The Process of Japan's Best Master Knife Sharpener! 包丁を研ぐプロセス 研師 野村祥太郎 伝統工芸士 堺打刃物 Blacksmith
2023 ж. 22 Там.
995 838 Рет қаралды
Japan's Best Master Knife Sharpener: Shotaro Nomura ("野村祥太郎"）
- Related video -
Korean Knife Sharpening Blacksmith. Old Japanese Knife Restoration
• Korean Knife Sharpenin...
How to Sharpen a Knife with a Japanese Master Sharpener
• How to Sharpen a Knife...
Process of Making Japanese Knife - Beautiful Blacksmith & Samurai Sword Master 日本刀 包丁の作り方 平田鍛刀場 부엌칼
• Process of Making Japa...
Process of Making Japanese Knife - Samurai Sword Master - 和包丁の作り方 Katana 日本刀 大阪 堺 水野鍛錬所
• Process of Making Japa...
[Infiltration] Sakai Knife｜Shotaro Nomura [Japan's number one sharpener]
• 【潜入】堺包丁の昔と今｜野村祥太郎【研ぎ師】...
#TheProcess #プロセス #メイキング#ザメイキング #TheMaking #process
I've been sharpening knives for nearly 50 years. And I thought I was good. Think again Steve. I'm speechless after watching this video. Hats off to this professional craftsman.
I am not even sure of what he is doing in some steps
10 лет, это космос!
If u didn`t learn to sharpen a knife in 50 years it might be a skill issue Steve.
Завжди знайдеться хтось - кращий
@@SouthGlass "Sharpening" in the western sense is right at the end. For the rest of the video he's basically doing what a blacksmith/knife maker does. Calling him a 'sharpener' is almost insulting because he's so much more than that.
Awesome skills this man has picked up from a amazing master ! Beautiful work thank you .
Пусть сохранятся все традиции и ремесла. Здоровья мастеру и сил в работе ❤❤❤
was ??????????????
@@prytosan😂😂😂😂😂
@@prytosan Из дас
Jestem w szoku😱, wydaje się, że te noże nigdy się nie stępią.
北マケドニアからの多大なる敬意、私は日本のナイフとそこのナイフ産業が大好きです
These skills should be respected more than what they are
He got a medal from the Emperor.....
@@davegrier523MOAR RESPEK
agreed. I didn't had the patience to finish watching 😅
These skills are appreciated in Japan but in the West there is no longer any respect for traditional craft.
@@temhawpin --- Oh, I think westerners who know what they are doing with their alloys probably have a deep respect and appreciation for the craftsmen who can maybe sometimes get better results. A lot of consumers may buy those hand crafted artisan knives for the romance of it alone. The usefulness of any knife is determined by the owner's ability to keep it sharp.
I find it amazing to watch Japanese craftsmen at work. They thrive for absolute perfection in everything they do. This is especially demonstrated by bladesmiths and polishers.❤
It is amazing to watch. Today advances in metallurgy kind of destroy that romance of knowing which iron sands are best, the 34 hours or so of smelting, the hand bellows and the color of the steel in forging, rice straw, two helpers with sledge hammers shaping folded steel into the blade shape, the plunge into water to let the blade curve ... and all. Today, it's powdered steel alloys in precision mixes, computer controlled temperatures, mechanical presses, diamond whetstones, jigs.
@@davesmith5656 they are all just tools, only a true master that knows his craft and has the propper knowlege can use the computers and control the processes to bring out a metals full potential, or knowing how exactly to temper each piece or batch of metals is key too depending on what you want the metal to be or what you need it to do, all the finest sharpeners wont do you anygood if you dont know what you are doing with it, or have the willingness and fortitude to spend the time on the knife or edge to make it the best it can be, the japanese take even the most mundain thing and make a zen art out of it, or put that much effort into a craft, for most sharpening I venture to say will be good enough for most , but is just the mid point or middle of the task for a sword or master sharpener in the japanese tradition remember its called sword polishing for a reason, and the time stroping and honeing have additional benefits, and the type of edge you put on it, the secondary bevel, all contribute to the performace of the edge like is it convex straight or concave for the edge or hollow if you will, just ask murry carter the only known westerner to be a named master japanese bladesmith and also have the american bladsmith society master certification, at least last I checked, and go ask him about sharpening and how he feels about diamond sharpeners or how he goes about sharpening and polishing cutlery.
They thrive for something beyond perfection. I can't describe it but you feel it when you watch the video.
일본 어디로가면 노무라쇼타로를 만날 수 있을까요.
Grande Mestre. Longa vida para continuar a nos inspirar. Uma saudação de Portugal.
