KZhead
Автокөліктер мен көлік құралдары

Brilliant Skills Amazing Technique How The Made A Ship’s Shaft The weight of Shaft (15)Tunns Is

PK Mechanics
2023 ж. 12 Ақп.
1 057 371 Рет қаралды
Жүктеу

#BrilliantSkills #Amazing #Technique How The #Made A Ship’s Shaft The weight of Shaft (15)Tunns Is

Пікірлер

  • Extreme skill ! If you had the means of Western countries, you would do even better. But it is the genius of your workers that is the best. I wish you good health and great... great financial health. Good luck. (Algerian)

    @ammiali9979@ammiali9979Ай бұрын

  • My thanks, from Canada.

    @rogerrowsell5926@rogerrowsell5926 Жыл бұрын

  • How could you control the Vibrations for such a long heavy shaft, I assume your Lathe is a very good Lathe for a heavy duty work. Good Work, I keep watching & enjoying your good skill.

    @khalidqanah2844@khalidqanah28444 күн бұрын

  • It's great to see something productive without the restrictions of Aerospace/Nadcap, Brilliant work

    @derekb4731@derekb47312 ай бұрын

  • good job brothers🇵🇰 pakistan from 🇸🇴 somalia insha alaaah

    @kamadagecadde3589@kamadagecadde3589 Жыл бұрын

  • Darn- I was waiting for them to load it on one of those 3 wheel scooter trucks.

    @oldschool1993@oldschool1993 Жыл бұрын

    • Instead, a lorry with bald tyres!

      @nigelparker5886@nigelparker5886 Жыл бұрын

    • That’s funny

      @chipperkeithmgb@chipperkeithmgb Жыл бұрын

    • Thats just a big three wheel scooter. Pulled by four donkeys that were ready to go.

      @martinswiney2192@martinswiney219210 ай бұрын

  • Greetings from Turkey to my Pakistani brothers.

    @behlulsimsek8708@behlulsimsek8708 Жыл бұрын

    • Me too from Egypt to my pakstani brothers

      @easylife5531@easylife5531 Жыл бұрын

  • This is probably the cleanest machine shop I’ve seen from India! And organized!

    @Hyliner1983@Hyliner19834 ай бұрын

    • Haa

      @alimamyshabanalmalicbangur2507@alimamyshabanalmalicbangur25074 ай бұрын

    • Beat guess is India but not necessarily.

      @USA-freedom@USA-freedom2 ай бұрын

  • Beautiful machining. Enjoyed this video

    @RahulRshenoy@RahulRshenoy Жыл бұрын

  • I really enjoy this really heavy work, thanks!

    @russelljohnson6243@russelljohnson6243 Жыл бұрын

  • at 17 minutes no keyway, then they spin it at 18 minutes and magically there what looks to be four or more 4" x 20" keyways. Would have like to see how that was done....

    @earlphillips6393@earlphillips6393 Жыл бұрын

  • big lathe, good work!

    @__austrianoldboy_9861@__austrianoldboy_9861 Жыл бұрын

  • These are brilliant people. I am fond of watching such videos whenever I get time. They only need support of government to produce wonderful things.

    @MuhammadNawaz-bj3zi@MuhammadNawaz-bj3zi9 ай бұрын

  • It is a splendid show!

    @putuo-transformer@putuo-transformer Жыл бұрын

  • Guys you are doing a good job with limited amount of resources; I guess the life must be cheap in Pakistan as safety gear is non existent - machinist working without safety glasses!!!!!!!!! Loose your eye and the owner gets a new worker - cheap.

    @nazimbaluch6020@nazimbaluch6020 Жыл бұрын

  • Chao may ban nhe thanks ky thuat cua ban con tho so qua thanks nhin thay cau nang nguy hiểm quá

    @takaharamakoto9999@takaharamakoto9999 Жыл бұрын

  • A steady rest or maybe even two might be useful for the usual reasons.

    @sunny71169@sunny71169 Жыл бұрын

    • Yea....I was feeling bad for that live center.

      @recoilrob324@recoilrob324 Жыл бұрын

  • اليوم فهمت كيف صنع هؤلاء الناس القنبلة النووية رغم فقرهم. !

