Project 0108 | Make it Extreme's Tank Chair
Using our two, previous creations with the number 0106 and 0107 accordingly, we made a new creation with the number 0108, which became our new vehicle in our collection.
► Click HERE to subscribe to Make it Extreme: bit.ly/MakeitExtreme
► Second Channel: bit.ly/MakeitExtremeShorts
• Get the Plan: bit.ly/MIEplans
• All details: bit.ly/tankchair
• Help us on patreon: bit.ly/MIEpatreon
Welding Machine:
• Mig: bit.ly/Rallymig
• Tig: bit.ly/PITIG
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.co.uk/shop/makeite...
-----------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitextreme
• Instagram: bit.ly/makeitextreme
Drone Shots by @telischristou
FB Page: bit.ly/telischristou
• Special Thanks to our Patrons:
✔TOP Patron: [Devin Bauste]
New Patrons: Christopher Wanis, Gerdi Van Staden, Tom Huffman, Douglas Brier, K W, Michał Fala, peter maas, Marcel Lau, Fab Lau, nathanvolcan05, Charlie Karlowsky, bagdas bagdonas, erdem tosuner, Steven, Anders Gamst, Austin Eib, Ruslan, Vincent Yong, DannyG, Luke Stokes, Zv3r3c91, Caca Mendes, Tim vigil, Matthias Hergenröther, cracked_machine, R-sai Plasmaq, Ben Wilkes, Joshua Perez, Tulus Harapan Hutauruk, Jason Clemence,
Gianmarco Bressan, Chris Nuttall, Iakovos Gregoriou, Brad Schesso, Vivek Sharma, Mark Ervin, Francisco Peebles, Bartek Podowski
• Playlist for all videos: bit.ly/2gZL4Dg
• Intro Design: vimeo.com/90149001
#makeitextreme #tankchair #trackchair
That would make me a sick wheelchair, I would be able to go camping and do outdoor stuff again. You should put them into production for the Disabled. 👍😎👍
Im sorry to hear that you are unable to do such activities, if i had the tools and skills to make something like this, id happily make one for you, but sadly i am unable to do so
Are use a wheelchair and I do plenty of camping/outdoor stuff
Maybe you wanna check our Jerry Rig Everything. He built an outdoor „wheelchair“ for his wife.
@@HvV8446 Wasn't insinuating you build me one, just thinking how great they would be for the disabled. Given its offroad abilities, it would suit some people very well. 👍😎👍 MDS
Check out the Terrain Hopper. That's what I use for 4x4 wheelchair. It is awsome!!
Every wheelchair bound persons dream, infact most people would love racing around in this! 👍🏻
Fuck yea we do! 😂
Hopefully it will hype in near future, i'd love to try it 😂
My dads disabled , he’s been asking me to make him a chair like this , perhaps I will use this as an inspiration to finally build him one
Loli4lyf I’m a master mechanic , welder fabricator , automotive painter , and locksmith , what makes you doubt my skills ? The expensive part is the tracks but I’ve been seeing some I can modify off of Alibaba.com
@@Mechaniclyfe tell me what you boast and i will tell you what you lack.
@Overspray you got the spitit, do it, share your expirience and your dads. we'll be greatful!
Can i ask the cost of just the tracks you have found
Tony's DIY Vehicle Flips & Rebuilds Tennessee about 1-2k for atv tracks
Your production quality has improved massively since I first found your channel. Keep up the great work!
Sometimes with Make It Extreme, I get the feeling that you guys have tapped into the thoughts of so many people, "Hey wouldn't it be great to have..... An All Terrain Tank Chair, just sit back and drive to wherever you want to go. " I swear that you have done this before with other projects, where we have thought about and dreamed of something that would make life easier or fun. The only difference is that you guys are seriously crazy enough to get out and make those things and bring our dreams to life. That's why I keep coming back to this channel.
Хочу такую мастерскую, при определённых знаниях и умении всем этим пользоваться, можно создавать что угодно. Браво...
Создавай мастерскую сам, всё в твоих руках.
Я в шоке.Так красиво всё делаешь,основательно и продуманно.А мастерская как оснащена-просто мечта)).Обычно такие видео лепят как попало,лепя что попало и из чего попало,лишь бы просмотров срубить.А тут ещё и правильно и надёжно)),прям не верится)).Очень нравится работа.
The best one like it that I have seen on the whole interwebs. If I ever get disabled enough to need one of these, it will have a similar design with a cammed 1/4 scale aluminum LPG V8 engine, and it will ROCK. Thanks for sharing. The cool factor is off the charts with this one.