A lifetime of knowledge and expertise, amazing 👍
惚れ惚れする技術と技。長い年月の研鑽から生まれた技ですね。素晴らしいです。
Wow….respect to this skillful gentleman 👍💪🏼🙏🏆🫶🏼
Такая работа требует большого опыта и верной руки. Большой мастер!
Хуястер. Эта работа выполняется на нормальном заточном станке с электронным угломером и набором алмазов на гальванике. И результат будет сильно лучше, чем на глаз. Что он делает это просто дрочилово в дань традициям.
И на глаз смотрит - попал он в угол или нет. Умора просто.
@@JohnDoe_777ну там аппарат не заводской, думаю и с ним можно на угол не выйти
increible trabajo y dedicacion,saludos y un abrazo
Awesome skills!
Love the passion to his craft ❤
Wow totally amazing skills
Felicitaciones! Gran trabajo de afiliado!
That was truly special to watch. Man, would I love to have one of those knives handed to me with his own hand in his shop.
Japanese have a mania for sharp objects 🤔🙂
Parabéns que lindo trabalho!
Mucho cuento
A incrível maestria do japonês é sempre impressionante, que viva muitos anos antes dos deuses solicitarem seus serviços.
美作品
Parabens, tenho muita admiração pelo seu trabalho!
He is an artist! Must be respected!
Much respect. Amazing.
Почитал комментарии и офигел,люди которые скорей всего ни одного ножа, своими руками не сделали - пишут в комментария такую фигню.обхаяли человека который всю жизнь этим занимается - он явно мастер своего дела!!! писари - мастера околовсяческих наук))))
Precioso trabajo. Cuanto cuesta esos cuchillos?
Molto bravo, la mano del maestro è ferma e precisa. 🙏 Greetings from Italy
A true master at work...
Beautiful!
Здоровья дедушке
Hermoso trabajo,todo un maestro,me hace acordar a desafío sobre fuego 🚒.
this is just amazing.
Amazing.
Excellent travail 👌
Интересно бы увидеть результат с микрометром. Когда новичку дают точную неведомую фигню - он старается, но не факт что результат будет. Когда неновичок ежедневно делает одну и ту же работу каждый день - у него появляется повторяемый результат на неточной ведомой фигне. Биение страшное, камень тяжёлый, но мастер, кажется, уверен и понимает что делает
I would kill to spend a day in this man’s shop… what a master of his craft, I bet I can learn so much about metallurgy from him, I make straight razors so I know a lot of what he’s doing but still there was plenty I didn’t
he just sharpens the knifes, he ist not an Metallurge, suicide isn't necessary.
There's a lot of conflicting data such as the heat tests done by Australian Knife Grinders (AKG) on a Tormek that would show too much heat when sparks come off a dry wheel, ruining the heat treat. This video here can't show and tell everything in 20 minutes, but I wonder what the heat treat is on those knives, and how holding one on a dry wheel for even a second without water cooling does not heat it up. Maybe the whetstone sharpening whets away any softened steel? Maybe the AKG guys have different steels? Different wheel speeds? They use heat-sensitive paint, and show that it's very easy to exceed tempering temperatures, even if it is "only" the fractions of millimeters at the very apex. Which processes / data are correct??
@@xxxvvv9172 --- Good humor!! "Wow! I bought [one of these], and it's really SHARP!!" So many western world consumers say that. With just a little proficiency, under 200 BESS is easy. It gets a little trickier to get it into the 50 to 80 range. I'm going to toot my own horn here, and anyone can disbelieve: Wusthof is proud of their PE-tek 120 edges; I got mine to test 80. That's after 3 years of whetstones. I'm not 100% sure I know what I did, or can do it again, but I'm getting close. I have no ambitions at all to get into actually even understanding the steel, let alone smelting and forging.
When it comes to sharp objects, no one can beat Japanese.
เยี่ยมมากครับ
Nobody appreciates skill such as this master possesses😢except thosr who directly benefit
Niewiarygodne rzemiosło, perfekcja. Pozdrawiam.
He knows how to set the right angel when sharpening.
un grande vero artista complimenti
amazing
wow, amazing
Better than new 🙊
Most Japanese swords are very precise and well made, as well as being strong, hard and very durable. 🔥🔥🔥
The man is a Wizard !!! ☘
Amazing. I’m curious as to what material are those wheels made from. It’s also nice how he use a rough wood wheel with some kind of powder to “strop” and give the final shine.