    @fialazoubir6902@fialazoubir6902 Жыл бұрын

  • I love these videos! Nothing is impossible. 💪💪👍👍

    @Zoli049@Zoli049 Жыл бұрын

  • impressionnant 💪👍👍

    @R.tt74@R.tt742 ай бұрын

  • Impressive skill…..Quite amazing👏💪

    @Meagain921@Meagain921 Жыл бұрын

  • Exlentent job paji why not use the coolant love from EAST PUNJAB🇮🇳 INDIA❤❤❤thank you for your upload videos🙏🙏🙏

    @BalbirSingh-co3zb@BalbirSingh-co3zb Жыл бұрын

    • Colent use for grinding

      @faheemahmad6029@faheemahmad60295 ай бұрын

  • ENJOYED THAT LADS , WELL DONE!👍

    @stormytempest6521@stormytempest65219 ай бұрын

  • Amazing how they got that square with a 4 jaw chuck. That's some skill!!

    @derekb4731@derekb47312 ай бұрын

  • what machine is that for, this is huge

    @kamagateelhadji6340@kamagateelhadji6340 Жыл бұрын

  • Great stuff regardless of the so called professional comments.....good work guys

    @williamsara5565@williamsara5565 Жыл бұрын

  • You guys are amazing ! Great work of art !

    @lordbyron3603@lordbyron36035 ай бұрын

  • Brilliant n magical. When they turned the shaft around, suddenly, there were 2 key slots already machined off. So magical.

    @sangkapura@sangkapura Жыл бұрын

    • You’re being a little sarcastic here methinks!? Right tho! Amazing is an overstatement, but they do well when you consider the infrastructure and open air conditions! Cheers

      @nigelparker5886@nigelparker5886 Жыл бұрын

    • ​@@nigelparker5886 1

      @hasanza5636@hasanza5636 Жыл бұрын

    • @@atticuspip1481finding faults in videos and criticising them.

      @Rzai1989@Rzai19896 ай бұрын

  • At least these guys look like they take care of their equipment, most of the places are outdoors in the dirt and the equipment isn't taken care of very well.

    @Arclite100@Arclite100 Жыл бұрын

  • The keyway is automatically generated, which is awesome!

    @ottess@ottess Жыл бұрын

    • English is horrible!

      @richmilito5417@richmilito5417 Жыл бұрын

    • lol

      @NFlight@NFlight Жыл бұрын

    • Classified manufacturing process.😄

      @JusticeAlways@JusticeAlways8 ай бұрын

  • I could watch those lathes peel metal all day.

    @arwzqu1964@arwzqu1964Ай бұрын

  • Skills of man those are limitless

    @RBN181@RBN181 Жыл бұрын

  • Olá amigo!! Aonde será usado essa peça?????

    @BYLEOMACHADO@BYLEOMACHADO9 ай бұрын

  • Một trục kim loại to lớn có chất liệu thép rất cao, để tiện được thành sản phẩm giá trị cao, thật sự là một thách thức trí tuệ,qua biểu tượng nâng niêu của các bạn cuối cùng bóng sáng,cho thấy các bạn phân kim rất giỏi và rất thông minh, đó mới là trí tuệ ánh sáng, cảm ơn video chia sẻ của bạn rất hay và ý nghĩa, chúc các bạn sức khỏe hạnh phúc thành công.

    @user-tb8hz8qr1q@user-tb8hz8qr1q7 ай бұрын

  • I think this shop has the only Live Center in all of PK

    @thepubliceye@thepubliceye Жыл бұрын

    • Rolling dead center

      @350x85@350x85 Жыл бұрын

    • The joke is great.....thats my thing!

      @thomasb.3149@thomasb.3149 Жыл бұрын

    • It's dead.....see the end...welded in

      @christopherstephens3451@christopherstephens3451 Жыл бұрын

  • Salam to the hardworking Pakistanis, look the working place , no safety

    @saadatkhawajakhawaja9152@saadatkhawajakhawaja9152 Жыл бұрын

  • Mesmerizing ❤

    @gregpeterburs4155@gregpeterburs4155 Жыл бұрын

  • I am amazed that the lathe bearings handle the weight. Steel is amazing material.

