Project 0133 | Making a motorbike from scratch with a fast coupling KTM engine
Finally the long anticipated motorcycle is here! After our previous project, ‘The fast coupling KTM engine’, it would not be a surprise that our next structure would be a vehicle.
► Get the plan: / makeitextreme
► Linktree: linktr.ee/makeitextreme
►All details about the video: bit.ly/3zrHk47
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
Arno Mott, Devin Blitzer, DA_Johan_Bishop, John E Baylor,
The Scientific Duo, Bruce Mansfield, Christian Díaz Armstrong,
Horacio Mejía, Felipe Carranza
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)
#makeitextreme #makeitextremeshorts
This guy is why KZhead was created. Crazy fabrication skills as well as editing skills! I can't stop watching!! I don't even care what is being built, I just love the whole fab stuff. Well done my friend. Very well done.
❤
Calidad total es lo que me gustado en este proceso soy un aprendíz muchas gracias
As a welder absolutely love the fabrication from the ground up. Hat's off on a great build. Instantly made me want to head to the shop!
Elkrka
@@monikalewandowska8344 Croatia?
kzhead.info/sun/Z6uthb2Oi5ikn4k/bejne.html
ok
I need one how mach is it to Zambia
The world of craftsmanship and industry are beautiful .... I make metal objects for furniture in my free time, they are hard work but they bring enormous satisfaction. I hope to grow on this platform, like everyone else. Greetings and good luck 😁😁😁😁
😍
I subscribed to ya bud.
@@frankierzucekjr thanks for support 💪
O
A day whitout creation is a day wasted in my opinion
You are one of the most amazingly talented fabricators that I have ever seen
Dnt forget big D and Johnny and Steve Darnell..And their are plenty more
You need to get out more. I work in manufacturing and this is amateur shit
true. i like the way how he make something to be extreem..
@@cali8221 Fgi*f**fur - ffi-fgi*gfi*g*i4**gg*iffff*igf*f-*igg*gffif*guff *f*g
*f
They say a man is as good as his tool are, but your tools and adaptions you make to your existing tools/machines and the things you fabricate are a reflection of what a genius you are. I am in awe of your talent and skills. You have my respect👍👌
Your skills are sick man!! Love the videos and the lack of talking and explaining every single thing is a blessing
Yes I say just this all the time “Less talk more work”
What’s crazy is I can’t listen for shit. I have to see to learn and this guy is one of the best for teaching. He evens hides his face and that is just a lil bonus
4444r
Actually i kinda wantes to know what was happening some talking and explaining would have been nice... cuz thats was the whole reason i picked the video .. was dor educational reasons
Maybe these vids ain’t for u if you need the words my friend. Never have I heard him speak. I feel like his work speaks a thousand words.
Gives me a real insight in to what bike engineers have to do to squeeze everything on to a frame ,very well done. Cheers from Aus
kzhead.info/sun/Z6uthb2Oi5ikn4k/bejne.html
The content you've been waiting for is finally uploaded 🤘
Not everything needs TIG welding. This channel really has come a long way since project 001! Great job on all your projects and building a great KZhead channel!
The way you film with different angles and zooms is just awesome. All around amazing talent. Bikes looks great but that seat makes my tail bone shiver lol.
Being a builder and a Welder that was craftsmanship at its finest. Salute to your hardwork
Must be first time I see someone in youtube, using thread tap correctly on drillpress 😄 Very nice fabrication work 👌
A first class welder and machinist always make things look easy. Great to see the impressive results.
Brother, this is masterpiece from your fabricating and machining skills to filming, video editing and production. I was entertained the whole time. This will pop in tens of millions of views.
566
6
214
4
Ùììììì
some of these shots are high tier movie quality, definitely earned my subscription
Genuinely impressed by your skills & abilities 👍🏽👍🏽
This was such a cinematic experience 😍
Once again a lot of seriously good fabrication resulting in a barely rideable death trap. You've done it again guys!
It's like watching a car crash that has been lovingly arranged for maximum carnage. I can't stop watching.
The composition of what you hear, see and create is fantastic
I look forward to each of your videos. What talent!
Wow! thats awesome!!
Thank you!
kzhead.info/sun/Z6uthb2Oi5ikn4k/bejne.html
What's up guys! We want to Thank you everyone for the support. Hope you enjoy the video!:)
েৃলক
I want to buy this what is this price
can you make a wheelchair?
what's the top speed and engine specs?
Sell me that bike
That's a piece of genuine craftmanship, AWESOME!
I’ve seen so many bad diy craft videos that it’s refreshing to see someone who can properly operate this machinery
Blown away👏 Absolutely amazing artist and engineer. He has more talent in one fingernail than I have in my entire life. Curious though, why that back tyre, possibly for the looks perhaps. That beautiful build needs a proper motorcycle tyre to extract the best handling.
kzhead.info/sun/Z6uthb2Oi5ikn4k/bejne.html
Mais um dos projetos mais que especiais! Parabéns!!! Um grande abraço de fã seu! Você é um Gênio!
kzhead.info/sun/Z6uthb2Oi5ikn4k/bejne.html
Awesome build and great fab skills!! Love it! Slow motion while doing threading on a lathe machine would have been so satisfying!