Mestre das artes
Los japoneses son lo máximo
Saygi deger ustam hangi bicak bileme makinasi önerisiniz
Impresionante
I´m very very proud to own an old unused Shotaro Nomura Sakimaru knife. It´s an amazing work.
que buen arte ojala y perdure siempre
Trabalho magnífico
I think I would call this blade edge grinding/shaping & sharpening? He's not just starting with worn, dull knives, he seems to be starting with rough knife blanks here
Between the craftsmen involved in making of this knife, there must be 150+ years of experience I bet.
It is interesting that all the wheels are rotating opposite from what we do in USA! They rotate up from the bottom and away. Just as Japanese saws are pulled rather than push as we do in the USA, What have they learned in those thousand years of being Master Craftsmen? The large wheels allow the blades to be placed at the top and then you can see underneath far easier. The blades would be easier to control from that position and he uses a backer board to secure them while grinding.. Wonderful video, thanks.😍
I agree except some idiot in the US would let the blade slip and fly into an attorney.
I'm surprised he's got all his fingers!
Це неймовірно! Насолода для очей спостерігати за такою майстерною роботою! Шедеврально, дивовижно!!!
спасибо ! Порядок как у всех ! 😊 берегите лёгкие , гриндер промышленный: - крутой.
That's not just sharpening. He's profiling from a blank he almost certainly forged himself. This man is a knifemaker, an exeptional one.
Nomura-san doesn't do his own forging. The blades he sharpens are forged by some of the absolute best in Japan though. Yanaka-san is a frequent collaborator on the forging side. Master/Awarded sharpeners for cutlery include the profiling process in their normal skillset. Not all do it, of course.
одним ударом меча,самурай перерубал лошадь поперёк,так что она этого не замечала и продолжала скакать еще 66 метров.
Просто продолжала скакать и умирала своей смертью😆
I am making my first gyuto, I have so many questions I wish I could ask him!
素晴らしい職人の動画なのに、何故日本人からのコメントがないのか不思議です
タイトルに日本一って付けなければ日本人からのコメントも増えたでしょうね。
A resposta é simples porquê os japoneses não o consideram o melhor tem outros de mesmo nível que ele .
Es mágico verlo trabajar, muchas gracias.
У мастера золотые руки.
How he didn't get wrapped around that stone yet is beyond me
Многолетний опыт и трудолюбие. Так можно достигнуть вершины горы. :D
😎 🤺 sure makes it look easy..lol
10:54 that paper sharp-test ASMR give me goose bump, oooh my....
Я до такой резки бумаги легко точу нож за пару тройку минут.
I now want to be a super-master at something. What grit was that big stone? This is also used in katana sharpening for sure. God bless Japan.
I cannot know for certain and am no expert, but I would have to imagine that the largest wheel he used was the equivalent of 50-80 grit?
Where is this in Japan ? I really want to go n see this
日本の大阪府堺市です
Ощущение туристического аттракциона. Да и хэнд мейд в сегодняшних реалиях - натягивание совы на глобус в погоне за высоким прайсом
Это не погоня за ценой, а сохранение традиций. Эти дедушки имеют звание "Живое национальное сокровище Японии", так что цена изделия здесь на последнем месте.
pls, where can I buy a knife made by him?
I am asking as an experienced specialist at what angle to sharpen single- and double-sided Japanese knives because I have such knives.
Это мега-профессионал. Он знает о заточке ножей всё
こんにちは、あなたの作品がとても気に入りました。フェルトサークルに研磨剤を接着するのに何を使っているのか教えてください。
das können die " Solinger" auch! Nur der Arbeitsplatz ist sauberer 😉😊
Nicht wirklich
Jaja Deutschen denken alles besser zu können..
Eu tenho uma faca dessas!
😍🤩
❤❤❤
What one of those knives he was working on cost in US $, please. That was truly a master at work!
Sem palavras
👌
❤
노무라쇼타로의 공방위치가 궁금합니다
Мастеру здоровья. Ничего нового не увидел
Это скорее старое
ah thank god theres no background music with this one.. tantogishi? not blacksmith?
❤❤
👍😎
Whats his name? Is it morihiro?
👏👏👏👍🇧🇷🥋
Mình muốn mua gửi về Viêt Nam đc ko ta.
Где купить его продукцию?
Türkiyedede çok güzel bıçak bilincini var onlara helal olsun
👍
mano o cara é tão comprometido ao trabalho que nao dá tempo nem de escovar os dentes, isso que é profissionalismo. Fica a dica ai pra quem quiser receber uma medalha do Sol Nascente do Imperador, nem ouse ir dar uma cagadinha no final da tarde.
👍🇮🇩
Japaner -das geilste Volk der Welt
Çok ilginç Büyük Ista.