Incredible Heavy Duty Lathe In Working. Modern Automatic CNC Machine, Boring And Milling Portal
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the KZhead Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.
Hello my friends, what do you think about video and the information in the video?
Incredible performance. Great work.i also lathe oprater in Pakistan..
I am interested this job
Вот это и есть современные технологии. Станки - чудо.
Unreal. Thank you for your time.
İzlemek terapi geldi❤❤
Какие же это технологии Не каждому дано
When you watch these behemoth machines make children's toys of solid steel you feel like uttering something villainous like "Behold! The industrial power of mankind!" Great vid!
Hey, I'm an equipment operator too so I thought I'd drop by and leave a comment.
Das ist wirklich toll, Ich wünsche euch alles gute bei Arbeit.
VERY IMPRESSIVE.
King Dom 😍🙏😍
❤❤❤❤❤
I liked it. I worked as a machinist for 18 years, learned about it while working at WEAN in Ohio, we had machines that large I think the widest three head Ingersoll was 14' wide. I mostly ran a lathe with 10' diameter capacity and VTL/VBM up to 12" tables. Used what I learned, taught machining in HS and Engineering in college. LOVE the big work but something I always wanted to learn was to program a 5 axis CNC, and I wondered what software they were using to program it. I mention that because the first CNC I ran was programmed using APT, and taught it for a short while. I miss machining but love seeing these.
I worked for GE gear plant in Lynn MASS in early 80s 3yrs out of high school. Every machine was huge and I couldn't believe I would work on the big boys. Every machine needed an overhead crane. All horz boring an mill used steel floor as tables. First machine I seen when i went in for interview was a huge VTL having an over 20ft bull gear for a U.S. Navy aircraft carrier. Left after 5yrs to work for a utility company
The best software out there in my opinion is Mastercam and Solidworks. Full five axis packages are standard.
@@DavidJohnson-rd5wy I used to teach Mastercam in HS and my kids came in second at State VICA competition. Also taught APT and FeatureCam, all were good for their time
I love the video, but am i the only one think the information provided are useless? i know it is about the machines(not even has details about the machines), but it would be nice we know what are those parts, and if you can make a longer video from start to finish on each part i would enjoy it more. in this video you it is like you go buy a candy bar bring it home open it then not eat it lol 😂
Sir I am cnc opretor experience 10 year know cnc programing and setting
Are they using water for cutting fluid a few mins in?
Is water mixed with an anti-rust inhibitor. Doesn’t make any sense does it but that’s what we use at work as well!
Not water, water soluble coolant, synthetic.
Some coolants are clear
On a milling maschine without safety glasses.🤦🤦🤦
I never quite understood why lathe turning is never combined by rotating milling head?
No advantage to have an interrupted cut. There are mill turn machines, but the milling is done using the lathe spindle at low speed or locked at a certain position.
@@topduk on huge lathes you actually don't want to stop rotation and let part settle. We always kept very slow and only stop to measure or get inspection
You'll never get the same accuracy by trying to mill those features. Besides, you can remove much more material turning, with much less tool pressure on your workpiece.
@@DavidJohnson-rd5wy Not for accuracy per say but for speeding up rough removal of material.
Place I work for actually sort of does this occasionally with some big parts. Not sure exactly what the rationale is. A 4" 45° lead facemill is mounted on an angle head, itself at something like 45°, maybe less, and a plunging strategy is used for initial roughing. The part/table aren't rotating, just indexing from one position to another and cut come from the ram. Might be to keep the cutting forces aimed at the table.
Where it is? I mean country name
Haidenhain top ma siemens 840 d è una vera merda
🤩🤩🤩👍
At 3:40... Your employee is not wearing safety glasses!!!
Kalau betul mikhana mengikuti ajaran nabi Isa atau yesus,babi jgn dimakan,sebab nabi Isa atau yesus tidak suruh memakan babi,siapa yg mikhana ikut ni
Это в Украине?)))
3:42 what's wrong with this picture?
- No safety glasses near chip fly zone from one snap. But next view show us that operator stands in a 4-5 meters away and that safety is ok.