experiments
@tomaspiscicelli32882 жыл бұрын
Omg yeah that's an amazing idea, I'd download it in a heartbeat
@obama_is_hot62 жыл бұрын
I don't think a 300cc engine could produce 500 psi of exhaust pressure, let alone boost pressure
@thelazarous2 жыл бұрын
I know it's an old comment, but it's not actually the displacement that affects peak cylinder pressures, so regardless if 300cc or 5000cc, peak pressure is going to be relatively consistent across both engines. But for the record, peak diesel cylinder pressures usually peak around 950-1000 psi, but a well built petrol race engine will also be able to achieve such pressures (especially forced induction). That being said, obviously that 1000 psi is going usually drive the wheels, and not the compressor but, just wanted to add that in.
@samnangchea5025 Жыл бұрын
@@samnangchea5025 Well it's a good thing I didn't mention cylinder pressures then, isn't it.
@thelazarous Жыл бұрын
"How big is your engine? -0.5 litres -7 litre V8 Moudrrr!!!, how did they so few horsepower from a 0.5 litre moudr?"
@mixedboi2 жыл бұрын
Clarkson?
@Mrpepsi320 Жыл бұрын
Ford figuring out what new engine to place in an SUV:
@gwenlop95128 ай бұрын
ngl that 3 cylinder sounds pretty sweet + those bangs
@GewelReal Жыл бұрын
imagine having a turbo the size of your car and louder than a straight piped lambo
@pezzygamez4022 жыл бұрын
Hmmm…I wonder how this would go with a sequential turbo setup🤔
@jaronshelton41242 жыл бұрын
Blowing tires off in 4th doing 140. Very impressive.
@UBeesh102 жыл бұрын
I love how someone is shooting the car during gear changes
@my3jeeps2 жыл бұрын
The turbo lag is hilarious 😂
@alexcardenas6279 Жыл бұрын
You know you've done some stupidity crazy tunning when your low boost is about 70 psi
@steph_77752 жыл бұрын
I just love that i3 sound, dunno why.
@kwsths4992 жыл бұрын
I've always wanted an engine with 100lb-ft from 2000rpm to 20000rpm. Butt this one isn't bad either.
@Malficion2 жыл бұрын
Great performance comparison content
@firsttitlegaming31562 жыл бұрын
Fun project, thanks
@markbarber78392 жыл бұрын
thats a cool backfire sound
@mr.wyrzykowski75222 жыл бұрын
5:35 **Cummins Turbo Lag be Like:**
@RailsofForney8 ай бұрын
In the reality, such an engine would blow up in a matter of seconds...
@cervantes1168 Жыл бұрын
I love the last run was averaging a bit under three miles per gallon at speed
@djlinux64 Жыл бұрын
it's crazy how the turbo produces 40x the power of the base engine at 200mph
@vladimirputin3426 Жыл бұрын
i cant wait to strap a wireless camera to one of the pistons and see what outer space looks like!
@nono-oz4gv8 ай бұрын
LOL
@monsieurdubitatif85678 ай бұрын
dude, where are the oil slicks all over that tarmac from those engines popping!
@brentlanyon46548 ай бұрын
Sounds like my 1000hp pigeon. 500cc and like 300 pound of boost
@scootbmx012 жыл бұрын
Only took about 200 psi to reach stock v8 power. This is the future right here, an electric motor to get up to speed, and a 350 psi 30 ci gas engine for power
@chincemagnet Жыл бұрын
Those backfires though
@murilocatureba69752 жыл бұрын
👍👍👍nice test
@jaquememe43522 жыл бұрын
Should do a go kart with a v8 and 200 lbs of boost and do a top speed test 🏁
@jimbright81942 жыл бұрын
Idk why but I like the way it sounds 😅
@tylermatheson43762 ай бұрын
It'll be fun driving this thing in the city traffic
@sushrutdongargaonkar2073 Жыл бұрын
we really need the backfire sound mod and the BOV these sound insane !
@alia92172 жыл бұрын
The backfire sound comes with the D-series side exhaust and the bov is from the Bolide.
