KZhead
Тәжірибелік нұсқаулар және стиль

2x72 Belt Grinder Build in 10 Minutes! Amazing DIY!

Take And Make
2021 ж. 27 Ақп.
359 661 Рет қаралды
Жүктеу

Make Belt Grinder with your own hands from scratch!
Check out my New Merch! bit.ly/40Elhmv
Visit my Patreon Page bit.ly/2IYZSR6
► Link to Plans for 2x72 Belt Grinder ►►►bit.ly/2P1qowA
Brian's Instagram bit.ly/37Jj9zU
Yucel TR Maker Instagram bit.ly/2NBgeCB
How's it going, everybody?!
This is a quick video build, if you wanna see the full version follow the link bellow
• Building the REVOLUTIO...
Huge shout out to my supporters on Patreon:
Geoffrey H Goldberg
Patrick Joyce
Wiring VFD • Huanyang VFD 2.2kw (pt...
Programming VFD • Huanyang VFD 2.2kw (pt...
Affiliate Links(Doesn't cost extra to you, but if you buy I'll get a lil kickback)
Drill Press Vise amzn.to/3bCGPXR
Drill Press Clamp amzn.to/3bCw1ZR
Cutting Fluid amzn.to/3pWCfbX
Countersink Drill Bits amzn.to/3dJtpMl
Large Drill Bits with 1/2" Shank amzn.to/3bBcuZV
Bi-Metal Hole Saw Kit amzn.to/3dLuYJU
Tap and Dies Set amzn.to/2Mmkcyf
Self Healing Cutting Mat amzn.to/3nbQ8T3
X-Acto Precision Knife amzn.to/3a0y8HK
Keep yourself protected while working get PPE
Raspirator amzn.to/3suu88v
Safety Glasses amzn.to/3bCzWG3
Ear Muffs amzn.to/3uxOdwa
Work Gloves amzn.to/2ZPle96
Follow me on Instagram bit.ly/2TthE3V
Visit my Patreon Page bit.ly/2IYZSR6
Donations for the channel development are welcome paypal.me/Gretskyi
Please Like, Share, and Subscribe!
Thank you very much for watching!
Have a great day!
#2x72
#metalfabrication
#beltgrinder

Пікірлер

  • Nice to see someone build one of these belt grinders with nothing but a drill press, welder, and hand tools. Most of these guys on you tube build a misle silo with tolerances within a tenth of a thousandth never realizing as long as you get the rollers in the same plane and make one adjustable you are probably good to go. I hit subscribe just because of that.

    @MrGyrhed@MrGyrhed7 ай бұрын

    • Wow, thanks!

      @Take_And_Make@Take_And_Make7 ай бұрын

  • After watching this twice, I was convinced I could do this in "10 minutes" too. But, it took 20min just to find my tape measure and still looking for my left glove. - Guess I can't.

    @randyporter3491@randyporter34912 жыл бұрын

    • HAHHAAHA!

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • Wait till you search for the 10mm socket... Absolute nightmare!

      @jordanwhite8667@jordanwhite86672 жыл бұрын

    • @@jordanwhite8667 😂

      @randyporter3491@randyporter34912 жыл бұрын

    • 😄

      @JesusChrist_IsTruth-LoveForALL@JesusChrist_IsTruth-LoveForALL Жыл бұрын

    • 😅😂🤣👍❤️

      @billwoehl3051@billwoehl3051 Жыл бұрын

  • For a shop with fairly minimal tooling, you killed it! Awesome build! 🔥💥🔥💥

    @MatthewHarrisStudio@MatthewHarrisStudio Жыл бұрын

    • Thank you!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • I subscribe first, like second, third watch the video because you don't talk. I enjoy only videos that the person don't talk. Thank you

    @david.drambareanu@david.drambareanu2 жыл бұрын

  • Thanks for the video. I now know I will pay $2k to buy one!

