KZhead

Restoring Broken GoPro Hero 3+ a Subscriber Sent Me - Action Camera Restoration

Odd Tinkering
2021 ж. 11 Мау.
2 351 256 Рет қаралды
Жүктеу

Go to nordvpn.com/oddtinkering or use code oddtinkering to get a 2-year plan with a huge discount! This GoPro was sent to me to be restored and repaired by a subscriber who didn't have any use for it. The camera was released by GoPro on 2012.
The camera has some visual damage, the USB port is damaged and the lens has some scratches. When I tested it it wouldn't stay on but it would just keep turning on and off after few seconds. There is also some dust on the sensor which causes dark spots on the video and pictures.
The GoPro was disassembled. And I noticed one of the connectors had gone loose. Probably after falling or lot of vibration. After putting the connector back the camera worked normally. Now I could see what the image was like. There were some dots caused by dust particles on the sensor. I took the sensor off and cleaned it gently with a dry q-tip.
Next I repainted the front cover. I started with sanding and filling all dents with filler. Next it was coated with plastic primer to ensure teh paints stays on. I also remade the logo with a water transfer image that I printed out. Finally everything was clear coated to protect it further.
I polished the lens and LCD screen to remove scratches. Acrylic polishing compound was used for the screen and glass polish compound was used for the lens. I also used a special glass polishing pad because glass is very hard and polishing it by hand would take a long time.
Thank you for watching my video!
The bellow links to amazon are affiliate links. I get a small fee of anything you buy after clicking them, but you pay no more than without clicking. This is a great way to support my channel.
---------------------------------------------------------------------
Check out my Instagram: / odd.tinkering
T-Shirts: teespring.com/stores/odd-tink...
Support me on Patreon: / oddtinkering
SOME TOOLS FROM THIS PROJECT:
Electronic screw driver: amzn.to/3vd62Qs
Water transfer paper: amzn.to/2U62hQ9
Polishing compound (acrylic): amzn.to/3noC89E
Polishing compound (glass): amzn.to/3gew3L0
Glass polishing pad kit: amzn.to/3ghVRWz
Soldering station (with heat gun): amzn.to/3cue55u
USB port: www.ebay.com/itm/263158197314
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ kzhead.info/tools/f_s.html...
---------------------------------------------------------------------
Restoration playlist▶ • Tool restorations
---------------------------------------------------------------------

Пікірлер

  • Go to nordvpn.com/oddtinkering or use code oddtinkering to get a 2-year plan with a huge discount!

    @OddTinkering@OddTinkering2 жыл бұрын

    • Ok

      @MrMarshmelloBoi@MrMarshmelloBoi2 жыл бұрын

    • Sure

      @papaconmayo4642@papaconmayo46422 жыл бұрын

    • nordvpn screwdriver lol

      @3229dan@3229dan2 жыл бұрын

    • the link isnt working

      @failedxassassin1109@failedxassassin11092 жыл бұрын

    • it doesn't open to me

      @AntiIlluminati_GR@AntiIlluminati_GR2 жыл бұрын

  • Also props to Nordvpn for letting him do silent add. Respect.

    @seabasssouthflorida@seabasssouthflorida2 жыл бұрын

    • I respect it but wouldn't mind him talking for the ad either. Glad they gave him the option either way.

      @-Cetus-@-Cetus-2 жыл бұрын

    • Yeah it’s really cool that they respected his video style! Much better sponsor imo!

      @poephila@poephila2 жыл бұрын

    • Ok we've already got an ad from them in the video, don't need more in the comments.

      @beyondbackwater4933@beyondbackwater49332 жыл бұрын

    • That was the best nord VPN ad, I've ever seen. I kinda like it now hahahah

      @mafiazuka@mafiazuka2 жыл бұрын

    • now for RAID SHADOWLEGENDS

      @furydeath@furydeath2 жыл бұрын

  • Electronics engineering, mechanical engineer, physicist, chemist, electrical engineer and now he is also an artist

    @trijitsikdar7885@trijitsikdar78852 жыл бұрын

    • Also a biker

      @corry9413@corry94132 жыл бұрын

    • He was always an artist. His camera work and edits are cleeeean

      @TheFishySpartan@TheFishySpartan2 жыл бұрын

    • And a biker 😌

      @joannelucille@joannelucille2 жыл бұрын

    • Also a motovlogger

      @y.t.1320@y.t.13202 жыл бұрын

    • And a subway train driver

      @catwilandishguy5577@catwilandishguy55772 жыл бұрын

  • Dear everyone on youtube: This is how you do sponsorships. This is how you get people to watch the sponsorship section and not just immediately skip forward.