    @cameronlilly4814@cameronlilly48144 ай бұрын

  • بسیار بسیار عالی جدآ لذت بردم با این ماشین تراش یک چنین شفت کشتی را درست میسازند کار یک ماشین پرفشار را با یک تراس قدیمی و معمولی .

    @alizareebrahimi2993@alizareebrahimi299311 ай бұрын

  • Amazing, good job

    @daniebinrad4516@daniebinrad451610 ай бұрын

  • I was waiting to see the slot milling!

    @1123pawel@1123pawel11 ай бұрын

  • Amazing what can be done ….quite scary

    @derekgee8504@derekgee8504 Жыл бұрын

  • exselente labor por favor graven todo el video el final en donde colocaron esa enorme pieza y para que muchas gracias muy profesional mi respecto

    @franciscojimenezpacheco6957@franciscojimenezpacheco6957 Жыл бұрын

    • Por lo regular esas enormes piezas son para la industria minera, o barcos, saludos cordiales atte Jesús Gómez torreón coahuila México

      @jesusgomez2006@jesusgomez200610 ай бұрын

  • They are making ROCKET'S CASING. .

    @laurolauron8278@laurolauron827811 ай бұрын

  • i have seen live centers made with the abilites and craftman ship why do you run without one

    @williamhoward8319@williamhoward8319 Жыл бұрын

  • Quanta produtividade!!!!....

    @joacirluiz4557@joacirluiz4557 Жыл бұрын

    • A FERRAMENTA COME BONITO O AÇO , É RELAXANTE DE SE VER

      @marcioroberto7423@marcioroberto7423 Жыл бұрын

  • I often would stack 1 inch carbide cutters when ruffing out pieces like these and spend the day on a grain shovel shoveling chips. Ahh, the good old days eh.

    @TomokosEnterprize@TomokosEnterprize5 ай бұрын

  • I bet Curtis would be impressed.

    @thepubliceye@thepubliceye Жыл бұрын

    • No…the boy would have used a collar around that to support it instead of using timbers

      @russellking9762@russellking976210 ай бұрын

  • Amazing skills

    @patilfamily7985@patilfamily7985 Жыл бұрын

  • I'm worried about the CHAIN to carry a15 ton of metal roller😱

    @danieldejesus6435@danieldejesus64359 ай бұрын

    • yeah, it doesnt look like the chain is large enough to carry such an immensely heavy object...it also depends on the grade the chain has, if it is grade 100 or 120 , of course it will hold much heavier objects than a ordinary grade 80 chain, but if i had to guess, the Indians dont get to use such high grade chains due to the cost, a grade 120 chain, is just much much more expensive than 80 grade....to be able to lift a 15 ton object, i think at least the chain dia should be more than 16mm , preferable 20mm or more...its hard to tell wht diam., chain theyre using here....

      @2011persol@2011persol9 ай бұрын

    • Scares me

      @davidlawrence8085@davidlawrence80855 ай бұрын

  • I would be interested in a video that starts from mining the rocks , raw material , to the finished product. That would be cool to see.

    @FirstLast-zk5ow@FirstLast-zk5ow Жыл бұрын

    • Raw. Material comes from russia china

      @GamingStarslegends01@GamingStarslegends01 Жыл бұрын

    • @@GamingStarslegends01 Do you know if there is a video that shows from the mining of the stones (raw material) to the finished product? It would be interesting to see from stone to steel (or whatever metal) product.

      @FirstLast-zk5ow@FirstLast-zk5ow Жыл бұрын

    • In this case and that goes for many steel products in Pakistan, it's mostly salvaged parts from oceangoing freighters/ cruiseschips etc. It says in the title something about a shaft from a ship so that would be the propellorshaft. So then you would have to back to the late '70's or the '80's to first see the ore being mined for this shaft, then being forged and hammered in (probably) a European shipyard and conclusively turned on an even bigger lathe then this😅. Then after 30/40 years sailing across the world the ship's a write off; gets beached on the Pakistani beach and scrapped. And there you have your shaft here in this movie...