@ForgottenMustard2 жыл бұрын
@@ForgottenMustardZamn
@markjf__2 жыл бұрын
I think this engine maybe around in near future, with electric motor to help move at low speed and electric compressor to spool up. Wait isnt this is what koenigsegg gemera drives on?
@mamadhharyadi24292 жыл бұрын
The Gemera uses a 2 liter 3 cylinder with 3 electric motors which give the car a combined power output of 1,700 hp
@TheSilverShadow17 Жыл бұрын
Amazing!
@Serhii_Sirko2 жыл бұрын
1:32 500cc kicked in yo
@FR_CS Жыл бұрын
My lawnmower seeing me walking thru the garden to it with a MTU turbine: 🫥
@MM-cg2vj2 ай бұрын
When do you want boost? Yes
@GhostOfDamned2 жыл бұрын
well it would more likely be *no*
@schkann13842 жыл бұрын
For fox creek, don't short shift the last and most power full run.
@michaelcordeiro43882 жыл бұрын
bro just 500 psi boosted a dirtbike engine
@pezzygamez4022 жыл бұрын
3 miles to the gallon? Sounds like a bad day when they gotta fill up every 70ish miles
@ramoncatano81252 жыл бұрын
seems not that unrealistic with over 1000hp and full throttle.
@Coolgamer4002 жыл бұрын
That poor little micro-truck engine is probably glowing like the sun under the hood!🤣 I can't even imagine the combustion pressure with that kind of boost, but I'll bet it would probably run better on diesel or heavy oil at that point..😂
@danw1955 Жыл бұрын
What mod is this that allows you to fully customize the boost and put any engine in any base car?
@EcksDee-kh7ut2 жыл бұрын
Let's say u build the engine with dark matter so it can hold the pressure , the injector won't even be able to spray flue air would just go inside the injector hole , not to mention the valves won't be able to shut closed cuz of the pressure pushing it that's crazy
@cocon0t2 жыл бұрын
If it keeped the valves open because of the presure just a little, it would be forced miller cycle
@dantevito11932 жыл бұрын
The fuel pressure in my diesel engine in the injectors are around 1800-2000 bar. That is roughly 26106 PSI, my turbo is only doing 2 bar / 30 PSI tho :D
@Beni_7772 жыл бұрын
543 psi of fuel pressure is all you need 😂
@thiswillprobhrt2 жыл бұрын
Just shoot fuel in before the turbo
@spankthemonkey34372 жыл бұрын
Sounded like a GR yaris with the turbo I3
@feilistialininta64452 ай бұрын
Bro was making 2300 lb-ft of torque. SHEEEEEEEESH
@chibu39722 жыл бұрын
Wheel torque. That’s with gear reduction/torque multiplication. Normal family sedans make over 1000 ft/lbs of wheel torque in first gear.
@TranceFur2 жыл бұрын
@@TranceFur I know that, it was a joke.
@chibu39722 жыл бұрын
Lol nice vid man a small engine like that is basically useless without a cam and propper valves and stuff, rev it to about 12000 rpm and it will be much happier and make way more power! At your 7k redline you’d barely be getting into the torque lol thing would make 100hp easily
@Yz4Life2 жыл бұрын
Wastegate? I ain't never heard of no wastegate!!
@elijahmeacham44542 жыл бұрын
European Union 2040 be like:
@kacper38872 жыл бұрын
Now put this engine in a autobello piccolina lol
@toyotaae86trueno2 жыл бұрын
What wheels and tires are on the D series?
@jimmyjudefilms47572 жыл бұрын
I got a little squirrely when the turbo spooled up and it was making 1000hp
@dcdanger61512 жыл бұрын
and if you do the same but with a fiat 600?
@14-K2 жыл бұрын
Energy drinks be like
@TheRealIceCrafter Жыл бұрын
Could You actually imagine somebody spinning there tires at 100mph on the highway bro?
@Anthonysmith-ic8ef2 жыл бұрын
This would be insane in a motorcycle
@Motoboo_Marine2 жыл бұрын
I waited for VTech to kick in the whole time
@jamesrobson59672 жыл бұрын
You should see what is the lowest mpg you can reach from it.
