How to install the BB-1000 Supreme Bidet Seat by Bio Bidet

Need help installing your new Bio Bidet BB-1000 Supreme Bidet seat? Your bidet expert, and Many Bidets Owner, Daniel Johnson shows you step by step how to install the BB-1000 bidet seat by Bio Bidet.
Bio Bidet BB-1000: www.manybidets.com/product/bb...
Confused and need help picking a bidet? Get our ebook!
www.manybidets.com/how-to-pic...
Visit our site: www.manybidets.com/?...
Need help deciding? Check out our quiz: www.manybidets.com/blog/bidet...
We hope this will help!
Don't forget to Subscribe for the latest reviews, compares, and giveaways: goo.gl/gpJu2d
Useful Links & Info:
Phone: (Call or Text): 248-974-4030
Email: support@manybidets.com
In-depth compares: www.manybidets.com/blog/?sort...
Testimonials: www.manybidets.com/reviews-an...
Learn about us: www.manybidets.com/about/?utm...
Transcript:
If you're excited to get the BB-1000, by Bio Bidet, but are concerned about how complicated it will be to install, stay tuned, this video will make the process simple. My name is Daniel Johnson, I'm your bidet expert and I'm the owner of manybidets.com, where over the past eight years we've sold over 10,000 bidets.
Now, before we install the Bio Bidet BB-1000 you might be asking yourself “Is the BB-1000 the bidet seat for me?”. If that's a question you're asking, check out our ultimate buyer's guide E-book, a link is in the video description. It will give you everything you could possibly want to know about bidets and help you make the perfect choice.
Now, let's jump into the install. We're going to start by turning off the water supply. Mine is a quarter turn, but yours might be required to be turned further, just turn it off until it stops twisting. Now that we've done that, if we undo this we're going to have some water coming through, so let's start by draining the tank. We're going to hold down on this flush lever until the tank's as empty as possible. We can hear water stopped running, so we're going to let up on that lever and now unscrew the line that's at the bottom of the tank. We have something down here to catch any water that drips, but we shouldn't have a lot, because we've turned off the water and we've drained the tank. All right, so we've got a little bit of water, we're letting that drip out.
Now, we need to install the T-connector. We want to make sure that this T-connector, which comes with your purchase from us, has a rubber O-ring in the top of the T, and we'll just attach it here. You don't need plumber's tape for this, in fact we recommend trying it first without plumber's tape. This just needs to be hand tightened. Make sure that you didn't lose the rubber ring on the water inlet and attach that as well. It's also important to note that the BB-1000 comes with an additional water supply hose; Don't let that confuse you, you can use the existing water supply hose. The hose that comes with the BB-1000 for the water supply, can just be ignored, so don't let that throw you for a loop. You will need to use the water supply hose that leads from the T to the bidet seat, however, so we're going to go ahead and install that now. Make sure that the rubber gasket is on that as well and connect it to the T-connector. The hose that you will be utilizing, from the Bio Bidet box, is the white hose. Now that we've got it hand tight, we're going to go ahead and give it a little additional crank with a wrench, but again we want to make sure that we're not over tightening either.
Unlike a traditional toilet seat, where you mount the entire toilet seat on the toilet in one go, a bidet seat utilizes a mounting plate. We'll want to install the mounting plate first. The nub that we see here, needs to be facing the rear and the arrows need to be pointing at the toilet tank. If we try installing this mounting plate this direction, we have it on backwards. We want to make sure it's facing the proper direction. Now, we can mount it to the toilet. To do that, we are going to use these washers. The washers are going to sit in grooves, in the mounting plate. The ridge that we see here does need to be facing up, because that's going to grip the top of the bolt heads. There's little grooves on the bottom sides that allow it to grip the mounting plate. Grooves up, and then the bolt goes through those washers....
00:00 Introduction
00:28 Beginning Note
00:50 Step #1 Drain Tank
01:45 Step #2 Install T-Connector
03:08 Step #3 Install Mounting Plate
05:16 Step #4 Install Seat
06:29 Step #5 Connect Water Supply
07:52 Step #6 Plug into Power and Test
10:38 Closing Statement