Building large Junkyard diorama, 1/64 scale, entire process
2024 ж. 9 Мам.
187 402 Рет қаралды
Welcome to my channel. Please like this video and subscribe to support my future work.
This is my largest project so far, it took almost two months to build. Lot of techniques can be seen in this video, including concrete making, weathering metal and plastic parts, making rust, making crushed cars, car press, scrap metal crusher and more.
Video by Slobodan Radelić
Cameras used:
- Xiaomi Redmi Note 9 Pro smartphone (video)
- Xiaomi Redmi Note 12 Pro 5G (video and photos)
- Canon EOS 2000D (photos)
Chapters:
0:00 - Intro
0:14 - Base
5:35 - Walls
7:29 - Fence
8:43 - Objects
18:47 - Wash
20:19 - Weathering
26:04 - Rust
32:09 - Crushing
35:24 - Finish
Using lego pieces to make a little square for straight lines? GENIUS!
These techniques are brilliant! The Seam tape for the fence was genius! Thanks for the idea!!
Glad it was helpful! I was using 3D printed mesh for fence before and I had all that time mesh seam tape in my house. Sometimes you have stuff around you all the time but you don't realise that you can use it.
@@WhattoRepair true that! Great thinking! I’m into kitbashing and prop design along with 1/64th scale matchbox dioramas as well. Love seeing what everyone builds here on KZhead. Keep up the awesome work!
Oh, great. I like your content, you have new sub.
@@WhattoRepair thank you! Our channel is mostly about cars and small projects but I have started recording some of my prop making and kitbashing and make another playlist 😁👍🏽
What a great eye for detail. Great job on recycling old cardboard.
Thanks.
Like how you are using that cardboard to make it look like tin for a roof and the siding and don't listen to those naysayers ignore them
This is a w video
😮vonito😊
I love wtaching diorama builds, this one is incredible! Rip to all the cars that contributed
Yes😅
Beautiful👍🏾 American Diorama makes great figures in different scales and themes. Theyd go great with this!!
I know for American Diorama figures and I like some of them but they are somewhat expensive to me. Shipping can be up to 30 usd, plus price of figures, one pack can cost up to 50 usd in my country, in Serbia. Problem is that some figures from 6-pack are usable to me and some are not. Sometimes I see pack where I can use only one figure. So right now I'm looking for good models for 3D printing. Diecast metal is better but 3D printing is cheaper and figures can be very nice.
Excellent build and some very helpful tips..thanks for sharing
The painting aspect of the project was off chain , Excellent Job !
Thank you.
great diorama.😃
Thanks 😀
“No cars were hurt in the making of this video”
The red hotwheels ferrari 430 they stopped making them and its pretty expensive if it was good condition but its bent😢😢
One word for the whole thing.. FANTASTIC !!!
Very very realistic built. 10 out of 10!
Yes I liked the way he done the building😊
Sehr schön und mit so viel Liebe zum Detail. .. gefällt mir sehr gut
Truly an amazing diorama ❤❤❤❤ super mega talented 😊
Thank you!
Love your parts bin. Very amusing video.
Really neat project , especially being a salvage yard I would really like to make one myself but I am going to use 1/24 scale models
I think you can use same techniques for any scale. Just cut junk into larger pieces. 😄
Awesome build. Definitely combining some of these techniques & my model rail hobby to build a junkyard switching layout 💪
Glad you like it!
Wow, great job. 👍🏼👍🏼
Phenomenal build. The video was nice to watch and inspirational as well.
Glad you enjoyed it!
I was just wondering why you kept measuring the same cardboard ? For the thickness ?
Because that cardboard comes in different thickness. At the beginning I was using 1 mm cardboard for concrete paving and 2 mm for shed walls. So people can see what I was using in terms of structural strenght.
Brilliant job buddy. Like your attention to detail. Like it!!!
Glad you like it
What an awesome diorama. I got a ton of ideas from this. Thanks for sharing!
Glad you liked it!
Using that old dump truck was genius
Very inspiring. Great stuff here. Incredible customs and so much more. Next level stuff.
Thank you.
Looks real!