    @billwithers7457@billwithers74572 жыл бұрын

    • I skipped forward anyway. NordVPN was hacked and personal data revealed in the recent past. Sometimes no VPN is better for your privacy.

      @goku445@goku4452 жыл бұрын

    • Doesn't matter what is being sponsored I still skipped over it. Still annoying to have ads purposely placed in the video itself instead of them popping up on random spots in the video which you can skip after 5 seconds. Another sell out but great video anyway.

      @jsciarri@jsciarri2 жыл бұрын

    • Yes i watched that sponsorship but the others here are just being rude

      @spi-bro630@spi-bro6302 жыл бұрын

  • Just need a Ducktor mount for that bike (with accompanying tiny helmet, of course).

    @scrambledegg81@scrambledegg812 жыл бұрын

    • Haha brilliant 😄

      @RestoreTechnique@RestoreTechnique2 жыл бұрын

    • Of course 👍🏼👍🏼✌🏼✌🏼💙💙😄😅

      @thenoseknows9391@thenoseknows93912 жыл бұрын

    • That would be perfect :)

      @yuantheblue@yuantheblue2 жыл бұрын

  • We as the fans are patiently waiting for the day of when the Ps3 restoration video is released

    @bleachedvoid8823@bleachedvoid88232 жыл бұрын

    • Only if it's the 4USB fat version. So many incredible backwards-compatible systems going to waste that could be restored. :)

      @Dotherecy@Dotherecy2 жыл бұрын

    • @@Dotherecy i have 3 of them 😁

      @craigcooper75@craigcooper752 жыл бұрын

    • A fat 4USB PS3, with YLOD!

      @guilhermelopesfotografo@guilhermelopesfotografo2 жыл бұрын

    • @@guilhermelopesfotografo yea, the original 60GB

      @craigcooper75@craigcooper752 жыл бұрын

    • @@guilhermelopesfotografo hah! i have one with YLOD. And one with cut in trace on CPU

      @Maver1ck1987@Maver1ck19872 жыл бұрын

  • Finding out he has a motorcycle just makes me like this channel more. 🤘

    @brandoneverett3418@brandoneverett34182 жыл бұрын

    • Hopefully it’ll be the next thing restored 🤗

      @hsbravati1@hsbravati12 жыл бұрын

    • @@hsbravati1 I dunno, it sounds like it runs pretty dang good to me, and the little bit we see it looks like it's in good shape. I won't turn down a video of the chrome getting polished/buffed though.

      @brandoneverett3418@brandoneverett34182 жыл бұрын

    • @PRODUCTIONmYOWN Herr Direktör Agreed, can't beat that distinctive sound. 👌

      @brandoneverett3418@brandoneverett34182 жыл бұрын

    • Simp

      @marko6804@marko68042 жыл бұрын

    • @@marko6804 Bruh, do you hate bikes or something?

      @brandoneverett3418@brandoneverett34182 жыл бұрын

  • Note to most people: DO NOT clean an image sensor with a q-tip and alcohol unless you REALLY know what you're doing. For most image sensors you should use a lint-free microfiber flexible swab designed for cleaning image sensors and methanol instead of isopropyl alcohol. Otherwise you run a major risk of permanently damaging the sensor.

    @spost1986@spost19862 жыл бұрын

    • well, technically you cleaning an IR-filter, not the actual sensor, but yes, you are right, swab is must-have for this type of work!

      @user-uw9pv4hx9d@user-uw9pv4hx9d2 жыл бұрын

    • and he didn't blow out the inside of the lens before reinstall

      @k0dabeat117@k0dabeat1172 жыл бұрын

    • Yeah, I love these videos but I cringed at that...

      @rabonour@rabonour2 жыл бұрын

    • @@k0dabeat117 How do you know he didn't? If he videoed every single thing he did to a restore, it would take hours to watch it.

