I finally had a chance to pull the best clips from all of the different camera angles from the first test run of the Warlock Project. This project far exceeded my wildest expectation. What A Rush as you can see from the expressions on our face.
I finally had a chance to pull the best clips from all of the different camera angles from the first test run of the Warlock Project. This project far exceeded my wildest expectation. What A Rush as you can see from the expressions on our face.
Rule #1 !! NO HATS !!! NO LOOSE CLOTHING !!!! Ruin your day real fast ... I thought that hat was going right into that turbine !!! 😱😰nice snag !!
Make for one day of far up to wayyyyyyyyyy down real fast
When you get turbine boat money....you laugh and you enjoy every damn minute of it.
Hey Fred, let’s tell the wives we’re going fishing next weekend again. And when they ask where the catch is, we’ll just say the water was to choppy again.
Be nice to see a shot filmed from land to appreciate the speed. Great vid and great boat!
Here is one taken from a drone. facebook.com/5258281/videos/10111816449691943/
OMG Too Much Fun!! What an awesome boat...Good job man!
Literally smiles per miles after each pull. That thing rips!
Fascinating to see a single arneson drive on a potato chip this size. Driver is quite talented.
Wow what a beast of a machine, I bet that thing is so much fun to ride
And yep I'd be laughing too, just like Maverick said, I feel the need. . . and everyone knows the rest 🤣
When I hit that 1.9 Billion tonight I'm getting one too!!
Guys this was just so awesome to see and it's absolutely made my day seeing the enjoyment of you both 😊 hahahaha just a beast of a boat and god the driveline in that boat is the cream puff of them all , so neat and tidy 🎉
Man Looks like a Kid at a Toy store Just having the time of his life :) Great video Guys Awesome Boat Love the sounds ...
Epic rig man!!
Turbines have great power to weight ratio, just that 200 gph fuel consumption that gets you..Awesome machine! Thanks for the ride.
My max fuel consumption is only 120 gph but you cant do that kind of power for only a few seconds. Average consumption is about 60 gph.
Not bad, thank you for the info! Enjoy sir.
Offset by the fact that power out of a piston engine, the turbine will last 5 times that of the length of time in engine longevity
@@gcmsinc 2 gal per minute is ONLY?
How fast wll that boat go 130+ ? Very nice boat
Awesome 👌
Awesome 😎
Great boat. Thanks
Hell of a ride
Awesome build sir. Sure gets on plane nicely! Now strap down all your loose items haha.
As much as I think a turbine powered boat is frigging awesome... I dont think I'd enjoy having to listen to that high pitch whistle for very long.
The noise does get old but is offset by the thrill of the power.
I take it you're not married?
If it sounds anything like the aircrafts the engine would have came from, it shouldn’t sound as high pitched as the video makes it out to be. Loud as hell though but the smell of burning jet fuel and the start ups must make it all worth the while
The high pitch whine definitely bothered me...I could not listen to it at normal volume never mind being right next to it in the boat...at least gun range ear muffs for me
Had me at polished prop
I wonder if people know that they can get a muffler for the turbine to get rid of the high pitch noise. And it's not that big.
cant believe they aren't wearing hearing protection.
Off and on, off and on the throttle, why isnt the engine run on full? Is it running bad on full, inbalanced (turbine engine needs to have perfect balance) or not enough fuel to run true?
What a buzz luv it. What's its top speed and how fast from 0 to 60mph
1300hp, 1150 ftlb's of torque. 0-100 mph in 10 seconds, 40-100 in 4 seconds. My top speed has been 134 mph @ 52% torque load. The prop will run out of speed around 150 mph with a 26" prop.
Silly question. If it's turbine power, is the prop always used. Turbines operate on thrust, not a physical output. Correct?? I'm missing the transition from thrust to prop, I think???
@@jeffallen7923 This is a turboshaft engine. Similar to a jet but the power takeoff is not used to power a fan like a modern jet but instead a shaft which was originally coupled to a helicopter rotor, airplane propellor, electric generator or other low speed use like this boat propeller.
That 53 ingesting that hat at high power would have been spectacular and expensive footage
Thats what the FOD screen is for.
Love it😘
What a mad machine! What kind of turbine is that?
T53-L13 Lycoming Out of a Huey Helicopter.
No rod holders for the fishing poles.. except for the large one in the back
This boat have 2 motors? How the propreler is activated? Awesome boat!!! Omg!
The prop is driven by the power turbine.
Need a chase boat camera for a better visual reference on the speed.
More like a helicopter
From the looks on your faces no one is going to ski behind this boat.
they do all the time in New Zealand. Watch the videos. Saw two of them at same time with 280 ft ropes skiing at 135mpg next to each other for miles. Incredible
Every thought about dropping a trolling motor over the side for in port maneuvering?
