KZhead

Homemade Air Rifle Building with a Magazine

PCP Air Guns
2024 ж. 2 Мам.
854 655 Рет қаралды
Жүктеу

In this video you'll see how I built a multishoot air rifle. This video shows the building of the trigger and the hammer, but the breech is a Crosman multishot breech. It uses a 0.5 L tank, gets 40 shots at 35 joule, 1200-1250 FPS using 7.8 grain pellets. With heavier pellets would probably be around 40-45 joule.
Valve: s.click.aliexpress.com/e/_Ddr...
Bottle: s.click.aliexpress.com/e/_DDI...
Video of valve & bottle: • PCP Shan Bao Z Valve 3...
Parts:
Crosman 2240 breech: gmaccustomparts.com/multi-sho...
32mm OD aluminium tube: s.click.aliexpress.com/e/_DeH...
Trigger spring: s.click.aliexpress.com/e/_DEd...
Stainless Steel sheet: s.click.aliexpress.com/e/_DCp...
Spring for hammer: s.click.aliexpress.com/e/_DDf...
2.5mm steel rod: s.click.aliexpress.com/e/_Dk9...
Aluminium plate for trigger housing: www.aliexpress.com/item/32961...
M4 Breech screw: s.click.aliexpress.com/e/_DnL...
20mm Steel rod: s.click.aliexpress.com/e/_DdE...
Grub screws: s.click.aliexpress.com/e/_DD6...
M4 Round connector: s.click.aliexpress.com/e/_DEn...
M3 Breech screw: s.click.aliexpress.com/e/_Dn1...
O-ring: s.click.aliexpress.com/e/_Dcj...
M4 Countersunk screw: s.click.aliexpress.com/e/_Dcy...
Drill bits: s.click.aliexpress.com/e/_DC7...
Sanding stone tool: s.click.aliexpress.com/e/_Dei...
Thread taps: s.click.aliexpress.com/e/_DCr...
Sandpaper tool for drill: s.click.aliexpress.com/e/_DEg...
Rotary file: s.click.aliexpress.com/e/_DEb...

Пікірлер

  • Reminded me of times of my youth, you got another sub. I may have built a few similar things back then. I only had very basic hand tools and no internet.

    @DB-yj3qc@DB-yj3qc6 ай бұрын

  • I love this video its such an inspiration for people who dont want to buy expensive guns and want to have fun building and modifing their own

    @colincls4590@colincls45906 ай бұрын

  • Unbelievable patience. Took 6 years to make this not to mention 320 bur bits, 220 drill bits, and 68 files. Great job for hand tools. Definitely a good person to know should an apocalyptic occurrence take place.

    @oeg111@oeg1113 ай бұрын

  • Nice making airgun Rifle ayos yan boss...

    @putianyolando8432@putianyolando84326 ай бұрын

  • This video is soo needed! thank you!

    @ReavinBlue@ReavinBlue6 ай бұрын

  • This is a true inspiration. Obviously, nobody told this guy you can't do that that's awesome I love it

    @rubbercityhair24@rubbercityhair246 ай бұрын

  • Made me reach for my tool kit, lucky I have a Centre Lathe and drill press!

    @daviddunn748@daviddunn7485 ай бұрын

  • A true inspiration. 👏👏👏

    @TANAXdirecto@TANAXdirecto6 ай бұрын

  • Absolutely fantastic!! New subscriber here and I love building my own toys. Thank you so much for the information.

    @johnkoury1116@johnkoury11163 ай бұрын

  • the only machine i see in this video is the drill . but this guy have done very beautiful finished rifle . can u imagine if he have a complete machine tool . great job dude . 🎉

    @czulroslan4302@czulroslan43024 ай бұрын

    • Thanks 🤩🤩I plan buying a lathe.

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Perfect Work!!!! Seeing your video, I feel amazed and thank you for sharing this video and success always "PCP ......."....Pekalongan, Central Java, Indonesia

    @mbahcarrier1629@mbahcarrier16295 ай бұрын

  • Exelente aporte de video

    @GRUPODEJUNIO@GRUPODEJUNIO9 ай бұрын

  • great build well done

    @mussydesign7933@mussydesign79332 ай бұрын

  • Each of us will trade him a machine tool in exchange for a finished gun. 👍

    @foam27@foam276 ай бұрын

  • Where did the magazine and the reciever come from?

