KZhead
Ғылым және технология

We Found a 180HP Golf Cart! Yamaha R1 Swap!

Grind Hard Plumbing Co
2023 ж. 21 Қыр.
1 309 284 Рет қаралды
Жүктеу

We found a R1 crotch rocket swapped long travel golf kart with dual rate Fox shocks. This is the coolest toy we have found! Today we buy the golf kart dune buggy and put it to the test!
Check out our podcast @SentAndBent
Shop Grind Hard here! www.grindhardplumbingco.com/
contact@grindhardplumbingco.com
PO BOX 2370
Sandpoint ID
83864

Пікірлер

  • Pro tip: Have the shocks tuned.. Most people ignore tuning of the shocks that's a bad thing so have a custom shop tune the shocks you will thank me later 😊 ✌

    @scottdawson8844@scottdawson88447 ай бұрын

    • Truth. Suspension tuning can make a world of difference!

      @goosenotmaverick1156@goosenotmaverick11567 ай бұрын

    • I'm very very very seriously doubt these guys need any help from you they have a very successful KZhead channel and building stuff from scratch they don't need some keyboard warrior like you telling them how to build they know what the f*** they're doing

      @foxguyday@foxguyday7 ай бұрын

    • Looks to me they having a blast without the "pro" tip

      @jhljhl2207@jhljhl22077 ай бұрын

    • @@jhljhl2207 it can have its capabilities updated and upgraded without sacrificing fun, ya know? Might even gain some fun factor with more stability....

      @goosenotmaverick1156@goosenotmaverick11567 ай бұрын

    • Be neatoh for them to make a video with the suspension tuning cats explaining how they do it.

      @LionChavez@LionChavez7 ай бұрын

  • I love how much the boys have grown they really never disappoint Ethan is a master creator

    @adamthomas4638@adamthomas46387 ай бұрын

  • I hope you guys know how lucky you are (not that you haven't worked for it)! You have the best toys ever!

    @stevearnold100@stevearnold1007 ай бұрын

  • Yes guys, I am very bummed I missed the pick up trip. I literally dream of wheelies at night!

    @EdwinOlding@EdwinOlding7 ай бұрын

    • Swindled yaself bud

      @Sk1m_Beeble@Sk1m_Beeble7 ай бұрын

    • If you guys decide you need another, I’ve got a built race yamaha rhino with a rebuilt 08 r1 in it I’m getting ready to sell. I’ve had it and rebuilt it for the last 6 years. I’ve had my fun but I’m ready to let go. Down in Redmond Oregon!

      @johnantonsenschulz7692@johnantonsenschulz76927 ай бұрын

    • Great filming, man! Premium video, as always!

      @nathanielscholtens2812@nathanielscholtens28127 ай бұрын

  • Over 30k viewers in two hours, impressive. The golf cart is also impressive, can't wait to see the mods.

    @SolitaryCanid@SolitaryCanid7 ай бұрын

  • This is the kinda channel you give a like before you start watching 👍

    @finnheise2038@finnheise20387 ай бұрын

  • The drive shaft issue is called plunge. It's a thing when on race cars when you try to increase camber but it usually drives the end of the shaft into the diff and breaks mounts.

    @1one3_Racing@1one3_Racing7 ай бұрын

  • That golf cart is awesome. It instills the don't care my hat just flew off vibe.

    @michaelfrancis3558@michaelfrancis35587 ай бұрын

  • Time for your kind of upgrades !!! Can hardly wait to see what your going to do with it !

    @mikeshivvers5461@mikeshivvers54617 ай бұрын

  • It’s great to see Sam again. 🙏🏽

    @Travis47@Travis477 ай бұрын

  • I noticed right a way that the front tires seemed to be plowing a little when turning sharp, hence the tire squeal we heard. After viewing the rest of the video clearly some modifications are in order. No doubt the changes will only increase the fun and safety of the machine. Looking forward to more on this new Grind Hard driving Premium golf cart !