    @dannymaciejewski@dannymaciejewski17 күн бұрын

  • So cool master. This under my project too. Thank for sharing 😊

    @mr.ranyhomemade2466@mr.ranyhomemade246629 күн бұрын

    • Thank you! Cheers!

      @Take_And_Make@Take_And_Make23 күн бұрын

  • What a super job!!! Congrats!!!

    @rogerpatrongonzalez5800@rogerpatrongonzalez58002 жыл бұрын

  • Beast. Beastmode, brother. Epic. Solid work.

    @rayjr62@rayjr623 жыл бұрын

    • Thanks, man!

      @Take_And_Make@Take_And_Make3 жыл бұрын

  • a magician, congrats for your build, very nice indeed

    @user-spv96x3x7i.4kc@user-spv96x3x7i.4kc2 жыл бұрын

    • Thank you kindly!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Beautiful belt grinder. We shared this video on our homemade tools forum this week 😎

    @homemadetools@homemadetools Жыл бұрын

    • Glad you like it!

      @Take_And_Make@Take_And_Make11 ай бұрын

  • I am impressed.

    @jtjjbannie@jtjjbannie2 жыл бұрын

  • Very nice. I just finished mine and we both used a lot of the same techniques.

    @freestyla101@freestyla1012 жыл бұрын

    • Great 👍

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • That was fantastic. Nice work

    @lorefort@lorefort Жыл бұрын

    • Thank you very much!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Nice job! I also have a motor that is not a face amount so your idea of how to mount the motor will really help me out on my build.

    @tomsdreamshopworx@tomsdreamshopworx Жыл бұрын

    • Glad I could help! Thanks!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Excellent job done

    @rahulchikara8516@rahulchikara85162 жыл бұрын

    • Thank you! Cheers!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Well done, sir.

    @richardmahan4197@richardmahan4197 Жыл бұрын

  • Wonderful effort!

    @tango-bravo@tango-bravo Жыл бұрын

    • Thank you!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Nice build, if I had not already started building the one from different plans I purchased I would love to build this one. Maybe my son would want one.

    @keithsargent6963@keithsargent69632 жыл бұрын

  • You had me laughing at the welding table..! I’m stealing that idea..

    @tln25@tln255 ай бұрын

    • Go ahead!

      @Take_And_Make@Take_And_Make5 ай бұрын

  • So sweet i cant wait 2 build one , trying 2 come up with the loot

    @thefamily_ak1863@thefamily_ak18632 жыл бұрын

    • Yeah man, I love mine!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Bravo gran smeriglio a nastro sei molto professionale

    @Cetrifuga1945@Cetrifuga19458 ай бұрын

  • Great work. I need to make one.

    @todayletsbuild2153@todayletsbuild21532 жыл бұрын

    • Thanks! Start now!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • beautiful work! I would definetely choose this over the commercial products, the problem is that nobody sells them!

    @johndiakonis6706@johndiakonis67062 жыл бұрын

    • Check out Alec Steele's website. He has some pretty good units for sale. But I am impressed with this build. Thank you! :)

      @GarysBBQSupplies@GarysBBQSupplies2 жыл бұрын

  • Great build.

    @ClintsHobbiesDIY@ClintsHobbiesDIY2 жыл бұрын

    • Thanks!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • I just cut like 5 million pieces of 3/8” plate for my grinder build. Good lord my little harbor freight 1x30 got a work out this weekend!

    @eizzle78@eizzle78 Жыл бұрын

  • Very good job mash'Allah

    @sniper31013@sniper310132 жыл бұрын

  • Freaking awesome!!!!!!

    @uriel-heavensguardian8949@uriel-heavensguardian89494 ай бұрын

  • You my friend....need to aquire a mill....I applaud you with all that file work 😄😄😄

    @joeblochlinger@joeblochlinger2 жыл бұрын

    • Maybe one day!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Great video!! Thank you

    @BigNicky77@BigNicky772 жыл бұрын

    • Glad you liked it!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Good job!!👍👍👍

    @woodproject3684@woodproject36842 жыл бұрын

    • Thanks! 😃

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Super Project!!! I enjoy it a lot. Surprised how you could turn this heap of metal into such a machine.