@allothernamesbutthis2 жыл бұрын
sounds exactly like my lawnmower
@bl00dygames272 жыл бұрын
I just want to know who built the hardware that held that SOB together, I need that for my truck
@MaverickWindsor3512 жыл бұрын
my '21 ford ecosport has a 998cc i3 and makes 24psi of boost. not bad for a tiny turbo.
@DroneFox12 жыл бұрын
Testing the future Ford EcoBoost engine?)))
@flt8422 жыл бұрын
Kinda spicy when that 500 psi hits LOL. Changing your name to Spicy Mustard.
@RATTL3R186 Жыл бұрын
that thing would be a fucking diesel at that boost level
@MyLonewolf252 жыл бұрын
Hi I'm interested in this program where did you get it.
@mariuscocklin55422 жыл бұрын
what do you mean "there's no replacement for displacement" the replacement for displacement is MOAR BOOST.
@jaredleroy98762 жыл бұрын
Sch-a-ta-ta-ta-ta🤣
@cr4nkpat242 жыл бұрын
bro's engine's made of obamium
@GemAtHome Жыл бұрын
8:00 How much turbo lag you have on there? Yes
@edgarsanchez8695 Жыл бұрын
How did you get the little engine there?! I'd love to drive that myself!
@FoxamPL Жыл бұрын
What engine mod are you using?
@x86DualBooter2 жыл бұрын
good day, would you please include the modes your are using ? Thank you, Nasser
@NASSER1989able Жыл бұрын
What mod do you use!!
@isaacsrandomvideos6672 жыл бұрын
Single cylinder diesel with 500psi!
@noone420692 жыл бұрын
more of these
@zoominalways2 жыл бұрын
So how do you get these insanely high boost settings in the game?
@nickolaslandon4640 Жыл бұрын
I wonder if gasoline would turn solid at such high pressures when atomized so you would in effect be attempting to burn petroleum dust
@djlinux64 Жыл бұрын
1046 bhp hits at 200mph!!
@chelasman2 жыл бұрын
I couldn’t see well, but it looked like he had 1-1 hp to tq yet such a horrible launch… I’m willing to bet it only took 50lbs boost and some proper gearing to achieve 200
@natethompson52962 жыл бұрын
1:05 what Americans think European spec cars with 1.4 turbo engines are like
@aidan15852 жыл бұрын
Do u use an invencibility mod??
@Lisdexanfetamine2 жыл бұрын
That lag though
@zahari_s_stoyanov2 жыл бұрын
I got a challenge for you, try to drive this normally. In AI traffic.
@austinhoward542 жыл бұрын
An average european modern car
@WaluigiStadium2 жыл бұрын
Make modded pigeonengine sounds Like: Real life incline 3 engine sound
@jasontheracer82682 жыл бұрын
Effectively a jet turbine smashing air into that poor engine. At that PSI it may very well be making most of the power from the pressure alone and not the combustion. Haha. I would imagine the side exhaust might be strong enough to push you around.
@raptorspy13 Жыл бұрын
500cc is 0.5 liter. That's half a liter I don't recall that truck coming with such a small displacement.
@AndToTheRepublic4WhichItStands2 жыл бұрын
Should have given it 4.10 rear gearing ☹🤣
@rhubarbpie20272 жыл бұрын
wait, i dont remember this backfire sounds in game
@m1sst4k372 жыл бұрын
I download this game like six years ago and never played it once. It has three hours of updates and I just don’t feel like it …. so I just watch people on KZhead doing this so I don’t have to
@downlowgo_4013 ай бұрын
500-700 psi turbo on a 1.8 liter engine
@LanNguyen-ib3ey2 жыл бұрын
Little longer gearing, you might have hit it with only 400psi
It will build boost in 2-3 business days
Public holidays and weekends not included.
😂😂😂😂
It didn't have a problem building boost, but the engine is too small to take advantage of the extra airflow. If you watch the boost gauge, it hardly even fell out of boost. Boost pressure is just a measure of restriction and one part of the equation.
@@208Concepts but a 500cc spooling a turbo capable of this much boost doesnt seem realistic tho. At this boost this engine would be pneumatic lol.
