PCP Shan Bao Z Valve 3000 PSI for DIY PCP
2023 ж. 12 Мам.
32 073 Рет қаралды
PCP Shan Bao Z Valve 3000 PSI for DIY PCP
Link to buy:
Valve: s.click.aliexpress.com/e/_Ddr...
Bottle: s.click.aliexpress.com/e/_DDI...
PCP Shan Bao Z Valve 3000 PSI for DIY PCP
Link to buy:
Valve: s.click.aliexpress.com/e/_Ddr...
Bottle: s.click.aliexpress.com/e/_DDI...
Link to buy: Valve: s.click.aliexpress.com/e/_DdrMYVb Bottle: s.click.aliexpress.com/e/_DDIDqPJ
Do you have a link for the high pressure air pump you used?
@@LiquidArmored I dont recommend buying it, its too expensive. It is Gamo PCP Pump These are 4x cheaper and have exact same function Europe: s.click.aliexpress.com/e/_DF4IbVD Worldwide: s.click.aliexpress.com/e/_Dk5AawB
Is it regulated?
@@becks511 it's not sir, i gave information in previous replies
Do u sell ready made action kit ?
Thank you for this channel, I hope you put more contents on it! Would you be so kind to explain what's the difference between shorter (33mm) and longer (51mm) valves please? I mean, if someone is going to make his own custom air rifle there's no point in having two choices for the valve's lenght, right? I'm new to this world but I would like to learn more. Thank you!
Interesting so the valve body threads my be different depending on what brand it is nice to no very good video helps when building a air gun.
Не розумію виробників, чому роблять міжцентрову відстань 16мм? Балон 61мм не вилазить в Beeman QB78 або в кросман. Втрачають такий ринок споживачів.
Не розумію виробників, чому роблять міжцентрову відстань 16мм? Балон 61мм не вилазить в Beeman QB78 або в кросман
I need the smallest set. Howmuch is it.
Ijin nyimak videonya boos..🙏👍👍👍🤝
Can you sgow us one of ur rifels that u build with that Mechanism
yes, just finished editing i plan to upload in the next 24 hours
Hw much per set.
Cómo se tama el regulador k es como seta
Hi what to do when air leaking too much on first pumps.
Pull the valve pin backwards a bit, hanging the bottle and valve in their in the air by the pin could be enough to hold the air back, just pump with one arm
Order di mana gan
Can you please ttest the accuracy with the airgun for that bottle
the bottle shouldnt affect the accuracity
@@pcpairgunschannel I want to buy so can you please do something for me
friend, with how many jaules of power this rifle will be ???
Depends on the barrel length caliber and hammer spring. I have seen someone build a 120 joule air rifle in 9mm I myself built one in 177 cal, and the hammer spring is super easy to change. With a weaker 19mm od 1.2mm wire diameter spring, which is super easy to load I got about 22-25 joule. Then with a 1.2mm wire dia 14mm od spring I got 31-35 joules, but that was a bit hard to load as the spring was in unbalanced. I will be changing to a 19mm od 1.5mm wire diameter spring, don't know how much power that will have but I think around 35-45 joule range is achievable with a spring like that.
Update: Now with the same weak 19mm od 1.2mm wire diameter spring im getting 35-40 joule. All I did was remove the valve spring and used a bit thinner seal (the white tiny rod that holds the valve' air). I'm very impressed at how much power such a weak spring can generate in 177cal. Can't wait to try the stronger spring, it would be insane for 177cal.
E compatível com o kit urko?
qual é o diâmetro interno do tubo dessa pistola de ar? o tubo que tem o martelo dentro
I want one
Nh bang kalow yang ituh berapa harga nahh
Donde consigo el magasin
amazing
Glad you think so!
Pesannya dimana bosku
Shan Bao & Superwell which one is regulated?
neither is, you need to add a regulator
@@pcpairgunschannel bro which one regulator is suitable for superwell? Can u provide me the link?
@@becks511 you can buy it on aliexpress, there are lots of different regulators adjustable valve: s.click.aliexpress.com/e/_DExfwzT unadjustable regulator: s.click.aliexpress.com/e/_DBBJqvF externally adjustable valve: www.aliexpress.com/item/1005005334946047.html with the unadjustable one remember to use M18x1.5 thread one and not the 5/8 one unless you know that you have a different type of bottle with a 5/8 thread
Can u give me ur whatsapp no?
Gimana cr mesan nya bos
Bang harganya brp ya yg itu
Which is better? Shan bao or superwell?
From my experience superwell was better, I think the machining is better with superwell and it's also more precise, Shanbao valve was meant for 32mm tube but it seems that a 30.8mm tube is what fits way better. at 2600 PSI the Superwell valve produced 32ftlbs using a 177 cal barrel 60cm long. Shanbao produced only 7 ftlbs using the same barrel and spring. So clearly it get's locked probably due to the valve POM rod having a completely flat surface against the valve housing and being 8mm thick when the Superwell one was 7mm (I decreased the pressure to around 1800-1500 PSI and then got higher results, so it's probably meant to be used with a regulator) Also later on I switched the POM pin of the shanbao valve to the superwell POM pin, and got the same results as the superwell valve
@@pcpairgunschannel thanks for that info, I have seen a shan bao with a larger built-in plenum, good for regulated pcp project.
Can I get both of yours Whatssapp number?
@@pcpairgunschannelcan you link the superwell please
@@Afeller kzhead.info/sun/g8yAl5eFmpp4gJ8/bejne.html here's a video on it, if you wanna buy it links are in the video's description
how much in one set?
depends on your country, the valve can vary from 30$-50$ and the tank 18$-30$. If you wanna buy, i left links in the description and the pinned comment
Saya mau pesan barang itu bang
tautan dalam deskripsi
Made in indonesia rp.500.000
yes, there prices are better