    @Charles53412@Charles534127 ай бұрын

    • the tire squeal is because its chain driven, so it acts like a spool rather than a regular differential, but yes, it doesnt turn well lol

      @jduggz272@jduggz2727 ай бұрын

  • This might be the coolest thing I’ve seen that wasn’t built on this channel!

    @JosephJonesboy88@JosephJonesboy887 ай бұрын

  • A couple months to dial it in before it's time to put skis and Traxx on it.. :) This was an Awesome find guys!

    @bryduhbikeguy@bryduhbikeguy7 ай бұрын

  • You need to put upgraded bits to take up the power of the R1 otherwise they'll keep breaking. If i'm not mistaken there's a modern kit made from billet that you can swap in old Buggies. I saw something when someone was restoring an old dune buggy on Discovery.

    @aserta@aserta7 ай бұрын

    • Oh please find and link!!

      @AZBADBOYz@AZBADBOYz7 ай бұрын

    • I ran 930 Porche CV's on my Baja. Way beefier

      @ephjay6t87@ephjay6t877 ай бұрын

    • @@AZBADBOYz YT dislikes links in comments and they ban the comment if you post stuff (at least that's been my experience). As @ephjay bellow said, it's likely a Porsche CV (there's even a picture of the different types of CV stacked side by side, and you can see the beef between what they have and what should be). A quick google shows plenty of people upgrading their bugs with it and even a handful of buggies. So that's possibly the same thing they used in the show. Looking even further into it, showed me the time the first posts about it on forums match the time i remember watching that show on TV, back when i still used one.

      @aserta@aserta7 ай бұрын

    • Farm PTO shafts will work.. but they're heavy

      @PureCountryof91@PureCountryof917 ай бұрын

    • @@ephjay6t87What people use in 1000hp sand rails might hold up to these guys.😂

      @SolitaryCanid@SolitaryCanid7 ай бұрын

  • Edwin achieving Joyous Luigi Laughter mode at 08:45 14:58 is always Priceless here. I’m looking forward to see how far “E-Z-Gone” is gonna be stretched by our dudes to achieve liftoff & escape velocity. Ed - we could use a Papa Olding check-in sometime. if you GHPCo fans don’t yet know of him, then you’ll see that nuts don’t fall too far from their tree when ya do…he gets OG Rad.

    @corporalclegg914@corporalclegg9147 ай бұрын

  • It's good to see Sam again. Is he going to become a permanent member of grind hard plumbing company again? 🎉🎉🎉🎉

    @darploin5071@darploin50717 ай бұрын

    • I hope not

      @azertyytreza8947@azertyytreza89477 ай бұрын

    • @@azertyytreza8947 ?? why?

      @hugenerd8994@hugenerd89947 ай бұрын

  • I would love to see this thing ripping, also would love to see you guys do some more disc golf one of my favorite hobbies!

    @theslayer2002@theslayer20027 ай бұрын

  • That’s really nicely done. Super impressed.

    @travelin_taco@travelin_taco7 ай бұрын

  • I believe this has potential to be the best build on this channel ! And obviously, that’s saying alot! I know these boyz are going to take this to an insane level!!!!

    @steviefigs4677@steviefigs46777 ай бұрын

  • You want Porsche 930 Turbo CV joints on there. They have a ton of articulation.

    @jamesdeath3477@jamesdeath34777 ай бұрын

  • The 60yr old cvs held on longer than the original now that's true workmanship

    @jasonfox6013@jasonfox60137 ай бұрын

  • That thing checks all the boxes to fit in with the GHPC toys! So sick!

    @prophez23@prophez237 ай бұрын

  • There's are great KZhead channels, then you have grind hard plumbing, hands down the mad scientist of youtube.. please never quit what you guys do I love seeing the new builds

    @krazied1gamingchannel170@krazied1gamingchannel1707 ай бұрын

  • Nice video bro 😎 your cinematography and effort you put into these videos are crazy. How do you not get burnt out lol your work ethic is insane

    @Aderin.@Aderin.7 ай бұрын

    • My guess is t hey are absolutely living their dream which makes burn out almost impossible. When you wake up and do the thing thats all you can think about, its a pretty powerful thing.