@@midlifeparty it most definitely is not realistic 🤣
If this engine was real, I can't even imagine what it would go through with such boost numbers... Even 15PSI seems too much for it.
no shit sherlock
Fr, 500 psi like bruh those cylinders gone by just reaching 20 Psi. But that isn't that weird since theres a 80 psi 4 cylinder Eclipse
@@markjf__ If I am not mistaken, there are diesel dragsters running 150-200 pounds of pounds of boost that somehow don't (always) explode. The forces at play on the rotating assembly are hard to comprehend.
@@markjf__ who's eclipse are you talking about? I had a buddy we had his on the dyno, it was an awd 4cyl with methanol injection and a home made turbo. I remember it was 768hp at the wheels. We had gotten that thing to the point that even with the best arp studs our performance issue was that the studs were stretching at wide open throttle and coolant was getting past the head gasket. When I left the project they were going to try a different turbo to see if they could get more power just from making a more efficient turbo but they really were at the end of possibility for that block. They were going to switch it over to the V6 but I never saw it happen
I feel like even that was in the high 30s and not 80 psi. That was a actually drivable semi reliable engine though and not a track engine that was going to get rebuilt after every pass tho. I believe you could get 80 psi for a couple of runs out of an engine like that but I don't know why you would
"So what's the 0-60?" "It has one." "Yeah, but what is it?" "Idk, we haven't hit it yet."
We think it has one. Not sure though as we are still in 1st gear after an hour
5:44 VTEC YO!
Honda drivers at 3AM
@@KitKitChanIsaac 😂 so true
It's kind of interesting that the engine was able to run at those higher boost pressures. I was kind of expecting the engine to stall out from the air only being able to compress so much before it starts to air-pillow, or act like an air-spring in an air suspension system.
That's a great fucking question
I guess, in beamNg no
Irl, there would be a compression ratio that would cause that to happen, BUT it wouldn't be as low as you might think. Gotta remember, atleast one of the other pistons is providing the force required to fully compress and ignite the air/fuel in any other piston, and full boost is usually achieved at full power, so there wouldn't be a lack of power at lower rpm, because there wouldn't be enough boost to create an air pillow. Just off the top of my head, I belive that it would be nearly impossible to create such a scenario (factors such as the strength of engine components and turbo size/exhaust flow are up to par) for simply that reason More power is created by the last cylinder(s) firing than is required to compres the air/fuel to the point of ignition, at any point of the Rev range. Though, there has to be some extremely high compression ratio, like unwordly high, that would create some other scenario.( a fucking black hole?) Or something that science had observed or considered. Although that would be impossible with today's technology, and prolly future technology. Like how strong of a engine would you need to withstand a compression ratio of, say, 1400^3/1? All of that is speculation though, as I am a highschool student with no prior experience in any form of physics or whatever else would help explain the workings of such a scenario
Irl, there would be a compression ratio that would cause that to happen, BUT it wouldn't be as low as you might think. Gotta remember, atleast one of the other pistons is providing the force required to fully compress and ignite the air/fuel in any other piston, and full boost is usually achieved at full power, so there wouldn't be a lack of power at lower rpm, because there wouldn't be enough boost to create an air pillow. Just off the top of my head, I belive that it would be nearly impossible to create such a scenario (factors such as the strength of engine components and turbo size/exhaust flow are up to par) for simply that reason More power is created by the last cylinder(s) firing than is required to compres the air/fuel to the point of ignition, at any point of the Rev range. Though, there has to be some extremely high compression ratio, like unwordly high, that would create some other scenario.( a fucking black hole?) Or something that science had observed or considered. Although that would be impossible with today's technology, and prolly future technology. Like how strong of a engine would you need to withstand a compression ratio of, say, 1400^3/1? All of that is speculation though, as I am a highschool student with no prior experience in any form of physics or whatever else would help explain the workings of such a scenario
Well of course there we're mods installed to not absolutely obliterate the engine. If there would be no mods, this thing probably would have thrown a rod at 15 psi
I like the fact that we're starting at 50psi
So, a .5L 3 banger running approximately 100 pounds of boost has approximately the same power as the car did stock? Cool
Yeah because his turbo wasn't getting full potential till 4th gear, for a turbo to spin it requires torque and rpm. Turbo lag is a true killer, if this had antilag it would be a beast
@@brandonlunn526 als mod ftw
what would 400 psi of turbo pressure actually do to this engine? would the turbine just grenade itself and mangle the engine?
