KZhead

Making BIG GAME PCP 4000 PSI Valve and Tank

PCP Air Guns
2024 ж. 30 Нау.
210 068 Рет қаралды
Жүктеу

In this video I'll be making a valve and a connector for a manometer and a fill nipple for a stainless PCP tank, the maximum pressure is 4000 PSI, but to ensure safety I recommend 3500 PSI. Keep following this series of videos and you'll see the finished version soon, it will be really powerful in just 4,5mm. I am expecting around 1100-1200 fps minimum using a 15.4 grain slug.
LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): s.click.aliexpress.com/e/_DlY...
Asia link: s.click.aliexpress.com/e/_Dlt...
Parts, tools & materials:
25mm brass rod: s.click.aliexpress.com/e/_DCF...
27x2mm 304 tube: s.click.aliexpress.com/e/_DeT...
pressure gauge: s.click.aliexpress.com/e/_Dnm...
fill nipple: s.click.aliexpress.com/e/_DDG...
20.3mm O-ring: s.click.aliexpress.com/e/_DnS...
HSS mills: www.aliexpress.com/item/10050...
drill bits: s.click.aliexpress.com/e/_Dm2...
3.9mm drill bit: s.click.aliexpress.com/e/_DlZ...
center drills: s.click.aliexpress.com/e/_DDa...
m10x1 tap: s.click.aliexpress.com/e/_DFN...
m6x1 tap: s.click.aliexpress.com/e/_DCJ...
POM rod: s.click.aliexpress.com/e/_DBm...
teflon rod: s.click.aliexpress.com/e/_DE8...
4mm steel rod: s.click.aliexpress.com/e/_De3...
grub screws: s.click.aliexpress.com/e/_Ddi...
countersunk screw: s.click.aliexpress.com/e/_DCn...
sanding tool: s.click.aliexpress.com/e/_DFW...
brass tube: s.click.aliexpress.com/e/_DeW...
silicone oil: s.click.aliexpress.com/e/_DFY...
10mm thick spring: s.click.aliexpress.com/e/_DkM...
7.5mm o ring s.click.aliexpress.com/e/_Dml...

Пікірлер

  • Nice work! Very interesting process

    @LowkeyAirgunner@LowkeyAirgunnerАй бұрын

  • i always love your video pcp airgun for life

    @benoitdudzik8010@benoitdudzik801027 күн бұрын

  • Thanks for this share

    @JamesBrown-qn5lz@JamesBrown-qn5lzКүн бұрын

  • great talent.good job bro🤜🤛

    @jalhuntph@jalhuntph13 күн бұрын

  • This Video should called...how to build a bomb

    @ztejerzkztktzfrkt8527@ztejerzkztktzfrkt852728 күн бұрын

  • This actually call in my country is "pcp jowo/timbangan gaplek".....nice project👍👍

    @samnipi1889@samnipi188925 күн бұрын

    • Yes bro, this is heavily inspirated by indonesian PCP jawa

      @pcpairgunschannel@pcpairgunschannel25 күн бұрын

  • Nice work on the lathe

    @ramone79@ramone79Ай бұрын

    • Thanks 👍

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • Iki jelas wong indo seng ngerantau neng negara 4 musim. Nice project bro

    @orangkaya6683@orangkaya668316 күн бұрын

    • haha terimakasih mas

      @pcpairgunschannel@pcpairgunschannel16 күн бұрын

    • Ane dah curiga dr awal pemilik channel ini org indo sih wkwkkwk

      @kerahledrek@kerahledrek8 күн бұрын

    • ​PCP airguns channel UU you uuuuuuuuuuu uuuuuu7uuuuuuuuuuuuuuu😢 my pp

      @AnthonyTasin@AnthonyTasin2 күн бұрын

  • Very Nice

    @sniperkota428@sniperkota428Ай бұрын

  • Nice video mr..👍👍👍♥️ god job !

    @CyberHunter512@CyberHunter512Ай бұрын

    • ❤️❤️❤️

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • thanks you br

    @pawitmon2583@pawitmon258327 күн бұрын

  • Please upload next part Love from India ❤👍

    @Inoinovation@Inoinovation17 күн бұрын

    • coming soon bro.

