Amazing Heavy Duty CNC Machine. Multi-Process Vertical Mill Turn Machine. Crankshaft Rough Milling
Amazing Heavy Duty CNC Machine. Multi-Process Vertical Mill Turn Machine. Crankshaft Rough Milling
Chapter:
0:07. Machining very large and heavy workpieces
1:44. Vertical Lathes
2:32. Crankshaft rough milling
5:22. GMTK Multi Process Vertical Mill Turn Machines
7:41. Heavy Machining on CNC Boring Machine
9:04. Gleason Titan 1500G POWER GRINDING
---------------------------------
Credit:
Siempelkamp Group
www.siempelkamp.com/
FERMAT MACHINERY
www.fermatmachinery.com/de/
BOST MACHINE TOOLS COMPANY
www.bost.es/
GMTK Multi-Process Machining S.A.
www.gmtk.es/
Gleason Corporation
www.gleason.com/
------------------------------
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the KZhead Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.
Thanks for letting us hear the actual process sound and not adding stupid music!!!
I used to work for Gleason Works early 1970's out of High School. I would go watch the gear-cutting and gear-grinding machines while on break. I ran a cylindrical grinder, grinding the O.D. and tapered surfaces of the collets that were used for holding the uncut gear blanks in the cutting machines. That was back when Rochester, N.Y. had REAL jobs at good pay! I always liked grinding -- the finished product looks so nice!
- @ CTLanni - Haha... Glad to hear you were interested being involved with mechanical arts in and out of high school. People like you are a dying breed... I'm speaking now about seeing the future generations that'll be needed and capable of continuing in these highly skilled trades like machining and constructing. Many public schools today consider the teaching of the three Rs as being r@cist and, that it's more important to use proper pronouns and gender identities than to learn actual skills that'll foster confidence, self independence and knowledge as a satisfactory purpose in life.
luckyyyyy thats so cool though!
Worked as a class "A" grinder hand for 30 years in job shops, no production, and I concur, when a customer sees a finished part, what he sees is the grinding.
The video literally explains what a vertical lathe is and then goes on to show a horizontal lathe. SMH
Thought the same😂
Just turn your phone 90 degrees
@@hugovel2717 instructions unclear, snapped neck.
ChatGPT took the day off from writing advertorials
Its also said “vertical turning lathe” and thats a misnomer. It’s Vertical Turret Lathe.
Imagine showing this video to a group of the most skilled machinists 200 years ago, it would blow their mind how much material we can move in such little time
It blows my mind 200 years later.
We learnt how to use fossil fuel energy, bad thing is does not last forever
200 years ago 😂
Laughs in Ancient Egyptian.
@@spencerhardy8667 no you're right Egyptian CNC machinists were far ahead of us...
Graduated from a technical high school where I became a machinist. At age 23 I interviewed at GE to operate a 4axis horz born mill. I machined gear boxes that held all the gearing and other parts. The average casings needed a crane to set them on table and were the size of a large refrigerator on its side. I expected average machine and average size parts. When i went for interview by supervisor and superintendent in the building I would work in. I entered a door beside a large garage door. The first thing I noticed was the largest vert turret lathe I had only seen in books. 2 overhead cranes were setting the largest gear I had ever seen on to VTL. I learned later it was a bull gear for a U.S. carrier. I was working in the GE gear plant in Lynn MASS and nothing was small. All HBM used the slotted steel floors as their table. We specialize in sub gearing and reduction gearing for carriers down to destroyers. At te end of 4 bays the units were assembled and tested . I won a bid for the highest paygrade with an rd classification. 15,000 union employees. The job was GE develope 3 sections that make up one propulsion for the DDG ARLEIH BURKE class destroyers. Specifically designed natural gas turbine connected to high speed reduction with hardened gears then electric propulsion. The reduction gearing case unit almost half the size of old reduction gearing and operated at higher speeds. They installed the largest 7 axis cnc horz boring mill at that time in U.S. mid 80s. The construction requirements required pillars of cement going down over a hundred ft to the solid rock. Below the machine it had 2 stories consisting of electronic devices Anand pumps and other stuff. That was 35yrs ago and i still brag about what we did. Different types of electric drives also started appearing
Those gears are incredible and machined so precise I can't even
1:48 a vertical lathe? 90 degrees out there lads.
A lot of process, a lot of time, and a lot of technology went into it. thank you for the video!
That is the biggest CNC I have ever seen! Also the biggest lathe I have seen. It's funny like the lathe is so massive, but the tools are the same you would use on a traditional lathe.
The grinding is insane
Ich habe 12 Jahre bei Goodyear auf ähnlichen Maschinen gearbeitet. Für mich war es immer ein sehr interessantes Arbeiten.👍
The machine best in heavy metal sound award 🥇
This is proper manufacturing.... Thrisk involved must be immense.
The amount of metal removed per second is amazing. It's like cutting wood...
Jhunjhunwala gang's here
I’d like to see the huge machines that make this one.
I was " in aw " when I was programming NCN 's in trade school 1973 !
Somente mecânica de primeira linha, mecânica fina!!👏👏👏👏🇧🇷🇧🇷
While in high school I was given machinist jobs for the summer months. First machine shop was in a large old shoe factory. It was now many smaller machine companies. Half of the machines still ran on the belt system. A long shaft running along the ceiling with belt going to each machine. Other section had modern machines. In my shot machinist career I operated old belt equipment to the largest 7axis CNC horz boring mill in the country. 77 to 87
That is actually really cool!
I was a machinist for 28 years and I've run some big stuff but nothing like this!!
Dam the insert change on that bost
I do not get amazed that much these days, but this, holy shit!
how long does it take to change the inserts on the mill in minute 3:00 :D
Sem palavras!
