KZhead

Building a Jon Boat to Bass Boat in 10 minutes

Anthony Jones
2023 ж. 19 Мау.
199 677 Рет қаралды
Жүктеу

Building a Jon Boat to Bass Boat in 10 Minutes / 150+ labor hours in 10 mins
⚡️⚡️⚡️
Use code "BRIGADE" at
tbnation.net/
at checkout, save 5% off your entire purchase!!!
⚡️⚡️⚡️
PARTS LIST👇
16oz Bass Boat Carpet-
tbnation.net/products/6-x-20-...
Offset Piano Hinges-
tbnation.net/products/offset-...
Recessed Foot pedal tray-
tbnation.net/products/trollin...
Trolling motor mount-
tbnation.net/products/jon-boa...
Ancor marine grade duplex wire-
tbnation.net/products/ancor-s...
Attwood Livewell Pump Kit 500gph-
amzn.to/3mtBiYN
Attwood 800gph livewell fill pump-
amzn.to/3wEBide
Flow Rite Aerator Combo nozzle-
amzn.to/2ReYVZr
Variable Livewell Timer-
amzn.to/3fPSSVz
Heat Shrink Tubing-
amzn.to/488la5X
8 Gang Switches-
amzn.to/3eZNVbo
USB/ Voltmeter Combo-
amzn.to/3iV2bDC
3M CarbonFiber Vinyl-
amzn.to/42OTOOA
Bilge pump hose kit-
amzn.to/3wHgaCT
90 degree thru hull fitting-
amzn.to/3wEBGZe
Stainless steel mesh screen-
amzn.to/3wEBOba
800gph bilge pump-
amzn.to/39QzuUn
Fuse Box/negative bus combo-
amzn.to/3NAheTI
Attwood Nylon Cleats-
amzn.to/3x9peQb
60Amp Circuit Breaker-
amzn.to/3f2uH50
Trolling Motor Quick Connect-
amzn.to/3kWJYrU
Battery Trays-
amzn.to/3XhvT9A
Noko On Board Charger-
amzn.to/3f2BxYi
Gas Struts-
amzn.to/3i4aeyK
Stainless Self Tapping Screws-
amzn.to/3f0WP8F
Perko Fingerpulls-
amzn.to/3iWeOhw
Blue LED Lights-
amzn.to/3CGX2ZS
Battery Kill Switch-
amzn.to/43STjob
Thanks for watching this #jonboattobassboat video! This project was one of my earlier jon boat build projects, initially built and filmed in summer of 2021. A lot of my build process and fabrication techniques have evolved since this project, but this little jon boat will always have a special place in my heart!
This video documents the full build of a 14 ft jon boat to bass boat from start to finish in just 10 minutes. I call this boat a "hybrid" build considering the boat recieved an aluminum frame and resin coated wood and carpet deck. The build out of this aluminum boat shows a full aluminum riveted frame, a custom made livewell, full wiring/ electronics/ rigging, a resin coated wood deck, carpet, custom switch panel, vinyl wrapped cockpit, and many more details! I hope you enjoy this video of the 14ft jon boat to bass boat.
⚡️⚡️⚡️
Use the code "BRIGADE" at checkout to save 10% off your entire order from 6th Sense.
6thsensefishing.com/
BOOSA 9.6 available here:
6thsensefishing.com/collectio...
At WaterLand Fishing Optics use the code "BRIGADE" at checkout for 15% off your order.
www.waterlandco.com/
⚡️⚡️⚡️
Thanks for watching
👇
FIND ME ON SOCIAL MEDIA-
Tik Tok-
brigadeboats
Instagram: instagram.com/invites/con...
or adubjones
Facebook- / brigade-boats-10071137...

Пікірлер

  • Super clean and perfection, awesome job Anthony

    @dickie7311@dickie731110 ай бұрын

    • Thank you 👊

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

    • is there a kit or anything cause my cousin is letting me redo his boat like this one and i wanna make it nice⁠@@AnthonyJonesBrigadeBoats

      @heroicb5315@heroicb531510 ай бұрын

  • What an incredible build. Great job!!

    @BadaBing582@BadaBing5827 ай бұрын

  • Great stuff man, youre one of a kind

    @gilberto_gonzalez@gilberto_gonzalez10 ай бұрын

  • Sweet deal, it came out dope! Thanks for the knowledge and info

    @Casper-sb7gm@Casper-sb7gm10 ай бұрын

  • Beautiful work as always Anthony 🤙😉🎯you are a Craftsman! Aloha

    @krustysurfer@krustysurfer10 ай бұрын

  • One of the best builds, I've seen yet

    @JontaeFischiettie@JontaeFischiettie2 ай бұрын

  • Super clean Dr. Jones! Finally a recessed seat mount, looks way clean. No carpet bumps allowed 😂

    @ewilfinger@ewilfinger10 ай бұрын

  • This boat is sweet! Very well thought out!