      @rhegafd@rhegafd7 ай бұрын

    • I always thought the same, lots of quality in “shenanigans” content but I absolutely love it, from the comedy to the drone shots, and obviously the rigs this is my favorite channel ❤

      @dedserious@dedserious7 ай бұрын

  • Nice find guys!!! This is gonna be an insane project. I’m still excited to see the upgrades for the diesel limo and the fire truck!!!

    @thehawkman4231@thehawkman42317 ай бұрын

  • What a find, it's properly fast on the sketchy side lol. Once you resolve the axles etc, you could run slightly taller tires and lower the suspension by about the same height the taller tires increased rideheight. You'll keep the same rideheight while lowering the CG and the risk for rollovers and it should help with cornering in general with greater grip and stability making it more fun to toss around. It would also help a bit with the sketchy steering (though you pointed to it needing work) since larger wheels/tires tend to slow down and soften steering response a bit though they may increase steering effort at higher speeds.

    @962RACER@962RACER7 ай бұрын

  • Keep that brilliant video's coming boys

    @lukewalton6969@lukewalton69697 ай бұрын

  • I'd say shortening the length of the arms and making the shafts thicker would be a better option than having the high center of gravity it has now and it seems like the steering angles aren't right because its sliding on the turns.... I'd like to see what this would be capable of w/ trailing arm suspension on the rear, that would look really cool since it's all wide open back there. 👍

    @xpndblhero5170@xpndblhero51707 ай бұрын

    • 99% of the time you snap a shaft it is at the end of the spline inside of the joint. If you make the shaft larger but keep the same joints you then end up with a more concentrated stress point at the spline runout. The spline diameter is dependent on the joint so no matter how big you make the shaft the dimensions of your original failure point remains the same. @10:44 you can see that the spline pitch dia is roughly the same diameter as the rest of the bar so going any bigger would just be adding rotational mass if not negatively impacting the strength. When designing some halfshafts for the overseas Asian market we were actually putting some healthy undercuts in the middle of the shaft to comply with crash test safety guidelines and in testing we would still break at the larger diameter end of spline. Hope this wasn't to much. I enjoy learning stuff on here and thought I would extend some knowledge I have learned from designing these things for 8 years.

      @BryanBeachy@BryanBeachy7 ай бұрын

    • Airbags or similar ride height adjustment I think would be cooler

      @zyeborm@zyeborm7 ай бұрын

    • @@BryanBeachy - Thank you.... I'm always open to new information, especially when I'm not an expert on the subject. 😁👍

      @xpndblhero5170@xpndblhero51707 ай бұрын

    • @@zyeborm - I feel like it would be better lower to the ground w/ a slightly narrower wheel base than what it has now... Also I think the trailing arms would look really cool, especially the way Ethan does them Ducati style/skeletonized.

      @xpndblhero5170@xpndblhero51707 ай бұрын

    • Have better hooked up tires will help too those aren't dirt tires

      @danblanzara3174@danblanzara31747 ай бұрын

  • I'd love to see your shopping cart at the drag strip lol. Imagine the launches with 4 rear wheels!

    @christophermorin9036@christophermorin90367 ай бұрын

  • I thought I saw you guys at the drag races in Eagle ID. I was on my way out on Saturday and didn't think of it until I passed ya. I got to the car and thought "that looked like Ethan and Will." Love the content, jeep it up guys!

    @Singh_1989@Singh_19897 ай бұрын

  • I'm thinking about those big paddle tires and how much more grip they will have. If it broke two drive shafts with the much smaller, and less grippy, wheels, the same drive shafts are going to fail the first time you floor the throttle. It needs stronger drive shafts before you go to the dunes.