      @oregonwanderer@oregonwanderer Жыл бұрын

    • not relevant for this video though. he was not cleaning the sensor directly.

      @gazehound@gazehound Жыл бұрын

  • Polishing of the lens removes the anti-reflective coating, so it reduces image contrast and resolution. Scratched lens better to be replaced.

    @weaselgunsru@weaselgunsru2 жыл бұрын

    • i thought the same when i saw the lens reflex with no colors after polishment...

      @edsenos@edsenos2 жыл бұрын

    • And can create little distortions on the curvature creating problem with focus and blurring.

      @sergiofagundes1972@sergiofagundes19722 жыл бұрын

    • Came here to find this comment. Never ever polish a camera lens. They all have some kind of coating.

      @Cerus98@Cerus982 жыл бұрын

    • Image quality during the motorcycle ride is very bad. It confused me because I have a 1st gen Gopro and the image is better than that one. That's probably because he removed the coating, for sure. But great restoring nonetheless

      @guilherme94@guilherme942 жыл бұрын

    • obviously correct, but we are all here for the spirit of the game. An old GoPro isn't worth all that patience and expert effort anyway. There are plenty good used ones, but this is a restoration channel. And there is no human way to re-apply a correct factory-grade coating on a lens without proper industrial equipment. So degraded as it is, it works and it looks the part, which in a world of disposable equipment and planned obsolescence is worth commending.

      @sandrodunatov485@sandrodunatov4852 жыл бұрын

  • thanks for not spending 10 whole minutes sponsoring nordvpn and continuing to restore the camera while talking about the sponsor instead!

    @luigivoncheeseburgerjenkinsiv@luigivoncheeseburgerjenkinsiv2 жыл бұрын

    • Call me crazy, but I would prefer the complete ad break. That way I can just skip ahead in the video without having to hear or see it (the creator gets paid whether people watch it or not, so skipping it is a-okay). On this one I had to keep watching as a garbage service by a garbage company that can't secure servers properly was advertised to me. Not a great way to do it.

      @mjc0961@mjc09612 жыл бұрын

    • @@mjc0961 but he keeps restoring the object while advertising the product, you could just watch him do it and ignore the text that advertises nordvpn

      @luigivoncheeseburgerjenkinsiv@luigivoncheeseburgerjenkinsiv2 жыл бұрын

    • @@luigivoncheeseburgerjenkinsiv it distracts the attention. Better to have a separate3 add that my AdBlock can skip. They know it so they now force feed us with this garbage text over video. Also fick NordVPN, they were hacked and tried to keep it quiet. Secure my ass.

      @mmdirtyworkz@mmdirtyworkz2 жыл бұрын

    • with this argument it's impossible not to call you crazy

      @luigivoncheeseburgerjenkinsiv@luigivoncheeseburgerjenkinsiv2 жыл бұрын

    • @@luigivoncheeseburgerjenkinsiv keep watching the adds mate, not sure who's crazy here :)

      @mmdirtyworkz@mmdirtyworkz2 жыл бұрын

  • 20:06 The Ducktor is impressed by the improvement of the shot quality.

    @hdezn26@hdezn262 жыл бұрын

    • Thanks for the Heart!

      @hdezn26@hdezn262 жыл бұрын

    • Ducktor is pogging

      @Sy_h@Sy_h2 жыл бұрын

    • Lmfao

      @Bellablixks@Bellablixks2 жыл бұрын

  • New models of action cameras like DJI's action 2 is worth considering than restoring old ones.

    @josephsowell490@josephsowell4902 жыл бұрын

  • Great my friend! This is a masterpiece. Congratulation from Vietnam.😉👍🍺

    @MetalRestorationBho@MetalRestorationBho2 жыл бұрын

    • H a m p t e r

      @epicwwiistuff6863@epicwwiistuff68632 жыл бұрын

    • @@epicwwiistuff6863 N O W A I T I T S A T R A P-

      @gregoryderpwrld111@gregoryderpwrld1112 жыл бұрын

    • @@gregoryderpwrld111 😳😳😳 toto motim esopofgo tinaof motoim anisotim opainso loadisk sidsak modula diadcikd paoils eojcxn siwuq

      @epicwwiistuff6863@epicwwiistuff68632 жыл бұрын

    • Nani

      @theomelettecuber5458@theomelettecuber54582 жыл бұрын

    • @@epicwwiistuff6863 OH GOD THEY HAVE SPIES.

