Process of Making 50,000 Liter Super Large Oil Tank. Bulk Tank Manufacturing Factory
2024 ж. 19 Қаң.
974 539 Рет қаралды
👀 Product in Video : www.mstank.co.kr
__
📧 Contact : allprocessofworld@gmail.com
🎁 Join Channel Membership : bit.ly/3NBrf2Y
🎥 Copyright(C) 2020. #allprocessofworld #세상의모든과정. all rights reserved.
*"Wait! Subscribe to our channel, turn on subtitles (CC) and watch the video!☝"* 👀 Product in Video (영상 속 유류탱크) : 'MST' - www.mstank.co.kr 대표전화 : 043-877-6643 주소 : 충청북도 음성군 금왕읍 금일로 247-16 E-mail : pm02@mstank.co.kr __ 📧 Contact (채널 문의) : allprocessofworld@gmail.com 🎁 Join Channel Membership (채널 멤버십) : bit.ly/3NBrf2Y
4BS€N M☆$ HADiR ❤KZheadMantap Eiy 🎉🎉🎉🎉🎉🎉🎉 S€MOGA $UK$E$ URUSAN LANCAR SEMUANYA .
Die Musik macht das Video unerträglich. Wer Musik will, wird Musik finden, ohne sie von dir aufgedrängt zu bekommen
your subtitles are wrong. None of this is made from copper for starters.
밴딩,용접기술 대단합니다❤❤❤
최선을 다하시는 분들의 모습이 보기 좋고 또한 훌륭하십니다.😊
Хорошо и слаженно работает эта команда профессионалов. Работа очень качественная. Приятно наблюдать .👌👍🔥
시설이 정말 좋네요 대부분 자동화라인을 쓰고 있어서 일도 많이 편해 보입니다
Man, I miss sandblasting those giant tanks. Was such a great job.
신기하고 재미있었습니다.
14:20 - actually, you don't "dry" resin, it doesn't dry, it stets hard by chemical reaction. Yes, it's "wet" when applied, and yes, it's "dry" when fully cured (set) but this is not "drying". The heat is needed to speed up the reaction during cold weather (the speed of chemical reaction depends on temperature).
Thanks for your videos. One small suggestion: Could you please keep the closed captions on screen for longer time? It stresses me, that I have to read fast to get it all. I mean, there is no reason to make them short lived.
Works fine as it is for me.
Yes caption moves so fast.
Read faster
اتقان في التصنيع 😊😊
시설 좋은 회사이네요~
Thank You For This Amazing Process Episode I like it✨🥂
멋있어요
Спасибо за видео! Было очень интересно!
매우 정교한 도구를 사용하여 매우 특별한 탱크, 최고의 작업을 만드는 비디오를 보게 되어 매우 기쁩니다,,,👍
Trabalho bonito de se ver 👍👏
Fantastic work!!
와... 철제위에 FRP 마감까지 올라가는줄은 몰랐네요... 대단합니다 진짜....
고맙습니다
great job, and great vid!!!
일이 재밋어 보입니다. 프라모델 만드는거 같음ㅋㅋ
ASTM A36 중국산을 사용하는군요? 열교환기 제작공정도 궁금합니다.^^♡
13:44 peak painting has been achieved
석유탱크는 하이드로 테스트랑 용접부 Radiography 는 안하는건가요?
12:43 이땐 어떤작업인가요?
Its nice to watch something being built with proper welds, utilizing modern equipment; not in some 3rd world country.
Some were not wearing tinted lens, like the first guy with plasma welding. How?
Time and time again I hear that Koreans are the best welders in the world today. Watching these videos illustrates how that could be true.
I thought this was a Chinese factory. :(
12:40 저기 뿌리는 재료가 뭐죠? 저걸 뿌려서 도포하면 어떤 효과가 있을까요?
- I am speechless. 😶👍🏻
ESPECTACULAR!!!!