    @orthobodycare5553@orthobodycare55533 жыл бұрын

    • Thank you very much!

      @Take_And_Make@Take_And_Make3 жыл бұрын

  • Big job very nice!!!

    @wanderleylemes7337@wanderleylemes73372 жыл бұрын

    • Big thanks

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • LOL The chipmunk scream at about 9:00 when the power comes on and the grinder gets up to speed had me laughing so hard.

    @jarodmorris611@jarodmorris611 Жыл бұрын

  • great job!

    @mr_torx@mr_torx2 жыл бұрын

    • I’m slow took 12 1/2 min

      @williamcarey6592@williamcarey6592 Жыл бұрын

  • I’ll buy one! Ha! Excellent job!!!

    @joshuarosenblatt@joshuarosenblatt7 ай бұрын

    • Thank you!

      @Take_And_Make@Take_And_Make7 ай бұрын

  • Fantastic 😎👊🏼

    @danielfarmer4311@danielfarmer43112 ай бұрын

  • BOA NOITE ....UM PROJETO FANTÁSTICO ,BEM ROBUSTO ,E SE PERMETIR IREI COPIAR ....ACHEI FABULOSO ....SOU GRATO PELA SUA DEDICAÇÃO EM NOS INSINAR ...SOU DA CIDADE DE JAÚ ,,ESTADO DE SÃO PAULO ,,,PAÍS BRASIL ..PARABÉNS

    @josefranciscof.rodrigues1575@josefranciscof.rodrigues15752 жыл бұрын

  • id like the plans nice build

    @MrYar4ik@MrYar4ik2 жыл бұрын

    • Search for Revolution 2X72 Grinder

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • Info is in his video description.

      @LemonySnicket-EUC@LemonySnicket-EUC9 ай бұрын

  • Good job! Like the speed holes :-)

    @marclofgren5130@marclofgren51302 жыл бұрын

    • Btw is it gasless welder you're using? All went so fast :-)

      @marclofgren5130@marclofgren51302 жыл бұрын

    • Thanks! You got it! You can also watch full version with commentaries here kzhead.info/sun/e5utmbiBZGpmZo0/bejne.html

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • @@Take_And_Make Thanks! And I will! :-)

      @marclofgren5130@marclofgren51302 жыл бұрын

  • ok, this is awesome

    @VR46Monster@VR46Monster Жыл бұрын

  • Руки из правильного места 👍

    @user-yk7vn3wf4n@user-yk7vn3wf4n2 жыл бұрын

  • Excellent

    @123suzukisamurai@123suzukisamurai7 ай бұрын

    • Thanks

      @Take_And_Make@Take_And_Make7 ай бұрын

  • Great build and video editing!

    @CreativeLionheart@CreativeLionheart2 жыл бұрын

    • Thanks for the visit

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Ficou muito bom em

    @passarocantando@passarocantando4 ай бұрын

  • THANK YOU !!!!

    @swooft44@swooft4410 ай бұрын

    • You're welcome!

      @Take_And_Make@Take_And_Make10 ай бұрын

  • You're a good person to know.

    @hereweare9011@hereweare9011 Жыл бұрын

  • Amazing!

    @Archsorceror@Archsorceror2 жыл бұрын

    • Thanks!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Meu Amigo , você é um ótimo proficional , um gênio , essa maquina é uma verdadeira jóia . Você confeccionaria , uma igual e venderia para mim ? 😐😐😐😐🖒🖒🖒🖒👏👏👏👏 Goiânia Goiás Brasil.

    @calipiomoraes9295@calipiomoraes92952 жыл бұрын

  • Before buying this sander I would use a rotary sander kzhead.infoUgkx3Pc2vLXfcgM5oIpF1iYcIWyFhHUC-G6v and didn't see the need for a belt sander. Boy was I wrong. this belt sander does the job quickly and gives a professional finish to the wood work.