      @pcpairgunschannel@pcpairgunschannel17 күн бұрын

  • Nice work 👍👍 watching New friend from Phillipines 🤝🤝🙏👍👍

    @airhunteroutdoor2740@airhunteroutdoor274022 күн бұрын

  • Nice sharing💖👍

    @ayahsadam9817@ayahsadam981726 күн бұрын

    • Thanks for visiting

      @pcpairgunschannel@pcpairgunschannel26 күн бұрын

  • It's good to have the new toolsأ. Congratulations... great job. The best thing in the video is visualizing the sizes and dimensions.. Great work, keep it up and we are waiting for the rest of the manufacture of the air rifle from the reciger, the gun, and all the parts of all sizes and dimensions.. Greetings from Egypt

    @ameenattef469@ameenattef469Ай бұрын

    • Thank you very much❤️

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • Top power

    @sniperkota428@sniperkota428Ай бұрын

  • Excellent want more

    @robertsimpson6324@robertsimpson6324Ай бұрын

    • Coming soon

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • If possible, the valve shaft must use a thread to enter the Tevlon. Prone to breaking often hit by a hammer.

    @Pierchinggun@Pierchinggun27 күн бұрын

    • It's ok, this will work

      @pcpairgunschannel@pcpairgunschannel27 күн бұрын

  • Like pcp jowo 👍👍 good job my friend

    @DailyHunter88@DailyHunter8824 күн бұрын

    • yes, its inspirated by indonesian pcp jawa

      @pcpairgunschannel@pcpairgunschannel24 күн бұрын

  • Internal diameter 23mm. 11.5x11.5x3,14=415 mm2 (4,15cm2) 1 bar=10N/cm2 4000psi = 276 bar. So… you hold back 276x 10x 4,15 N =11454 N with a couple of little screws. Reckon with only one; they don’t bear equally and when the first snaps, then the second may well go too. Mind that the screw itself M6 has a core surface of 2.38 x 2.38 x3.14 mm =17,8mm2. If the quality is 8.8, the tensile strength is 800 N per mm2, starting to yield at 80% or 640N. For a shearing load as the screw experiences here, we take 80% of that value. We are then left at 512N/mm2 x17.8 mm2 or a load of 9113N at which the screw will probably fail. With 11454N … you are a lucky bastard. And please, dont grease O rings on a cloth full of chips.

    @Calligraphybooster@Calligraphybooster26 күн бұрын

    • this is a very common way to do it. the grub screws arent the only thing holding it but the inlet valve too, which is a lot thicker

      @pcpairgunschannel@pcpairgunschannel26 күн бұрын

    • If I may know, what is the safe pressure for the tube?

      @lukmankhakim5568@lukmankhakim556821 күн бұрын

    • ​@@lukmankhakim5568 the tube is 304 stainless steel, 27mm OD 2mm wall thickness. Using barlow's formula the burst pressure is 10958 PSI, and therefore the safe pressure would be 3652 PSI if we use 1:3 safety factor which is commonly used for air gun tanks.

      @pcpairgunschannel@pcpairgunschannel21 күн бұрын

    • @@pcpairgunschannel For a tube thickness of 1.5mm, what is the safe pressure?

      @lukmankhakim5568@lukmankhakim556821 күн бұрын

    • @@lukmankhakim5568 Depends on the od, if you used a 27mm 304 SS tube like me, then 2700 PSI. 25 OD is more common for 1.5mm wall thickness tubes, for those it's 2958 PSI

      @pcpairgunschannel@pcpairgunschannel21 күн бұрын

  • i think i know that minilathe model. You can easily disengage lead screw gears from spindle - it will make a lot less racket :)

    @grzegorzdomagala9929@grzegorzdomagala9929Күн бұрын

    • Yes, I should do that. It is a vevor 7x16 mini lathe

      @pcpairgunschannel@pcpairgunschannelКүн бұрын

  • Top mase salam dari indonesia❤

    @krisbiyantoro3989@krisbiyantoro398916 күн бұрын

  • 👍👍👍👍

    @dididodok3616@dididodok3616Ай бұрын

  • 👍

    @hyuflhyup7368@hyuflhyup7368Ай бұрын

  • What kind of oil do you use for O-rings?