Petroleum tank lining 관련해서 일하면서 오일탱크에 man way 뚤고 직접들어가서 일했던 기억나네요 ㅎㅎ
Tank was not shown as lined (internal). Fibreglass external coating.
제조업은 정말 위대하네요.. 보기만해도 그 공수, 고생이 느껴질 정도입니다..
This channel is very interesting beautiful and Amazing video nice
맨홀 만들고 왼쪽 원형은 안에서 용접 어떻게 하나요.?
신기하게도 저작은구멍에 사람이들어갈수있음
Several subtitles mention copper, but it looks like steel in the video. Is there copper involved in this process?
I don't think so,. All I see is steel.
the editing done by people who don't know any better
The only place there would be copper on these tanks are in the brass valve hardware.
4:30초 저 직선 용접기 참 반듯하네요. 저런 용접기 이름이 뭐에요?별도의 가스 들어가는지요? 어떤 가스 들어가용? 용접하면서 돌가루는 왜 배출 하나요? 이유가 뭐에요?
서브머지드 아크 용접입니다.
리얼 대단하다.... 이야
I like your video 😍😍❤❤❤
Beautiful fabricated and weleded
I like ‘tis channel ❤
Very cool.
Question" The tank end piece was welded from the inside with the employee next to the machine. When they weld the other end, how does the employee get out of the tank if he is inside?
момент сварки в закрытой цистерне предусмотрительно не показан 😅😅 а так , норм, вполне годно, особенно внешнее покрытие. риспект
Eine hervorragende Übersetzung, ich wünschte, mein Google Translator würde auch so gut sein! Sehr gut, die Untertitel
Welds don't come much more beautiful than those. Great skill!
진짜 신기하네 이렇게 만드는구나 ㅋㅋㅋ
편집하실 때 용접 장면에는 눈뽕방지를 추가해 주시면 안될까요? 제작 과정이 궁금한데 눈아파서 보다가 말았습니다.
Sehr interessant zu sehen! ABER: Ich hätte gerne noch die Arbeiten im inneren gesehen. Was wird dort als Rostschutz gemacht?
초거대 사이즈👍
와우 완성품 한개에 얼마인가요? 그나저나 일하시는 분들 건강 엄청 안좋아질듯..
최소 몇천만원 하지싶네요. 그러게요 페인트랑 레진이랑 흄가스랑 장난 아닙니다. 환기시설이랑 용접시 산소탱크를 매고들어가거나 시로코 배기 자바라 끌고들어가서 빨아내야할듯 합니다.
❤ super
EXCELENTE
Super ! ❤👍🌟🌟🌟🌟🌟🙏🌹💐🌹💐🌹😊
This one was so relaxing to watch.
And the riveting music building in the background
@@mlb6d9 They have music for every activity, even riveting. 😀
Very cool to watch. Wonder what one if these costs
For the giant round ends: My dream plasma cutter!- I want one of these huge things for my garage! My dream- a garage with tools for fabricating better tools for fabricating better tools- for eventually fabricating better things more efficiently- I need a personal warehouse....
중국산 강판 쓸만한가?
내부 페이팅은 안하나요?
석유가 담기니 페인트가 녹을듯요
В этом видео прекрасно всё.
where will this gets installed since it only has 1 wall + fiberglass resin?
Why not sand blasting the material before lining to enhance coating
Exelente y cuánto cuesta un tanque?
What is the thickness of the tanker sheet.
Muito grande tanque
Wow
Supper
Здравия . В 1993 году , тоже , выполнял аналогичную работу . Только , сварка , была , ручная дуговая и не было таких условий , как у них . И без стекловолокна .
Я думал у нас в Н.Новгороде технология производства не очень) Оказалось, что вполне конкурентноспособная ) У нас получше оборудование и качество производства подобных цистерн )
Сними ролик мы посмотрим
Что, у вас производят в небольшом цеху? Это частное небольшое производство. У вас развит малый и средний бизнес?
