Watch CSMA art faculty member Deanna Rae sculpt a horse using Super Sculpey.
Пікірлер
I’m looking forward to trying plastilina sculptures on a similar wire over wood install and your method of drilling holes for the leg wires is the simplest, easiest method I’ve seen, so thank you for sharing!
@CreativeKristenTaylorАй бұрын
So beautiful!
@lizielim_miniatures6 жыл бұрын
Step one: sketch the horse Step two: sculpt the rest of the horse Step three: finish up with details :) Beautiful sculpture, not much as a tutorial though.
@zoogrrl53094 жыл бұрын
I find sketching difficult because I’m not a good drawer. But 3D comes naturally. I wish I could sketch ❤
@elegantlywasted5447 Жыл бұрын
IF your just starting out {and honestly even IF your not} use foil to bulk out the armature, it will heat up and help bake the clay through and save you a fortune of clay and problems trying to cure very thick clay
@RonWylie-gk5lc4 жыл бұрын
I totally agree
@SephirothWaifu3 жыл бұрын
Wonderful work!
@artsculpture10243 жыл бұрын
TOO BEAUTIFUL, EXCELLENT.
@thaiquanghien.36695 жыл бұрын
🌹✨💞🙏🌌 Starseedkacademiezeichensain
@nicolemeeh29753 ай бұрын
LOVE that horse 😍 great sculpt 😊👌
@lea19895 жыл бұрын
Hello I'm just now finding your video.. I really like your approach to making the armature! I plan on making a horse here soon as well. I hope it turns out at least half as nice as yours! Do you sculpt in solid clay?! You could hollow out your sculpture with foil? It saves clay and reduces the baking time.
@TheBroodingTom5 жыл бұрын
Thank you so very much for sharing your wonderful talent!💕🙏🏼✨💫🌟 You inspired me and taught me! I just subscribed, I am hoping to learn more!🙏🏼💕💖🌟💫✨ I love the music too!💖 G,
@gilbertlozano9024 жыл бұрын
AMAZING!!!!!!!!!!!!
@RacheLD24005 жыл бұрын
You missed showing us a few hundred steps... AND, why did you not "bulk" the horses main body with aluminum foil or something, to prevent using/wasting expensive Sculpey?
@usernamemykel3 жыл бұрын
Is there a reason you don't use foil to bulk it out?
@tamerathomas68434 жыл бұрын
No answer, no reason, not a good instructor - left out a few hundred steps.
@usernamemykel3 жыл бұрын
What aluminum wire are you using and how did you cut it? I bought solid 4awg aluminum wire and I cannot cut it with diagonal cutting pliers (7”) :(
@odethsalomonbernedo79883 жыл бұрын
what material do you use ?
@leonalisandro6314 жыл бұрын
Wow ,Maybe a daft question but do you remove the sculpture from the base before baking?
@thinktankboulevard Жыл бұрын
when you get to baking it .do you leave it on the wood or ???
@chentesafao5 жыл бұрын
I leave it on the wood because it bakes at 250°F, this tutorial isn't very good I will link a couple much better ones
@sunnymoney72045 жыл бұрын
kzhead.info/sun/lrCJppyZb4unp3A/bejne.html this goes way more in depth with adding detail to the clay
@sunnymoney72045 жыл бұрын
And this kzhead.info/sun/hrOwobycm5l7f58/bejne.html shows the sculpting and baking process
@sunnymoney72045 жыл бұрын
does the aluminum wire stay in the sculpture when firing? Or is the wire and the wood removed before it goes into the kiln?
@user-er9ts6ut1z5 ай бұрын
For those complaining about how she missed a gazillion steps... please remember, this is a teaser to get you to go take their classes. They didn't say that, but why else would it give you a website at the end. So you can go take the course. Aka this is marketing.
@catralynxeytigress17142 жыл бұрын
For those of you who use polymer clay. How in the world are you baking it while on the wood??? Wouldn't it burn the wood?
@catralynxeytigress17142 жыл бұрын
No it doesn't burn. Most polymer clay only needs to be baked at 275 degrees Fahrenheit for about 30 mins. Thre only problem ive found is that sometimes there wood might warp or bow
@TheDarkArtist662 жыл бұрын
Where’s the rest of the videos??