    @richierandolph@richierandolph4 ай бұрын

  • Awesome build. Well done👍

    @HinesLureCo.@HinesLureCo.10 ай бұрын

    • Much appreciated!!

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Super clean

    @59johnny@59johnny9 ай бұрын

  • This is so legit. Well done

    @devanbald176@devanbald17610 ай бұрын

  • Amazing work cousin!

    @davemonaco103@davemonaco10310 ай бұрын

  • I hope ya business takes off u deserve it. You're a talented boat builder.

    @basswhisper7767@basswhisper776710 ай бұрын

  • That was an awesome build. Really well thought out. One suggestion would be. Use Nida core laminated with fiberglass and polyester resin. On a floor like that 1/2 inch Nida would be perfect. And would be about half or less the weight of plywood. And you can use a marine paint with some non skid additives. Or carpet. Merritt island supply is a kick but supplier. Also lithium batteries are super light, but cost an arm and a kidney. My dad alway built John boats like this. Unfortunately he didn't have access to aluminum like that. His weighed a freekin ton. Yours thought should be very reasonable for the added weight.

    @tireballastserviceofflorid7771@tireballastserviceofflorid777110 ай бұрын

  • Thanks for the video. Awesome build.

    @Mreffrod@Mreffrod10 ай бұрын

    • Appreciate the feedback!

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Always awesome stuff !!

    @jelly_fishing@jelly_fishing10 ай бұрын

    • Thanks my man!

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • That was so beautiful. Brought a tear to my eye... one day ill have the money to go all out like this, i admire the handiwork

    @Dr_Skillz1188@Dr_Skillz118810 ай бұрын

  • You are a very talented guy. I envy you for have the gift to build. Keep up the excellent work.

    @TheRottwire@TheRottwire7 ай бұрын

  • Anthony love watching all your builds but i would love to see you do a 1448 center console build like a very tiny bay boat style

    @chasepetit3995@chasepetit399510 ай бұрын

  • You built out a sick looking boat and functional.

    @Vikingsmoke@Vikingsmoke10 ай бұрын

    • Not to bad on the materials budget either! Thanks man

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • This is an insane build

    @CGoinsFishing@CGoinsFishing13 күн бұрын

  • Crazy! I would love it too.

    @Barsch-Alarm@Barsch-Alarm2 ай бұрын

  • Id use something like a switch pro instead of all the individual rocker switches. Fantastic build, really inspirational!

    @EFLO3D@EFLO3D8 ай бұрын

  • New favorite channel 👌🏼

    @insertfish@insertfish10 ай бұрын

    • Awesome! Glad your here!

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • You deserve all the fish each time you are on the water. That build was fire!!!

    @willishalliii2350@willishalliii23507 ай бұрын

  • Two years later this motor is going strong kzhead.infoUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite

    @faraon1994@faraon19948 ай бұрын

  • Wow, this guy has some serious skills!! Great job!!

    @arthungerford8972@arthungerford89729 ай бұрын

  • If “Measure twice cut once” was a person

    @StephenWickson@StephenWickson10 күн бұрын

  • What a fantastic build!.... Be sure to put a little dab of dielectric grease on connectors to help prevent corrosion.

    @michaelh7527@michaelh75279 ай бұрын

  • Awesome build as ALWAYS cousin....

    @miltonbrown7275@miltonbrown727510 ай бұрын

    • Thanks cuzzz!!!

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • this is incredible. i want to buy one from you

    @boosieonya3661@boosieonya36619 ай бұрын

  • That was definitely a cool one saved a lot of weight with that aluminum but them 3 battiers prolly pretty heavy

    @dylonharvey4024@dylonharvey40249 ай бұрын

  • Beautiful, how much would one of these sell?

    @Tawfiq.@Tawfiq.9 ай бұрын

  • Clean!

    @BigMaC2014@BigMaC201410 ай бұрын

    • Thanks

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Serious question, how does all this effect the weight capacity, I know aluminum is light but all combined has to add a lot of weight, I have a 12ft alumacraft that I’d love to do this too, but it’s max weight capacity is barley over 400lbs I’m afraid that if I do all this including all the upgrades, me, my fishing gear, motor, battery, ect. Its going to sink the boat!

    @dylanmeeks7786@dylanmeeks77869 ай бұрын

    • My thoughts too

      @squidlox5459@squidlox54596 ай бұрын

    • Have a deep v 12 footer that I did this too. Upgraded the transom and made the front half a deck with trolling motor and a small 5hp outboard, and without the outboard it added around 120lbs -150lbs (conservatively) so about another person. It's a dream one person boat, but can comfortably do two.