      @gregoryderpwrld111@gregoryderpwrld1112 жыл бұрын

  • I never thought I'd see a gopro this beat up in my life.

    @Crow3893@Crow38932 жыл бұрын

    • Is it one of those Demolition Ranch Go Pro's?

      @hdezn26@hdezn262 жыл бұрын

    • @@hdezn26 or from That's Ridiculous...

      @TheDirge69@TheDirge692 жыл бұрын

    • @@TheDirge69 Could be...

      @hdezn26@hdezn262 жыл бұрын

    • Ive seen worse

      @HistoryandReviews@HistoryandReviews2 жыл бұрын

    • You haven't seen a lot of gopros have you? 😂

      @rasalghul3533@rasalghul35332 жыл бұрын

  • 1:44 the best sponsorship i've ever seen and please make more electronic restorations

    @jeodezman32@jeodezman322 жыл бұрын

    • Ducktor face is censored

      @Goodtimes2021@Goodtimes20212 жыл бұрын

  • What I've learned from your channel is despite the fact consumer goods do everything in their power to convince you to throw them away and try to stop you from repairing them, a little bit of patience can fix a lot more than I'd think.

    @ItsHyomoto@ItsHyomoto2 жыл бұрын

  • Dude's giving us more and more lore of himself. Now we see he has a motorcycle.

    @cottoneyejoe8285@cottoneyejoe82852 жыл бұрын

  • I'm sure there's not much call for it but with your skill, I'd love to see a restoration of a vintage antique sewing machine, a White, Domestic, Kenmore or any of the White rotary clones. Love the Ducktor! Thank you for your videos, they are awesome!

    @labrat8876@labrat88762 жыл бұрын

    • Errsddadf nn,h

      @stst8775@stst87752 жыл бұрын

  • I’ve watched many of his videos. I’d say I’ve learned the most from this one. Love learning new things and you do it all while never saying a word. Brilliant.

    @brandonj6874@brandonj68742 жыл бұрын

  • It's so satisfying to watch you take something that many would throw away and bring it back to life. Not only that, but make it look new again. Thank you for your video's. They are both therapeutic and educational.

    @Addicted2Kaos@Addicted2Kaos2 жыл бұрын

  • Will just get a new one than repairing a broken action cam, cost almost the same. DJI action 2 for the win.

    @doodieman4009@doodieman40092 жыл бұрын

  • I‘ve probably seen every video of you so far, they’re so calming and satisfying. Great job, als always!

    @madm3rt989@madm3rt9892 жыл бұрын

  • The "talk free" ads are a nice touch. I immediately started fast-forwarding when I saw the "NORD VPN", realized that I had missed an important part of the disassembly, did a little rewind, and now I know about NORD VPN. Very clever ad read, Mr. Tinkering Man. 🤓

    @richardhenry5858@richardhenry58582 жыл бұрын

  • Congratulations on making a midroll ad that doesn't need skipping. Genius.

    @ghostything@ghostything2 жыл бұрын

  • For real, is there anything this guy CAN'T do?? These videos are amazing.

    @moonlightrising@moonlightrising2 жыл бұрын

    • Fix a vacuum with a shot motor?

      @FrenchFryCheese04@FrenchFryCheese0410 ай бұрын

    • @@FrenchFryCheese04 I honestly wouldn't be surprised if he could somehow fix even that

      @moonlightrising@moonlightrising10 ай бұрын

  • It's amazing to see how the inside looks way simpler than I thought. I was expecting some witch craft or something. 😂 Crazy to think that they have gone all the way up to 9 with Gopros.

    @madcat4563@madcat45632 жыл бұрын

    • I remember when the hero 3 was new

      @ethannorton564@ethannorton5642 жыл бұрын

    • Funny how education and learning dispel the mystery.... In my case it always leaves the 'wonder' and the 'wow' factor in place though. :) LOVE watching these types of videos even though I have little experience w/hardware myself. (I program as a hobby :D )

      @AsmodeusMictian@AsmodeusMictian2 жыл бұрын

    • The development of microelectronics is an amazing story, but I'm more in awe of the "gadgets" before microchips, like those old timey cash registers and such that get restored. Just can't keep from wondering, how did they design such intricate stuff?