An excellent job without a doubt. Just a suggestion, but what if you added lights and moving parts. I didn't know if you thought about that or not. It's still awesome. 😮
Yes, I'm planning to add lights. I ordered electronics online and I will record mounting process and upload video in the future. Im not sure when, but I will for sure.
@WhattoRepair super cool . Hopefully, I will see your results .
Nice work. Love the fencing design 👍🏽😎
What a load of junk! Awesome diorama sir, the car crusher is great even dirt/gravel is very real looking. I live right next an old junk yard and yours pretty spot on. Great video sir!
Awesome work! I have hundreds of loose cars at home and hope to make displays like this some day.. Also I have way too many new in boxes of Matchboxes i want to display as well.
very cool work
Very imaginative and clever ideas I am impressed with your thought process.
Very cool, I like it
Glad you like it
Very nice work! Thank you for the Lego tips 😉👍
I really like this only thing I would add is like barrels for fluids like gas oil a spot for the workers and a scale when you first pull in
Wow 😊😊😊
Tebrik ediyorum harika bir droma oldu elinize sağlık 👏👏👏👏👏👍
It looks great.
33:25 I found "that" red Porsche
Wow good diorama
Beautiful and lots of patience congratulations a feast for my eyes😊
Thank you! 🤗
Very very nice 😮👍👍👍
Thanks for the visit
I dig it man🎉😮
This is incredible, nice work! Subscribed 😉
Thank you for subscription.
No problem
Not half bad for 40 minutes !
Awesome 👍👍
Amazing, your diorama is brilliant!!!
Awesome work. Full watch and share. New subscriber to you today. Mike Espo . Big like 👍.
Thanks for the sub!
10/10 🔥🔥🔥🔥🔥❤❤
Very awesome hobby
It sure is
I love how natural this all looks, great job
Thank you! 😊
Nice job...
Looks good!
I would recommend a shifter for your loose material when spreading it, makes it easier and any left over can easily be put back
Junk junk junk 😍
Awesome to watch.
6:08 that’s a smart way to use Legos
Wicked cool
Awesome work got a new subscriber
Thanks for subbing
Love how he reused the broken cars he had around
I have picked a lot of tips with this build 🙏
Nice work
❤❤
Thank you very much 😊
I was thinking you were going to glue a magnet in the center of the claw and then dip it into the metal pieces so they would stick randomly to the magnet and look like it grabbed a big bunch of metal in its claw.
I was thinking about magnet too, but I decided for this solution. I even have second attachment for this "crane", it's real magnet in circular shape, but I forgot to take pictures of it.
Awesome work! I liked your method rusting up all the scrap. The cotton bud/grating fence was genius!
On enameled die cast, like the knuckle boom loader, spray it with a matte clear before weathering. Helps with washes especially.
Good advice. I have problems with weathering sometimes, it's too glossy. I didn't think I could use a matte spray.
@@WhattoRepair I use it when I want to weather hot wheels and keep the factory paint. Best to disassemble, it will make the windows fogged like shower door glass.
@@russellknight5288 Yes, because of solvents in spray.
Fab !!!!!!!!!!!!!!!!!!
37:33 Poor knight rider 😞
Perfetto
DOPE
💕
❤❤❤
Excellent work! What are you spraying on the corrugated carboard at 11.18 to remove the top layer?
This is just regular water. Glue in cardboard is water soluble, so when you spray water on cardboard you can remove the top layer after maybe one minute. I was spraying water again at 11:18 to remove debris of cardboard and to get clean corrugated surface.
You’re crazy
Nice build but ....saying what you are doing would help with following along Keep finding myself asking "ok ..whats that" or .."what are you doing that for?"
👍
were did you buy that crimp roller from please i would to buy one thank you.
I bought it on Aliexpress. It is used for squeezing toothpaste and other tubes, you can probably find it on other sites as well. Search "metal toothpaste tube squezeer". Watch out, it must be metal for bending aluminum cans. Because there are also cheaper plastic squeezers that can easily break.