    @TrevorDennis100@TrevorDennis1007 ай бұрын

  • You’re theory on the axle length sounds spot on, was my first thought when it popped the axle immediately after it hit some bumps on the dirt.

    @Alex50cc@Alex50cc7 ай бұрын

  • Sick can’t wait for this . Please tell your dog brings the golf ball back 😂😂😂

    @mitchelljames1452@mitchelljames14527 ай бұрын

  • This might be the single coolest golf cart I've ever seen. The chrome smoothie wheels are the perfect touch.

    @Acaidia@Acaidia7 ай бұрын

  • My boy was freakin out when he saw this. I built that cart about 18-20 years ago. This was the second build. The first was a little bigger. Built them forr the dunes. Modeled it off my buckshot x-5. So crazy to see that it still around and ripping.

    @thehunterlife5583@thehunterlife55837 ай бұрын

  • This is soo cool! Will it beat a modern SXS? No. Will it get more attention and put a bigger smile on your face than a modern SXS? YES!

    @jweatherly26@jweatherly267 ай бұрын

  • Great video as always dudes!! Hows the shop coming along?

    @anthonyromero8602@anthonyromero86027 ай бұрын

  • You guys always build and find the coolest stuff! Would love to have Ethan put a Hayabusa motor in my suzuki samurai!

    @shannondueling7697@shannondueling76977 ай бұрын

  • you guys seem to be very happy, congrats on the youtube success.

    @atlantaperimeter@atlantaperimeter7 ай бұрын

  • Love your videos watched most of them in 2weeks:) ❤ keep it up :)

    @bonafideONLY@bonafideONLY7 ай бұрын

  • I hope you guys beef up that roll cage. Im fairly confident you're going to be using it in the near future.

    @rhegafd@rhegafd7 ай бұрын

    • 😂😂😂

      @gondigondi7547@gondigondi75477 ай бұрын

    • Just wait till a tie rod snaps.

      @1980Baldeagle@1980Baldeagle7 ай бұрын

  • you guys are some of the coolest humans ever

    @danieltweit3702@danieltweit37027 ай бұрын

  • Looking forward to watching your upgrades

    @jeffheins6624@jeffheins66247 ай бұрын

  • Oh hell yeah!! You guys are playing one of my favorite little disc golf courses in Idaho!

    @snowspik@snowspik7 ай бұрын

  • The sound of that engine is pure GOLD!

    @Jasonoid@Jasonoid7 ай бұрын

  • I feel like the chain ate through the chain tensioner because its a stationary tensioner. If it was spring loaded it wouldnt have as much tension on it to where it chews through it. For sure need to see about a better braking situation in case you lose the axles for some reason. Awesome purchase though! Cant wait to see the improvements on it!

    @02f4irider@02f4irider7 ай бұрын

  • If you kill more CV's see if you can find softer clutch springs to drop the shock torque on them from landing jumps etc. Could also help to squat the suspension more so the CV's are straighter. I'd use an agressive dual-rate spring setup so it's super soft on droop and stiffens up a ton at ride-height. This will also help with body roll.

    @martylawson1638@martylawson16387 ай бұрын

  • Amazing toy guys.....really gets with the program!!

    @reddog543211@reddog5432117 ай бұрын

  • Can't wait to see you throw it on tracks this winter

    @NoKillsEver@NoKillsEver7 ай бұрын

  • This thing is sick love how you was easy on it in the neighborhood and as soon as you get it home full send 😂 love all yalls content

    @codywiggins9659@codywiggins96597 ай бұрын

  • I had the same CV joints problem with my 16valve swapped 84 Scirocco. It was slammed, so I raised the suspension 1" and replaced the CV joints and axles with 944, of course it's a little more involved than described but the 944 units are good for 300hp.

    @jamessimpson5452@jamessimpson54527 ай бұрын

  • This thing is absolutely premium!! What a ripper 😮

    @Iamdesignproducts@Iamdesignproducts7 ай бұрын

  • I need more of this

    @Dylan_knox@Dylan_knox7 ай бұрын

  • This is one of my favorite purchases you guys ha e made

    @tylermudge9118@tylermudge91187 ай бұрын

  • no way ya'll throwin discs lolllll, i love it!!!!