      @jjryan1352@jjryan13522 жыл бұрын

  • I miss the Ducktor’s beak

    @taylorqueensbury170@taylorqueensbury1702 жыл бұрын

  • Hi. What about the ar coating on the lens? When polishing it, it went away. And it's there for a reason. At night the reflections on the lens surface make the image blurry. I dont mean to critizise, its just a thought. Regards

    @ricardocea4957@ricardocea49572 жыл бұрын

    • Do you know if you can replace that coating?

      @RestoreTechnique@RestoreTechnique2 жыл бұрын

    • @@ricardocea4957 Isn't Odd Tinkering in Finland?

      @Chaos89P@Chaos89P2 жыл бұрын

  • I love the idea of odd tinkering's motorcycle gloves being identical to the gloves he uses during a restoration.

    @johannesaylott@johannesaylott2 жыл бұрын

  • Now THIS is how you do sponsorship advertisements on a video!

    @boingokky@boingokky2 жыл бұрын

    • Idk, Internet Historians Nord VPN ads are pretty hilarious.

      @GeminiWoods@GeminiWoods2 жыл бұрын

  • hahaha that was an LTT level of sponsor transition

    @lacucaracha111111@lacucaracha1111112 жыл бұрын

    • That's Private Internet Access or PIA

      @abdulmuhaimin5274@abdulmuhaimin52742 жыл бұрын

    • It really was an LTT level Segway ngl

      @dawsonramdass1145@dawsonramdass11452 жыл бұрын

  • Appreciate the talk free content as well as watching your mind in action! Always impressive to watch. Thank you.

    @zestygurl@zestygurl2 жыл бұрын

  • I binge watch your vidoes. Always enjoy seeing the work that you put into a restoration. You are really good at incorporating sponsorships into the videos. It is much better than cutting away to watch someone go on about something you can tell they never use.

    @kathy3178@kathy31782 жыл бұрын

  • I’m not sure but I’ve heard the Ducktor is a quack.

    @BozowolfnHD@BozowolfnHD2 жыл бұрын

  • i love how much you care for *details*

    @customrestoration5317@customrestoration53172 жыл бұрын

  • I am just patiently waiting on the DS restoration and finally be able to fix the touch screen (if possible). Great Vid as always!

    @damianramos327@damianramos3272 жыл бұрын

  • Out of so many videos I've seen on KZhead with sponsors, this is by far the smartest way to highlight sponsors on the video

    @dysfunctionalisme@dysfunctionalisme2 жыл бұрын

  • Always good to see Herr Ducktor

    @Drowronin@Drowronin2 жыл бұрын

  • I love these vids, restoration is so satisfying :)

    @projecteer4498@projecteer44982 жыл бұрын

  • Helpful hint with waterslide decals. A few drops of Microsol under the decal to make it look like it was painted on (it's a mild solvent that melts the decal slightly onto the surface so ridges and seams don't cause bubbles or silvering), and then clear coat over it after it is completely dry

    @marckyle5895@marckyle58952 жыл бұрын

  • Me: No way he can restore this Tinkering: Hold my tools

    @CarsRestored@CarsRestored2 жыл бұрын

    • little correction: OddThinking: *hold my Isopropyl alcohol*

      @ijnmutsuki7031@ijnmutsuki70312 жыл бұрын

    • @@ijnmutsuki7031 kills camera lens and sensor, so it stars to produce bad image and to protect yourself says "it's a small camera from old time, don't expect it to work good", but we all know a reality, the gopro gives very same result even on new products.

      @user-uw9pv4hx9d@user-uw9pv4hx9d2 жыл бұрын

  • Ad integration is great. Brief and appropriate. I like it.

    @alex_chubanoff@alex_chubanoff2 жыл бұрын

  • I'm a simple man, I see The Ducktor, I upvote.

    @daviddryden7668@daviddryden76682 жыл бұрын

  • This man is a damn genius. And pure joy to watch.