    @randomscience4all@randomscience4all8 ай бұрын

    • gmaccustomparts.com

      @pcpairgunschannel@pcpairgunschannel8 ай бұрын

  • Nice idol may idea na ako

    @jbmsdiymixedvlog3978@jbmsdiymixedvlog39788 ай бұрын

  • An automatic center punch and some cobalt drills would make your life better. Well done with limited tools though.

    @renegademachineect.@renegademachineect.5 ай бұрын

  • Very good friend! Tanks !

    @Canal_baixa_potencia@Canal_baixa_potencia6 ай бұрын

  • done na po idol.watching

    @amiananhuntermixph@amiananhuntermixph7 ай бұрын

  • Excellent work

    @ANOAR97@ANOAR978 ай бұрын

  • Keep up the good work, mate! You more than earned my sub!

    @sjp4995@sjp49952 ай бұрын

  • Amazing

    @Bangsoljirak@Bangsoljirak7 ай бұрын

  • where can you buy a rifle barrel with the firing pin and the magazine? Thanks

    @berndfeldner7611@berndfeldner76115 ай бұрын

  • I looked everywhere but couldn't find a barrel with a bolt and magazine anywhere. I would be very happy if someone would help me

    @berndfeldner7611@berndfeldner76115 ай бұрын

  • We are waiting for more of your good videos. How to make the receiver, its sizes and dimensions, the depth of the drilling, and the method of making the wooden dipstick, final assembly.. Greetings, your follower from Egypt

    @ameenattef469@ameenattef469Ай бұрын

  • Hi! May I ask, how did you ensure that the tubes would telescope and do you have advice for making a .50 cal pcp air rifle with a magazine?

    @Afeller@Afeller5 ай бұрын

    • Sorry, I don't know which tubes you are talking about so please specify. About the .50 cal with a magazine, i can't say much about the magazine. You can check how the magazines work and try to create one. The .50 cal pcp is like any other pcp, but just has a valve with larger transfer holes, probably a stronger hammer, and a larger caliber obviously

      @pcpairgunschannel@pcpairgunschannel5 ай бұрын

  • If you unscrew the universal valve Wich will no longer be needed and then make a adapter with 16.1m male threads on one side and on the other side thread it the same as a crossman valve cap it will work as a plenum adapter between the drop block and valve. then you can use crossman part's to build the rest of the air gun 💯🛠️🎯👍✌️🍻🇺🇸

    @josephsaucedo8691@josephsaucedo86918 ай бұрын

  • Wow, glad it worked without exploding. Was that stock attached with zip ties??😱😱

    @mickwilson127@mickwilson1273 ай бұрын

  • Sir pwedi bang de bumba na air gun combert sa co2 air gun?

    @user-zm7iz3fe1t@user-zm7iz3fe1t3 ай бұрын

  • Great and inspiring video! Where did you get the magazine? do you know if any brand has trigger systems?

    @arturpedrosa745@arturpedrosa7455 ай бұрын

    • I bought it from gmaccustomparts.com that site doesn't seem to be very active anymore, so you can search on eBay stuff like "Crosman 2240 breech".

      @pcpairgunschannel@pcpairgunschannel5 ай бұрын

  • I wish i could have 1 for Christmas

    @tiwaxisios2743@tiwaxisios27435 ай бұрын

  • Someone give this man some machine tools

    @michaelabraham9177@michaelabraham91776 ай бұрын

    • you give him modern machine tool, he will create an atomic bomb

      @leechSenses@leechSenses6 ай бұрын

    • @telingalintah I'm not sure how seriously you intend this lol. A kid named David Hahn built a nuclear reactor in his mother's back yard at age 17. Innovation, and inventiveness is a lot more important than modern tools. The oklo reactor in Africa has been around for at least 1000s of years. Some scientists say it formed by chance, but more credible researchers point out the engineering involved and say there's no chance it was accidental. You cannot keep some innovators down. I do not believe our friend here is a megalomaniac. If he is we better be on his good side lol cause he's obviously willing to put in the work.

      @michaelabraham9177@michaelabraham91776 ай бұрын

    • ​@@leechSensesiii>>ii>ii>ii

      @leonardoloaisiga4997@leonardoloaisiga49975 ай бұрын

    • 😅😅😅😅😅😅😮

      @quantri9981@quantri99815 ай бұрын

    • so where can i donate $10 to him for tools?