@Rusty Climber Save you from pulling it up. Could get expensive.
No...just no.
Great boat but can't see how she travels with the camera lens pointed at their grining faces😡
What are all those belt drive accessories in the front of the turbine
Power steering pump and alternator.
Belt drive accessories.... Climate Control pump (just incase 200mph wind isn't cold enough) , Massage Seat heat pump (to ease the "Pucker Factor at 250mph), and Oxygen Generator for operations at or above Mach 2 !!! 😄😁😎
Hydraulic pump for the arneson steering and trimming and possibly alternator though most turbines have then running off the pto shaft
Wow.... which waterjet unit and which stepdown gearbox please ?
Custom built gearbox by SCS gears. No water Jet. Arneson ASD-8 surface drive. kzhead.info?event=comments&redir_token=QUFFLUhqa3JLb1k1QzN6VkdBeWhwdThmNDBnX2o5MkZEZ3xBQ3Jtc0ttZmxIdjl3RW1OLVhDVmhQVER1Zzh4dl9Ubkp6MDZhOEZlZ2FqTHREM0J0eE1yUjlaSTI1TXZkZmpEQVBNaVlJVXF4NWk0QWIzVzJJc1hqM3diSzdjTHV3X21aX093RkNicEZwZ0lZNDVvRk5LU1U3Zw&q=https%3A%2F%2Fwww.screamandfly.com%2Fshowthread.php%3F330722-Turbine-Warlock-Project%26highlight%3DTurbine%2BWarlock%2BProject&stzid=UgxoYMW_5DTKr9eiOUN4AaABAg
Does it run on K-1 kero or do you have to go to the airport to buy jet fuel?
I have a good resource for Jet-A
I would love to see the build pics
You can find them here www.screamandfly.com/showthread.php?330722-Turbine-Warlock-Project&highlight=Turbine+Warlock+Project
No seatbelts or harnesses?
Scared to open her up!
No seat belts?
Seems like good enough.
Mind blowing thing being, this guy was basically idling at 50knts from the sound/look of it... the little blips of power he’d give it came no where even close to spooling this thing up to its true capabilities...So scary, I wonder if he’s ever just buried the throttle for a few seconds?! 🤔😳😬😬😬😬😬😛!!!!!!!
No longer than 6 seconds. Reached 134 mph in 6 seconds from 40 mph. Backed the throttle off to sustain 134 for 5 miles at 52% torque load.
OMFG!!!! 😬 straight savagery! My hats off to you sir! 🙂🤙
Although I hate boats after working on them for 45 plus years!
what about a fod guard i thought that hat was going in the front of the turbine, and a fire extinguisher!
Look closer. There is a FOD Screen
it's the Bugatti Chiron of the water..!!
Then a Tesla boat zips pass, at half volume, using a 12v lithium battery. lol.
@@babbalonian2 No.
What was the original set up?
Mercury 500 HP with a Bravo Drive. Top speed was 70 mph.
Wow! Looked like you almost had a "Hot Start".
Where do you gather that thought from, the flames coming out of the exhaust pipe? If so that's intentional for show. Raw fuel dumped into the pipe and lit with streak fuel. "After Burner" for the lack of a better word. Show only.
@@gcmsinc Understand. Functionality over show is good with Turbines. But hey, what do I know. Sweet boat by the way. Just thought you might be careful with a very expensive piece of complex machinery. That's all. .
@@pilot3016 Yep, She's a good turbine. Never had a hot start on this one. She hits about 1150 F' max on startup. The key is to have good hot batteries to get it spooled up quick.
@@gcmsinc excellent!
holy cavitation
I just went from six to midnight….hahah freaking dope. What was the top speed?
136 mph is the top speed with a 26" pitch prop.
Nice!!!!(Mommy... can I have one for Christmas?!)
Hold on to that phone dude
That's no boat that's a fighter jet
What a cool project. I would think I could build this setup for about $50k plus my time. I just finished restoring a 1200hp twin stroker 28’ magnum deep v for $30k that’s got x2 new small blocks and this project looks easier at the end of the day imo.
Arneson drives. Nice
Top speed ?
1300hp, 1150 ftlb's of torque. 0-100 mph in 10 seconds, 40-100 in 4 seconds. My top speed has been 134 mph @ 52% torque load. The prop will run out of speed around 150 mph with a 26" prop.
@@gcmsinc good lord. Engine aint even working hard yet
1000+ HP on a 25ft tunnel hull with a surface drive?? Where will you be able to full-throttle that? Like, nowhere?? What a weapon..