      @ZerokillerOppel1@ZerokillerOppel110 ай бұрын

  • Where in this, is the piece of material, shown in the thumbnail? More clickbait.

    @kellyswoodyard@kellyswoodyard5 ай бұрын

  • How many days it tooks🤔🤔

    @rythikkumar3771@rythikkumar377110 ай бұрын

  • молодцы, будет турбина для южного потока,

    @user-si8bi6ns3o@user-si8bi6ns3o Жыл бұрын

  • I hope that they will install this shaft in the car and it will never break

    @mr_fao@mr_fao11 ай бұрын

    • "In a car"..... what kind of car is that??? An Abrams tank?

      @ZerokillerOppel1@ZerokillerOppel110 ай бұрын

  • جزاک اللہ

    @siddiquiaalaminetwork5396@siddiquiaalaminetwork53965 ай бұрын

  • Excelente work😉

    @ahmedmechanicoffical@ahmedmechanicoffical Жыл бұрын

    • Great workmen

      @philomenaenright7235@philomenaenright7235 Жыл бұрын

  • 작업복이 사고나기 딱 좋은 옷 입니다. 특히 선반 작업은 옷을 깔끔하게 입어야 합니다. 옷자락이 감기면 즉사 하기 때문이죠..

    @user-rn7xy5ib2b@user-rn7xy5ib2b10 ай бұрын

  • Got too love the high paying yellers, Their Job is too YELL

    @Hearttear738babyboy@Hearttear738babyboy6 ай бұрын

  • If I had such a gadget production factory, I would be rich from Elon Musk 😅

    @tommymachines@tommymachines Жыл бұрын

  • Excelente trabajo amigos saludos de Torreón Coahuila mexico 👍👍

    @rodrigomolina5475@rodrigomolina5475 Жыл бұрын

    • Hola Rodrigo que TAL amigo?

      @user-zx9on8oi8s@user-zx9on8oi8s Жыл бұрын

    • Pues dar un gran salud a todos Los amigos mexicanos, de Algeria,

      @user-zx9on8oi8s@user-zx9on8oi8s Жыл бұрын

  • How much cast would it be to refine such a huge saft?

    @RBN181@RBN181 Жыл бұрын

  • That job must have taken weeks to complete.

    @pixieflitwit1516@pixieflitwit15164 ай бұрын

  • good job

    @AbdulHafeez-cq6oo@AbdulHafeez-cq6oo11 ай бұрын

  • they must be very lucky that no accident has occurred it is very heavy, the axle should have had other bases and I should have taken safety measures

    @mpampiskara4995@mpampiskara49959 ай бұрын

  • Wonderful

    @RBN181@RBN181 Жыл бұрын

  • from where we can get these shaft?

    @prateikkhurpe218@prateikkhurpe218 Жыл бұрын

  • How many man hours would there be in that project

    @dennisobrien3949@dennisobrien394911 ай бұрын

  • by george you do have a live center

    @williamhoward8319@williamhoward8319 Жыл бұрын

  • 👍 machinists

    @RBN181@RBN181 Жыл бұрын

  • I love 💘 💗

    @Repoz42@Repoz42 Жыл бұрын

  • Did not see them cut key ways in

    @gazed1435@gazed14352 ай бұрын

  • Do you mean 15 Tons. Metric I suppose. Dictionary available ? Spell check on Computer ?

    @doctorbill6301@doctorbill63012 ай бұрын

  • I bet they make the shaft first and then the ship to fit it.

    @rickvaiBBB@rickvaiBBB Жыл бұрын

  • Show💯💯👏👏🇧🇷🇧🇷

    @pauloabreuabreu2096@pauloabreuabreu209610 ай бұрын

  • En dat allemaal op Engels machinebouw 😅😊🎉

    @corvavw6447@corvavw6447Ай бұрын

  • This day innovation and people “who now how to “ will prevail

    @tokomac7728@tokomac7728 Жыл бұрын

  • Kind of spoils the vid, showing the finished product first.