      @petfrogg@petfrogg4 ай бұрын

  • output speed is very good

    @yasaryldz-tm3xe@yasaryldz-tm3xe14 күн бұрын

  • Saan po nabili Yung upper receiver. Yung kulang balck

    @acejohnjacinto6433@acejohnjacinto643310 күн бұрын

  • Simply OUTSTANDING!👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍

    @catherineharris4746@catherineharris47467 ай бұрын

  • Where do you buy the barrel?

    @pablocabrerizo68@pablocabrerizo687 ай бұрын

    • Gmaccustomparts.com

      @pcpairgunschannel@pcpairgunschannel7 ай бұрын

  • Among haba Ng pellet pusher?

    @user-px5fe6wr7o@user-px5fe6wr7o6 ай бұрын

  • 尊敬的先生，我佩服你的堅韌，佩服你如今難得一見的手工技藝。然而，看著用旋轉銼刀鑽孔、鑿孔、銼削和挖出的槽，看起來是如此粗糙、尷尬和醜陋。請抓住第一次機會，為自己買一台銑床！ 儘管您使用的是漂亮的鋼鋸，但看著您用手切割所有金屬庫存還是非常痛苦的。我感受到了你的痛苦，即使在超雙速幀播放時也是如此。銑床之後您的下一個工具，，，給自己買一把帶鋸！即使是簡單的往復鋸，您也會感激不盡！當然，您可能也想要一台車床... 所以一台銑床、一台帶鋸和一台車床，你就會是金色的，你會像龍一樣金色，金龍。龍年吉祥，龍年吉祥，新年快樂。 做得好！手藝不錯！謝謝你分享你的手藝 Zūnjìng de xiānshēng, wǒ pèifú nǐ de jiānrèn, pèifú nǐ rújīn nándé yījiàn de shǒugōng jìyì. Rán'ér, kànzhe yòng xuánzhuǎn cuòdāo zuǎn kǒng, záo kǒng, cuò xuē hé wā chū de cáo, kàn qǐlái shì rúcǐ cūcāo, gāngà hé chǒulòu. Qǐng zhuā zhù dì yī cì jīhuì, wèi zìjǐ mǎi yī tái xiǎnchuáng! Jǐnguǎn nín shǐyòng de shì piàoliang de gāng jù, dàn kànzhe nín yòng shǒu qiēgē suǒyǒu jīnshǔ kùcún háishì fēicháng tòngkǔ de. Wǒ gǎnshòu dàole nǐ de tòngkǔ, jíshǐ zài chāo shuāng sù zhèng bòfàng shí yěshì rúcǐ. Xiǎnchuáng zhīhòu nín de xià yīgè gōngjù,,, jǐ zìjǐ mǎi yī bǎ dài jù! Jíshǐ shì jiǎndān de wǎngfù jù, nín yě huì gǎnjī bù jìn! Dāngrán, nín kěnéng yě xiǎng yào yī tái chēchuáng... Suǒyǐ yī tái xiǎnchuáng, yī tái dài jù hé yī tái chēchuáng, nǐ jiù huì shì jīnsè de, nǐ huì xiàng lóng yīyàng jīnsè, jīnlóng. Lóng nián jíxiáng, lóng nián jíxiáng, xīnnián kuàilè. Zuò dé hǎo! Shǒuyì bùcuò! Xièxiè nǐ fēnxiǎng nǐ de shǒuyì

    @dougroundup7315@dougroundup73152 ай бұрын

    • 先生非常感謝您！ 我實際上剛買了一台迷你車床。 稍後我會買一台銑床，因為在車床上開槽並不是很精確的工作。

      @pcpairgunschannel@pcpairgunschannel2 ай бұрын

  • Cool

    @penguinclips9551@penguinclips95518 ай бұрын

  • can you make a semi auto version?

    @SandiShila@SandiShila6 ай бұрын

  • Estoy de acuerdo con algunas partes del video que lo aligeren pero no cuando es más informativo.

    @eduardosevilla5915@eduardosevilla59158 ай бұрын

  • bravo

    @mejdi2007@mejdi2007Ай бұрын

  • Dude! Nice! I started building one similar....technically I ordered all the stuff I need to do it lol. But very similar idea. I decided to watch urs closer incase of any good ideas to learn from. I'm using a 24 inch crosman barrel with metal breech an suppressor I ordered from (buck rail) that will be here tomorrow, I have a .5 liter air tank setup almost identical to urs. My grip an trigger are coming off a crosman 1322 I ordered that will be here Friday along with the aluminum tubing I ordered. I have an idea that I'm gonna do to try going next level with this. More power, sniper barrel, change caliber to a 223! That includes special 223 rounds out of pure lead. If interested, I'd be happy to share that information with u. The sniper barrel with 223 ammo is easier then everything u just went through, so I have no doubt u can do it lol

    @williamfausett5200@williamfausett52002 ай бұрын

    • Interesting, i'd love to see this PCP once you have made it!