    @nttrung30@nttrung309 ай бұрын

  • very nice !

    @keithlowe481@keithlowe4812 жыл бұрын

    • Thanks!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Brilliant build. The only thing that would make it better is a mig welder and oscillating sander so you can buff everything up nicely. Great work

    @AkbarVsTheMachines2@AkbarVsTheMachines22 жыл бұрын

    • Thanks for the tips!

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • If he used a gas nozzle and didn't weld without a gas nozzle mag, the result would be better too

      @Fischi-tj6ue@Fischi-tj6ue Жыл бұрын

  • Nice!

    @MauricioGoncalves.@MauricioGoncalves. Жыл бұрын

    • Thank you! Cheers!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • What I learned from this video is that I will be buying a grinder 😂 you are a man with much more patience and skill than me!

    @fletcherloxton995@fletcherloxton99510 ай бұрын

    • That is not everyone's path for sure no

      @Take_And_Make@Take_And_Make10 ай бұрын

  • sehr schöne maschine , top

    @ziegenwilly@ziegenwilly Жыл бұрын

    • Vielen Dank!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • W O W ! ! !

    @maturefox1@maturefox12 жыл бұрын

  • nice

    @marksleeper9385@marksleeper9385 Жыл бұрын

  • Projeto maravilhoso amigo.. Irei me diedicar para que ele saia do seu vídeo rs. Essas medidas desenhadas, você compartilha? Brasil

    @CAFANGODOCABO1@CAFANGODOCABO1Ай бұрын

  • Una pregunta, con que programa haces esas plantillas? Saludos de Bolivia

    @lamborghini9651@lamborghini965122 күн бұрын

  • the front side is the place with the lower upper roller. what is the length of the connecting piece there?

    @ahmetturhan4800@ahmetturhan48002 жыл бұрын

  • Nice heavy duty build with barebones tools. Ever try using a hole saw to remove weld seam in square tube? It works pretty good on DP. Lot easier than file

    @foxwood67@foxwood672 жыл бұрын

    • ทลรตชค

      @user-vg2kz9kv1c@user-vg2kz9kv1c2 жыл бұрын

  • That is crazy. What need?

    @mahmutsenkul5617@mahmutsenkul56172 жыл бұрын

  • You should get some gas MIG welding in there and you would probably really like the results.

    @drakeswake@drakeswake2 жыл бұрын

  • Wow,very5 nice

    @puiaralte5355@puiaralte53552 жыл бұрын

    • Thank you! Cheers!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • VERY NICE MACHINE 2 THUMBS UP, HAY THIS ONE TOOK YA 10 MINUTES NOW YA GOT IT DOWN, WHEN YA BUILD ONE TO SELL ME ............ SHOULD ONLY TAKE 7 MINUTES, JUST BUSTIN YA MAN, GREAT BUILD

    @mikecondoluci53@mikecondoluci532 жыл бұрын

    • Thanks 👍

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • عاشة ايدك ❤

    @sabrimuhammad4584@sabrimuhammad4584 Жыл бұрын

  • Muito bom..como obter o projeto..

    @alexandreguimaraespimentel168@alexandreguimaraespimentel16824 күн бұрын

  • Always wanted a 2x72..thye cost way to much..after watching this thats the reason they cost so much!!...great work brother impressive..guess I'll buy the cheap one from harbor freight lol..awesome work once again.

    @hlrgrr66@hlrgrr66 Жыл бұрын

    • I would strongly recommend to start investing in this machine, buy materials step by step, that's how I've done it. This grinder will last forever!

      @Take_And_Make@Take_And_Make Жыл бұрын

    • I might try it sometime

      @hlrgrr66@hlrgrr66 Жыл бұрын

  • Wow great job , is there any plans available for this , and best place to purchase the wheels Thanks

    @anthonyfoster7206@anthonyfoster72065 ай бұрын

    • You dont really need plans , look at it for a bit and you figure it out , tolerances arent that bad either.