Here is the product. If shipping is too high for your country, search another seller. But it should cost 4-5 USD together with shipping. www.aliexpress.com/item/1005006507017205.html?spm=a2g0o.productlist.main.93.35264075t9dKlH&algo_pvid=acd44854-f319-4454-9536-34d2bfbb6a81&algo_exp_id=acd44854-f319-4454-9536-34d2bfbb6a81-46&pdp_npi=4%40dis%21USD%216.59%213.82%21%21%216.59%213.82%21%402103246417097692851834478e057f%2112000037450770015%21sea%21SRB%21138171456%21&curPageLogUid=UY8BcdoiuGvS&utparam-url=scene%3Asearch%7Cquery_from%3A
Pretty good hand make 👍👍i love it Would u mind share the colour no or label on the sreen , i want to make it too 🙏
On which colour do you think? For this project I used mostly cheap chinese acrylic paints, generic brands without numbering and labels. I mix paints until I get color that I like. I also use pigments for concrete and masonry that I bought in bulk at a local hardware store. I use those pigments for making acrylic paints and for weathering. They are not super fine and some of them are too coarse for airbrush, but they are great for painting landscape.
Awesome work man. Where did you get that material handler?
I found it on Ebay. But it was from China. www.ebay.com/itm/255179780845?itmmeta=01HRM8WM1P2Q27SXFRJMXSHJQF&hash=item3b69e672ed:g:qbYAAOSw7VBhaSoo&itmprp=enc%3AAQAIAAAAwOQIAReTImE9haZ%2Bs0JKEza3LpAacFWcEY3mF86GCb9pnWaMUSjCS%2Fi0vFC4HDDtRltsZY8vW9XdQ%2FqFgtZarReoU3mkREt78fvNBRaxmaIQ9I6mg0JuefKQ%2F3Bri5SKb51dhfYAZWntb0D6Jp1kRJMLlougd3kLDKc3FkZg42ec6Xhz%2FUtHxfzlbj1jcicUpiKybrDttzg%2BG3avMuT2D%2Bzj5G9AUVV%2BSF66Rvm8aoEq8n5MRaspVgCf912FwxFN4A%3D%3D%7Ctkp%3ABk9SR6TB8ojFYw
The worst loss has to be that train car
I don't think it's a loss. I found that train car on a flea market with many other junk almost free, without base and wheels, in condition as you can see in the video. I don't have railroad tracks, trains or spare parts to repair that car, so this was the best purpose I could find for it.
love the build but disappointed on not a word spoken
I'm sorry but english is not my native language and I think I still have fear that my accent will sound pretty bad. Although I have better accent than many youtubers. I will probably start to record voice soon, because people want that.
Video speaks for itself👍🏻
I need to know how you made/ got the metal fences
Watch from here 7:30 and you will see how I made the fence. Metal poles are made out of cotton ear swabs, painted with silver marker. Fence was made out of drywall joint mesh tape, also painted in silver, with silver spray paint.
What do you use for the crusher ?
Which crusher are you referring to? Both car press and scrap grinder are made from various parts, you can see in the video some of the making process. I didn't put detailed build process in this video because it would be over one hour long. I will upload separate videos with detailed car press and scrap metal grinder building process. I hope I will have time to edit video in next month.
The one when you cut the trailer put wall.e at the end I was just wondering did you used card or metal plates for it?
What's that white powder you use with superglue? Does it activate the glue?
It's baking soda. Soda activates the glue instantly. I made a video about activating super glue, you can watch if you want to see how it works. Here's the video: kzhead.info/sun/ebKKg8Vrf5F7ZIk/bejne.htmlsi=UvGgcG3Vr58mIc1X
How come you're putting that black water paint or whatever on stuff?
That technique is called black wash. It's very thinned black acrylic paint. When you wash something with that solution it gets some black tint when it's dried, like in nature.
the one thing that annoys me is the material handler is a 1/87 scale model
Come on, speak a little to explain and make the video more helpful
Hot wheels Ferraris😢😢😢😢😢
Don't worry, it was Maisto Ferrari. 😉If we are thinking on the same car.
ض
ضغ٩
wasting cars and money
Jealous?
Dont waste our time.
What do you expect? This is a junkyard so there has to be broken cars.
How is it a waste?
ultramegasupper
Looks good!