      @pcpairgunschannel@pcpairgunschannel2 ай бұрын

  • Sir saan po makakabili Ng receiver

    @EddieLAgad@EddieLAgad6 ай бұрын

  • bubby get a few pieces of steel and some machine screws . make you some ways to hold a peace that would fasten a peace of high-speed steel to it and create a fulcrum point the attaches to the part that slides between the ways i mentioned and put a handle on it and you have way to broach holes put a vice at one end and your days of drilling job like that are over . not to mention your slots will be far more square from Jump Street., you could do te dame then I'm talking with a drill press as well with just with some ground high speed steel . and a work-holding vice to get your lateral movement. all that to save you some time and aggravation guy

    @ronwhittaker6317@ronwhittaker631711 күн бұрын

  • I would like the plans on how you made it

    @stansmith1911@stansmith19116 ай бұрын

    • They are literally in the video!😂

      @ohdehhan@ohdehhan6 ай бұрын

  • Regulator price

    @wungramvashim1236@wungramvashim12367 ай бұрын

  • Where can I find that color black. Upper receiver

    @acejohnjacinto6433@acejohnjacinto643310 күн бұрын

  • А от какой винтовки ствол и ствольная каробка

    @user-gg3yi9ko5w@user-gg3yi9ko5w3 ай бұрын

  • สุดยอดเลยครับ

    @appleapple8469@appleapple84696 ай бұрын

  • Good job can i have link for receiver where you buy?

    @JhojoeGaming@JhojoeGaming3 ай бұрын

    • gmaccustomparts.com, i dont recommmend buying it, its discotninued and really expensive.

      @pcpairgunschannel@pcpairgunschannel3 ай бұрын

  • Brother thank very now I make airgun thànk véry mutch

    @serapiondelatorre5213@serapiondelatorre52133 ай бұрын

  • Sei bravissimo a creare contenuti! Buona fortuna a te!

    @user-le9eb3jj5b@user-le9eb3jj5b4 ай бұрын

    • 🤩👍

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Great work.. Is it possible for you to have a video explaining how to make a black receiver, step by step, please? Your follower is from Egypt. my regards

    @ameenattef469@ameenattef4692 ай бұрын

  • sir magkano ganyan walang butt

    @ronaldque722@ronaldque7226 ай бұрын

  • Damn, that’s awesome. Now make one in .50 caliber🤣

    @sethmullins8346@sethmullins83464 ай бұрын

    • maybe one day 👍

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Vc e o cara muito bom o trabalho parabens laik

    @fabiosousa-vk5xw@fabiosousa-vk5xw4 ай бұрын

    • ❤

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Ma ti riuscirebbe farlo arrivare a 70 jouoe?

    @thomascarboni7727@thomascarboni77276 ай бұрын

  • Imagine what this dude could do with a mill and lathe 😮😮😂😂

    @Loli.slayer@Loli.slayer2 ай бұрын

    • I actually just got a mini lathe! A milling machine would help a lot though, but I'll begin doing works with a lathe now.

      @pcpairgunschannel@pcpairgunschannel2 ай бұрын

    • @@pcpairgunschannel congrats, I’ll be looking forwards towards your new builds.

      @Loli.slayer@Loli.slayer2 ай бұрын

  • Good work, well done.. Can you please explain how to make the black receiver with the sizes and locations of the pipe orings? Greetings from Egypt

    @ameenattef469@ameenattef4692 ай бұрын

    • Sorry, the receiver isnt homemade. But In my upcoming videos I'll show the making of a receiver

      @pcpairgunschannel@pcpairgunschannel2 ай бұрын

    • @@pcpairgunschannel I am waiting for the video of the receiver working. Thank you in advance

      @ameenattef469@ameenattef4692 ай бұрын

  • Good video boi 😎👍

    @adityasalunkhe1288@adityasalunkhe12889 ай бұрын

    • You already know

      @pcpairgunschannel@pcpairgunschannel9 ай бұрын

    • @@pcpairgunschannel liar

      @adityasalunkhe1288@adityasalunkhe12889 ай бұрын

  • How can i get that barrel and chamber part?