    @pjs299@pjs2992 жыл бұрын

  • Your attention to detail is something, thanks for the videos. I enjoy them very much!

    @raemcmahon8216@raemcmahon82162 жыл бұрын

  • 16:25 For a second I thought that was the actual battery 👀

    @bunnybird12@bunnybird122 жыл бұрын

  • i liked how you didn't break from the normal ASMR video format for the sponsor spot

    @GaudyMarko@GaudyMarko2 жыл бұрын

  • Ah yes, I remember the days of the older GoPros. My brother in law had a couple of the Hero 3 and 4s he took to Afghanistan when he was fighting in the war. Didn't see much combat with the video footage he got, but was very interesting how things went on over there.

    @MarkMeadows90@MarkMeadows902 жыл бұрын

  • All restoration process seems so simple and smooth. You are the best

    @EleonoraSpizzamiglio@EleonoraSpizzamiglio2 жыл бұрын

  • Restorations and motorcycles. Heck yeah!

    @ozandis127@ozandis1272 жыл бұрын

    • Restoration on the motorcycle? Yass! (Future Video?)

      @hdezn26@hdezn262 жыл бұрын

  • i love hows he's smart enough to put the sponsorship along with the dismantling, so we can't actually skip it

    @arafe.1012@arafe.10122 жыл бұрын

    • What are you talking about I still skipped right over it lol

      @jsciarri@jsciarri2 жыл бұрын

  • I've always wondered, how much time do these projects really take from start to finish? Love the vids 👊

    @leadergames0661@leadergames06612 жыл бұрын

  • Absolutely fascinating to watch you have a proper steady hand and you are clever in the things that you have restored

    @Tr4c13@Tr4c132 жыл бұрын

  • If I sent to you my 2DS which has one of the screen oversaturated (probably a problem of the inside board) could you repair it and send it back to me? I'm a big fan I'd love to get it repaired from you 💕

    @TheSilentGecko7@TheSilentGecko72 жыл бұрын

    • I know of an NTSC GameCube that needs a little work done, too. Apparently it cuts on and off repeatedly, and the disc reader isn't working in some manner. Former may just be because of dirt.

      @Chaos89P@Chaos89P2 жыл бұрын

  • Is there anything this man is not capable of?!? He is a do it all master…

    @Trickgliding@Trickgliding2 жыл бұрын

  • Your no talk ad as you continued working in the video was literally the best ad inclusion I’ve ever scene from a youtuber. I REALLY hope others take a page from your book and do similarly cuz wow was a surprised to not be even kind of annoyed by an add and it fit your video style so well!

    @Tototoron@Tototoron2 жыл бұрын

  • Hi! NICE WORK!!! So clean and perfect. There is no other Word to describe this, its just perfect. Congratulations and greetings from a Venezuelan in Argentina.

    @elgrupogamer9352@elgrupogamer93522 жыл бұрын

  • 0:37 YEET

    @3229dan@3229dan2 жыл бұрын

  • 🇧🇷 Toda vez que assisto vídeos desse canal, fico totalmente satisfeito.

    @rapha_risi@rapha_risi2 жыл бұрын

  • That silent ad is brilliant for not ruining the vibe. Ngl nordvpn is nice, i use it myself mainly for netflix and the speed and connection is more stable than using free vpn. Also the speed loss its just a little

    @garinramadhan6572@garinramadhan65722 жыл бұрын

  • Great to see how far your channel has come. Congrats on almost 2 million subs!

    @id10t44@id10t442 жыл бұрын

  • I’m thinking of sending you my broken Wii U because it’s disc reader is broken and it won’t turn on anymore, I consider this an easier challenge for you if I do send it

    @issieplayzzz361@issieplayzzz3612 жыл бұрын

  • Do you have a supply of NZT? lol... I have to draw out on paper and assembly matrix. I don't see how you can keep track of everything. Awesome job!!!

    @troyna77@troyna772 жыл бұрын

  • That was really cool, as your videos usually are! I don't think there's anything that you and Ducktor can't restore. Thanks so much for another awesome video brother. Be well, stay safe and God bless. Rev. D.