      @screaminseaman6121@screaminseaman61213 ай бұрын

    • If you are making compartments in your floor with yoy build as long as you add styrofoam it won’t hurt it

      @Holton-181@Holton-1818 күн бұрын

  • Whoooooooaaaa good job man

    @buccellatobastien4349@buccellatobastien434910 ай бұрын

    • Much appreciated man 🤟

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Where did you get the aluminum hinges and struts for the storage lids?

    @arthursutter109@arthursutter1096 ай бұрын

  • Very nice

    @scottpetrie8707@scottpetrie870710 ай бұрын

  • Do you do custom builds? Man I’d really love to have you make me one of these.

    @thebassbucket@thebassbucket3 ай бұрын

  • Super cool

    @pdx226@pdx2268 ай бұрын

    • 🙌

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats8 ай бұрын

  • I'm impressed. Heck of a job! Very curious on the fish finder stand?

    @blakebarnett5078@blakebarnett5078Ай бұрын

  • Skillz!

    @SDouglas44@SDouglas446 ай бұрын

  • Wow, amazing work. what was the total in time and material?

    @DrinkWetPoopFishing@DrinkWetPoopFishing9 ай бұрын

  • Lookin Good!

    @SMG_62@SMG_627 ай бұрын

    • Thank u

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats7 ай бұрын

  • Smart & I’m jealous. 😎❤️💥👍🏼

    @patlsmith404@patlsmith4049 ай бұрын

  • From the purchase of the boat and mods,How much do you have in the project start to finish..Thanks..

    @thewolfhunter@thewolfhunter10 ай бұрын

  • hella of a build but interested in what kind of motor you are putting on it...

    @mr-ace@mr-ace8 ай бұрын

  • I need you build my Jon boat like that

    @tightlinesfishing-im6cc@tightlinesfishing-im6cc2 ай бұрын

  • How much would something like this cost material wise ?

    @fabianluna8264@fabianluna82649 ай бұрын

  • Arround how much was the cost of materials?

    @asariel0077@asariel007710 ай бұрын

  • How is the weight? Like when you move to the front is it all wobbly?

    @alexj.burroughs6528@alexj.burroughs65282 ай бұрын

  • Any idea how much weight you added??? I'd like to do something similar but don't want to slow my boat down too much 😀👍

    @mikemeyerphotopro@mikemeyerphotopro4 ай бұрын

  • how much the full product cost ? :) nice done

    @DonDomel@DonDomel9 ай бұрын

  • Anthony, did you reuse the middle pieces of wood that you cut out for the hatches or did you cut new separate pieces?

    @nrw510@nrw51010 ай бұрын

    • Reused but trimmed again through table saw to give reveals for carpet laps

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

    • @@AnthonyJonesBrigadeBoats thanks man. What size bit did you use to drill your initial relief hole for the jigsaw?

      @nrw510@nrw51010 ай бұрын

  • Hey where did you get the boat from?

    @Cardcollector-zc3qw@Cardcollector-zc3qw13 күн бұрын

  • Great Job as always.. A Dub. Question is that 15/32 plywood for decking?

    @MrShon-40@MrShon-4010 ай бұрын

    • 1/2 inch exterior grade on this one cuz 👊

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Quick question, aside from the cost of labor, is this actually cheaper than a legit bass boat?

    @coltoncj1@coltoncj17 ай бұрын

  • Okay Mr Jones, let’s see you do a 17 bass tracker “most common “ center console build. I double dare ya!

    @scottpetrie8707@scottpetrie870710 ай бұрын

  • How much does one of these builds cost you to do.

    @McNateDoggYT@McNateDoggYT8 ай бұрын

  • Over-engineered, yes... Badass, yes!

    @Rloc8773@Rloc8773Ай бұрын

    • thanks

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoatsАй бұрын

  • Nicley done.

    @jimrowland6089@jimrowland608910 ай бұрын

    • Thanks man!

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • This has better fitment than a cyber truck 😂

    @johnathantaylor2059@johnathantaylor2059Ай бұрын

  • Genio!!!!! 🙌🙌🤩🤩🤩🤩🤩

    @SPAINANGLER@SPAINANGLER10 ай бұрын

  • I hope to have money like this one day

    @user-pk8lo9wr7w@user-pk8lo9wr7w6 күн бұрын

  • Sign Maker ?

    @TRIGGGERhappyHONKEY@TRIGGGERhappyHONKEY9 ай бұрын

  • How wide is that boat

    @clarkstanton@clarkstanton21 күн бұрын

  • so none of the hatches are dry hatches will that cause issues with the carpeting and wood>

    @darrengillesdarrengilles8336@darrengillesdarrengilles83367 ай бұрын

    • No. That's why its sealed in resin and painted.