    @thazuala@thazualaАй бұрын

    • its from gmaccustomparts.com, but its out of stock now

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • the Whole hammer/Trigger assembly can be done with 3d printing..these parts dont need to be aluminum. Too expensive and too much work. The hammer itself needs to be metal obviously. Would have been intersting to see how it does with higher caliber.

    @melangkoh4184@melangkoh41845 ай бұрын

  • Lass dir zu Weinachten eine Felx (Winkelschleifer) Schenken.... Dann kannst du eine Mondfähre bauen.

    @user-wv9fc5bj2l@user-wv9fc5bj2l10 күн бұрын

  • How much is the breech?

    @airsight2753@airsight27538 ай бұрын

    • From what I remember it's 120$ and the breech isn't in production anymore. It's meant for modding the crosman 2240 pistol.

      @pcpairgunschannel@pcpairgunschannel8 ай бұрын

    • @@pcpairgunschannel airgun parts in your area are not cheap.

      @airsight2753@airsight27538 ай бұрын

    • @@airsight2753 yeah sadly :( In my small country there's also practically no air gun production, all imported

      @pcpairgunschannel@pcpairgunschannel8 ай бұрын

  • Very good video, excellent skills and ingenuity, fair play, all the best

    @peterkemp8633@peterkemp86333 ай бұрын

  • Good

    @iqbalchennai6075@iqbalchennai607514 күн бұрын

  • From where you purchased the reciever ? If you selling i can contact you ?

    @humayunali5663@humayunali56633 ай бұрын

    • i cant sell, but its from gmaccustomparts.com

      @pcpairgunschannel@pcpairgunschannel3 ай бұрын

  • GRACIAS GRACIAS GRACIAS

    @rigobertogonzalezaguilera3861@rigobertogonzalezaguilera38616 ай бұрын

  • God tanks👏👏👏👏👏❤️

    @Eng.Rastkhadive@Eng.Rastkhadive6 ай бұрын

  • A Pura set kitne Ka hai

    @sukarbhuiya9513@sukarbhuiya95134 ай бұрын

  • What is the price for cylinder to fit in px100

    @shalomgospelvlog@shalomgospelvlogАй бұрын

    • it wont fit it

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • Super❤

    @Hamara_Ayurved@Hamara_Ayurved2 ай бұрын

  • Gosto ko ung pagkagawa mo napakaka 3:35

    @victorviloria5814@victorviloria58146 ай бұрын

  • Can i get a simple sketch drawing for making your homemade chamber and trigger..

    @zakariamohdsofian9905@zakariamohdsofian99053 ай бұрын

    • sorry, I have no plans of this.

      @pcpairgunschannel@pcpairgunschannel3 ай бұрын

  • Pls where can i buy that upper receiver

    @acejohnjacinto6433@acejohnjacinto643310 күн бұрын

    • gmaccustomparts.com, seems to not be available anymore.

      @pcpairgunschannel@pcpairgunschannel8 күн бұрын

  • Awesome...what is the barrel set sir ??

    @johnericksalonga7652@johnericksalonga76524 ай бұрын

    • crosman 2240 barrel

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

    • @@pcpairgunschannel where I can buy that sir barrel with chamber only I'm from Philippines

      @johnericksalonga7652@johnericksalonga76524 ай бұрын

    • I don't recommend buying this one, this is a very expensive chamber and isn't even in production anymore. In The Philippines, you can find many good barrels and chambers from lazada@@johnericksalonga7652

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

    • @@pcpairgunschannel really ?? What barrel and chamber can buy to lazada

      @johnericksalonga7652@johnericksalonga76524 ай бұрын

    • many unbranded ones, just search pcp chamber and you'll find many.@@johnericksalonga7652

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Please add more power which gives 1250 FPS on 16 Grain .177 Pellets or Slugs

    @Inoinovation@Inoinovation12 күн бұрын

    • with this valve thats not possible. I am currently making a new PCP which will possibly give even 1400 FPS with 16 grain slugs, but that's a very optimistic estimation. The first part is on my channel, making valve and tank

      @pcpairgunschannel@pcpairgunschannel12 күн бұрын

    • @@pcpairgunschannel I watched all of your eight videos. 👍

      @Inoinovation@Inoinovation12 күн бұрын

  • Donde compro el magasin del serrojo?