Muito top mesmo canal do torno Sucatinha está fazendo elogio a todos os vocês
Can you guys make a gear for my watch😮
Not sure why, but I was a little surprised to see the processes are the same as smaller scale machining. With the exception of the huge twelve-jaw chuck, that lathe looks just like a dozen others I've seen, even the tool looked the same...
This is completely insane
1:45 is a vertical lathe ? Yeah, maybe after a couple beers going down sideways ;)
Wow!!!
Морські дизелі виготовляються?
I wonder what machine made the machine that makes the parts? That goes back and back to the beginning of machine tool design. We think we're pretty cool with all the tech we have now, but the lat 1800s had huge machines that did some of the same things, just not to such close tolerance. 2 story tall gear hobbers. What machine made them? I just think this needs some perspective.
Did you record this with a furby??
Like art.
Jumpscare warning at 0:46
Some cant tell what is vertical and horizontal lathe... You have to love some of the comments if this is your every day bread.
This is what a modern company does to win jobs. Nice clean manufacturing building and everything painted. Machinery up to date and looks like treatment of employees is great. I worked in an old school GE gear plant in Lynn MASS and now it is a vacant lot. Most of the large horz and vert boring mills were pre ww2 and manual. The union wanted the machinist in the new factory of the future to have high seniority and top pay classifications. GE built the state of the art factory an based future decisions on results. So how do you think it went. Put high seniority and high pay employees that don't need to worry about the future. Stupid grievances of small issues just to make conflicts. After 20 or more years your enthusiasm is gone. GE tore down this massive investment and no more expansion in Lynn. The union never budged on issues but if they did there was plenty of space. Could of increased employees and the future for them. Instead there is a supermarket at the torn down factory of the future location instead
Unions wrecking what they claim to protect just like a despotic leader of a country
Giỏi 👍👍👍
Look at every cutter they use... its 10's of cutters pr tool... that is the key to efficient material removal rate!
I have to just say this. As a person that operated a 7 axis gantry mill for years. you can not appreciate this video fully unless you actually see it in real life. Some of the machines in this video are complete monsters that eat steel like nothing. Crankshaft wheel cutter is taking 8mm bites of steel out of that cranks every time tooth chews a piece off.
Great
9:13 "TOP" written on the grinding stone is mounted on the bottom
Isso que eu chamo de " mordida mineral deliciosa " ..... faz bem para a saude da economia e faz a industria ficar cheia de mexidas harmoniosas. E esquentam as ideias dos investidores.
Without us machinists all y’all would be banging rocks together again
👍💯
What has a crankshaft that big?
Abang mau kemana 😎🤓🥳
Que están maquinando JAEGERS?
Look like GUNDAM part 😍
Нихера себе фреза
My ears are telling me how uncomfortably loud it is in that building and nobody seems to be wearing ear protection. lol
Machining? Or mechanizing?
I feel so small being a 30 year aircraft machinist. I thought my triple spindle Cincinnati mill was manly. 😢
why come no coolant
ни дай бог оператор ошибётся так и не рассчитается за всю жизнь
And yet they say we can't go "BACK" to the moon...
В Пакистане делают тоже самое, но УШМкой и на глаз.
И всё работает.
@@Vik_ru но недолго
3:20 - I'd hate to be the one that has to change all those inserts on the Bost crankshaft milling cutter head.... Even worse would be the one paying for those inserts @ $10-20 USD a piece!
holey shit damn I wish I had one of those freakin machines 🧢🤔👖
I know it would take a tiny bit of extra effort, but most of these images have no scale. Nor is the frame rate apparent some places. I would like to see specs for the operations - power, forces, pressures, cutting rates, materials, size, mass - whatever you have. It is possible to put that as overlays in HTML5 over the video area. Mostly there are processes here that 5 Billion Internet users do not have time to look up or translate to specifications. The pace of global technology might well increase many fold for solar system colonization. Evaluating suppliers, service providers, facilities and capabilities might hinge on near real time gathering of capabilities and decisions. The AIs can do that now, but it could become the norm, for most design and engineering to be done by human-AI teams, in near real time. Richard Collins, The Internet Foundation
around 3:30 u said "Bosts unique taylor made is the best on the business" did u mean that literally, that its best on your business meaning it would b the most efficient, easiest choice for a company, or was it supposed to read "its the best IN the business"* ?
Can you make me a zombie proof house?
you need an english proofreader to check out your captions.
"size does NOT matter"
1.20 No safety glasses 🙄
lol @ 12:07 "spezial" well this wasnt edited by an english speaker :p
The world is so boring. Machines like this show that we SHOULD have giant floating cities travelling the seas, moon bases, giant asteroid mining machines and mechanised apartment blocks that shift with the weather and time of day. Instead we all sit here in our little cardboard boxes like battery chickens whilst billionaires with no imagination do absolutely nothing imaginative with all the world's wealth. Absolutely dismal.
That's not a VTL, just a big ass lathe.
lol . . . 'satisfying' . . . yeah, that's a different way to describe it.
if you get hit by a chip , your dead 😜
The different cut to different camera angle ever 1.5sec sucks. The editing is likely to give seizures
Nothing like a high quality infomercial to Spotlight new 'stuff'. Amazing yes, but I had to turn off the sound, to avoid the promotional spiel underneath it. This stuff is getting bad these days and it's harshing my buzz.
This could have been a really cool video. It's too bad each scene only lasts about a second. Wayyyy over-edited.
Good Luck running those machines with wind and solar power and no oil.
Nice Videos and machines - bad editing
terrible video
Not vertical lathe.
0:45 who da fook is that??