    @jandeeg152@jandeeg1528 күн бұрын

    • Silicone oil, or any synthetic oil. Petrolum based oils will destroy the rubber. s.click.aliexpress.com/e/_Dl3RL1z

      @pcpairgunschannel@pcpairgunschannel8 күн бұрын

    • @@pcpairgunschannel Mind you, oil together with highpressure oxygen can be dangerous, you’d better use lithium grease. BUT……., your video is great!

      @jandeeg152@jandeeg1528 күн бұрын

    • @@jandeeg152 yes, oils can combust under high pressure oxygen. But this is not pure oxygen I am using, its just air. Therefore combustion of the oil isn't likely

      @pcpairgunschannel@pcpairgunschannel8 күн бұрын

  • Part 2 next please

    @yantoong567@yantoong56725 күн бұрын

    • in about 1 week it'll be done, still waiting for some materials to arrive.

      @pcpairgunschannel@pcpairgunschannel25 күн бұрын

  • You finally got a lathe, how much did you pay for that and what brand?

    @airsight2753@airsight2753Ай бұрын

    • It is a vevor 7x16 mini lathe, it was 730$. Now lets see when I am getting a milling machine.

      @pcpairgunschannel@pcpairgunschannelАй бұрын

    • @@pcpairgunschannel same price here, make a mini lathe review, i am planning to buy soon.

      @airsight2753@airsight2753Ай бұрын

    • @@airsight2753 let's see! 👍I'll be waiting to see what you'll make with a lathe!

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • Pcp jowoooooooo

    @bima1599@bima1599Ай бұрын

  • Indonesian pcp ( pcp jawa ) 👍🏿👍🏿

    @ichalalamri5884@ichalalamri588419 күн бұрын

    • yes bro, i took inspiration from it.

      @pcpairgunschannel@pcpairgunschannel19 күн бұрын

  • This mechanism is recommended for high pressures

    @earphone_13@earphone_13Ай бұрын

    • Yes, 4000 PSI max

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • So far, that will only blow away snow. Where is the rest of the 4000psi Big Game pcp rifle? LOL

    @redgum1340@redgum1340Ай бұрын

    • Sir this is part 1, I will still build the chamber, Stock, trigger hammer etc

      @pcpairgunschannel@pcpairgunschannelАй бұрын

    • Di Indonesia This 2mm Monel material is made with 6 bolts and a pressure of 4500psi. 180cc cal32mm 8shoot 1100fps can be produced.

      @Pierchinggun@Pierchinggun27 күн бұрын

    • @@Pierchinggun i think 4500 psi is a bit too much. The burst pressure is 10800 PSI. depending on the steel alloy, of course.

      @pcpairgunschannel@pcpairgunschannel27 күн бұрын

  • Saya menantikan dan memimpikan power itu digunakan laras lubang 12mm, karena di Indonesia sangat mengerikan untuk dibuat 😅

    @endrymargam7863@endrymargam786323 күн бұрын

    • ya, saya dengar kaliber legal terbesar di Indonesia adalah 4,5 mm

      @pcpairgunschannel@pcpairgunschannel23 күн бұрын

  • the barrel installation part bro

    @kiasubandari48@kiasubandari48Ай бұрын

    • yes bro, patiently wait for the rest of the building videos. Next I will make a trigger and a hammer to open the valve, then later on i will continue with chamber making etc....

      @pcpairgunschannel@pcpairgunschannel29 күн бұрын

    • @@pcpairgunschannel okay, waiting for the next part, keep up the enthusiasm

      @kiasubandari48@kiasubandari4829 күн бұрын

  • Joss

    @AgustianTyan@AgustianTyanАй бұрын

  • MASHALLAH DEAR I WANT A PIECE OF TANK FROM PAKISTAN HOW I WILL GAIN IT

    @muhammadjanab8023@muhammadjanab802313 күн бұрын

    • Sorry bro I can’t send this overseas for legal reasons…

      @pcpairgunschannel@pcpairgunschannel12 күн бұрын

  • jeroane oblak bos😂

    @genarboket291@genarboket29126 күн бұрын

  • I hope you can translate it into Arabic because it is not available in the video settings. Thank you for your wonderful effort

    @ameenattef469@ameenattef469Ай бұрын

    • I’ll look for time to add captions.