    @tctv4244@tctv42447 ай бұрын

  • I loved every minute of this video. If you going to drive that's the way you supposed to drive ! The next time y'all drive that's the way you drive! Whoa!

    @johnnyray34@johnnyray347 ай бұрын

  • it would be funny to see a video of yall taking it to the golf course and see what they think there

    @prodBrainShot@prodBrainShot7 ай бұрын

  • This thing would be so fun in a dune-like environment

    @travelin_taco@travelin_taco7 ай бұрын

  • That jack sounded like it was getting pleased.

    @kenjimarlin4056@kenjimarlin40567 ай бұрын

  • Rail tires on front, paddles out back, find some dunes or snow. SO cool.

    @CaseyGoff@CaseyGoff7 ай бұрын

  • EZ GONE is the PERFECT NAME! That is LEGIT! With a bit of tweaking and upgrades to driveline and those paddle tires it is gonna be a whole lotta fun in the dunes! Best Golf Cart build I have yet seen already. As Always, May God Bless you and yours! 😇

    @CLCIII@CLCIII7 ай бұрын

    • Legit*

      @Sun-ut9gr@Sun-ut9gr7 ай бұрын

    • @@Sun-ut9gr Right you are!

      @CLCIII@CLCIII7 ай бұрын

  • That thing is so insane, its awesome. Y'all should bring it down to the lake of the Ozarks, we have a couple of offroad parks that opened up in the past year. That thing would slay the hill climbs.

    @bobbymac9334@bobbymac93347 ай бұрын

  • Love that you guys went frolfing!… itd be a great video to see you guys play a round!… maybe call out the foundation guys, then take them to play on some of your toys!

    @timr4853@timr48537 ай бұрын

  • The sound of that R1 💪💪💪

    @nicolasjude3298@nicolasjude32987 ай бұрын

  • Coolest thing you guys have done 👍👍👍🏁🏁🏁

    @Zzus321@Zzus3217 ай бұрын

  • Love the vids guys!

    @user-yc8tj6iy1j@user-yc8tj6iy1j7 ай бұрын

  • You guys have some amazing toys. But that’s by far the nicest one you guys own now

    @ryankyser5243@ryankyser52437 ай бұрын

  • I think if your on Grind Hard Property you should wear a helmet and probably a chest protector!!! Another great starter vehicle to improve on!! Looks like fun!!!

    @Jasontodd74@Jasontodd747 ай бұрын

  • Put some tires on that thing so we can see some wheelies and maybe work on giving it a lower stance.

    @shortshorts920@shortshorts9207 ай бұрын

  • That thing is insane!

    @bikescarsandmore6156@bikescarsandmore61567 ай бұрын

  • Dude, this is awesome

    @Tower2Customs@Tower2Customs7 ай бұрын

  • Petition to let will take the shopping cart to the drag strip

    @JamesBeaucoup@JamesBeaucoup7 ай бұрын

  • Aye! Nice to see you guys on this side of town! I’m 10 minutes from firebird raceway!

    @markrobertson4497@markrobertson44977 ай бұрын

  • Grind Hard Plumbing 🪠 might need Arnold Palmer to hold their Lemonade and Ice 🧊 Tea while they drag race THAT golf ⛳️ Cart

    @markhottman2652@markhottman26527 ай бұрын

  • Once you've been down a dragstrip once, your hooked. I raced motorcycles in the 1/4 mile drags in highschool. I went on a mission for my Church and the day after I got home was opening drag races so yes you got it I was there.

    @georgec2069@georgec20697 ай бұрын

  • Now that looks fun, I really recomend front brakes, I would also build a reverse system from a starter motor one way bearing on the motor and revise the chain drive as the belt tensioner will last less time than skateboard wheel does, maybe a bearing not sure maybe just a slider would be better similar to dirt bikes in the 80's used.