    @DelwinquinterohotmailcomQuinte@DelwinquinterohotmailcomQuinte7 ай бұрын

  • Thanks for being golden hearth mind frend more power ilove your job i wanted to have that kind of airgun i hope you can shares to me the details where we can buy the parts so that ican start my own toy god bliss you

    @user-dq6qu4ww3n@user-dq6qu4ww3nАй бұрын

    • the links are in description

      @pcpairgunschannel@pcpairgunschannelАй бұрын

  • mgkano pagawa sau ng ganyan

    @bernadasramil6008@bernadasramil60083 ай бұрын

  • Niceee and yes I subscribed 🇳🇱😉👍

    @Relaxbadkneeadventures@Relaxbadkneeadventures9 ай бұрын

    • Thanks for the sub!

      @pcpairgunschannel@pcpairgunschannel9 ай бұрын

  • ไม่ทราบว่าปืนอัดแก๊สนี้ราคาแพงไหมครับ แล้วหาซื้อได้ที่ไหนบ้างครับ

    @user-cr5uw3wk7k@user-cr5uw3wk7k6 ай бұрын

  • what is the name of mgazine holder? thnks

    @markbelen2239@markbelen22394 ай бұрын

    • .177 Marauder Magazine

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Very impressive to build this without precision machinery (lathe/milling machine etc.). However, I'm a little confused as to the object of building this. How did you come to have all the complex parts are already (valve and breech), especially the breech? Why not just buy a complete gun? If this was just a case of 'I have some parts, let's make the rest of the gun', or, 'just because I can' then I understand. Enlighten me as to why you did this project?

    @deaniweenie@deaniweenie4 ай бұрын

    • It was for a more customized build and to get more experience building stuff as I am not that experienced yet. I am getting more machinery now and will probably make pretty much all the parts myself in my upcoming videos

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

    • @@pcpairgunschannel Well, I'll definitely tune in to see that. Seeing what you can do with just hand tools I think with machines your work will be truly awesome

      @deaniweenie@deaniweenie4 ай бұрын

  • Bro puydi mkabili nyan yong homemade air gun mo magkano bro

    @kenpautan4617@kenpautan46173 ай бұрын

  • Where did yoi get the barrel?

    @dadz6364@dadz63645 ай бұрын

    • gmaccustomparts.com

      @pcpairgunschannel@pcpairgunschannel5 ай бұрын

  • 👍👍👍💯

    @julsvlogtv1991@julsvlogtv19916 ай бұрын

  • hi friend new subscriber MALAUEG TRIBES AND FISHING TV nice sharing friend.

    @malauegtribesandfishingftv@malauegtribesandfishingftv8 ай бұрын

    • thanks 👍🙏

      @pcpairgunschannel@pcpairgunschannel8 ай бұрын

  • That's man is talented I se is pilipino boy

    @serapiondelatorre5213@serapiondelatorre52133 ай бұрын

  • Bro this product how much I want take it bro

    @ghostkiller5463@ghostkiller54632 ай бұрын

    • I cant sell it, sorry

      @pcpairgunschannel@pcpairgunschannel2 ай бұрын

  • Nonton mas 🙏 hadir

    @sniperby@sniperbyАй бұрын

  • I want to buy 1 very much from many years so how do i buy...humble request Please

    @imnatongpang9513@imnatongpang95136 ай бұрын

    • Sorry... I can't ship it legally

      @pcpairgunschannel@pcpairgunschannel6 ай бұрын

  • I want by this..do you have to sale?

    @jackjane7265@jackjane72654 ай бұрын

    • can't sell

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • A poora set kitne ka aata hai ret bataye

    @sukarbhuiya9513@sukarbhuiya95134 ай бұрын

    • cant sell

      @pcpairgunschannel@pcpairgunschannel4 ай бұрын

  • Is it gonna shoot through tissue paper?

    @nicholaspiscitelli7685@nicholaspiscitelli76856 ай бұрын

    • How many sheets

      @pcpairgunschannel@pcpairgunschannel6 ай бұрын

  • Terbaik

    @MusaFwenando-oi1pc@MusaFwenando-oi1pc6 ай бұрын

  • Hi, would you mind to build a complete gun and send it to me please!

    @surajitgci@surajitgci7 ай бұрын

    • Sorry, it's illegal for me to send it

      @pcpairgunschannel@pcpairgunschannel7 ай бұрын

    • @@pcpairgunschannel Good call.

      @DB-yj3qc@DB-yj3qc6 ай бұрын

  • Magkano Kung mag pagawa Ako sayo idol.

    @erwineramis5189@erwineramis51892 ай бұрын

  • 👍👍👍👍

    @Entertainmentbysanju@Entertainmentbysanju5 ай бұрын
KZhead