A compound setub maybe can handle that much boost
AKA ICE bomb
well. thats pretty much forcing a jet engine amount of air. keep in mind there are turbo charger jet engines
@@StaticVapour590 The big combust😂
Assuming it wouldn't violently eject every connecting rod and piston through the side of the block, you'd probably blow a head gasket almost instantly or strip the head bolts from the engine block.
Now do 5 liters with 5000 psi of boost.
Do you _want_ to reverse the Earth's rotation? _Are you, perhaps, _*_crazy?_* -Like me?-
@@Avetho i guess im not the only one going full send at everything 😅😅
@@Avetho The earth doesn't rotate.
@@roar40s How would we have day and night then?
@@AJS_Drums The world is a simulation. The sun and moon are projected to you. Essentially you are alone in the world.
I like your videos, I’d love to see a mod pack with a bunch of your engine experiments
Omg yeah that's an amazing idea, I'd download it in a heartbeat
I don't think a 300cc engine could produce 500 psi of exhaust pressure, let alone boost pressure
I know it's an old comment, but it's not actually the displacement that affects peak cylinder pressures, so regardless if 300cc or 5000cc, peak pressure is going to be relatively consistent across both engines. But for the record, peak diesel cylinder pressures usually peak around 950-1000 psi, but a well built petrol race engine will also be able to achieve such pressures (especially forced induction). That being said, obviously that 1000 psi is going usually drive the wheels, and not the compressor but, just wanted to add that in.
@@samnangchea5025 Well it's a good thing I didn't mention cylinder pressures then, isn't it.
"How big is your engine? -0.5 litres -7 litre V8 Moudrrr!!!, how did they so few horsepower from a 0.5 litre moudr?"
Clarkson?
Ford figuring out what new engine to place in an SUV:
ngl that 3 cylinder sounds pretty sweet + those bangs
imagine having a turbo the size of your car and louder than a straight piped lambo
Hmmm…I wonder how this would go with a sequential turbo setup🤔
Blowing tires off in 4th doing 140. Very impressive.
I love how someone is shooting the car during gear changes
The turbo lag is hilarious 😂
You know you've done some stupidity crazy tunning when your low boost is about 70 psi
I just love that i3 sound, dunno why.
I've always wanted an engine with 100lb-ft from 2000rpm to 20000rpm. Butt this one isn't bad either.
Great performance comparison content
Fun project, thanks
thats a cool backfire sound
5:35 **Cummins Turbo Lag be Like:**
In the reality, such an engine would blow up in a matter of seconds...
I love the last run was averaging a bit under three miles per gallon at speed
it's crazy how the turbo produces 40x the power of the base engine at 200mph
i cant wait to strap a wireless camera to one of the pistons and see what outer space looks like!
LOL
dude, where are the oil slicks all over that tarmac from those engines popping!
Sounds like my 1000hp pigeon. 500cc and like 300 pound of boost
Only took about 200 psi to reach stock v8 power. This is the future right here, an electric motor to get up to speed, and a 350 psi 30 ci gas engine for power
Those backfires though
👍👍👍nice test
Should do a go kart with a v8 and 200 lbs of boost and do a top speed test 🏁
Idk why but I like the way it sounds 😅
It'll be fun driving this thing in the city traffic
we really need the backfire sound mod and the BOV these sound insane !
The backfire sound comes with the D-series side exhaust and the bov is from the Bolide.
@@ForgottenMustardZamn
I think this engine maybe around in near future, with electric motor to help move at low speed and electric compressor to spool up. Wait isnt this is what koenigsegg gemera drives on?
The Gemera uses a 2 liter 3 cylinder with 3 electric motors which give the car a combined power output of 1,700 hp
Amazing!
1:32 500cc kicked in yo
My lawnmower seeing me walking thru the garden to it with a MTU turbine: 🫥
When do you want boost? Yes
well it would more likely be *no*
For fox creek, don't short shift the last and most power full run.
bro just 500 psi boosted a dirtbike engine
3 miles to the gallon? Sounds like a bad day when they gotta fill up every 70ish miles
seems not that unrealistic with over 1000hp and full throttle.
