Mechanical Drawings & Tools I Use - www.maker-b.com
Thank you for watching :)
I hope you enjoy this as much as I do!
Episode 1 : Piston and Connecting Rod - • Making a 4 Stroke Engi...
Episode 2 : Gear & Valve - • Making a 4 Stroke Engi...
Episode 3 : Crankshaft and Camshaft - • Making a 4 Stroke Engi...
Episode 4 : Engine Block and Cylinder Head - • Making a 4 Stroke Engi...
Episode 5 : Carburetor, Flywheel - • Making a 4 Stroke Engi...
Episode 6 : Final Assembly and First Run - • Making a 4 Stroke Engi...
Instagram: / makrr_b
I think a lot of people that don't know machining or engineering wouldn't have any idea how much effort it takes to make something like this. Especially with how amazing it ran! They always say you can tell just how good a motor is by how it sounds and how smooth it runs... And usually engines on the smaller side (especially 4-stroke) can be a little finicky. When I was in my junior year of tech school i made a single cylinder pneumatic motor that had a small generator rigged up to it, I wired it to a small maglite light bulb and that was about it. It took a good bit of machining and I had to get the tolerances pretty tight but it was an awesome project! It's almost 30 years old into this day you can still start it right up and it purrs like a kitten! Even the original maglite bulb still works
I truly agree with your comment. It sometimes breaks my heart when people talk about this build as if it's not a big deal. Of course, I made it for people's fun, but on the other hand, I don't want people to take it too lightly. In particular, some people ignore gasoline engines as old technology, but I hope they think about the basis for today's new technology. I respect your past achievements and wish you all the best in the future.
what machines did you use because i would love to do this my self
Tools I Use: maker-b.com/pages/tools-i-use
thank you@@MakerB
i just came back from my 3rd semester at machine school, i made a 4 cylinder radial pneumatic engine, it turns pretty good unfortunately the vaulve system we used was not designed for that engine and it is quite primitive, so the first time i tried to run it, it made the crankshaft uneven, so now it dosent run as smooth as before, i shouldreaally just disassemble it and straighten everything out.
now that's a 1 cylinder, 6.6 microliters, 120 mousepower engine that goes from 0 to 60 feet/h in under 3.5 seconds
Mouse power, feet/h hahahahahaha 😂😂😂😂
I'd try to overclock it, might get half HP from it
@@paveljelinek772 maybe a big Garrett turbo will help it make that 0.5 mouse power
NIce
Well done 😂
This was insanely cool! I've been a machinist for many years and this takes it to a whole new level! You could sell this as a DIY kit and I would buy one. Very cool and Good Job!
Glad you liked it!
I would buy one also.
DIY kit? Yes, please.
id buy 1 to make a mini RC car
@@JT-91 Me too
This is like watching an artist work sir! The perfect machining, to the exact tolerances required, to create such a small scale working engine. Mind blown...
That's quite a compliment! Glad you enjoyed it.
if only youtube had Oscars, the award for content creation would go to this guy. I'm a Civil Engineer, but this video made me respect the mechanical engineers, even more. salute to you sir.
That's quite a compliment! Glad you enjoyed it.
Just so long as you still hate architects. All is still right with the world.
Well approved by an aerospace engineer Accountants will be the iternal enemies of engineers more than architects
@@prasadchaturdesale5795 No. Architects are hated by everyone from the carpenters, drywall guys, electricians, sign makers, tile guys, EVERYONE HATES ARCHITECTS
You should have a look at Electrical engineers/Computer engineers at ASML, its almost science fiction haha.
No words, no music, just work. Excellent! Without this “when I was child, I saw an ice engine and..”
If you neither want music nor words just turn off the sound, I do not see the problem 😅
^^^^^He’s got a point
@@joachimfritscher5688 "just work" you missed the most important part of the comment
what do you mean no music! The sound of machinery running and cutting is music to my ears.
@@joachimfritscher5688 but then you miss all the machining sounds.
No talking, no music. Just awesome stuff being done.
I've watched this and now I'm trying lift my jaw from ground. So much precision, so much skills, so elegance, so perfection, so magnificence. Great job bro.