    @epamanonda1@epamanonda1 Жыл бұрын

  • BU PARÇA NE İÇİN YAPILDI,NE İŞE YARAR TÜRKİYE DEN SELAMLAR

    @suleymantombul1672@suleymantombul1672 Жыл бұрын

  • I hope they secured it before driving away!

    @catnip4885@catnip4885 Жыл бұрын

  • What was the total time for this piece to be finished it must of been a week

    @paulb7334@paulb7334 Жыл бұрын

    • Months would be my guess as it rusted a few times in the making, and we never seen the milling part.

      @thepubliceye@thepubliceye Жыл бұрын

    • @@thepubliceye I think that the roof is full of holes as you can see that it's probably raining inside, you can clearly see the water splash on the part.

      @kukipett@kukipett Жыл бұрын

  • Excellent,but I dont belive that shaft smooth due to the slag in the middle which is supported by means of woods.Again good job.

    @recepgumus21@recepgumus21 Жыл бұрын

  • I hope people watching this will understand the cost of the steel material alone that the shop owner has invested in this part. Plus many hours of labor to have it machined correctly. It only take one wrong cut by the machinist to make this into a huge piece of scrap metal. Then the shop owner has to replace the steel and start machine work over again. If this was a 15 ton part to start with in the US thats around $30k or more worth of steel. More if its an alloy. This looked like mild steel forging.

    @martinswiney2192@martinswiney219210 ай бұрын

  • это очень низкоуглеродистая сталь для чего он (вал) нужен? На месте газореза не прикалился!

    @user-fv9nv7es1k@user-fv9nv7es1k3 ай бұрын

  • Heavy and semi heavy engineering is now becoming very prevalent in Pakistan The great thing is that it is being driven primarily by the private sector

    @mohammadusman6525@mohammadusman6525 Жыл бұрын

  • Parabéns pelo trabalho; Quantos dias de usinagem foram necessários?

    @eumesmo0421@eumesmo0421 Жыл бұрын

    • PELO TAMANHO DA GIROMBA, NO MINIMO UMA SEMANA...

      @marcioroberto7423@marcioroberto7423 Жыл бұрын

  • As long as it looks good right...

    @CarsonMcInall@CarsonMcInall10 ай бұрын

  • Lesson in how to strip bolts!

    @chrisball3634@chrisball363411 ай бұрын

  • Pakistani zidabad❤❤

    @muhammadnadeemmughal9997@muhammadnadeemmughal9997 Жыл бұрын

  • BRASIL 👍👍👍

    @tadeulobo6404@tadeulobo64045 ай бұрын

  • not 1 pair of safety glasses in sight?????

    @droopydoo@droopydoo4 ай бұрын

  • Imagine doing all that then discover you are 1 tho out

    @GlenDoer-gq1rs@GlenDoer-gq1rs10 ай бұрын

  • Muy buen trabajo.para que es esa pieza.saludos de argentina

    @eduardoreales9122@eduardoreales9122 Жыл бұрын

  • No shortage of labor there.

    @backho12@backho12 Жыл бұрын

  • 😘😘👍👍

    @re-fix9678@re-fix9678 Жыл бұрын

    • Hi

      @pkmechanics@pkmechanics Жыл бұрын

  • Very good talent

    @rajakitchen2767@rajakitchen2767 Жыл бұрын

  • Техника безопасности, не не слышал)

    @Serg_krasnoyrsk@Serg_krasnoyrsk Жыл бұрын

  • Sorry boss I forgot I was holding the tape on one foot so i could be more,accurate.

    @warrior4christ777@warrior4christ7776 ай бұрын

  • Откуда они взяли такую болванку? Красивая штука получилась. А для чего она?

    @aky8420@aky8420 Жыл бұрын

    • Корабельный вал.

      @user-rd1xd7rh1w@user-rd1xd7rh1w Жыл бұрын

    • @@user-rd1xd7rh1w корабельный вал был, или его сделали?

      @aky8420@aky8420 Жыл бұрын

    • You are not allowed to call the shaft a SHE. You must refer to it as THEY.

      @taphhedrof1045@taphhedrof1045 Жыл бұрын

  • Where are the safety glasses! And what’s with the loose clothing? Jeez.

    @dougm2745@dougm274510 ай бұрын
KZhead