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • Good video but I'm not sure I'd trust that with 4000 PSI

    @WarlordEnthusiast@WarlordEnthusiast16 күн бұрын

  • Why not use titanium alloy tubes

    @huazhong208@huazhong20814 күн бұрын

    • You can but they are expensive

      @pcpairgunschannel@pcpairgunschannel14 күн бұрын

    • @@pcpairgunschannel It’s a pity that China can’t play

      @huazhong208@huazhong20814 күн бұрын

    • @@huazhong208 Yeah man, airgunning is definitely a fun hobby. Where are you from in China?

      @pcpairgunschannel@pcpairgunschannel14 күн бұрын

    • ​@@pcpairgunschannelSir I am from Jiangxi Province, China😄

      @huazhong208@huazhong20814 күн бұрын

    • This steel pipe can withstand 3500psi, which is equal to 240bar? brother

      @huazhong208@huazhong20811 күн бұрын

  • Pcp original made indonesia..

    @budibudianto2758@budibudianto2758Ай бұрын

    • yes, pcp jawa

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • BG bisa pesan Senpan ka,,,dri ntt

    @GercyanAdar@GercyanAdar6 күн бұрын

    • maaf mas, saya tidak bisa menjualnya

      @pcpairgunschannel@pcpairgunschannel6 күн бұрын

  • Indonesia pcp big game

    @dennyavian9280@dennyavian928025 күн бұрын

    • 😎

      @pcpairgunschannel@pcpairgunschannel25 күн бұрын

  • Bisa cod ke malaysia

    @dinarashiloddean2264@dinarashiloddean226417 күн бұрын

    • maaf bro, saya tidak dapat menghantar pakej saya atas sebab undang-undang. Saya hanya membuat video untuk orang ramai melihat pembuatannya

      @pcpairgunschannel@pcpairgunschannel17 күн бұрын

  • Rentan jebol

    @cddphunter7991@cddphunter799122 күн бұрын

  • Mấy ông này phải gặp VN họ làm bằng inox chạy ren hết chứ đồng nó rễ gia công nhưng làm chĩ kiểu này tháy nó không mấy an toàn

    @lichphung6928@lichphung6928Ай бұрын

    • đây là một cách phổ biến để làm điều đó

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • mini bomb??????????

    @khotinh3538@khotinh353828 күн бұрын

  • You probably won't be able to get a hammer to open your poppet valve. It has too much surface area and pressure pushing against it.

    @JETHO321@JETHO321Ай бұрын

    • I will, i can open it by hitting it with a steel rod like this, and it releases a good amount of air already (it may not seem like that in the video because the sound echoed all around). The hammer I will make definitely will hit at least as hard as I did with a steel rod

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • like indonesian pcp

    @vikiwahyudarmawan6374@vikiwahyudarmawan6374Ай бұрын

    • PCP jowo bro😂

      @FeriIbah@FeriIbahАй бұрын

    • @@FeriIbah nahh betull😁

      @vikiwahyudarmawan6374@vikiwahyudarmawan6374Ай бұрын

    • Yes, i took inspiration

      @pcpairgunschannel@pcpairgunschannelАй бұрын

    • ​@@pcpairgunschannelfirst look i thing you from indonesia or some place in asia, but when i check yuor profile you from finland 😂😂

      @rizaniotox634@rizaniotox634Ай бұрын

    • @@rizaniotox634 it's true

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • и для чего нужна данная фигня ??????

    @user-Berefin@user-Berefin19 күн бұрын

    • это бак и клапан пневматического пистолета...

      @pcpairgunschannel@pcpairgunschannel19 күн бұрын

    • @@pcpairgunschannel А стрелять он будет походу из за угла . Так как бьет эта длинная трубка с боку

      @user-Berefin@user-Berefin19 күн бұрын

    • @@user-Berefin Нет, вы увидите в следующих видео

      @pcpairgunschannel@pcpairgunschannel19 күн бұрын

  • BG mntaa no wa nya BG,spya sy hbng,dri ntt

    @GercyanAdar@GercyanAdar6 күн бұрын

  • Sopp thuy duong lừa đảo nha các bạn

    @vankietnguyen7749@vankietnguyen774914 күн бұрын
KZhead