@elegantlywasted5447 Жыл бұрын
Lovely, thanks for your video. I do unicorns , quite hard. Use air dry clay. You have to work fast, otherwise it dries and cracks.
@sculpturesbyC.D.4 жыл бұрын
You can use water with that?
@harisikram7263 жыл бұрын
i love you horse
@ximemonroy7554 жыл бұрын
😘🤩😍🥰😍🤩😘
@yaraahmed2215Күн бұрын
Maybe she isn't going to bake it at all, hence none of the tricks like using foil? Maybe their school has a ton of sculpey stocked up for students to use?
@HO-bndk8 күн бұрын
I'm surprised you aren't bulking with foil first.
@j453 Жыл бұрын
One day I'm gonna make a bunch of them and sell some
I’m looking forward to trying plastilina sculptures on a similar wire over wood install and your method of drilling holes for the leg wires is the simplest, easiest method I’ve seen, so thank you for sharing!
So beautiful!
Step one: sketch the horse Step two: sculpt the rest of the horse Step three: finish up with details :) Beautiful sculpture, not much as a tutorial though.
I find sketching difficult because I’m not a good drawer. But 3D comes naturally. I wish I could sketch ❤
IF your just starting out {and honestly even IF your not} use foil to bulk out the armature, it will heat up and help bake the clay through and save you a fortune of clay and problems trying to cure very thick clay
I totally agree
Wonderful work!
TOO BEAUTIFUL, EXCELLENT.
🌹✨💞🙏🌌 Starseedkacademiezeichensain
LOVE that horse 😍 great sculpt 😊👌
Hello I'm just now finding your video.. I really like your approach to making the armature! I plan on making a horse here soon as well. I hope it turns out at least half as nice as yours! Do you sculpt in solid clay?! You could hollow out your sculpture with foil? It saves clay and reduces the baking time.
Thank you so very much for sharing your wonderful talent!💕🙏🏼✨💫🌟 You inspired me and taught me! I just subscribed, I am hoping to learn more!🙏🏼💕💖🌟💫✨ I love the music too!💖 G,
AMAZING!!!!!!!!!!!!
You missed showing us a few hundred steps... AND, why did you not "bulk" the horses main body with aluminum foil or something, to prevent using/wasting expensive Sculpey?
Is there a reason you don't use foil to bulk it out?
No answer, no reason, not a good instructor - left out a few hundred steps.
What aluminum wire are you using and how did you cut it? I bought solid 4awg aluminum wire and I cannot cut it with diagonal cutting pliers (7”) :(
what material do you use ?
Wow ,Maybe a daft question but do you remove the sculpture from the base before baking?
when you get to baking it .do you leave it on the wood or ???
I leave it on the wood because it bakes at 250°F, this tutorial isn't very good I will link a couple much better ones
kzhead.info/sun/lrCJppyZb4unp3A/bejne.html this goes way more in depth with adding detail to the clay
And this kzhead.info/sun/hrOwobycm5l7f58/bejne.html shows the sculpting and baking process
does the aluminum wire stay in the sculpture when firing? Or is the wire and the wood removed before it goes into the kiln?
For those complaining about how she missed a gazillion steps... please remember, this is a teaser to get you to go take their classes. They didn't say that, but why else would it give you a website at the end. So you can go take the course. Aka this is marketing.
For those of you who use polymer clay. How in the world are you baking it while on the wood??? Wouldn't it burn the wood?
No it doesn't burn. Most polymer clay only needs to be baked at 275 degrees Fahrenheit for about 30 mins. Thre only problem ive found is that sometimes there wood might warp or bow
Where’s the rest of the videos??
Lovely, thanks for your video. I do unicorns , quite hard. Use air dry clay. You have to work fast, otherwise it dries and cracks.
You can use water with that?
i love you horse
😘🤩😍🥰😍🤩😘
Maybe she isn't going to bake it at all, hence none of the tricks like using foil? Maybe their school has a ton of sculpey stocked up for students to use?
I'm surprised you aren't bulking with foil first.
One day I'm gonna make a bunch of them and sell some
sao làm hay vậy
I’m