Great job dude! Your welding,can, and machining skills are pretty dam kick-ass! This level of skill allows one to have almost limitless boundaries. Combine it with a creative mind and you have innovations that rival and sometimes exceed those such as the steam, combustible, and jet engines. The type of things that can transform entire civilizations. Props to you my friend from a welder/fabricator myself. Best wishes and keep up the great work!
Comment quality clearly on par with content quality here 👍
Chad , do you know where he is? I se palm trees but I do not recognize the terrain.
Теперь я знаю как выглядит "бешеная табуретка" ⚒️👍🏻👍🏻👍🏻👍🏻👍🏻😻😻😻 Если вы не видели, то он едет к вам 😹😹😹
Стульчак на колесиках..
What's up guys! If you interesting to get the plans for our projects it's available on patreon page. Link: www.patreon.com/makeitextreme/
Surprised some wealthy philanthropist hasn't ordered 100+ to give away as part of a charity? This truly can give the gift of mobility to kids like my son that so many of us take for granted. Especially seein as we live in a rural area with gravel roads & inclines where wheel chairs don't work so good. I know it would be a tall order, but 'IF' an EV model could be made, especially once solid state batteries are perfected? No noise or air pollution only good times. Truly amazing invention my hat's off to you, as you are indeed Brilliant & worthy of praise for your efforts. Good luck, here's wishing you every success going forward! 👏🏼
When is your premiere on Netflix?🤯
I’d love to have something like this. My wheelchair is absolutely terrible outdoors. We live out in the county so no sidewalks either
Have a look at this chair - REVA WHEELCHAIRS - www.revaarmoredvehicles.com/wheelchair.html . I don't know if they are still being built as the main person behind them passed away some time ago.
Non ci sono aggettivi per descrivere questo progetto. Ogni volta ti superi!!!! Bravissimo
That is so cool!!! I come from Germany and I had a car accident 10 years ago, since then I've sitting in a wheelchair. If I had the money, I would have a Tank Chair built by you. That would be so cool to be able to go anywhere again...
Speechless!!!! This is amazing... excellent work!!! Congrats to you guys for yet another very very cool project!!!
Maybe you can make an "EXTREME PARK" where people can come in and try these amazing things!! 😍
Ingenuity alone is remarkable let alone the execution. 👏
Greatest maker channel on the internet: content, production, creativity, the list goes on...
Sweet, next part: building a clean bolt on/off tank bodykit...
👌
Dude this is sick, love it 😍 you're a freaking hell of a maker, one of my favorite 👍👊👊
Yıllardır takip ediyorum bu adamı Şu adamın yaptığını kimsenin yapamaz.. o kadar işçilik varki kim bilir üzerinde ne kadar düşündü ve muazzam bir eser ortaya çıktı kendimde çok iyi bir tamirciyim ama senin işçiliğin ayrı bir muazzam çalışması kusursuz adeta.. bu tarz videoların devamını bekliyorum.. açık ara en iyi kanalsın gözümde..
What an incredible build as usual! That looks like a good thing to get less mobile people out into rough terrain. Thanks for sharing that. DC
Esse cara é um gênio.... parabéns por mais um projeto bem executado... abraços do Brasil 🇧🇷😉
Tbm tô aqui
Mais um brasileiro assistindo kkk
Opa tmj
Opa
Μπράβο ρε παιδιά, καταπληκτικό το εργαλείο!
Zakir Naik
One word to describe him: Genius Personified. I am completely awed by your engineering skills. I wish I have someone like you for a Guru. God bless you Brother..
Whomever he made this power chair for is going to be one happy camper. With all the tread, tensioners, and differential build, it's an unbelievable amount of effort.
*Well done.* This was an impressive display of skill. I would love to see someone built *a horizontal bandsaw.* I haven't seen one on any channel like this [possibly b/c of the skill it would take]. I believe that you, or Fireball Tool could do it; possibly even "Meanwhile in The Garage." I've seen about all there is to see being made, *but not that particular shop tool; there must be a reason why.*
I was begining to think colin furze had you killed
🤣 why would he do that
Finally! A lawn chair that will take me to the fridge for a cold beer! Your a real legend.
WOW, you are quite the engineer and fabricator. I see you could put rollers on top of the center spring mechanism in case track rubs on it, as previous comments this would be great for someone that loved the outdoors and could not walk... seriously this looks WOW.
Looks awesome and seems to work really well! The only flaw I can see is the tendency for it to tip forward under braking. I think if the bogies were biased a little more backward it could ride a little flatter and get better ground contact under braking.