    @Nickwillfixit@Nickwillfixit7 ай бұрын

  • That puppy is insanely bonkers! I'd go so far as to say it's pretty much the cat's pajamas.

    @csj9619@csj96197 ай бұрын

  • Sam is a gem!

    @imthewa1rus@imthewa1rus7 ай бұрын

  • That thing is so awesome. I love it. I want one.

    @chrisyork3714@chrisyork37147 ай бұрын

  • Grind hard is the greatest 💪

    @Frankie--da-fixer@Frankie--da-fixer7 ай бұрын

  • I love your videos!!! it’s amazing !!! I’m a mechanic from Germany and just amazed on the fact that something like that is even close to street legal 😂😂

    @MacBig2009@MacBig20097 ай бұрын

  • That thing is gnarly! Needs some shock valving or tuning done to it. Looks like it needs swaybars or beefier ones. It is such a crazy whacky machine. I love it! lol

    @FarmerFpv@FarmerFpv7 ай бұрын

  • cool machine! definitely looks like it needs sway bars lol

    @zudukaiKilo44@zudukaiKilo447 ай бұрын

  • I didn't think I could love your channel anymore, but then you added disc golf.

    @TheOnlyDaltonGang@TheOnlyDaltonGang7 ай бұрын

  • Hi grind hard❤. U guys are doing amazing 😮project am very enjoy watching and never miss any of your projects. I hope one day I will see u guys. ( from Sri Lanka ) wishing you guys wonderful time ahed ❤❤❤❤❤❤

    @restoreormakeit8944@restoreormakeit89447 ай бұрын

  • I recently bought an fz1, which has same motor as r1, was going to swap motor into my raptor 700, but riding the fz1 has been too much fun. That golf cart looks like so much fun, thats badass

    @brianammons6331@brianammons63317 ай бұрын

  • Man that is a mean azz golf cart right there boi

    @jamessavage503@jamessavage5037 ай бұрын

  • I just seen this on Facebook market place last week and thought about how cool it would be. I'm glad I get to see it in action

    @RickyStar999@RickyStar9997 ай бұрын

  • Ok, I definitely need to finish mine now!!!! 🤪

    @motomule@motomule7 ай бұрын

  • Seems like tuning/stiffer suspension and a sway bar would go a very long way with this

    @steffentysnes5302@steffentysnes53027 ай бұрын

  • I love seeing you guys doing the things i want but can't do

    @jaumdopaum@jaumdopaum7 ай бұрын

  • Hopefully this inspires moto mule to finish his golf cart build 🙏🤞

    @chantzwedekind945@chantzwedekind9457 ай бұрын

  • You guys play disc golf and build such awesome vehicles it is amazing. question what happened to the little pink mustang?

    @coalcloset8108@coalcloset81087 ай бұрын

  • Dudes road turns into his driveway. Heck yeah

    @j.a.r.family2576@j.a.r.family25767 ай бұрын

  • hey Will!! wats up with ur repsol ruckus build? im working on a honda elite 49cc with a 1000cc gixxer motor on it and want to do a comparison.

    @hoggzilla316@hoggzilla3167 ай бұрын

  • Firebird! Recognized our local strip from the first clip. My grandpa raced there every year for my whole childhood.

    @prestontiegs5022@prestontiegs50227 ай бұрын

  • A weight plate up between the front lower control arms might do you some good lol. Looks like a blast!

    @RChero1010@RChero10107 ай бұрын

  • It needs strap limiters it popped out the cup or no?

    @that_midsize_ranger800@that_midsize_ranger8007 ай бұрын

  • Justin is the man 💪🏻

    @dstndwns@dstndwns7 ай бұрын

  • Hi guys, The by you bought Golf Kart is really insane 😀. Send you love from the Netherlands

    @dickdegraaff5452@dickdegraaff54527 ай бұрын
KZhead