Very impressed. No matter what, you'll always have that little engine as a reminder of your skill. Great job man!
hold my beer... 😂
You made me a bit sad, because as a software developer, I will never have a way to create a reminder which is part of the physical world like this little engine
No
Well, until the brass connecting rod destroys itself. Or the piston galls itself against the cylinder sleeve. Maybe he threw some molybdenum disulfide in there or plated the cylinder or piston.
One day it will be in the landfill and you’ll be in the bone yard
On behalf of all engine heads, thank you for this awesome video and thank you for your creativity. God bless 🙌
Thank you very much!
Literal engine heads or engine heads? 😂
For real man I'm blown away with this
@@MakerB where are you from
@@isaacsrandomvideos667 engine heads
I spent my youth and early adult years competing in racing control-line model airplanes that had 2.5 cc engines. (FAI Class F2C - Team Race) There were many aspects of the sport/hobby that were required in order to be successful, from a light but strong model, to a high performing quality motor. As nothing competitive was available off the shelf at hobby stores, everything was hand made, from the model, to in some cases the motors itself. We had a highly skilled machinist who for several years made the motors from scratch, while in other years we relied on motor specialists who had mini mass production runs, and made their motors available for sale to some competitors. Motor technology was continuously refined and performance improved and the motors became more capable. My brothers and I raced planes with diesel (compression ignition) two stroke motors that had to fly in 100-lap qualifying heats, and 200-lap finals. There were strict limitations on plane dimensions, including fuel tank size. Essentially our plane had to fly at about 125+ mph for at least 33-laps on 7-cc of fuel, then make a pit-stop to refuel. A really good 100-lap heat race time including two pit stops is in the low 3-minute range. A successful racing engine is all about metallurgy and precise tolerances. We bought some Russian-made motors which were consistently winning at the time, and our machinist couldn't figure out how they made the pistons, which are critical to success. It appeared to be some sort of sintered blend of aluminum that was high in silicon. As our racing motors were always run lean to get the most range, they ran very hot, so the science behind pistons was in how to control thermal expansion at high temperatures so the engines didn't seize while running hot, yet expanded at the same rate as the cooler cylinder to maintain compression, while being hard enough to show little wear after many races running with low percentages of lubricant in the fuel. Cylinders were typically chrome-coated and had a very slight taper so that when pistons were lapped to fit they were 'tight' at the top of compression, yet ran 'a little loose' through the rest of the bore to minimize friction. We had to learn a lot about everything from aerodynamics; construction and design techniques; materials science; combustion and fuel science; to competition strategy. We were lucky to receive 'free samples' of new high-strength materials, such as just developed Kevlar and Carbon fibre, from companies like Dupont, and fuel additives from Shell, who were willing to support our efforts. We we lucky enough to qualify on the Canadian team about 6 times to compete at the FAI Control-Line World Championships in Europe in the 1970's, 80's and 90's. It was a great learning experience and an opportunity to travel and represent our country in a highly competitive and technical event. A quick search on KZhead of - FAI Class F2C - Team Race - will show what the racing is about.
There's a joy in my heart I can't describe with words when I see someone do something like this for the sake of doing it.
I love how he didn't explain anything verbally and that there wasn't any background music. Just the sound of the machines sublime!
If I may ask, how great did it feel after 1000 hours of design and building to hear that engine start successfully? This was beautifully done and well executed. Nice work sir!
I thought 1000 hours was gonna be the time lapse of engine wear after 1000 hours of use. :) Wasn't disappointing.
I was thinking the same thing. It must have been a very gratifying feeling when it cranked up.
I would have dropped a load in my shorts.
@@devinb5937 Have you ever heard of such thing as doing stuff for fun? No?
Wow @@devinb5937 they should put you in charge! I’m sure we’d be well on our way to finally solving climate change as soon as your administration cracked down on the tiny machinist hobby community.
I'm no machinist, but it's easy to tell you know exactly what you're doing right down to the spec. That was a beautiful build, bravo sir.
No music, no voice narration. Perfect video.