I have had it at full throttle several times but no longer than 5 seconds or so. Top speed achieved has been 134 constant for about 5 miles at 52% load on the engine . The prop will theoretically run out of speed at around 148 mph. It's all about the acceleration. 0-100 in 10 seconds. 40-100 in 4 seconds. 25' 5000 pound dragster.
@@gcmsinc Yeah full marks, thats inpressive. It'd be easy to come unstuck in that for sure, I bet no one but you drives it lol. I think a full-on raceboat wouldn't have that power-tow-weight ratio...
@@SteveWrightNZ you are correct. I am the only one that has ever driven it and there are only a handful of people I would trust to drive it who are very familure with driving a turbine powered boat.
im sure you probably test ed before, i where you will use some security gear helmet and body harness and and secure yourself in the seat
You never want to be secured to the seat in a open boat. Only a capsule boat with oxygen.
Strapping yourself into a boat? C’mon now...that’s not too bright 🤦♂️
Full Build Description and Pic's can be seen here, www.screamandfly.com/showthread.php?330722-Turbine-Warlock-Project&highlight=Turbine+Warlock+Project
At those speeds, I wouldn't rely on one clip to hold my life vest on. I'd use both clips and the zipper. Of course if you crash at those speeds, your life vest will do nothing more than keep your dead body from sinking.
They make vests with drag chutes. They deploy when you get launched, slowing your arrival to the cold hard blue
@@zuestoots5176 Probably should be zipped up with the clips done if you are using one of those too. That sounds like a rough way to exit a boat!
It's like the $1,400 carbon fiber motorcycle helmet I had...it's not for me...it was my open casket for ma helmet, I called it.
Your neck would break at those speeds and you would float dead.
Build a huge rooster tail and push it way back! Power and speed
You need to be wearing ear pieces the high pitch will blow out your ears!
You can hardly see them but they are in our ears.
Is that enough? I was thinking of ear coverings like you'd use at the gun range.
@@johnmichaelsaraceno7339 These work just as well when used properly. They are a bit of a pain to get out with fat fingers but they don't blow off at 100 mph like over the ears do.
I was actually thinking the same thing about your hair but it looks like I’m too late.
應該行到140海里
Cool video advice ditch the head cam.
👍👍👍👍👍👍👍🙏🏼👍👍🤗
What’s top speed?
so far 134 mph @ 52% power
@@gcmsinc Holy shit!
если вместо винта приделать пропейлер, то она полетит!
6:13 hope that wasn't important
It was a paper towel
速度太快了難怪頭髮會被風吹掉😅🤣🤣
應該行到140海里
Looks like a giant pain in the ass money pit... but a hella cool pain in the ass money pit!
Actually just the opposite. Over 4000 miles of high speed running and no service work to do on the engine. 2500 hours of operation before the first inspection. Not even a oil change required. Just wash the compressor every 50 hrs of operation in a fresh water environment or after every run in salt water. Very simple procedure like flushing you piston engine on a boat.
Aren't all boats money pits?
@@gcmsinc Wow that is pretty incredible and not that surprising seeing as any turbine engine is gonna be designed to run forever. Amazing machine!
Daddy, my hat blew off....
Hahahaha, priceless line👌
That hat would have been the end of that engine had he not grabbed it
No, It would have never made it through the FOD screen.
Noisy boat.
Это типо водяной UH-1))))
At 6:13 the sunglasses went overboard 🤣
Fortunatly it wasn't sunglasses. It was a paper towel.
Just add wings.
Hi Robert, nice fun boat, looks like an awesome build. If you sell this boat once please contact me. Thanks, Joe
Everything is for sale or I can build you one.
@@gcmsinc what costs are we talking about?
@@petergebert4817 call me at 850-258-4423
I bet this gets great fuel economy!
the fuel consumption is measured in smile's per gallon and you get allot .
@@jeffbower100 Perfect 👌🏽
Nice troll.
@@Icutmetal no i don't think he troles much with the turbine , maybe he has a little flip down for troleing.
@@jeffbower100 Either you’re remedial, or your sarcasm game is extra strong.
My 20ft hydrostream with an outboard looks like it’s faster and it’s 250,000 $ cheaper
LOL, Thats funny! I don't have no where near 250k in this entire build.
Lol your hydrostream does 100+ yeah...
Yes Sir and my buddy has a ranger bass boat that runs 90 that’s stock ready to fish
@@patrickrolf482 I here big internet numbers for speed until it comes to showing it on the water and for some reason posted numbers like 100+ seem to really be 70+ when the prop hits the water. I take this boat all over the country to run in speed events and fun run's. Your welcome to jump in and take a ride and I'll show you what it feels like to go from 40 mph to 130 mph in 6 seconds. Anytime, every time!