    @Rev-D1963@Rev-D19632 жыл бұрын

  • I swear this guy just got into my recommendations and now I'm here, subscribed and can't stop watching

    @skywing626@skywing6262 жыл бұрын

  • These video such a satisfying to watch

    @xxredchanxx@xxredchanxx2 жыл бұрын

  • Fun Fact: About 9 years ago, GoPro gave away a GoPro daily, plus all the accessories. People won from all over the world, and the winners posted pictures of the box full of 'goodies'. Sadly, the daily give-away ended. Since you restored a GoPro, someone should send you an MP3 Player. i.e. Sony 20:24 Place a strip of rubber from an old inner tube inside the bracket, to keep the camera from rotating back or forward on the handlebar.

    @alansmith4734@alansmith47342 жыл бұрын

    • It will also prevent the bracket from scratching up your handlebars

      @rawr51919@rawr519192 жыл бұрын

  • I was so excited to see a new video from you! Keep up the great work! 😊

    @debbiespring6653@debbiespring66532 жыл бұрын

  • Really love the video, the final was epic. Thanks for sharing.

    @JSL1986@JSL19862 жыл бұрын

  • Eu amo seus vídeos, cara!

    @impavidvs_@impavidvs_2 жыл бұрын

  • Ahhh, a new video. You make my day. Thx

    @MT-od7mc@MT-od7mc2 жыл бұрын

    • Damn, i am early ^^° pssst, this is the best thing on a Saturday night :-)

      @MT-od7mc@MT-od7mc2 жыл бұрын

    • @@MT-od7mc Wachi wachi wa

      @papaconmayo4642@papaconmayo46422 жыл бұрын

  • Thanks to youtube for showing me your channel, I like a lot your job, thank you for creating and sharing!

    @maxigalera@maxigalera2 жыл бұрын

  • Great job. Fascinating to watch. Thank you. Your project and video are appreciated.

    @GeorgeWMays@GeorgeWMays2 жыл бұрын

  • Give this man some dinosaur bones, the next day his house will become Jurassic Park

    @johntheanimator4317@johntheanimator43172 жыл бұрын

    • R u john walker fan

      @kid_girl_lover@kid_girl_lover2 жыл бұрын

  • I was literally about to pull up one of your videos to enjoy with my lunch and I got the memo

    @thomasmurrell9832@thomasmurrell98322 жыл бұрын

  • Watching your videos has got me doing little restorations myself. Nothing massive; just a cleanup and removing corrosion from a Wii. Works perfectly now because I followed some of your videos to help.

    @RJFawlkes@RJFawlkes2 жыл бұрын

  • I like how well lit up your projects are.

    @expressionoffreedom7165@expressionoffreedom71652 жыл бұрын

    • I've worked in a lot of dark places and it always sucks trying to see what's going on with shadows everywhere. Your videos reminded me how I used to be obsessed with how well things were lit up.

      @expressionoffreedom7165@expressionoffreedom71652 жыл бұрын

  • Odd Tinkering is always 1st. Change my mind😎👍👍👍👍👍👍👍👍👍👍👍👍👍

    @josueveguilla9069@josueveguilla90692 жыл бұрын

    • No need to change your mind, This one thinks.

      @hdezn26@hdezn262 жыл бұрын

    • @@hdezn26 Thank you.

      @josueveguilla9069@josueveguilla90692 жыл бұрын

    • @@josueveguilla9069 Your welcome.

      @hdezn26@hdezn262 жыл бұрын

  • Regular people: “oh this water slide skill seems pretty cool! I wonder when I’ll use it though?” Model makers: “….pathetic….” This is me making a funny, I think he did a very good job with the actual self-made water slide decals

    @PrayingLotus@PrayingLotus2 жыл бұрын

  • Love this channel! A true craftsman! Keep up to good work!

    @zdavzdav86@zdavzdav862 жыл бұрын

  • Beautiful restoration, and a real treat to get a glimpse of Finland!

    @stevejohnson1685@stevejohnson16852 жыл бұрын

  • i need to learn how to do this kind of stuff and restore my gameboy advance sp

    @javi_el_sucio@javi_el_sucio2 жыл бұрын

    • The gameboy adv. sp is relatively easy to restore. What's wrong with it?