Fantastic planning, design and manufacturing skills - well done. I started my apprenticeship in 1978 and you brought memories flooding back when you used the Engineers Blue for marking out - I had forgotten that stuff ! Great job !
still remember the smell of eng blue... the bigger challenge was manually scraping a flat-pate. We just a sharpie now
You must be very. Senior now sir
If you had started building that when you did your apprenticeship you might have finished it by now lol
I've seen quite a lot of miniature engines including some radials up close and personal. Made by guys/gals that have an arsenal of machines to fabricate them, But I have to say the precision and accuracy, let a lone the design, that you've done with a Sherline is the most impressive build I've seen in my old age. I enjoyed the build videos but this compilations is an inspiration in machining and videography! Thanks very Much for the ride and hope you continue to test yourself with projects like these!! Hat Tip ~PJ
That's quite a compliment! Glad you enjoyed it.
Unlike every other video I've seen, this is literally the most productive video and time was used very wisely on this engine. I've seen videos of people doing dumb stuff and TRYING to "invent" things we will never do or use a single day in our lives. This video just taught me that there really are talented people out there that are actually productive! Very rare to find people like you! I'll give you a 100 out of 10. Over all, this engine was fine crafted with precision, and a very clean engine, clean cuts on every component. You must be the most talented person I've seen a video on.
小さな4サイクルエンジンが動作する姿は本当に美しい｡
When you first began to turn it over I realized I had actually slid forward and was literally sitting on the edge of my seat. When it started I actually cheered out loud. Fantastic work!! 🏆
I kinda did too 😂
Sarcastic
The sheer accuracy of the design and the making of each component is very entertaining to watch. Final product was awesome. Reminds me of how scared I am about making something cuz of low accuracy haha. Really great stuff tho never disappoint 👍
If your designing something like this, id go with the smallest screw you be comfortable with tapping and available at home depot.... for me that be either 10-32 or 10-24 making this engine be a bit bigger, thus increasing clearance sizes a bit
This is one of the most impressive things I've ever seen in my entire life. Well done.
That's quite a compliment! Glad you enjoyed it.
The average person can't even spell carburetor, let alone make one from scratch. The amount of knowledge you must have to create on this level is never appreciated on the scale it deserves. So cool.
Excellent work. It looks like the piston gained an o-ring by the time you assembled it ;) What type of o-ring is that? Does it hold up?
I was watching ur videos a minute ago and now I find you here, thanks for your videos
Yoo whatsup man
fancy seeing you here. you should try a project like this, would love to see how you go about it with all of the tooling and machinery that you have access to
Oh my gosh your channel is the best
@@baylornorris but how could he troll Wife Made Here with an engine? Actually, forget I asked - Shane would find a way.
This really blew my mind away. Amazing application of engineering, design & craftmanship. Making stuff at this scaly requires some scary pinpoint accuracy. Super cool !!
All that anticipation, and he never opened the throttle to hear it scream. Still great piece of mechanical art.
Awesome, it took like 10 seconds of watching a jet needle being made to work out how accelleration works on a practical level - that's mega! Thanks!
This was so satisfying to watch, I was immersed the whole time, and when it fired up, I had the biggest smile on my face. Faith in the algorithm restored. Thank you!
Glad you liked it!
Awesome !!! :) Now please 'fix' 2-stroke motorbike engines so I don't have to buy a crappy 4-stroke 125 cc , cos 'Climate Change BS'...!!! :) Cheers !!! :)
What is 1000 hours ? 15 min is the video, but Idk what 1000 hours.
@@fynkozari9271 Im pretty sure it is the amount of time taken to fabricate/machine out all of those components
All a person can say is, "Wow!". You are a very talented machinist.
This is just amazing. The delicacy, the precision. Wonderful example of machine work here 🍻
this is amazing
Wer mit solchen Heimwerkermaschinen so genau Teile bearbeiten kann, hat echt was drauf, weil man zum eigentlichen Aufwand noch die Macken und Abweichungen der Maschinen "kompensieren" muss, was dann allgemein als Berufserfahrung bezeichnet wird. TipTop!
This is amazing! It's crazy how they designed and built motors without CAD back in the day
They used PAD ( paper aided design
@@theltcrowe9000 👍🗒️✏️📝📐📏🔧⚙️
CAD is entirely based on old school machining and design principals. They just drew all this stuff by hand lol
I took a couple drafting courses back in high school. They teach the basics with traditional hand drawn work before moving on to the cad software.
@@matthewdilger6755 That's the sign of a good school. Not every machinist will have access to CAD, and the fundamentals are always going to be there when the computer isn't!
This is a phenomenal video. Thank you for posting! I wish that everyone had a fraction of your work integrity.