That poor little micro-truck engine is probably glowing like the sun under the hood!🤣 I can't even imagine the combustion pressure with that kind of boost, but I'll bet it would probably run better on diesel or heavy oil at that point..😂
What mod is this that allows you to fully customize the boost and put any engine in any base car?
Let's say u build the engine with dark matter so it can hold the pressure , the injector won't even be able to spray flue air would just go inside the injector hole , not to mention the valves won't be able to shut closed cuz of the pressure pushing it that's crazy
If it keeped the valves open because of the presure just a little, it would be forced miller cycle
The fuel pressure in my diesel engine in the injectors are around 1800-2000 bar. That is roughly 26106 PSI, my turbo is only doing 2 bar / 30 PSI tho :D
543 psi of fuel pressure is all you need 😂
Just shoot fuel in before the turbo
Sounded like a GR yaris with the turbo I3
Bro was making 2300 lb-ft of torque. SHEEEEEEEESH
Wheel torque. That’s with gear reduction/torque multiplication. Normal family sedans make over 1000 ft/lbs of wheel torque in first gear.
@@TranceFur I know that, it was a joke.
Lol nice vid man a small engine like that is basically useless without a cam and propper valves and stuff, rev it to about 12000 rpm and it will be much happier and make way more power! At your 7k redline you’d barely be getting into the torque lol thing would make 100hp easily
Wastegate? I ain't never heard of no wastegate!!
European Union 2040 be like:
Now put this engine in a autobello piccolina lol
What wheels and tires are on the D series?
I got a little squirrely when the turbo spooled up and it was making 1000hp
and if you do the same but with a fiat 600?
Energy drinks be like
Could You actually imagine somebody spinning there tires at 100mph on the highway bro?
This would be insane in a motorcycle
I waited for VTech to kick in the whole time
You should see what is the lowest mpg you can reach from it.
sounds exactly like my lawnmower
I just want to know who built the hardware that held that SOB together, I need that for my truck
my '21 ford ecosport has a 998cc i3 and makes 24psi of boost. not bad for a tiny turbo.
Testing the future Ford EcoBoost engine?)))
Kinda spicy when that 500 psi hits LOL. Changing your name to Spicy Mustard.
that thing would be a fucking diesel at that boost level
Hi I'm interested in this program where did you get it.
what do you mean "there's no replacement for displacement" the replacement for displacement is MOAR BOOST.
Sch-a-ta-ta-ta-ta🤣
bro's engine's made of obamium
8:00 How much turbo lag you have on there? Yes
How did you get the little engine there?! I'd love to drive that myself!
What engine mod are you using?
good day, would you please include the modes your are using ? Thank you, Nasser
What mod do you use!!
Single cylinder diesel with 500psi!
more of these
So how do you get these insanely high boost settings in the game?
I wonder if gasoline would turn solid at such high pressures when atomized so you would in effect be attempting to burn petroleum dust
1046 bhp hits at 200mph!!
I couldn’t see well, but it looked like he had 1-1 hp to tq yet such a horrible launch… I’m willing to bet it only took 50lbs boost and some proper gearing to achieve 200
1:05 what Americans think European spec cars with 1.4 turbo engines are like
Do u use an invencibility mod??
That lag though
I got a challenge for you, try to drive this normally. In AI traffic.
An average european modern car
Make modded pigeonengine sounds Like: Real life incline 3 engine sound
Effectively a jet turbine smashing air into that poor engine. At that PSI it may very well be making most of the power from the pressure alone and not the combustion. Haha. I would imagine the side exhaust might be strong enough to push you around.
500cc is 0.5 liter. That's half a liter I don't recall that truck coming with such a small displacement.
Should have given it 4.10 rear gearing ☹🤣
wait, i dont remember this backfire sounds in game
I download this game like six years ago and never played it once. It has three hours of updates and I just don’t feel like it …. so I just watch people on KZhead doing this so I don’t have to
500-700 psi turbo on a 1.8 liter engine
Little longer gearing, you might have hit it with only 400psi
how do you get the telemetry?
Must have ARP fasteners