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👍😉grande projetista,Engenheiro ,mecânico, enfim ,construir do zero uma moto e para poucos:um dos melhores que já vi👍😉abraço do Brasil,Deus te abençoe !!!
As usual. A feast for the eyes. Excellent work all around.
Уже с самого начала видно, что мужик знает толк. Очень круто, очень. Очень крутая подача, съёмка, работа. Мне очень нравится, что он собирает все как конструктор Лего, как буд то он разобрал, а потом по мануала собирает в обратном порядке, слаженно, без ошибок, круто И музыка супер , особенно вначале
Просчёты инженерные присутствуют, но как для первого прототипа очень круто. Золотые руки.
You're an artist with engineering and fabrication skills. Impressive
The video is excellent. The music, the camera shots, the end product it all flows. A ton of work and looks great
Thank you! :)
Excelente video! Impresionante trabajo! Saludos desde Argentina 🇦🇷
Very impressive! I really admire your work.. You're an artist with engineering and fabrication skills. Impressive.
This guy makes it look like it’s so easy I could do it great job great video thank you
Looks really cool guys good work. 2 concerns we'll 3 actually having the exhaust so close to the seat might burn you, the gas tank is a bit to small, and the back tire is ment for off road want to see some of that! :) Other than those I want to say you guys are inspiring me to quit job and start fabricating business! Great craftsmen! Looking forward to seeing more.
Awesome talent, great to re cycle metals, keep up great job!!
kzhead.info/sun/Z6uthb2Oi5ikn4k/bejne.html
this what i call Extremely genius next lv mechanic and engineering skills...👍🏻👍🏻❤️
Best maker channel ever! Hands down!
It looks great and this KTM engine🤩 Amazing job 😁
Your skills absolutely amaze me with every video you put out!
Thank you! :)
Love from Rwanda
Amaaaaaazing 👏👏
Very impressive! I really admire your work.
Ооочень круто!Как всегда!Отличный канал с отличными идеями и их реализациями!👍🤝
Thank you! :)
Your videos are amazing and really motivating for aspiring builders. Was there ever a time where you built bikes without the fancy machinery? I’m wondering if you have any tricks for pressing bearings without a hydraulic press
Great project.Amazing talent!
I watched with great pleasure the process of creating a new bike, it turned out very cool! 👍👍👍Masters with golden hands.🤘😎
Τεράστιος 💪
Ευχαριστώ φίλε μου! :)
Incredible work congratulations, I think you could improve the stability of the bike if you replace the rear wheel with a motorcycle wheel, the cross section profile of the wheel you use is square as it is a car, that goes back to the motorcycle more unstable in curves and when leaning, motorcycle wheels have a circular cross section to be able to lean better, you can also improve the support of the tire, which holds the rear wheel by making a closed support with a slider, this will prevent stretching the chain and the nuts loosen, the wheel can come off the support while you roll, it improves the capacity of the fuel tank, perhaps changing the shape would give you more capacity than using a cylinder
Bi mp no p po
some people have so much talent! insane build!
This is what iron man said a true craftsman
Very cool!!!! 10 out of 10!
All I gotta say is, "mega" impressive, and pretty damn cool. 👍👍👍
Thank you! :)
You think you need a dealership, Ebay, or Craigslist to own and ride a bike? See those parts over there? Sit and relax while I explain without words. Great job; I wish you had the freedom/means to things like this every day; I could watch your lathe work for hours. *God bless.*
simply the best teacher
Μαστορα δεν εχω λογια! Εξαιρετικο βιντεο,ωραια και καθαρα πλανα,το κανεις να φαινετε παιχνιδακι ενω σιγουρα εχει αρκετη δουλιτσα. Ευγε για το εργο σου,οι κατασκευες σου ειναι σε αλλο επιπεδο,συνεχισε αυτο που κανεις,το κανεις καλα και με μερακι!
Σε ευχαριστώ πολύ φίλε για τα καλά σου λόγια!
Love your work keep it up
wish i could make one for myself, love the workmanship!
VERY IMPRESSIVE. NEED MORE VIDEOS LIKE THIS
Freakin awesome. You're one talented guy, I wish I had your skill and knowledge. I really like watching your channel and what you come up with. This reminds me of the show Monster Garage. Awesome job buddy
Thank you my friend! :)
@@MakeitExtreme no problem buddy. Thanks for the entertainment. I'm a carpenter by trade, but I really want to learn metal work like this. You make it look so easy hahah. Take care bud and be safe
@@MakeitExtreme hey bro block the scammer below me. I get em too. They're ridiculous
Nossa camarada ficou chol seu projeto parabéns
Tôi thích phông cách của bạn ❤️
Absolutely amazing video! One of the few 20+ minute videos where I didn't skip anything! That said, I was really tempted to because oh my god not every shot needs to have motion! The time lapses were amazing because they were a nice steady break. With every shot of you welding, or working on the frame being in motion it made it really difficult to tell what was actually happening. It also follows the same idea of "if everything is in bold, nothing is in bold" It would be really nice to sprinkle a couple tripod/static shots into the mix. Either way though, major shoutout to the film/edit and sound design of this! Good stuff!
this 1000%!!!
nice
XD
Nice, but I’d definitely think about routing the exhaust some other way. No way you will ever be able to ride that for more than a few minutes without getting unbearable. Great job putting it together. I always enjoy your videos.