      @odd_ish5347@odd_ish53472 жыл бұрын

    • @@odd_ish5347 the screen have bubbles in it maybe the Polarizer some scratches and few hits of the shell also yellowing and some clean too :)

      @javi_el_sucio@javi_el_sucio2 жыл бұрын

    • @@javi_el_sucio you could order a new shell & polarizer from Aliexpress. They have everything you want and for a reasonable price ;) Changing the shell isn't hard, just watch a tutorial :)

      @odd_ish5347@odd_ish53472 жыл бұрын

  • Wow, peaple say go pro's are so difficult to repair but you did it!! 👍

    @Move-productions@Move-productions2 жыл бұрын

    • The newer ones are more difficult to repair than the older ones. They made them harder to take apart without damaging them....

      @hdezn26@hdezn262 жыл бұрын

  • Ive been watching an American bloke’s channel who seems to be an imitator of yours. He lacks your finesse, and he doesn’t have captions. You’re the king!

    @DaisyHollowBooks@DaisyHollowBooks2 жыл бұрын

  • Very neat to see some of the tools I use frequently for hobby models used in this restoration. Just goes to show you never know what can come in handy!

    @akiwuff2779@akiwuff27792 жыл бұрын

  • Can you please link the clear coating you used for the water transfer paper? Thanks in advance

    @HappiSabi@HappiSabi2 жыл бұрын

  • Subscriber: I challenge you to fix my broken Go Pro. Odd Tinkering: Challenge accepted.

    @williamwest4049@williamwest40492 жыл бұрын

  • Putting the battery in the camera at the start looked so satisfying

    @DavidWarrior360@DavidWarrior3602 ай бұрын

  • WOW. You sir are a MASTER. Great job, as always.

    @ericbrooks1562@ericbrooks15622 жыл бұрын

  • I believe there is a coating on the lens that went away with polishing. You would be better off with a new lens if the cost is normal.

    @spu77@spu772 жыл бұрын

    • correct, there's an anti-glare coating on the lens which is removed with polishing.

      @SatchDoesThings@SatchDoesThings2 жыл бұрын

  • You’re a freaking real life MacGyver.

    @stefangla6878@stefangla68782 жыл бұрын

  • Insane amount of work, great job!

    @mota7506@mota75062 жыл бұрын

  • Your videos really helped me fall asleep, thank you so much!

    @5101Yessi@5101Yessi2 жыл бұрын

  • "The previous owner should have used some protection" oh.. no..

    @koaya730@koaya7302 жыл бұрын

  • I’m thinking at the moment: does Da Vinci reincarnated and got a new job as restoring expert?

    @vlaskz@vlaskz2 жыл бұрын

  • Mad props to you for doing sponsored content without interrupting the rest of the video’s content, awesome video as always

    @DARWIN1FY@DARWIN1FY2 жыл бұрын

  • Great effort my friend!You are so patience!

    @mdrc3288@mdrc32882 жыл бұрын

  • Doesn't polishing the lens like this, remove all the optical coating?

    @GREQ@GREQ2 жыл бұрын

    • I think so. Is there a way to replace the optical coating?

      @hdezn26@hdezn262 жыл бұрын

    • I think for a low cost/quick fix, it is what it is-that is if you already have glass polish and the tools. I don't think a replacement lens is really that expensive

      @nooaiden@nooaiden2 жыл бұрын

    • Yes, it does. I suspect the scratches were only in this coating (anti-reflective coating or AR) which made it fairly easy to polish out. Scratches in the actual glass would be harder to deal with. Without this coating, the images won't be as nice as they would be with it but this way you get a usable image without the scratch artifacts. A nice restoration of a very ruggedly-used GoPro.

      @pfadiva@pfadiva2 жыл бұрын

    • @@ricardocea4957 Ok, ill have to look into that. (for future reference)

      @hdezn26@hdezn262 жыл бұрын

  • I like how you included the sponsor in the actual video and it was not some boring unrelated segment no one wants to see. Kudos!

    @liorzisman2968@liorzisman29682 жыл бұрын

    • Nice automated comment that's obviously fake. Nobody wants or cares about Nord VPN.

      @jsciarri@jsciarri2 жыл бұрын

  • Hey OT This was pretty amazing. Thank you for sharing. Take care

    @Tim-57@Tim-572 жыл бұрын
KZhead