Glad you enjoyed it!
The precision at this scale, insane!
Impressive! In scale, accuracy and probably in lots of ways I'm too ignorant to appreciate, this is impressive!
This is now one of my all-time favorite videos. 😭❤️👍🏼 It's so comfy to watch. The craftsmanship is amazing.
Wow, thank you!
When it pops out at 1-45 , that was purrfect m8, I’m a qualified mech. Engineer but haven’t worked on a machine in 30 yrs I really miss it sometimes, that is brilliantly crafted also brilliantly shot video , well done you !!!
Absolutely unbelievable. One of the most impressive things I have ever seen on the Internet.
本当にすごい！ 男心をくすぐられワクワクしながら見てました。
Absolutely brilliant! I love watching people do precision mechanics, and wish I had a lathe myself.
I audibly said "yes!" when you popped the piston out of the cylinder! Great stuff
Your videos should be the benchmark for KZhead upload criteria. Focus on Key Subject Matter - 10/10 Effort in Production - 10/10 Lack of self-bloating - 10/10 Lack of Clickbait - 10/10 Thank you, Sir.
Is design time included in the 1000 hours? That's almost half a year at 40 hours/week! Thank you so much for such a great video!
A week isn’t 40hours long
@@radicalracing09 I think he is referring to the typical working week which is 8 hours a day, 5 days a week = 40 hours.
@@radicalracing09 great observation
@@radicalracing09 hahah
@@radicalracing09 40 hours per week, not a 40 hour week.
The amount of precision, and how beautifully it runs is amazing.
Beautiful! Just beautiful. This can about make a grown man weep.
After watching this short video I instantly subscribed! Aside from being fortunate enough to have all this amazing equipment at your disposal, you are extremely gifted and talented! This is absolutely brilliant work! I wish I was half as gifted as you man!
Thank you!!
@@MakerB I only have two questions. First, did you design/engineer the engine yourself? Second, why do you not have more videos like this for me to watch man?! Lol...
Thank you for sharing something as amazing as this with us. I know absolutely nothing about engines, or mechanical engineering at all, but I appreciate that you decided to show us this. Can't even begin to imagine the amount of work that went into this.
I'm tipping 1000 hours worth.
That's the lovely thing about it though... it's made out of stuff that anyone can understand. No computers, no quantum mechanics, just pieces of metal moving in circles and back and forth to push things around.
The precision of everything from design to the end product of the engine (along with the editing and video shooting as well) was so nice 💯💯. This is going into the record books, and I hope that upcoming generations of engineers watch this and get inspired. Thanks a lot 💯😇
That's quite a compliment! Glad you enjoyed it.
This would be a great desk ornament, a work of art . I would buy one in a heartbeat
Simple, just take a little metal and a sophisticated lathe, and just like that you got an engine. So easy even a child could do it. Laugh out loud. Great video thanks.
Fantastic! A thing of beauty. I could feel the thrill when you assembled it!!!
Beautiful little model engine! Nice to watch the build. Thank you for sharing this build. I think Joe Pi needs one like this to power his miniature workshop's future Transmission to run the tool machines with belt drives.
it is beautiful, it is mind blowing and it is fantastic. It is all the things that one majestic piece of science would have Love it
Still working on the turbo, ha! =D A piece of art!
Most people don't realize how hard even the 3d drawing part is. Amazing work!
Who in the freaking world dislikes this? This is incredible.
we will never know
Mini driver 🤷♂️
Sad people
People without the skills to make one themselves.
@@johncrowley5612 I don't have those kind of skills and I didn't even dislike. Maybe the dislikes came from 2 stroke guys
You have some insane off-center chucking skills. You make it look easy!
Seeing that gear being made... In my head I just hear Chris Fix "Beautiful"
As a mechanic and a machinist I really love this! Outstanding work!
You made an entire, working engine! This is beyond anything one would ever expect to see on KZhead. This is beyond outstanding even. It's a wonder.
How did you think the first engines were built.
@@gregdaweson4657 Like this. But it's so teeny. And it's so something that I could never do. My point was that some people are so talented.
@@tracybowling97 Beyond anything one would expect to see on KZhead? You know we have rockets that travel to space? Other miniature more impressive engines? Basically anything.