Some exhaust wrap wold probably do if rerouting wasn’t an option
Is anyone appreciating this guy robotic movements like I am?
This is totally SICKKKKKK!!!
My only issue with this is the size of the tube you used for the swing arm I’d suggest using bigger
yup, id reinforce it with some vertical supports between both parts of the arm.
@@OutlawCRi or make a proper one from rectangular tubes. Current version is way to slim. Needs to be beefier. A few hard bump and it’ll bend a little each time.
@@OutlawCRi yes, a truss structure between both pipes wouldn't add much weight but a lot of stiffness and would still look good. But a general rule of thumb for me is, when I'm building things that could hurt me or someone else I would always simulate them in FEM before with enough of a safety margin 😄
Then build it yourself
@@erniegroocock4354 bro stfu we’re all just giving constructive feedback to help the guy out it’s not like we’re dishing out hate
Hey my guy, i appreciate your skills immensely, its beautiful to see all the fabrication work you make on the laid and the welding you do. I do however fail to understand why create such configuration with the ATV rear wheel. I think it made it way more complicated of a project as well as heavier and unrideable.
I think he went for the rear ATV tire because that's just a style he was looking for, which I think turned out pretty good, if he wanted something different, then he would have done something different, but this is what he wanted. And why do you say is unridable? Clearly it's not unridable, because he rode it, or did I miss something. Lol.
@@roypatterson9910 Hey my guy, honestly, I agree to you. I recently thought about this comment, as I try to not leave negativity anywhere, and, really, who the hell cares. The guy's a master and created something i won't be able to in 3 lifetimes. Who cares if i like it or not, nor does it matter.
Amazing opportunity I proud feel you
Very impressive! I really admire your work.. Very impressive build. Lovely design and awesome craftsmanship. :).
Somewhere there's a lawnmower racer wondering where one of his tires went.
Usj
@@akizulseek663 Well, ABC to you too brother. Have a good one.
What's the top speed? Do you know?
Billions dollar of knowledge and skills bro. I love it.
An Absolute masterpiece🔥🔥🔥
I love things like this. I made a hybrid tri-cart during college group project. I would like to see a few alterations. - 10% lower ride height, so rider won't tumble - Thigh support, for ride control. - Proper tyres, that accomodates it's look. - Electronics, you can diy lights & indicators.
Отличная работа! жаль что для такого ролика нужны месяцы кропотливого труда и переделок, всегда хочется все сделать с первого раза, будь здоров)
How can I not like it? Precision wow!
Without a doubt the most complicated do it yourself project Ive ever seen, so many things cud go wrong.
maybe you can add fenders on the front and rear with a futuristic concept to give a complete impression 😂
Отличный проект, сколько времени вы потратили на его создание? Мне очень интересно
Another masterpiece 🔥🔥
i like how creative you are with the editing and beats... fire fire!!!
Thanks for the vid! Great fast coupling engine idea! Probably the camera is moving too much - not sure about new filming style.
it's adhd tiktok style for people who have schizophrenia and need to constantly feel dizy and all characters on screen more frantically like it's a nightmare.
@@dimitar4y good thing I don't have TikTok
@@phillevchenko1156 you should feel horrified that the entire new two generations are EXCLUSIVELY on that app. It's like I'm watching a horror movie from the 50's with fast forward motion.
@@dimitar4y I do feel horrified.. unfortunately..
@@phillevchenko1156 Reminds me a bit of "Prodigy - Breathe" 's official video. Has that same vibe of excessive jumpcuts and crazy.
Wow. I am lost for words, what you did with the front fender Is .....just.....SEXY.
Amazing project as usual !!
That’s an exceptional skill set.👊🏽👏🏽
Everything was done awesome...except rear tire. Its worn out and the dimensions are a bit silly.
Love the outside the box thinking!!
I am an engineering student and seeing you make a bike out of scrap totally blew my mind....huge respect bro
I also want to make this type of bike in india can we work on it?
That was awesome! "Make it extreme or don't make it at all!"
Great videos love the ideas you come up with
Você é um artista! Saudações aqui do sul do Brasil.
The fabrication skills are amazing
The way he weld is just awesome 😍
This is might call concept master.
now that's something worth riding hell yell love the frame work let it shine
this is a beautiful project that you have built yourself
It's a real CUSTOM skills modification. 👌 👍👍👍👏🏻👏🏻
Wow the best idea for making motorbike
Amazing wonderful work Thank you , Make it Extreme