@@nikolayim8127 полный цикл производства от самого начала до готовой продукции.(не государственное предприятие) Например, производим газовозы. (Уходят уже установленные на свое шасси) А так самые крупные емкости делали для немцев, из стали толщиной 20мм, обечайки катались диаметром 2,4 метра. Очень большие. Продольный шов тут показали, как сваривают жуком. Не очень. У нас сварка производилась на продольной колонне. Намного качественнее. (В видео была подобная только кольцевая сварка) Ну и готовая такая "бочка" весила около 10тонн ) погрузчиком не поднять. Ну маленькие тоже делали. А вообще я конечно пару лет как там не работаю. Просто что видел с тем и сравнил )
@@SorryThisIsMyLife не работаю там пару лет.
Maravilha
как обычная труба)
지름이얼마나될까요 6:59
저곳 사용된 용접기 이름 좀 가르쳐 주세요
주유소 지하 저장탱크 인가 ~~????
Все надо спасибо
와~
I was waiting for the guy at the end to slap the tank like a drum.
I never knew "Pies" were a unit of measurement ! 😆
It takes four guys to put the ink on that giant ink roller
La placa será de un cuarto de pulgada o de que grueso es
FRPはめっちゃ痒くなるんだよな😂
What was the worker doing at 11:21 with the white spray paint, solvent and that U-shaped tool?
Checking for cracks in the welds. Look up Magnetic Particle Inspection - magnaflux is a common brand.
I did not expect the carbon fiber reinforcement. That was nice.
I think you may mean fiber glass, they're similar in a lot of ways, especially the application- these were wrapped in fiber glass though, not carbon fiber- I get them mixed up sometimes myself. I didn't know that about these either, I always thought they were just giant metal barrels, I never realized they wrapped them- I think it may have something to do with insulation, which fiber glass is good for- that's why it's in a lot of wall insulation in residential Homes all around the US.
А зачем покрывают стекловолокном? Так лучше антикоррозионные свойства чем просто краской?
What size
11分32秒處MT磁力檢測、噴劑似乎不是螢光磁粉-不知是何種溶劑?請問有人解答嗎?
3:04 : world's largest pizza pan
Joor Mfg. Plasteel 1976 pioneers in this technology.
Tôi muốn đănh ký làm với
That's the laziest and most efficient way to fiberglass I've seen to date.
Are you looking for efficiency or are you looking for hard work? I see it from the smartest ways in efficiency and quality.
They even did not surface treatment before lining
@@OmaarQhu hu😊
I was expecting to see pole holders...the mechanical type, and was a little surprised to see three guys holding the rollers. I'm all for efficiency, quality, and ease of work. I have almost 30 years doing multiple trades and my body is paying for it. My hobby and work is to do things more efficiently. I built a couple automated machines to take the hard work out of my other hobby.
That is how some modern GRP boat hulls are laid up these days.
NOW THAT IS A PIE PAN
You showed the whole process in the first 30 seconds
1:37 중국 철판은 단가가 싸지만 신뢰하기 어렵다.
저거 칠할때 왜케 불안하지 순간 저거 끊어져서 떨어져서 굴르면 뭐 방어막 하나가없네 ㄷㄷ;
POUR LE RESSUAGE ON MET EN PREMIER LA COULEUR ROUGE ENSUITE LE REVELATEUR BLANC
Tutto li? Alla Ubertone di Mortara ne fabbricavano di dinensioni 20 volte superiori.....
Nicely Done. Magnetic Particle testing of all welded joints. Fibreglass Coating and Air Test. Almost 11,000 Imperial Gallons.
기름탱크니. RT. 찍어야한다. 자동용접 때리면. 괜찮다
Заачеем бочку пластмассой намазали?
Потому что какашек не было
Делали один бак, а получился другой :-)
Там в субтитрах вообще про медь, хотя это мало похоже на медь как по мне.
So is it steel or is it copper?
steel