@@genogeno7289 ugh! Can't I leave a fucking comment? I like what I said. I know what I said. And I stand beside it. I just meant, ppl can do lots of things. And you get to see so much on KZhead. Much more than I ever expected to see.
You might like 54Garage, that guy does some really interesting stuff, like cutting an engine in half and getting it running.
Sounds like a Briggs and Stratton. Amazing work.
Excellent . This video show me how the engine work. thank you so much.
This is not engineering. This is art. Truly amazing work
Engineering is art, my friend!
Absolutely stunning! I love seeing such a complex final product being made from scratch!
That is extremely impressive. Surprisingly loud too.
Gotta be a good feeling to make your own motor, extremely impressive.
i'm still convinced the combustion engine is one of mankind's most impressive engineering feats, second to nuclear fission.
How about computers?
It's certainly one of the most important ones. Modern society would look a lot different without the use of internal combustion engines.
Pretty much the entire economy runs on engines
Think the order is incorrect.
@@jimmydcricket5893 so you think combustion is mankind's most impressive feat? Could you explain?
Truly a masterpiece. I may have missed something but I don't recall seeing any lubrication or oil in the crankcase.
I've never said this sentence before but... That spark plug is adorable!
You know you’ve got some serious talent when you have a 15+ minute video and not one word is spoken and I watched the whole thing.
Agree, 100%
Agreed
i was thinking its a beautiful model and had my doubts it would actually take the force of combustion, even at small scale, but then you showed it running. completely blew me away with that. amazing. absolutely amazing
shoulda let that engine run for a full minute with sound at the end. Make another video where it just runs. It's so satisfying.
I can just imagine the moment the engine roars to a start he’s standing behind the camera all stoked like: “It’s aliive! It’s alive! Hahah!”
Wow that thing is a piece of art i mean imagine how tight tolerances does a engine like such need to work and this guy achived that in his home shop with commercially available machines 🤯🤯
Seeing that little cam shaft spin true was probably the most amazing thing I've seen
That motor sounds super healthy definitely surprised!!!
That was AWESOME.. I was amazed at how good that little engine sounded..
Thank you!
Great video, many thanks. Keep up the work on the small machines. It is encouraging to folks who do not have room for larger machines .
So amazing. I could watch these types of videos over and over. So much talent. I know the engine is not a new thing but to watch people craft the parts out of blocks of metal stock just amazes me. It takes a lot of talent and know how and patience. Great work. Certainly enjoyed the video.
Big thank you for watching this video
KZhead algorithm doing its job perfectly. Amazing job! Some serious skill and patience! I'd spend money to have this on my desk.
This is the coolest thing I've ever seen. Hope one day I have access to CNC machines.
As someone who has purchased a mini engine before it's far cooler watching a machinist make one by hand
Hard to comprehend that one person can have the engine design and machining skills that you have. Amazing project!
Muito bom, excelente!!! Parabéns, abraços do 🇧🇷
amazes me how complex production chains nowadays are. Its mindblowing man
Absolutely amazing, impressive work. Thank you for sharing your skills with us.
Love it, that engine sound at it end just gives a great felling of satisfaction.
that was some fine skills at work there. Joy to watch you work.
Glad you enjoyed it😀
I'm speechless, you sir, are an artist.
I admire both your skills and imagination. As you were showing the various components you were about to machine I was thinking that I would have absolutely no idea were to even start. Well done!
Thank you very much!
She makes a whopping 2.5 horsepower at 700 rpm she is a beast in the engine world And I thank your for building this it’s so cool
she ?
@@thexxangel it. the engine. You know
He
@@Mani-cc5lo idk maybe
i know its a joke but in reality its probably closer to something like .2 or .3 hp, you could probably easily stop it by grabbing the starting knob
A master mechanic at work ! Brilliant
本当にリスペクトしかない素晴らしい技術と知識。１０００時間もかかるんですね。マジでスゲー！
That is awesome. I can't wait for my machining courses, stuff like this inspires me!
Fantastic work! One of the best DIY engines I've ever seen. My only disappointment was that you didn't open the throttle a bit when it was running. I'd love to se it rev!!
no
I have never seen something so miniature yet so beautiful
If these were mass produced. I would defiantly buy one
absolutely mind-blowing! could watch it over and over again. Congrats to this amazing project
Glad you like it!