      @StodOneR@StodOneR2 ай бұрын

  • Buenas noches podria poner las medidas de la maquina gracias

    @A.N.T-fw1gd@A.N.T-fw1gd2 жыл бұрын

  • Top

    @gilmarfaioli226@gilmarfaioli2262 жыл бұрын

  • I bought the kit from Brian and then used it to teach myself to MIG. But cutting out all the pieces without a mill or plasma cutter? Fierce.

    @Immolate62@Immolate622 жыл бұрын

    • Not everyone has access to those machines, this video here to motivate and show it could be done by hand and it will work

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • @@Take_And_Make It was a compliment. Take the compliment.

      @Immolate62@Immolate622 жыл бұрын

  • Nice project. I was wondering , why did you use such thick material? I see lots of very similar belt sanders/grinders that work very well but are built with less thick materials. Is there a reason for what you decided to use? Thumbs Up!

    @garymucher4082@garymucher40822 жыл бұрын

    • Thick material means less vibrations but he overdo it. 3/8 or 10mm is more than enough

      @horiachiorean8592@horiachiorean85922 жыл бұрын

  • Nice work but what type of motor did you use, it's HP, voltage, amps, frame type, and what kind of controller was used for that motor? Also, how did you connect it all together?

    @GnosisMan50@GnosisMan509 күн бұрын

  • 👍

    @BuildMann@BuildMann2 жыл бұрын

  • Top..

    @PeterNetped@PeterNetped2 жыл бұрын

    • Thanks!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • good day mate.. what TPI you used for the band saw blade, thanks..

    @mindfreak001009@mindfreak001009 Жыл бұрын

    • Hey mate, I don’t remember, refer to this video kzhead.info/sun/p8ijfJuPbaqsfa8/bejne.html

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Great work with minimal tools. Maybe buy yourself a grinder and a flap disk and or a 1/4” air die grinder and a disk setup. Save a few hours. But still good work and great dedication bro!

    @JakesShop@JakesShop2 жыл бұрын

    • There’s never not enough tools, there’s not enough motivation!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • แหม่​แจ๋ว❤️❤️❤️

    @Farrich9@Farrich92 жыл бұрын

  • I really like your grinder! What's the camera are you recording with?

    @McV3ko@McV3ko2 жыл бұрын

    • Thank you! I use Lumix FZ1000

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Where did the pattern come from? Awesome job!! Very neat!

    @dankain6345@dankain63455 ай бұрын

    • Look for Brian House 2X72 Grinder

      @Take_And_Make@Take_And_Make5 ай бұрын

  • To make a grinder, you need a grinder. Вelicious :)))

    @processdemidnet@processdemidnet Жыл бұрын

    • You need a small fish to catch a bigger fish!

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Why preheat before welding, is it extremely cold where you are or are you using Low Hydrogen steel. nice build. Top job, Cheers from Michael Australia.

    @mijodo2008@mijodo20082 жыл бұрын

    • Thanks mate! First of I had a shitty flux core welder, second of it was really cold in my garage those days temperatures dropped to negative 27C

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Do you have the plans for the 2 X 72 belt grinder you built.

    @allencalhoun8254@allencalhoun8254 Жыл бұрын

    • When you guys gonna learn how to read the description? I put everything you need down there! ► Link to Plans for 2x72 Belt Grinder ►►►bit.ly/2P1qowA

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Awesome work mate, where did.you get the plans from, this is the same I would lime to build myself... just not in 10 minutes !😂

    @skiddish500@skiddish5005 ай бұрын

    • Thanks mate! Check Brian House 2X72 grinder

      @Take_And_Make@Take_And_Make5 ай бұрын

  • How many HP is the motor and where did you buy the rolls? Planning to build one😃 Thanks

    @ilovecinnamoroll2013@ilovecinnamoroll20132 жыл бұрын

    • 1.5HP Wheels from TRMaker from Turkey

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Good morning, sorry if I would like to buy one, how much is the price?