Needs a safety harness and a full roll-cage. It could do forward rolls no bother!
im always waiting u upload a new badass project. this is awesome stuff! more power to you guys👍🤘🔥🔥🔥
I want all these skills. I am totally blown away. Good music, good knowledge, amazing talent.
εισαι το μοναδικο καναλι που βαζω πληρη οθονη και απολαμβανω την καθε στιγμη του βιντεο
Потрясающе! Такой бы аппарат хотел бы иметь каждый;)
Согласен. Надо будет сделать!
@@positive-critter держи в курсе
да, только очень сложная конструкция(( на уровне промышленных образцов.
Это ж главное наступательное орудие диванных войск!))
Хорошо получилось но жёсткое сидение. Позвоночника пиздец :) жопе шушуть болит. Моторомана жунжуломана щекочит.
That woukd be an awesome product to go into production for people using wheelchairs haha offroad extreme wheelchair
Awesome!!!
I Agree 100%!
@@rodeynsrene1007 not really comparable
Check out the „Ziesel“ vehicle, made by Mattro GmbH in Austria.
Been done. I forget the name, but some gun shop/defense contractor built an off road setup for a paraplegic vet so he could hunt again like 10 years ago or so. They offered it for a short time after, but there weren't exactly many people willing to meet the asking price.
Starts slow clap 👏🏻 👏🏻 👏🏻, well done, so much talent, really enjoyed this
gotta love good ol TIG welding, so quiet and clean, and makes such nice lookin welds
Cool, would love to have one since I no legs from above my knees.
you mean below your knees? Above means you don't have a body and only have legs
@@FaithfulMC one never knows...
Bruh so you dont have a body then
@@FaithfulMC Nah its pretty simple (as u must be ;) "no legs from above his knees" meaning he likely has no legs from the middle of his thighs down.
😘👍❗
Watching gearbox video: Wheres the tank it goes on? Me: found it!
I never would have thought to use an open diff as the main drive/steering component. I've seen some plans here on KZhead that are kinda complex for hobby level tank building. This design cuts down on the complexity by a lot. Magnificent build btw.
That is completely amazing. I am blown away by your engineering skills.
Belo protótipo irmão, brinquedo maravilhoso.... Em uma visão social, arrisco a dizer que traria muita mobilidade aos cadeirantes, por lugares como estes "maravigold" .
Mano, fiquei pensando nisso. Meu avô já está muito velho, mas ama andar pela fazenda dele, uma dessas resolveria muito do problema dele. Já consigo imaginar um projeto desse feito em alumínio reforçado, e com os rodantes maiores pra evitar a queda pra frente. Até um versão elétrica eu consigo imaginar.
Очень сложный проект!Браво👍
Заебательский мотоблок, плуг повесить и ваще огонь будет
Для калясочников какое чудо, по городу через ступени и бардюры только в путь
@@Use_2024 потребуют права, страховку и т.д.
@@user-rr7xk1in5o кому надо сделают, в городе видел пару человек на электро колясках
@@Use_2024 Эта - мото. Категория М, как минимум.
Μπράβο ρε παιδιά πάντα δημιουργικοί να είστε....
Wow, nice fit and finish details, good sense of style on the colors too. Was worried the tire/ belt notches would wear out quickly but looks to be holding up. The nose dipping on deceleration, like on a downhill, maybe a slightly longer length tread/ bigger tire diameter next build. Looks fun!
This was an awesome build, loved it, would like to build one as a project! How much did this end up costing?
Somehow these builds are really "superextreme" - except for the motor. I dont know... it seems the mechanical parts could handle a muuuuch much more badass motor. :)
Wow, that is one of the coolest looking things you have ever made. Outstanding!
Huge talent. Wicked cool product. Next one, aggressive tracks, electric motor, huge hunting market.
wow nice idea brother.
Hi 🤭
BRILIANT👏👏👏👍💫👑💎
Yeah I agree.. ure also creative too.. I used to watch urs too, and iam still am..
Mantap
@@DestraAmni CUWERDAS YA BANG KALAU BIKIN SELALU GAK KALENG KALENG
I need one immediately ❤️🌳❤️ best wishes from Germany the Tankland ...
Roll bar and safety belt....and so really it will become an unbelievable creation. You are a GREAT Mind and the hands follow your sinapses....Many thanks for these videos. Ciao Nicola from IT
AWESOME!!!!! this is absolutely one the most awesome things you've ever made. I want one. I'm disabled myself, and a thing like this, would give me the freedom again, to go into nature again
Awesome job! Really tidy looking. How does it go on steep hills?