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats7 ай бұрын

    • @@AnthonyJonesBrigadeBoats I dunno, I can't see the water getting into the closed hatches sitting there day after day week after week never being able to dry out being a good option, I would think eventually mold is going to be an issue

      @darrengillesdarrengilles8336@darrengillesdarrengilles83367 ай бұрын

  • Question ... why would you poly the wood first then paint ... instead of vice versa or just use marine paint ...???

    @efishnseetv2082@efishnseetv2082Ай бұрын

    • Because I gotta seal it anyhow before carpet. Can't use paint under the carpet glue. I found it better to just coat the whole part, then it gives it a fiberglass like finish to pait the underside for a clean finish. Paint alone usually doesn't last and the wood soaks it unlike a sponge.This is the method I've found after many builds that gives me the best results.

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoatsАй бұрын

    • @@AnthonyJonesBrigadeBoats ty !!

      @efishnseetv2082@efishnseetv2082Ай бұрын

  • Will you still be able to catch Jon's in it or just Bass now?

    @sethlloyd1146@sethlloyd11466 ай бұрын

    • Bucketmouths only

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats6 ай бұрын

    • @@AnthonyJonesBrigadeBoats lol. That's what they used to call my ex. Better throw her back if ya ever catch her.

      @sethlloyd1146@sethlloyd11466 ай бұрын

  • Where do you buy your aluminum?

    @motoxman541@motoxman54110 ай бұрын

    • tbnation.net sells the angled I use..Use code BRIGADE at checkout for 5% off your order

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

    • @@AnthonyJonesBrigadeBoats Thank you.

      @motoxman541@motoxman54110 ай бұрын

  • 🔥🔥🔥💯

    @stevenlocklear7711@stevenlocklear771110 ай бұрын

    • 💦💦💦🙌

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Nice job, but the internal floatation foam is no longer there and I'm wobdering how top-heavy the boat now is. It's got a narrow beam and the tipping point is now on top.

    @MorleyRobertson1975@MorleyRobertson19757 ай бұрын

    • I've been doing this a long time. Never flipped one. It's not a kayak. I understand your concern, though. For you, I'd recommend leaving the foam then and having less storage. For some, they value storage over the possibility of flipping the boat. We did add 150 pounds of batteries in the bottom to offset some upper deck weight. To each their own, I truly believe it's an individual preference and decision to consider in their own project.

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats7 ай бұрын

  • Wheres the cheapest place to find aluminum for a build like this

    @Dr_Skillz1188@Dr_Skillz118810 ай бұрын

    • I don't know..I get mine from TBNation.net

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Do you make and sell boats? If so how much?

    @jakecronerneorth@jakecronerneorth10 ай бұрын

    • Yes..Nowadays my projects start at 8k. This boat was built in 2021 when i first started out

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • Did any one ask how much the material list was? If so, im sorry i missed it.

    @TheHockeyfreak82689@TheHockeyfreak826894 ай бұрын

    • Dude this was years ago. I couldn't even imagine or price the cost now in this economy

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats4 ай бұрын

  • Yeah, lets see it float. Thats a lot of weight for a tiny jon boat.

    @jimmyreece5781@jimmyreece578110 ай бұрын

    • Been floating fine since i built it 2 years ago, thanks

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats10 ай бұрын

  • she clean.

    @icon2535@icon25357 ай бұрын

    • Thanks cuz

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats7 ай бұрын

  • I’d pay to have that done to my 14ft Jon boat

    @daltonstarnes6604@daltonstarnes66046 ай бұрын

  • 150 x 75 dollars an hour is 11,250 $

    @dooberoso@dooberoso10 ай бұрын

    • Yesnt

      @FreePalestine37293@FreePalestine3729310 ай бұрын

  • Do yo build for other people I’m not that talented how much?

    @aaronevans787@aaronevans78710 ай бұрын

  • Sure 10 min. One trip to a home depot is 45min not counting time to locate product or not find available. Just click bait.

    @billjue1753@billjue17538 ай бұрын

    • Not clickbait. Look at the thumbnail. I edited 150+ hours of labor to pinpoint the project in a 10 MINUTE EDITED VIDEO. It's not literally how to build a jon boat in 10 minutes...

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats8 ай бұрын

  • Hello Ant from Middle Georgia can you tell me where I can source some of those flush rivets, I see you using in your builds please, and what size do you use???

    @way75mit9@way75mit94 ай бұрын

    • sorry for the delay. I use 3/16 countersink with grip range of 1/4-3/8. Available on tbnation.net

      @AnthonyJonesBrigadeBoats@AnthonyJonesBrigadeBoats4 ай бұрын
KZhead