    @albertoreyes1910@albertoreyes191019 күн бұрын

  • Hey, was it a case of you had that thick plate, and that's why you used it. Or do you think it needs to be that heavy. I've got some 1/4 inch thick. I'm thinking that's strong enough. Might weld nuts on, or just drill out n use nuts with bolts. Y'all give me some feed back.

    @markthornhill519@markthornhill519 Жыл бұрын

    • Thicker metal is better, but go ahead and use whatever you got buddy.

      @Take_And_Make@Take_And_Make Жыл бұрын

  • Супер 👍

    @user-pv3rv5eb2t@user-pv3rv5eb2t2 жыл бұрын

    • Спасибо!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • гриндер получился хороший

    @user-fp5pm1fe5f@user-fp5pm1fe5f2 жыл бұрын

    • Спасибо!

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Watching him finish the radius on those pieces I couldn’t help but think… 🤨 “…Dude, you need a bigger Grinder!”🤦🏻‍♂️🤷🏻‍♂️😬

    @grandpaallie1553@grandpaallie1553 Жыл бұрын

    • Right?! Lol

      @Take_And_Make@Take_And_Make Жыл бұрын

  • that keyway lol

    @captainchippy8559@captainchippy85592 жыл бұрын

  • What size motor is that ?

    @RealYurNext@RealYurNext2 жыл бұрын

  • Do you offer digital plans in CAD format? I have a CNC plasma to cut all the parts.

    @FlipFlopPilot@FlipFlopPilot2 жыл бұрын

    • bit.ly/2P1qowA

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Seems to be very functional. Chomped through the 3/4" square bar corner and the tool has a minimum of parts.

    @jackrichards1863@jackrichards18638 ай бұрын

  • What is the size of your belt grinder pivot bolt and where did you get yours from please tell it would be really helpful

    @blacksteel2434@blacksteel24343 жыл бұрын

    • 3/4 inch I bought it in bolts and nuts supply store

      @Take_And_Make@Take_And_Make3 жыл бұрын

    • @@Take_And_Make how long and from what store exactly i have looked around for a while can find any that i know would work

      @blacksteel2434@blacksteel24343 жыл бұрын

    • Black Steel You can buy them from Brian on his site. housemade.us

      @rtubed2471@rtubed24713 жыл бұрын

  • Very clever..but how do you move and work so fast

    @charlesdefrancisco5056@charlesdefrancisco50562 жыл бұрын

    • Years of practice! :))

      @Take_And_Make@Take_And_Make2 жыл бұрын

  • Some thick metel for you 110 welder

    @maxscal7537@maxscal75372 жыл бұрын

  • Belt grinder build just need a belt grinder to build it 🤣👌

    @3dp_edc@3dp_edc2 жыл бұрын

    • LOL If serious not necessarily but it sure helps! To land a big fish you need a big bait!

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • @@Take_And_Make haha no wasnt actaully serious just found it funny was all.

      @3dp_edc@3dp_edc2 жыл бұрын

  • What is the drive wheel size? Looks like about 6" or 7". Where did you source the wheels?

    @fredchainring6728@fredchainring67283 ай бұрын

    • 7” TRMaker

      @Take_And_Make@Take_And_Make3 ай бұрын

  • Nice build!!! And - also proof you can make cool stuff without a mill! But, I have to ask... was that about $600-700 worth of metal?

    @ja-bv3lq@ja-bv3lq2 жыл бұрын

    • Less then that, but I did have some in my shop. If I was gonna buy everything, probably would pay around 450-500 I think

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • @@Take_And_Make Gracias!

      @ja-bv3lq@ja-bv3lq2 жыл бұрын

    • @@ja-bv3lq De nada!

      @Take_And_Make@Take_And_Make2 жыл бұрын

    • ​@@Take_And_Makeis that for the motor/controller and all ? Or just the metal ?

      @LemonySnicket-EUC@LemonySnicket-EUC9 ай бұрын
KZhead