Lean forward. Lol
I suspect it can only go up an incline that's about as high from the last wheel, at the front, as another wheel under the front wheel. So not much, tho i could be wrong, most of the weight should be low, that gear box and structure isn't made of packing peanuts. IMO, they should've gone even more extreme and made the two threads independent with a pivot at the center, and belt transmission.
Going downhill is when you REALLY need your helmet. Looks really good and like a blast to operate. You know the kids love danger, they would flock to it for a ride.
It flips over
aserta yeah or maybe if it was like a stand up scooter type so you could lean way forward or back
Amazing project bro, very proud of you. By the way first comment of the video hahaha:p
28th comment
@@UltimateEntity no my friend its first :)
122nd comment.
Dude your welding has came so far from when I first found your channel. In your earlier vids, there was a lot of splattering, lookin really good now
All it needs is a roll bar and seat belts ! Great Job !
Eventually this will evolve to Wall-E !!
Didn't know that the Stig had a need for a Wheel chair.
That is beyond bad ass! Hand made from the ground up. Amazing!
This backtrack with good headphones is too good !!
Love from pakistan bro 🇵🇰😍
Cool but just a bit longer tracks so you don't incline that much forward when braking....otherwise cool.
Thats a fair idea., but he's limited by the size of the donor tires so I have no idea if he would be able to make them much larger than they already are. Before other people comment about it; I have seen some people bond several tires together to make longer track material, but this looks like he deliberately chose to stick with the material from one tire per track, maybe to eliminate the possiblity of a weak joint, I don't know.
exactly, and add air suspension for the chair... i can see it shaking like a s*x toy.
Maybe a tire from a truck can be used, or are they too ridgid?
If I had money, I would buy two of these. Sensational, excellent work. A great artisan!
You are one expert fabricator and welder, keep up the videos. You could teach and train many students to carry on your work for a long time to come.
Next On : Extreme Tank Chair.. "turbocharger tuning"
But.... why? Because they _can_
This is the ultimate mobility scooter, very well done.
Great videography combined with some unreal talent! Best content on YT here!
You 're a beast 💪
Лайк если ищешь русский комент
You are really brilliant don’t stop start the production and keep the orange color I like the color
Pengerjaan sangat rapi, penuh perhitungan enggak asal-asalan, pengelasan sangat rapi juga, pokoknya top deh ide dan kwalitas pengerjaannya 👍👍👍
I liked, I clicked like again to undo it, I liked again, I clicked again to undo it and did this quite a few times to satisfy the need to like this loads of times. I had my reservations about the seat and how it would balance in response to movement, inertia and rolling forward, but this probably one of the best builds ever and the speed and control available is so good it's funny when the tank chair rotated. There needs to be another so that there can be a race.
Love these builds. Thanks for the show. Joe
If i had workshop like this . . . But of course , workshop and skills , that's what's needed.
Wow !!!! It was very well done !!! Excellent job, congratulations !!!!!!!!!
HELLO from las Vegas Nevada, is a good idea, there is no rollover cage, safety is important if you are going to commercialize, GOD BLESS YOU AND YOUR FAMILY.
You are clearly a genius!! 😀
Make it extreme your one of the best youtube builder's keep up the awesome work.
Take 106 + 107 =108. Lol Turns faster and quicker than a quad. Great build as always 👍👍
Ole ole y ole, Que arte, Eres un artista, Sigue con tus inventos y sigue deleitándonos con tus proyectos, ya espero ansioso el próximo, Gracias campeón. Un abrazo de jose.
You're a genius. Nice work.
One of my favorite channels. You guys are awesome!
Remarquable d' inventivité, une machine étonnamment bien conçu que je vois, cela mérite très largement un 20 sur 20! Bravo pour vous...
the quality of this video is so insane i'm trying to build a bike with a ninja r engine took 1 week I really appreciate your hard work brother
This guy is a master machinist
U're not human bro. U an alien. Came from another galaxy 💪
This is the king of channels am looking for.
Ай молодца.Хорошее оборудование.очень гибкие руки.фантазер.Просто крик браво
Dude, you are tottaly briliant!
Emagine MAKE IT EXTREM and COLLIN FURZE got together for something epic. Ide live to see the crazy outcome.
Cool, combining all the different projects to one build, awesome
Your orange and black vibe is cool
So cool, amazing engineering, for people with disabilities something like this could change a persons life, well done
Следующий проект,такая же копия в 10раз больше!))
Давно увидел первое видео и с тех пор ждал завершения проекта. Автору респект и уважуха!!!!!